Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] V. G. Ziemann, G. Angelova, M. Dohlus, and Y. A. Kot, “The XFEL Laser Heater”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP077, pp. 2695-2697.
[n] T. Dohmae, H. Inoue, K. Umemori, Y. Watanabe, and M. Yamanaka, “Production and Investigation of Superconducting 9-Cell Cavity Made of Large Grain Nb in KEK”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2141-2144. doi:10.18429/JACoW-IPAC2016-WEPMB012
[n] G. V. Stupakov, Y. T. Ding, and Z. Huang, “FEL and Optical Klystron Gain for an Electron Beam with Oscillatory Energy Distribution”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper MOPC46, pp. 130-133.
[n] R. Prazeres, F. Glotin, and J.-M. Ortega, “Analysis of the Periodic Spectral Gaps Observed in the Tuning Range of FELs with a Partial Waveguide”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUAAU01, pp. 184-191.
[n] D. Bruno, G. Ganetis, W. Louie, and J. Sandberg, “Overview of the AGS Cold Snake Power Supplies and the new RHIC Sextupole Power Supplies”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS090, pp. 637-639.
[n] L. H. Wu, J.-R. Chen, C. M. Cheng, G.-Y. Hsiung, C. S. Huang, and Y. T. Huang, “A Study of Vacuum Pressure in TPS Cells”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD024, pp. 2552-2554.
[n] T. Hellert et al., “Status of the Advanced Light Source”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1309-1312. doi:10.18429/JACoW-IPAC2024-TUPG37
[n] J. Salvesen, “Student Viewpoints on Career Pathways”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEUD2, pp..
[n] R. Veness et al., “Design of a High-precision Fast Wire Scanner for the SPS at CERN”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOPB79, pp. 259-262.
[n] E. Wallén, R. Kuravi, S. Marks, and C. Myers, “Magnetic measurements of the ALS-U magnets”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3650-3652. doi:10.18429/JACoW-IPAC2023-WEPM041
[n] M. R. Clausen et al., “The DoÔÇÖs and DonÔÇÖts in Process Controls - Lessons Learned Over 35 Years”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 1-5. doi:10.18429/JACoW-PCaPAC2018-WEC1
[n] G. Faillon, E. Boghossian, and Ph. Guid?®e, “High Power L-Band Klystrons for Linear Accelerator”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-14, pp. 559-561.
[n] J. T. McLain, R. H. Scott, and R. C. Vondrasek, “ECR2 performance upgrades at ATLAS”, in Proc. ECRIS'24, Darmstadt, Germany, Sep. 2024, paper TUA2, pp. 72-75.
[n] J. T. Yoskowitz et al., “Improving the Operational Lifetime of the CEBAF Photo-Gun by Anode Biasing”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2840-2842. doi:10.18429/JACoW-IPAC2021-WEPAB104
[n] H. Graafsma, “X-Ray Detectors at DESY”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper FRAAU02, pp. XX-XX.
[n] M. J. Grabski et al., “NEG Thin Film Coating Development for the MAX IV Vacuum System”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI044, pp. 3385-3387.
[n] D. B. Engel, R. Mueller, and P. Stange, “Virtualization Infrastructure within the Controls Environment of the Light Sources at HZB”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC005, pp. 1100-1102.
For LaTeX
Use Complete Form
For BibTeX
References
- V. G. Ziemann, G. Angelova, M. Dohlus, and Y. A. Kot, “The XFEL Laser Heater”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP077, pp. 2695-2697.
- T. Dohmae, H. Inoue, K. Umemori, Y. Watanabe, and M. Yamanaka, “Production and Investigation of Superconducting 9-Cell Cavity Made of Large Grain Nb in KEK”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2141-2144.
- G. V. Stupakov, Y. T. Ding, and Z. Huang, “FEL and Optical Klystron Gain for an Electron Beam with Oscillatory Energy Distribution”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper MOPC46, pp. 130-133.
- R. Prazeres, F. Glotin, and J.-M. Ortega, “Analysis of the Periodic Spectral Gaps Observed in the Tuning Range of FELs with a Partial Waveguide”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUAAU01, pp. 184-191.
- D. Bruno, G. Ganetis, W. Louie, and J. Sandberg, “Overview of the AGS Cold Snake Power Supplies and the new RHIC Sextupole Power Supplies”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS090, pp. 637-639.
- L. H. Wu, J.-R. Chen, C. M. Cheng, G.-Y. Hsiung, C. S. Huang, and Y. T. Huang, “A Study of Vacuum Pressure in TPS Cells”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD024, pp. 2552-2554.
- T. Hellert et al., “Status of the Advanced Light Source”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPG37, pp. 1309-1312.
- J. Salvesen, “Student Viewpoints on Career Pathways”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEUD2, this conference.
- R. Veness et al., “Design of a High-precision Fast Wire Scanner for the SPS at CERN”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOPB79, pp. 259-262.
- E. Wallén, R. Kuravi, S. Marks, and C. Myers, “Magnetic measurements of the ALS-U magnets”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM041, pp. 3650-3652.
- M. R. Clausen et al., “The DoÔÇÖs and DonÔÇÖts in Process Controls - Lessons Learned Over 35 Years”, in Proc. 12th International Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'18), Hsinchu City, Taiwan, Oct. 2018, pp. 1-5.
- G. Faillon, E. Boghossian, and Ph. Guid?®e, “High Power L-Band Klystrons for Linear Accelerator”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TH3-14, pp. 559-561.
- J. T. McLain, R. H. Scott, and R. C. Vondrasek, “ECR2 performance upgrades at ATLAS”, in Proc. 26th International Workshop on ECR Ion Sources (ECRIS'24), Darmstadt, Germany, Sep. 2024, paper TUA2, pp. 72-75.
- J. T. Yoskowitz et al., “Improving the Operational Lifetime of the CEBAF Photo-Gun by Anode Biasing”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2840-2842.
- H. Graafsma, “X-Ray Detectors at DESY”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper FRAAU02, pp. XX-XX.
- M. J. Grabski et al., “NEG Thin Film Coating Development for the MAX IV Vacuum System”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI044, pp. 3385-3387.
- D. B. Engel, R. Mueller, and P. Stange, “Virtualization Infrastructure within the Controls Environment of the Light Sources at HZB”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC005, pp. 1100-1102.
Back to search