Favourites
For Word
[n] A. Mikhailichenko, “Short Period SC Undulator”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAE010, pp. 1957-1959.
[n] M. B. Jaglarz, P. B. Borowiec, A. Kisiel, A. I. Wawrzyniak, and A. M. Marendziak, “Electron Beam Lifetime in SOLARIS Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2731-2733. doi:10.18429/JACoW-IPAC2017-WEPAB067
[n] J. Lauener and W. Sliwinski, “How to Design & Implement a Modern Communication Middleware Based on ZeroMQ”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 45-51. doi:10.18429/JACoW-ICALEPCS2017-MOBPL05
[n] L. J. Allen, “Operation and Improvements of the Fermilab 400MeV Linac”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP03, pp. 329-331.
[n] P. Gladkikh et al., “A Source of Synchrotron Radiation for Research and Technology Applications”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1480-1483.
[n] S. R. Walther, C. M. McKenna, and B. O. Pedersen, “Ion Sources for Commercial Ion Implanter Applications”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2088-2093.
[n] W. Kleeven et al., “Status and Results from the TR30 Cycltron Centre Region Model”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 434-437.
[n] M. Ostoja-Gajewski, “IT Infrastructure Tips and Tricks for Control System and PLC”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1158-1161. doi:10.18429/JACoW-ICALEPCS2017-THBPA05
[n] Yu. V. Korotaev, I. N. Meshkov, S. V. Mironov, A. O. Sidorin, and E. Syresin, “The Modified Betatron Prototype Dedicated to Electron Cooling”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP06J, pp. 1061-1063.
[n] Q. Wu, S. U. De Silva, Z. Li, Y. Luo, and B. P. Xiao, “EIC Crab Cavity Multipole Analysis and Their Effects on Dynamic Aperture”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 66-69. doi:10.18429/JACoW-IPAC2022-MOPOST009
[n] Ju. Wang and J. Volk, “Design and Simulation of Fast Pulsed Kicker/Bumper Units for the Positron Accumulator Ring at APS”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2706-2709.
[n] Y. Wei, C. P. Welsch, G. X. Xia, K. Hanahoe, O. Mete, and J. Smith, “Investigations into Dielectric Laser-Driven Accelerators using the CST and VSIM Simulation Codes”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2618-2620. doi:10.18429/JACoW-IPAC2015-WEPWA051
[n] V. Bharadwaj, R. Pitthan, J. Sheppard, H. Vincke, and J. W. Wang, “Heat Deposition in Positron Sources for ILC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPP039, pp. 2574-2576.
[n] Y. G. Tang, L. Wang, and C.-F. Wu, “Preliminary Research of HOM for 100MHz Superconducting Cavity in the Pre-Research Project of HALS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 649-651. doi:10.18429/JACoW-IPAC2019-MOPRB033
[n] J.-C. Gayde et al., “The potential contribution of a structured laser beam to accelerator alignment technology”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4044-4046. doi:10.18429/JACoW-IPAC2023-THPA041
[n] G. I. Cancelo, B. Chase, Y. I. Eidelman, S. Nagaitsev, and N. Solyak, “Longitudinal Dynamic Analysis for the Project X 3-8 GeV Pulsed Linac”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB062, pp. 618-620.
[n] O. Holme, J. A. R. Arroyo Garcia, P. Golonka, M. Gonzalez-Berges, and H. Milcent, “Integrating Controls Frameworks: Control Systems for NA62 LAV Detector Test Beams”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMN020, pp. 285-288.
[n] T. S. Mattison, R. L. Cassel, A. R. Donaldson, and G. Gross, “Fast and Reliable Kicker Magnets for the SLC Damping Rings”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAR06, pp. 1915-1917.
[n] T. Katayama, T. Kikuchi, F. Nolden, G. Schreiber, M. Steck, and H. Stockhorst, “Simulation Study of Barrier Bucket Accumulation with Stochastic Cooling at the GSI ESR”, in Proc. COOL'11, Alushta, Ukraine, Sep. 2011, paper TUPS19, pp. 136-139.
[n] D. Fernandez-Carreiras et al., “Alba, the PLC Based Protection Systems”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEC003, pp. 397-399.
[n] O. Capatina et al., “Mechanical Design Considerations for =1 Cavities”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper THIOA06, pp. 650-658.
[n] L. Wartski, M. Bolore, G. Filippi, J. Lasalle, and S. Roland, “Thin Films of Linac Beams as Non-Destructive Devices for Particle Beam Intensity, Profile, Centering and Energy Monitors”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1552-1558.
[n] M. G. Mazarakis et al., “Experimental Investigation of Certain Beam Transport Issues in a Pulsed Transmission Line Linear Accelerator”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper FRQ0004, pp. 466-468.
[n] T. Honma, M. Fujioka, and T. Shinozuka, “Properties of a Permanent-Magnet Dipole with Variable Field Strength and Polarity”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-17, pp. 233-236.
[n] G. Dugan et al., “Proton Extraction and Transport for PBar Production in Tevatron I”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3009-3012.
[n] J. Heim et al., “Wiggler Insertion of the PEP-II B-Factory LER”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAA03, pp. 527-529.
[n] M. G. Mazarakis et al., “'Smile'' a New Version for the RADLAC II Linear Accelerator”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU448, pp. 438-440.
[n] Y. Lin, R. Chen, D. Li, D. Tong, and L. Zhou, “A Novel Traveling Wave DAW Accelerating Structure”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-36, pp. 617-619.
For LaTeX
Use Complete Form
For BibTeX
References
- A. Mikhailichenko, “Short Period SC Undulator”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAE010, pp. 1957-1959.
- M. B. Jaglarz, P. B. Borowiec, A. Kisiel, A. I. Wawrzyniak, and A. M. Marendziak, “Electron Beam Lifetime in SOLARIS Storage Ring”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2731-2733.
- J. Lauener and W. Sliwinski, “How to Design & Implement a Modern Communication Middleware Based on ZeroMQ”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 45-51.
- L. J. Allen, “Operation and Improvements of the Fermilab 400MeV Linac”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TUP03, pp. 329-331.
- P. Gladkikh et al., “A Source of Synchrotron Radiation for Research and Technology Applications”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1480-1483.
- S. R. Walther, C. M. McKenna, and B. O. Pedersen, “Ion Sources for Commercial Ion Implanter Applications”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2088-2093.
- W. Kleeven et al., “Status and Results from the TR30 Cycltron Centre Region Model”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 434-437.
- M. Ostoja-Gajewski, “IT Infrastructure Tips and Tricks for Control System and PLC”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1158-1161.
- Yu. V. Korotaev, I. N. Meshkov, S. V. Mironov, A. O. Sidorin, and E. Syresin, “The Modified Betatron Prototype Dedicated to Electron Cooling”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP06J, pp. 1061-1063.
- Q. Wu, S. U. De Silva, Z. Li, Y. Luo, and B. P. Xiao, “EIC Crab Cavity Multipole Analysis and Their Effects on Dynamic Aperture”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 66-69.
- Ju. Wang and J. Volk, “Design and Simulation of Fast Pulsed Kicker/Bumper Units for the Positron Accumulator Ring at APS”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2706-2709.
- Y. Wei, C. P. Welsch, G. X. Xia, K. Hanahoe, O. Mete, and J. Smith, “Investigations into Dielectric Laser-Driven Accelerators using the CST and VSIM Simulation Codes”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2618-2620.
- V. Bharadwaj, R. Pitthan, J. Sheppard, H. Vincke, and J. W. Wang, “Heat Deposition in Positron Sources for ILC”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPP039, pp. 2574-2576.
- Y. G. Tang, L. Wang, and C.-F. Wu, “Preliminary Research of HOM for 100MHz Superconducting Cavity in the Pre-Research Project of HALS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 649-651.
- J.-C. Gayde et al., “The potential contribution of a structured laser beam to accelerator alignment technology”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA041, pp. 4044-4046.
- G. I. Cancelo, B. Chase, Y. I. Eidelman, S. Nagaitsev, and N. Solyak, “Longitudinal Dynamic Analysis for the Project X 3-8 GeV Pulsed Linac”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPB062, pp. 618-620.
- O. Holme, J. A. R. Arroyo Garcia, P. Golonka, M. Gonzalez-Berges, and H. Milcent, “Integrating Controls Frameworks: Control Systems for NA62 LAV Detector Test Beams”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMN020, pp. 285-288.
- T. S. Mattison, R. L. Cassel, A. R. Donaldson, and G. Gross, “Fast and Reliable Kicker Magnets for the SLC Damping Rings”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAR06, pp. 1915-1917.
- T. Katayama, T. Kikuchi, F. Nolden, G. Schreiber, M. Steck, and H. Stockhorst, “Simulation Study of Barrier Bucket Accumulation with Stochastic Cooling at the GSI ESR”, in Proc. 8th Workshop on Beam Cooling and Related Topics (COOL'11), Alushta, Ukraine, Sep. 2011, paper TUPS19, pp. 136-139.
- D. Fernandez-Carreiras et al., “Alba, the PLC Based Protection Systems”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEC003, pp. 397-399.
- O. Capatina et al., “Mechanical Design Considerations for =1 Cavities”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper THIOA06, pp. 650-658.
- L. Wartski, M. Bolore, G. Filippi, J. Lasalle, and S. Roland, “Thin Films of Linac Beams as Non-Destructive Devices for Particle Beam Intensity, Profile, Centering and Energy Monitors”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1552-1558.
- M. G. Mazarakis et al., “Experimental Investigation of Certain Beam Transport Issues in a Pulsed Transmission Line Linear Accelerator”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper FRQ0004, pp. 466-468.
- T. Honma, M. Fujioka, and T. Shinozuka, “Properties of a Permanent-Magnet Dipole with Variable Field Strength and Polarity”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper E-17, pp. 233-236.
- G. Dugan et al., “Proton Extraction and Transport for PBar Production in Tevatron I”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3009-3012.
- J. Heim et al., “Wiggler Insertion of the PEP-II B-Factory LER”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAA03, pp. 527-529.
- M. G. Mazarakis et al., “'Smile'' a New Version for the RADLAC II Linear Accelerator”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU448, pp. 438-440.
- Y. Lin, R. Chen, D. Li, D. Tong, and L. Zhou, “A Novel Traveling Wave DAW Accelerating Structure”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TH3-36, pp. 617-619.
Back to search