Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. B. Rosenthal et al., “First Results for a 50 MeV Beam Induced Fluorescence Monitor for Beam Profile Measurements”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 418-420. doi:10.18429/JACoW-IBIC2023-WEP030
[n] P. N. Ostroumov and F. Gerigk, “Closing Plenary Summary of Working Group E: High-Intensity Linacs & Rings: New Facilities and Concepts”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper CPL05, pp. 493-495.
[n] A. M. Sessler, “The Electron Ring Accelerator”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper G-2, pp. 606-607.
[n] A. P. Zhukov, S. Assadi, R. Dickson, V. Gaidash, and J. Pogge, “SNS BLM System Evolution: Detectors, Electronics, and Software”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP038, pp. 4853-4855.
[n] Z. Zaharieva, S. Jensen, J. Rolland Lopez De Coca, and A. Romero Marin, “Advantages and Challenges to the Use of On-line Feedback in CERN's Accelerators Controls Configuration Management”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC025, pp. 600-603.
[n] D. M. Haider et al., “Versatile Beamline Cryostat for the Cryogenic Current Comparator (CCC) for FAIR”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 78-81. doi:10.18429/JACoW-IBIC2019-MOPP007
[n] W. F. Frentrup, A. G. Gaupp, B. Kuske, A. M. Meseck, and M. S. Scheer, “Undulators for the BESSY Soft-X-Ray FEL”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper THPOS03, pp. XX-XX.
[n] V. A. Andreev et al., “Injector of High-current Multicharge Heavy Ions Beam for the TWAC Project”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP23H, pp. 755-757.
[n] R. Losito et al., “The PHIN Photoinjector for the CTF3 Drive Beam”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS059, pp. 2517-2519.
[n] P. J. Bell, V. H. Hardion, M. Lindberg, V. Martos, and M. Sj?Âstr?Âm, “A General Multiple-Input Multiple-Output Feedback Device in Tango for the MAX IV Accelerators”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1085. doi:10.18429/JACoW-ICALEPCS2019-WEPHA012
[n] M. G. Grzegrzolka, K. Czuba, and I. Rutkowski, “Concept of Cavity Simulator for European Spallation Source”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1666-1669. doi:10.18429/JACoW-ICALEPCS2017-THPHA123
[n] Ph. Gayet, E. Blanco Vinuela, B. Bradu, and R. Cirillo, “Online Analysis for Anticipated Failure Diagnostics of the CERN Cryogenic Systems”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1412-1415. doi:10.18429/JACoW-ICALEPCS2017-THPHA030
[n] Yu. Shatunov and V. Yakimenko, “Simulation of the Acceleration of Polarized Protons in Circular Accelerators”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAR31, pp. 3427-3430.
[n] H. Hotchi, “Status of J-PARC Commissioning”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper OPL02, pp. 6-15.
[n] S. West, J. W. Gray, and A. Morris, “Upgrade of the ISIS Main Magnet Power Supply”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT144, pp. 1467-1469.
[n] I. Neththikumara, G. A. Krafft, Y. Roblin, and B. Terzi, “Electron-Ion Collider Performance Studies With Beam Synchronization via Gear-Change”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 553-555. doi:10.18429/JACoW-NAPAC2019-TUPLO09
[n] T. Ladzinski, F. Havart, P. Ninin, E. Sanchez-Corral Mena, F. Valentini, and D. Vaxelaire, “New Concepts for Access Devices in the SPS Personnel Protection System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1608-1612. doi:10.18429/JACoW-ICALEPCS2017-THPHA099
[n] V. Ptitsin, S. Tepikian, and J. Wei, “BNL-Built LHC Magnet Error Impact Analysis and Compensation”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP43, pp. 1575-1577.
[n] A. M. Marendziak, M. Rozwadowski, T. Sobol, M. J. Stankiewicz, and A. I. Wawrzyniak, “Three Years of Operational Experience With the Solaris Vacuum System”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3888-3890. doi:10.18429/JACoW-IPAC2018-THPAL107
[n] H. Henke, “Diffraction Radiation of Charges Moving Past Conducting Screens”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 868-871.
[n] A. V. Feschenko, P. N. Ostroumov, S. A. Petronevich, and S. I. Sharamentov, “Precise Energy Measurement of the Continuous Proton Beam”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1409-1411.
[n] E. N. Shaposhnikova, “Intensity Upgrade Plans for CERN-LHC Injectors”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper OPL03, pp. 16-21.
[n] J.-Y. Raguin et al., “Progress in the Design of a New 150-MHz Flat Top Cavity for the PSI RING Cyclotron”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper WEPO018, pp. 241-244. doi:10.18429/JACoW-CYCLOTRONS2022-WEPO018
[n] W. Venturini Delsolaro et al., “Status of the SRF Systems at HIE-ISOLDE”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUBA01, pp. 481-487.
[n] R. D. Walton et al., “Mapping Developments at Diamond”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1111-1114. doi:10.18429/JACoW-ICALEPCS2015-THHB3O01
[n] Yu. A. Rogovsky and I. Nesterenko, “Calibration of the Electrostatic Beam Position Monitors for VEPP-2000”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD14, pp. 68-70.
[n] S. Lenz, W. Hauth, and E. Pivit, “Introduction of a New Class of High-Power Y-Junction Circulators: The 352MHz/1.5MW Type Designed for CERN/LEP”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1246-1249.
[n] C. M. Fortgang, L. B. Dauelsberg, C. Geisik, D. Liska, and R. E. Shafer, “Pulsed Taut-Wire Alignment of Multiple Permanent Magnet Quadrupoles”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU444, pp. 426-428.
[n] K. Zagar, L. R. Dalesio, M. R. Kraimer, and M. Sekoranja, “Evolution of the EPICS Channel Access Protocol”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper MOD005, pp. 40-42.
[n] N. Guillotin, J. Jacob, and V. Serriere, “Development of HOM Damped Copper Cavity for the ESRF”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH099, pp. 1244-1246.
[n] M. Chung et al., “Longitudinal Electron Bunch Shaping Experiments at the PAL-ITF”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 694-697. doi:10.18429/JACoW-FEL2015-WEP060
[n] N. Kuroda et al., “Development of MUSASHI, a Mono-energetic Ultra-slow Antiproton Beam Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC058, pp. 4188-4190.
[n] I. E. Campisi et al., “The Fundamental Power Coupler for the Spallation Neutron Source (SNS) Superconducting Cavities”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH153, pp. 1140-1142.
[n] J. Christie, E. Snedden, J. Henderson, and L. Corner, “Optimisation of a fibre-based two-colour balanced optical cross-correlator”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 795-799. doi:10.18429/JACoW-IBIC2025-WEPMO28
[n] R. B. Fiorito, S. E. Caldwell, S. G. Iversen, J. S. Ladish, X. K. Maruyama, and D. W. Rule, “Optical Transition Radiation Diagnostics for Low Emittance, High Energy, Charged Particle Beams”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1078-1081.
[n] S. Deghaye, M. Lamont, L. Mestre, M. Misiowiec, W. Sliwinski, and G. Kruk, “LHC Software Architecture [LSA] -- Evolution Toward LHC Beam Commissioning”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WOPA03, pp. 307-309.
[n] M. Ritzert, “Interfacing EPICS to the Widespread Platform Management Interface IPMI”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 746-748. doi:10.18429/JACoW-ICALEPCS2015-WEPGF024
[n] M. Wendt and T. Toyama, “Closing Plenary Summary of Working Group F: Diagnostics and Instrumentation for High-Intensity Beams”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper CPL06, pp. 496-498.
[n] E. Benedetto, I. V. Agapov, F. Follin, and V. Kain, “Fitting Algorithms for Optical and Beam Parameters in Transfer Lines with Application to the LHC Injection Line TI2”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP057, pp. 2647-2649.
[n] B. Di Girolamo et al., “The Monitoring of the Effects of Earth Surface Inclination With the Precision Laser Inclinometer for High Luminosity Colliders”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 210-212. doi:10.18429/JACoW-RUPAC2016-THCBSH04
[n] J. Lee et al., “Emittance Measurements at the PAL-XFEL Injector Test Facility”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 690-693. doi:10.18429/JACoW-FEL2015-WEP058
[n] S. G. Iversen, S. E. Caldwell, R. B. Fiorito, J. S. Ladish, and D. W. Rule, “Charged Particle Beam Divergence Measurements Using Transition Radiation”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 573-576.
[n] I. V. Chuvilo et al., “Test Facility for Nuclear Waste Transmutation Studies (Oral Poster)”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-32, pp. 128-130.
[n] K. W. Shepard, “Status of Superconducting RF Cavity Development”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1764-1769.
[n] A. J. Kimber, J. W. Gray, and A. Morris, “Redesign of the ISIS Main Magnet Power Supply Storage Choke”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT140, pp. 1455-1457.
[n] M. Huening and G. W. Foster, “Vector Sum Control of an 8 GeV Superconducting Proton Linac”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT150, pp. 1482-1484.
For LaTeX
Use Complete Form
For BibTeX
References
- G. B. Rosenthal et al., “First Results for a 50 MeV Beam Induced Fluorescence Monitor for Beam Profile Measurements”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper WEP030, pp. 418-420.
- P. N. Ostroumov and F. Gerigk, “Closing Plenary Summary of Working Group E: High-Intensity Linacs & Rings: New Facilities and Concepts”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper CPL05, pp. 493-495.
- A. M. Sessler, “The Electron Ring Accelerator”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper G-2, pp. 606-607.
- A. P. Zhukov, S. Assadi, R. Dickson, V. Gaidash, and J. Pogge, “SNS BLM System Evolution: Detectors, Electronics, and Software”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP038, pp. 4853-4855.
- Z. Zaharieva, S. Jensen, J. Rolland Lopez De Coca, and A. Romero Marin, “Advantages and Challenges to the Use of On-line Feedback in CERN's Accelerators Controls Configuration Management”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC025, pp. 600-603.
- D. M. Haider et al., “Versatile Beamline Cryostat for the Cryogenic Current Comparator (CCC) for FAIR”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 78-81.
- W. F. Frentrup, A. G. Gaupp, B. Kuske, A. M. Meseck, and M. S. Scheer, “Undulators for the BESSY Soft-X-Ray FEL”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper THPOS03, pp. XX-XX.
- V. A. Andreev et al., “Injector of High-current Multicharge Heavy Ions Beam for the TWAC Project”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP23H, pp. 755-757.
- R. Losito et al., “The PHIN Photoinjector for the CTF3 Drive Beam”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS059, pp. 2517-2519.
- P. J. Bell, V. H. Hardion, M. Lindberg, V. Martos, and M. Sj?Âstr?Âm, “A General Multiple-Input Multiple-Output Feedback Device in Tango for the MAX IV Accelerators”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1085.
- M. G. Grzegrzolka, K. Czuba, and I. Rutkowski, “Concept of Cavity Simulator for European Spallation Source”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1666-1669.
- Ph. Gayet, E. Blanco Vinuela, B. Bradu, and R. Cirillo, “Online Analysis for Anticipated Failure Diagnostics of the CERN Cryogenic Systems”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1412-1415.
- Yu. Shatunov and V. Yakimenko, “Simulation of the Acceleration of Polarized Protons in Circular Accelerators”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAR31, pp. 3427-3430.
- H. Hotchi, “Status of J-PARC Commissioning”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper OPL02, pp. 6-15.
- S. West, J. W. Gray, and A. Morris, “Upgrade of the ISIS Main Magnet Power Supply”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT144, pp. 1467-1469.
- I. Neththikumara, G. A. Krafft, Y. Roblin, and B. Terzi, “Electron-Ion Collider Performance Studies With Beam Synchronization via Gear-Change”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 553-555.
- T. Ladzinski, F. Havart, P. Ninin, E. Sanchez-Corral Mena, F. Valentini, and D. Vaxelaire, “New Concepts for Access Devices in the SPS Personnel Protection System”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1608-1612.
- V. Ptitsin, S. Tepikian, and J. Wei, “BNL-Built LHC Magnet Error Impact Analysis and Compensation”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUP43, pp. 1575-1577.
- A. M. Marendziak, M. Rozwadowski, T. Sobol, M. J. Stankiewicz, and A. I. Wawrzyniak, “Three Years of Operational Experience With the Solaris Vacuum System”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3888-3890.
- H. Henke, “Diffraction Radiation of Charges Moving Past Conducting Screens”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 868-871.
- A. V. Feschenko, P. N. Ostroumov, S. A. Petronevich, and S. I. Sharamentov, “Precise Energy Measurement of the Continuous Proton Beam”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1409-1411.
- E. N. Shaposhnikova, “Intensity Upgrade Plans for CERN-LHC Injectors”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper OPL03, pp. 16-21.
- J.-Y. Raguin et al., “Progress in the Design of a New 150-MHz Flat Top Cavity for the PSI RING Cyclotron”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper WEPO018, pp. 241-244.
- W. Venturini Delsolaro et al., “Status of the SRF Systems at HIE-ISOLDE”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUBA01, pp. 481-487.
- R. D. Walton et al., “Mapping Developments at Diamond”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1111-1114.
- Yu. A. Rogovsky and I. Nesterenko, “Calibration of the Electrostatic Beam Position Monitors for VEPP-2000”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD14, pp. 68-70.
- S. Lenz, W. Hauth, and E. Pivit, “Introduction of a New Class of High-Power Y-Junction Circulators: The 352MHz/1.5MW Type Designed for CERN/LEP”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1246-1249.
- C. M. Fortgang, L. B. Dauelsberg, C. Geisik, D. Liska, and R. E. Shafer, “Pulsed Taut-Wire Alignment of Multiple Permanent Magnet Quadrupoles”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU444, pp. 426-428.
- K. Zagar, L. R. Dalesio, M. R. Kraimer, and M. Sekoranja, “Evolution of the EPICS Channel Access Protocol”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper MOD005, pp. 40-42.
- N. Guillotin, J. Jacob, and V. Serriere, “Development of HOM Damped Copper Cavity for the ESRF”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH099, pp. 1244-1246.
- M. Chung et al., “Longitudinal Electron Bunch Shaping Experiments at the PAL-ITF”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 694-697.
- N. Kuroda et al., “Development of MUSASHI, a Mono-energetic Ultra-slow Antiproton Beam Source”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEC058, pp. 4188-4190.
- I. E. Campisi et al., “The Fundamental Power Coupler for the Spallation Neutron Source (SNS) Superconducting Cavities”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH153, pp. 1140-1142.
- J. Christie, E. Snedden, J. Henderson, and L. Corner, “Optimisation of a fibre-based two-colour balanced optical cross-correlator”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 795-799.
- R. B. Fiorito, S. E. Caldwell, S. G. Iversen, J. S. Ladish, X. K. Maruyama, and D. W. Rule, “Optical Transition Radiation Diagnostics for Low Emittance, High Energy, Charged Particle Beams”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1078-1081.
- S. Deghaye, M. Lamont, L. Mestre, M. Misiowiec, W. Sliwinski, and G. Kruk, “LHC Software Architecture [LSA] -- Evolution Toward LHC Beam Commissioning”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WOPA03, pp. 307-309.
- M. Ritzert, “Interfacing EPICS to the Widespread Platform Management Interface IPMI”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 746-748.
- M. Wendt and T. Toyama, “Closing Plenary Summary of Working Group F: Diagnostics and Instrumentation for High-Intensity Beams”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper CPL06, pp. 496-498.
- E. Benedetto, I. V. Agapov, F. Follin, and V. Kain, “Fitting Algorithms for Optical and Beam Parameters in Transfer Lines with Application to the LHC Injection Line TI2”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP057, pp. 2647-2649.
- B. Di Girolamo et al., “The Monitoring of the Effects of Earth Surface Inclination With the Precision Laser Inclinometer for High Luminosity Colliders”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 210-212.
- J. Lee et al., “Emittance Measurements at the PAL-XFEL Injector Test Facility”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 690-693.
- S. G. Iversen, S. E. Caldwell, R. B. Fiorito, J. S. Ladish, and D. W. Rule, “Charged Particle Beam Divergence Measurements Using Transition Radiation”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 573-576.
- I. V. Chuvilo et al., “Test Facility for Nuclear Waste Transmutation Studies (Oral Poster)”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper MO-32, pp. 128-130.
- K. W. Shepard, “Status of Superconducting RF Cavity Development”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1764-1769.
- A. J. Kimber, J. W. Gray, and A. Morris, “Redesign of the ISIS Main Magnet Power Supply Storage Choke”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT140, pp. 1455-1457.
- M. Huening and G. W. Foster, “Vector Sum Control of an 8 GeV Superconducting Proton Linac”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT150, pp. 1482-1484.
Back to search