Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] B. Mustapha, S. V. Kutsaev, and P. N. Ostroumov, “RF Design Optimization of a 176 MHz CW RFQ”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPMA05, pp. 990-992.
[n] G. Fuchert et al., “New Superconductive Undulator Designs for use with Laser Wakefield Accelerators”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper WEPC06, pp. 507-510.
[n] S. Li et al., “LCLS Injector Laser Profile Shaping Using Digital Micromirror Device”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1001-1004. doi:10.18429/JACoW-NAPAC2016-WEPOB49
[n] L. Seabra et al., “The AFP Detector Control System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1315-1319. doi:10.18429/JACoW-ICALEPCS2017-THMPA05
[n] H. Maesaka et al., “Recent Progress of RF and Timing System of XFEL/SPring-8”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUC002, pp. 85-89.
[n] A. Al-Adwan, “SESAME Microtron Control System Upgrade”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP066, pp. XX-XX.
[n] P. Tenenbaum, T. O. Raubenheimer, and A. Wolski, “Multi-Stage Bunch Compressors for the International Linear Collider”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPP034, pp. 2357-2359.
[n] I. Chaikovska et al., “Update on the FCC-ee positron source design studies”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 776-779. doi:10.18429/JACoW-IPAC2023-MOPL095
[n] L. Adler et al., “Synchrotron Emittance Analysis Procedure at MedAustron”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 490-493. doi:10.18429/JACoW-IBIC2018-WEPC02
[n] S. M. Gibson, G. E. Boorman, A. Bosco, T. Hofmann, U. Raich, and F. Roncarolo, “Experimental Results of a Compact Laserwire System for Non-Invasive H- Beam Profile Measurements at CERN's Linac4”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 544-547. doi:10.18429/JACoW-IBIC2016-TUPG77
[n] E. Y. Wildner et al., “Final Geometry of 1232 LHC Dipoles”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN086, pp. 359-361.
[n] V. V. Aleinikov, S. Pachtchenko, K. P. Sychev, and V. Zabanova, “Faraday Cup Selector for DC-280 Cyclotron”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 103-105. doi:10.18429/JACoW-IBIC2019-MOPP013
[n] G. Plass, “European Heavy Ion ICF Driver Development”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAG08, pp. 92-94.
[n] J. D. Gilpatrick et al., “Proposed Beam Position and Phase Measurements for the LANSCE Linac”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPB10, pp. 78-80.
[n] W. Koprek, B. Keil, and G. Marinkovic, “Overview of Applications and Synergies of a Generic FPGA-Based Beam Diagnostics Electronics Platform at SwissFEL”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 165-169. doi:10.18429/JACoW-IBIC2015-MOPB050
For LaTeX
Use Complete Form
For BibTeX
References
- B. Mustapha, S. V. Kutsaev, and P. N. Ostroumov, “RF Design Optimization of a 176 MHz CW RFQ”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPMA05, pp. 990-992.
- G. Fuchert et al., “New Superconductive Undulator Designs for use with Laser Wakefield Accelerators”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper WEPC06, pp. 507-510.
- S. Li et al., “LCLS Injector Laser Profile Shaping Using Digital Micromirror Device”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 1001-1004.
- L. Seabra et al., “The AFP Detector Control System”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1315-1319.
- H. Maesaka et al., “Recent Progress of RF and Timing System of XFEL/SPring-8”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUC002, pp. 85-89.
- A. Al-Adwan, “SESAME Microtron Control System Upgrade”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP066, pp. XX-XX.
- P. Tenenbaum, T. O. Raubenheimer, and A. Wolski, “Multi-Stage Bunch Compressors for the International Linear Collider”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPP034, pp. 2357-2359.
- I. Chaikovska et al., “Update on the FCC-ee positron source design studies”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL095, pp. 776-779.
- L. Adler et al., “Synchrotron Emittance Analysis Procedure at MedAustron”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 490-493.
- S. M. Gibson, G. E. Boorman, A. Bosco, T. Hofmann, U. Raich, and F. Roncarolo, “Experimental Results of a Compact Laserwire System for Non-Invasive H- Beam Profile Measurements at CERN's Linac4”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 544-547.
- E. Y. Wildner et al., “Final Geometry of 1232 LHC Dipoles”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN086, pp. 359-361.
- V. V. Aleinikov, S. Pachtchenko, K. P. Sychev, and V. Zabanova, “Faraday Cup Selector for DC-280 Cyclotron”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 103-105.
- G. Plass, “European Heavy Ion ICF Driver Development”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAG08, pp. 92-94.
- J. D. Gilpatrick et al., “Proposed Beam Position and Phase Measurements for the LANSCE Linac”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper TUPB10, pp. 78-80.
- W. Koprek, B. Keil, and G. Marinkovic, “Overview of Applications and Synergies of a Generic FPGA-Based Beam Diagnostics Electronics Platform at SwissFEL”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 165-169.
Back to search