Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. E. Laxdal et al., “Recent Progress in the Superconducting RF Program at TRIUMF/ISAC”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper MOP06, pp. 128-132.
[n] D. Van Winkle et al., “Commissioning of the LHC Low Level RF System Remote Configuration Tools”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA063, pp. 1479-1481.
[n] L. J. Chen et al., “Optimization of Staggered Array Undulator”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4171-4173. doi:10.18429/JACoW-IPAC2019-THPTS029
[n] L. Popielarski, L. J. Dubbs, K. Elliott, I. M. Malloch, R. Oweiss, and J. Popielarski, “Buffered Chemical Polishing Development for the =0.53 Half-Wave Resonator at Michigan State University”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO057, pp. 526-529.
[n] M. P. Kelly, M. Kedzie, and Z. C. Liu, “A Simple Second Sound Detection Technique for SRF Cavities”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO032, pp. 273-275.
[n] T. P. Hughes, D. C. Moir, and P. W. Allison, “Beam Injector and Transport Calculations for ITS”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAE08, pp. 1207-1209.
[n] R. L. Kustom, “Accelerator Technology in Tokamaks”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1233-1239.
[n] F. Nolden and J. X. Wu, “Signals from a Beam Performing Betatron Oscillations Using an Electrostatic Electrode Model with Rectangular Boundaries”, in Proc. COOL'15, Newport News, VA, USA, Sep.-Oct. 2015, paper MOPF09, pp. 51-54.
[n] J. E. Spencer, E. R. Colby, R. J. Noble, D. T. Palmer, and R. Siemann, “Beam Dynamics Studies for a Laser Acceleration Experiment”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAE028, pp. 2024-2026.
[n] S. Kwiatkowski et al., “quot;CAMSHAFTquot; Bunch Kicker Design for the ALS Storage Ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS114, pp. 3547-3549.
[n] K. Takayama et al., “Induction Synchrotron (3): Rapid Cycle Synchrotron and Slow Cycle Synchrotron (Hardware Components for the Upgrade of KEK 12 GeV-PS)”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH028, pp. 3287-3289.
[n] S. K. Kauffmann, D. M. Ritson, and Y. T. Yan, “Implementation of One-Turn Maps in SSCTRK Using ZLIB”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 339-342.
[n] R. A. Legg et al., “LCLS-II Cryomodule Production at JLab”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 163-167. doi:10.18429/JACoW-SRF2017-MOPB046
[n] Y. A. Svistunov and M. F. Vorogushin, “Design and Construction of CDTC Accelerating System”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI104, pp. 2810-2812.
[n] J. Y. Tang et al., “EPICS Software Development for SNS VME Based Timing and RTDL System”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP068, pp. XX-XX.
[n] D. Quatraro and G. Rumolo, “Non Relativistic Resistive Wall Wake Fields and Single Bunch Stability”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5PFP014, pp. 3217-3219.
[n] J. Corlett, C.-K. Ng, and S. R. Smith, “Effect of TE Mode Power on the PEP-II LER BPM System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P085, pp. 2116-2118.
[n] S. W. Mosko, J. A. Martin, E. D. Hudson, L. N. Howell, and M. L. Mallory, “A Heavy-ion Accelerator Facility Featuring a Separated-Sector Isochronous Cyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69A05, pp. XX-XX.
[n] B. Aune et al., “First Operation of MACSE the Saclay Pilot Superconducting Electron Linac”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2393-2396.
[n] T. Nakagawa, Y. Higurashi, T. Nagatomo, and J. Ohnishi, “Development of Riken 28 GHz SC-ECRIS for Production of Intense Metal Ion Beam”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 44-48. doi:10.18429/JACoW-ECRIS2018-TUA1
[n] R. Hettel et al., “SPEAR-III: A Brighter Source at SSRL”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6V049, pp. 838-840.
[n] Y. Suetsugu, H. Fukuma, M. T. F. Pivi, K. Shibata, and L. Wang, “Demonstration of Electron Clearing Effect by Means of Clearing Electrodes and Groove Structures in High-Intensity Positron Ring”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5RFP068, pp. 4689-4691.
[n] S. M. Polozov, W. A. Barth, T. Kulevoy, Y. Lozeev, S. Yaramyshev, and F. D. Dziuba, “Beam Dynamics Study for the New CW RFQ”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 268-270. doi:10.18429/JACoW-RUPAC2016-TUPSA026
[n] V. Balandin and N. Golubeva, “Notes on Relations between Slice and Projected Beam Parameters”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 689-691. doi:10.18429/JACoW-IPAC2017-MOPIK070
[n] S. Z. Li and M. J. Hogan, “Beam Diagnostics for FACET”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP241, pp. 565-567.
[n] A. Luccio and F. Pilat, “Insertion of Helical Siberian Snakes in RHIC”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAQ28, pp. 1453-1455.
[n] T. Plettner and R. L. Byer, “Proposed Tabletop Laser-driven Coherent X-Ray Source”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMS069, pp. 1332-1334.
[n] E. V. Bykov, A. M. Batrakov, O. V. Belikov, Ye. A. Gusev, and V. R. Kozak, “Automated System for Precision Current Sources Testing”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 589-591. doi:10.18429/JACoW-RUPAC2016-THPSC023
[n] R. Xiang et al., “The ELBE Accelerator Facility Starts Operation with the Superconducting RF Gun”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC003, pp. 1710-1712.
[n] J. D. Fox, T. Mastorides, C. H. Rivetta, D. Teytelman, and D. Van Winkle, “Lessons Learned from PEP-II LLRF and Longitudinal Feedback”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEOBM02, pp. 1953-1955.
[n] T. Sieber et al., “Acceleration of Radioactive Ions at REX-ISOLDE”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU301, pp. 289-293.
[n] T. Kuerzeder et al., “Infrastructure for Superconducting CH-Cavity Preparation at HIM”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2796-2799. doi:10.18429/JACoW-IPAC2018-WEPML045
[n] X. Huang, C. M. Ankenbrandt, S.-Y. Lee, and E. Prebys, “Fitting the Fully Coupled ORM for the Fermilab Booster”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPE055, pp. 3322-3324.
[n] Z. Y. Xie et al., “Upgrade of the Historical Data Query and Analysis System for HLS-II”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3928-3930. doi:10.18429/JACoW-IPAC2019-THPRB053
[n] H. Bartosik, S. Hancock, A. Huschauer, and V. Kain, “Space Charge Driven Beam Loss for Cooled Beams and Mitigation Measures in the CERN Low Energy Ion Ring”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 272-277. doi:10.18429/JACoW-HB2016-TUAM5X01
[n] S. W. Mosko, “RF System for a Proposed Heavy Ion Cyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69A16, pp. XX-XX.
[n] P. Cameron et al., “RHIC Third Generation PLL Tune System”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAB009, pp. 524-526.
[n] M.H.R. Donald et al., “Lattice Design for the High Energy Ring of the SLAC B-Factory (PEP-II)”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAA27, pp. 591-593.
[n] R. Eichhorn, F. M. Esser, B. Laatsch, G. Schug, H. Singer, and R. Stassen, “The Summarized Findings from the J??lich Halfwave Resonators”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP32, pp. 309-311.
[n] W. T. Weng and A. W. Chao, “Coupled Vibrational Modes of SLC Arc Magnet and Support system”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3663-3666.
[n] W. Abraham et al., “Design and Testing of the 2 MV Heavy Ion Injector for the Fusion Energy Research Program”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPA01, pp. 902-904.
[n] I. Hwang et al., “Coupling Diagnostics and Control at PLS Storage Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE011, pp. 4533-4535.
[n] D. R. Walz, E. Lewandowski, and A. McFarlane, “Beam Dumps, Stoppers and Faraday Cups at the SLC”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 551-553.
[n] H. Tian, M. J. Kelley, G. Ribeill, and C. E. Reece, “Surface roughness characterization of niobium subjected to incremental BCP and EP processing steps”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP04, pp. XX-XX.
[n] S. V. Milton, J. N. Galayda, and E. Gluskin, “The Advanced Photon Source Low-Energy Undulator Test Line”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3V021, pp. 877-879.
[n] W. Ebeling et al., “Superconducting Cavities at DESY”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-4, pp. XX-XX.
[n] C. K. Allen, M. Ikegami, and H. Sako, “RMS Envelope Back-Propagation in the XAL Online Model”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP082, pp. 832-834.
[n] A. Sessler and J. S. Wurtele, “Constraints on Laser-Driven Accelerators for a High Energy Linear Collider”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP083G, pp. 845-847.
[n] R. W. Moses, R. S. Christian, A. J. Dragt, and E. A. Heighway, “Scaling Laws for Abberations in Magnetic Quadrupole Lens Systems”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1764-1767.
[n] M. S. Zolotorev, E. D. Commins, J. W. ONeill, F. Sannibale, A. S. Tremsin, and W. Wan, “First Experimental Results from DEGAS, the Quantum Limited Brightness Electron Source”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEOBG04, pp. 1918-1920.
[n] R. L. Carlson, P. W. Allison, T. J. Kauppila, D. C. Moir, and R. N. Ridlon, “Electron-Beam Generation, Transport, and Transverse Oscillation Experiments Using the REX Injector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3192-3195.
[n] P. E. Evtushenko, T. E. Cowan, U. Lehnert, and P. Michel, “Design of High Power CW IR-THz Source for the Radiation Source ELBE Upgrade”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1702-1704. doi:10.18429/JACoW-IPAC2019-TUPRB012
[n] Y. Cai, J. Irwin, M. Sullivan, and Y. T. Yan, “Application of Model-Independent Analysis to PEP-II Rings”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH134, pp. 3555-3557.
[n] V. K. Ovchar et al., “The System of Power Supplies, Control and Modulation of Electron Gun for Free Electron Laser”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper TUPPB050, pp. 427-429.
[n] A. Opanasenko, “WAKEFIELD UNDULATOR FOR GENERATING X-RAYS”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper TUDP03, pp. XX-XX.
[n] A. Bosotti et al., “Accelerating Voltage Amplitude and Phase Stabilization for the Milan Superconducting Cyclotron”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1303-1306.
[n] L. Wang, W. Fang, J. L. Hirshfield, Y. Jiang, S. V. Shchelkunov, and Z. T. Zhao, “1st+2nd Harmonic Photocathode Bimodal Gun R&D”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2054-2057. doi:10.18429/JACoW-IPAC2019-TUPTS054
[n] B. Sayyar-Rodsari, E. Hartman, M. J. Lee, C. Schweiger, and Y. T. Yan, “Efficient Modeling of Nonlinear Beam Optics Using Parametric Model Independent Analysis”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper MPPE040, unpublished.
[n] T. Mastorides, P. Baudrenghien, J. D. Fox, C. H. Rivetta, J. Tuckmantel, and D. Van Winkle, “Modeling and Simulation of the Longitudinal Beam Dynamics-RF Station Interaction in the LHC Rings”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC125, pp. 3278-3280.
[n] K. Harada, Y. Kobayashi, T. Koseki, N. Nakamura, H. R. Sakai, and H. Takaki, “The Lattice Design of the Super SOR Light Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB014, pp. 857-859.
[n] D. Teytelman et al., “Design and Testing of Gproto Bunch-by-bunch Signal Processor”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH103, pp. 3038-3040.
[n] B. Steffen, M. K. Czwalinna, C. Gerth, and P. Peier, “First Electro-Optical Bunch Length Measurements from the European XFEL”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 338-341. doi:10.18429/JACoW-IBIC2018-WEOA03
[n] G. Arnolds-Mayer, W.-D. Moeller, A. Matheisen, and D. Proch, “Industrial Production of Superconducting Accelerating Cavities for HERA”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 938-941.
[n] M. J. de Loos, W. Leemans, and S. B. van der Geer, “Characterization of the 50 MeV ALS Linac Beam with Optical Transition Radiation”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1679-1682.
[n] R. E. Laxdal et al., “SCRF Activities for the ISAC-II Upgrade at TRIUMF”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper MOP06, pp. 45-47.
[n] J. R. Delayen, J. Mammosser, L. Phillips, and A. T. Wu, “Alternate Electrolyte Composition for Electropolishing of Niobium Surfaces”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PT014, pp. XX-XX.
[n] H. Stockhorst, T. Katayama, R. Maier, D. Prasuhn, R. Stassen, and L. Thorndahl, “Stochastic Cooling Developments for the HESR at FAIR”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP055, pp. 3491-3493.
[n] T. Lensch and T. Wamsat, “A Fast Wire Scanner System for the European Xfel and Its Impact on Safety Systems”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1290. doi:10.18429/JACoW-ICALEPCS2019-WEPHA086
[n] S. Casalbuoni, M. Hagelstein, D. Saez de Jauregui, and S. Schleede, “Electron Multipacting Can Explain the Pressure Rise in the ANKA Cold Bore Superconducting Undulator”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP069, pp. 2420-2422.
[n] A. Peters et al., “Operational Status and Further Enhancements of the HIT Accelerator Facility”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA006, pp. 73-75.
[n] M. Basten et al., “Development of a 217 MHz Superconducting CH Structure”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP060, pp. 563-565.
For LaTeX
Use Complete Form
For BibTeX
References
- R. E. Laxdal et al., “Recent Progress in the Superconducting RF Program at TRIUMF/ISAC”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper MOP06, pp. 128-132.
- D. Van Winkle et al., “Commissioning of the LHC Low Level RF System Remote Configuration Tools”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEA063, pp. 1479-1481.
- L. J. Chen et al., “Optimization of Staggered Array Undulator”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4171-4173.
- L. Popielarski, L. J. Dubbs, K. Elliott, I. M. Malloch, R. Oweiss, and J. Popielarski, “Buffered Chemical Polishing Development for the =0.53 Half-Wave Resonator at Michigan State University”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO057, pp. 526-529.
- M. P. Kelly, M. Kedzie, and Z. C. Liu, “A Simple Second Sound Detection Technique for SRF Cavities”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO032, pp. 273-275.
- T. P. Hughes, D. C. Moir, and P. W. Allison, “Beam Injector and Transport Calculations for ITS”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAE08, pp. 1207-1209.
- R. L. Kustom, “Accelerator Technology in Tokamaks”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1233-1239.
- F. Nolden and J. X. Wu, “Signals from a Beam Performing Betatron Oscillations Using an Electrostatic Electrode Model with Rectangular Boundaries”, in Proc. 10th Workshop on Beam Cooling and Related Topics (COOL'15), Newport News, VA, USA, Sep.-Oct. 2015, paper MOPF09, pp. 51-54.
- J. E. Spencer, E. R. Colby, R. J. Noble, D. T. Palmer, and R. Siemann, “Beam Dynamics Studies for a Laser Acceleration Experiment”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAE028, pp. 2024-2026.
- S. Kwiatkowski et al., “quot;CAMSHAFTquot; Bunch Kicker Design for the ALS Storage Ring”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS114, pp. 3547-3549.
- K. Takayama et al., “Induction Synchrotron (3): Rapid Cycle Synchrotron and Slow Cycle Synchrotron (Hardware Components for the Upgrade of KEK 12 GeV-PS)”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH028, pp. 3287-3289.
- S. K. Kauffmann, D. M. Ritson, and Y. T. Yan, “Implementation of One-Turn Maps in SSCTRK Using ZLIB”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 339-342.
- R. A. Legg et al., “LCLS-II Cryomodule Production at JLab”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 163-167.
- Y. A. Svistunov and M. F. Vorogushin, “Design and Construction of CDTC Accelerating System”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI104, pp. 2810-2812.
- J. Y. Tang et al., “EPICS Software Development for SNS VME Based Timing and RTDL System”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAP068, pp. XX-XX.
- D. Quatraro and G. Rumolo, “Non Relativistic Resistive Wall Wake Fields and Single Bunch Stability”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5PFP014, pp. 3217-3219.
- J. Corlett, C.-K. Ng, and S. R. Smith, “Effect of TE Mode Power on the PEP-II LER BPM System”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P085, pp. 2116-2118.
- S. W. Mosko, J. A. Martin, E. D. Hudson, L. N. Howell, and M. L. Mallory, “A Heavy-ion Accelerator Facility Featuring a Separated-Sector Isochronous Cyclotron”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69A05, pp. XX-XX.
- B. Aune et al., “First Operation of MACSE the Saclay Pilot Superconducting Electron Linac”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2393-2396.
- T. Nakagawa, Y. Higurashi, T. Nagatomo, and J. Ohnishi, “Development of Riken 28 GHz SC-ECRIS for Production of Intense Metal Ion Beam”, in Proc. 23th International Workshop on ECR Ion Sources (ECRIS'18), Catania, Italy, Sep. 2018, pp. 44-48.
- R. Hettel et al., “SPEAR-III: A Brighter Source at SSRL”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6V049, pp. 838-840.
- Y. Suetsugu, H. Fukuma, M. T. F. Pivi, K. Shibata, and L. Wang, “Demonstration of Electron Clearing Effect by Means of Clearing Electrodes and Groove Structures in High-Intensity Positron Ring”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5RFP068, pp. 4689-4691.
- S. M. Polozov, W. A. Barth, T. Kulevoy, Y. Lozeev, S. Yaramyshev, and F. D. Dziuba, “Beam Dynamics Study for the New CW RFQ”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 268-270.
- V. Balandin and N. Golubeva, “Notes on Relations between Slice and Projected Beam Parameters”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 689-691.
- S. Z. Li and M. J. Hogan, “Beam Diagnostics for FACET”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP241, pp. 565-567.
- A. Luccio and F. Pilat, “Insertion of Helical Siberian Snakes in RHIC”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAQ28, pp. 1453-1455.
- T. Plettner and R. L. Byer, “Proposed Tabletop Laser-driven Coherent X-Ray Source”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMS069, pp. 1332-1334.
- E. V. Bykov, A. M. Batrakov, O. V. Belikov, Ye. A. Gusev, and V. R. Kozak, “Automated System for Precision Current Sources Testing”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 589-591.
- R. Xiang et al., “The ELBE Accelerator Facility Starts Operation with the Superconducting RF Gun”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEC003, pp. 1710-1712.
- J. D. Fox, T. Mastorides, C. H. Rivetta, D. Teytelman, and D. Van Winkle, “Lessons Learned from PEP-II LLRF and Longitudinal Feedback”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEOBM02, pp. 1953-1955.
- T. Sieber et al., “Acceleration of Radioactive Ions at REX-ISOLDE”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU301, pp. 289-293.
- T. Kuerzeder et al., “Infrastructure for Superconducting CH-Cavity Preparation at HIM”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2796-2799.
- X. Huang, C. M. Ankenbrandt, S.-Y. Lee, and E. Prebys, “Fitting the Fully Coupled ORM for the Fermilab Booster”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPE055, pp. 3322-3324.
- Z. Y. Xie et al., “Upgrade of the Historical Data Query and Analysis System for HLS-II”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3928-3930.
- H. Bartosik, S. Hancock, A. Huschauer, and V. Kain, “Space Charge Driven Beam Loss for Cooled Beams and Mitigation Measures in the CERN Low Energy Ion Ring”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 272-277.
- S. W. Mosko, “RF System for a Proposed Heavy Ion Cyclotron”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69A16, pp. XX-XX.
- P. Cameron et al., “RHIC Third Generation PLL Tune System”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROAB009, pp. 524-526.
- M.H.R. Donald et al., “Lattice Design for the High Energy Ring of the SLAC B-Factory (PEP-II)”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAA27, pp. 591-593.
- R. Eichhorn, F. M. Esser, B. Laatsch, G. Schug, H. Singer, and R. Stassen, “The Summarized Findings from the J??lich Halfwave Resonators”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP32, pp. 309-311.
- W. T. Weng and A. W. Chao, “Coupled Vibrational Modes of SLC Arc Magnet and Support system”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3663-3666.
- W. Abraham et al., “Design and Testing of the 2 MV Heavy Ion Injector for the Fusion Energy Research Program”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPA01, pp. 902-904.
- I. Hwang et al., “Coupling Diagnostics and Control at PLS Storage Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPE011, pp. 4533-4535.
- D. R. Walz, E. Lewandowski, and A. McFarlane, “Beam Dumps, Stoppers and Faraday Cups at the SLC”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 551-553.
- H. Tian, M. J. Kelley, G. Ribeill, and C. E. Reece, “Surface roughness characterization of niobium subjected to incremental BCP and EP processing steps”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP04, pp. XX-XX.
- S. V. Milton, J. N. Galayda, and E. Gluskin, “The Advanced Photon Source Low-Energy Undulator Test Line”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3V021, pp. 877-879.
- W. Ebeling et al., “Superconducting Cavities at DESY”, in Proc. 2nd Int. Conf. RF Superconductivity (SRF'84), Geneva, Switzerland, Jul. 1984, paper SRF84-4, pp. XX-XX.
- C. K. Allen, M. Ikegami, and H. Sako, “RMS Envelope Back-Propagation in the XAL Online Model”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP082, pp. 832-834.
- A. Sessler and J. S. Wurtele, “Constraints on Laser-Driven Accelerators for a High Energy Linear Collider”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP083G, pp. 845-847.
- R. W. Moses, R. S. Christian, A. J. Dragt, and E. A. Heighway, “Scaling Laws for Abberations in Magnetic Quadrupole Lens Systems”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1764-1767.
- M. S. Zolotorev, E. D. Commins, J. W. ONeill, F. Sannibale, A. S. Tremsin, and W. Wan, “First Experimental Results from DEGAS, the Quantum Limited Brightness Electron Source”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEOBG04, pp. 1918-1920.
- R. L. Carlson, P. W. Allison, T. J. Kauppila, D. C. Moir, and R. N. Ridlon, “Electron-Beam Generation, Transport, and Transverse Oscillation Experiments Using the REX Injector”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3192-3195.
- P. E. Evtushenko, T. E. Cowan, U. Lehnert, and P. Michel, “Design of High Power CW IR-THz Source for the Radiation Source ELBE Upgrade”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1702-1704.
- Y. Cai, J. Irwin, M. Sullivan, and Y. T. Yan, “Application of Model-Independent Analysis to PEP-II Rings”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH134, pp. 3555-3557.
- V. K. Ovchar et al., “The System of Power Supplies, Control and Modulation of Electron Gun for Free Electron Laser”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper TUPPB050, pp. 427-429.
- A. Opanasenko, “WAKEFIELD UNDULATOR FOR GENERATING X-RAYS”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper TUDP03, pp. XX-XX.
- A. Bosotti et al., “Accelerating Voltage Amplitude and Phase Stabilization for the Milan Superconducting Cyclotron”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1303-1306.
- L. Wang, W. Fang, J. L. Hirshfield, Y. Jiang, S. V. Shchelkunov, and Z. T. Zhao, “1st+2nd Harmonic Photocathode Bimodal Gun R&D”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2054-2057.
- B. Sayyar-Rodsari, E. Hartman, M. J. Lee, C. Schweiger, and Y. T. Yan, “Efficient Modeling of Nonlinear Beam Optics Using Parametric Model Independent Analysis”, presented at the 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPE040, unpublished.
- T. Mastorides, P. Baudrenghien, J. D. Fox, C. H. Rivetta, J. Tuckmantel, and D. Van Winkle, “Modeling and Simulation of the Longitudinal Beam Dynamics-RF Station Interaction in the LHC Rings”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC125, pp. 3278-3280.
- K. Harada, Y. Kobayashi, T. Koseki, N. Nakamura, H. R. Sakai, and H. Takaki, “The Lattice Design of the Super SOR Light Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB014, pp. 857-859.
- D. Teytelman et al., “Design and Testing of Gproto Bunch-by-bunch Signal Processor”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH103, pp. 3038-3040.
- B. Steffen, M. K. Czwalinna, C. Gerth, and P. Peier, “First Electro-Optical Bunch Length Measurements from the European XFEL”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 338-341.
- G. Arnolds-Mayer, W.-D. Moeller, A. Matheisen, and D. Proch, “Industrial Production of Superconducting Accelerating Cavities for HERA”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 938-941.
- M. J. de Loos, W. Leemans, and S. B. van der Geer, “Characterization of the 50 MeV ALS Linac Beam with Optical Transition Radiation”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1679-1682.
- R. E. Laxdal et al., “SCRF Activities for the ISAC-II Upgrade at TRIUMF”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper MOP06, pp. 45-47.
- J. R. Delayen, J. Mammosser, L. Phillips, and A. T. Wu, “Alternate Electrolyte Composition for Electropolishing of Niobium Surfaces”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PT014, pp. XX-XX.
- H. Stockhorst, T. Katayama, R. Maier, D. Prasuhn, R. Stassen, and L. Thorndahl, “Stochastic Cooling Developments for the HESR at FAIR”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP055, pp. 3491-3493.
- T. Lensch and T. Wamsat, “A Fast Wire Scanner System for the European Xfel and Its Impact on Safety Systems”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1290.
- S. Casalbuoni, M. Hagelstein, D. Saez de Jauregui, and S. Schleede, “Electron Multipacting Can Explain the Pressure Rise in the ANKA Cold Bore Superconducting Undulator”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5RFP069, pp. 2420-2422.
- A. Peters et al., “Operational Status and Further Enhancements of the HIT Accelerator Facility”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA006, pp. 73-75.
- M. Basten et al., “Development of a 217 MHz Superconducting CH Structure”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP060, pp. 563-565.
Back to search