JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	M. Y. Huang, H. C. Liu, S. Wang, and S. Y. Xu, “Study on the Fixed Point Injection during the Beam Commissioning for CSNS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1017-1019. doi:10.18429/JACoW-IPAC2018-TUPAL005
[n]	M. L. Mallory et al., “Superconducting Cyclotron Magnet Coil Short”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-06, pp. 391-394. 
[n]	W. Fang, Q. Gu, Z. T. Zhao, and D. C. Tong, “The High Power Test Model of C-band Accelerating Structure for Compact XFEL at SINAP”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper THPB28, pp. 617-620. 
[n]	P. J. Bendt, B. H. Erkkila, and R. H. Stokes, “Design and Measured Characteristics of Minimum Loss Low-Velocity Helix Resonators”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 185-188. 
[n]	D. S. Barton and R. L. Witkover, “Plans for H- Acceleration in the AGS Linac”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S1-12, pp. 47-52. 
[n]	P. Michel et al., “Investigation and Improvement of Beam Stability at the ELBE FELs”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper FRAAU03, pp. 543-547. 
[n]	R. Bartoldus et al., “Characterization of Interaction-Point Beam Parameters Using the pp Event-Vertex Distribution Reconstructed in the ATLAS Detector at the LHC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC008, pp. 471-473. 
[n]	A. H. Li et al., “Measurement and Tuning of the RF Field for the CSNS DTL”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4210-4213. doi:10.18429/JACoW-IPAC2017-THPIK050
[n]	H. Hinterberger, J. Satti, C. Schmidt, R. Sheldon, and R. Yamada, “Bending Magnets of the NAL Main Accelerator”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 853-857. 
[n]	M. Kanazawa, K. Maeda, and K. Watanabe, “Beam Test with a New Control System of Acceleration in HIMAC”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP006, pp. 1538-1540. 
[n]	M. Justus, R. Jainsch, T. Kirschke, U. Lehnert, P. Michel, and W. Seidel, “Primary and Secondary Beam Stabilization at the ELBE Accelerator Facility”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THB005, pp. 656-658. 
[n]	B. Maly and A. Friedman, “Evolution of a Warm Bunched Electron Beam in a Free Drift Region”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP008, pp. 692-696. 
[n]	K. Eppley, N. M. Kroll, Z. Li, R. H. Miller, C. Nantista, and S. Tantawi, “A Four-Port Launcher for a Multi-moded DLDS Power Distribution System”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP30F, pp. 1779-1781. 
[n]	E. Mustafin et al., “Irradiation of Superconducting Magnet Components for FAIR”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper A-04, pp. 227-230. 
[n]	H. Jiang, P. Li, and T. G. Xu, “Measurements of Beam Halo by Wire Scanner Monitor”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 393-395. doi:10.18429/JACoW-IBIC2015-TUPB030
[n]	S. S. Kurennoy et al., “Normal-Conducting High Current RF Photoinjector for High Power CW FEL”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPE045, pp. 2866-2868. 
[n]	K. Soutome, M. Takao, and H. Tanaka, “Perturbative Approach to Nonlinear Chromaticity of a Circular Accelerator”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP4A04, pp. 1083-1085. 
[n]	T. Bhattacharjee et al., “Introduction of EPICS in VEC amp; SCC Control Systems”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA130, pp. 827-828. 
[n]	F. Cardelli, D. Alesini, M. Magi, L. Palumbo, F. Pellegrino, and V. Pettinacci, “Design of Linac with the New Gaskets Clamping Fabrication Technique”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 403-406. doi:10.18429/JACoW-IPAC2016-MOPMW005
[n]	Y. Zhao et al., “Optimisation of the FCC-ee Positron Source Using a HTS Solenoid Matching Device”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2003-2006. doi:10.18429/JACoW-IPAC2022-WEPOPT062
[n]	R. D. Edge, “Beam Handling”, in Proc. LINAC'63, New Heaven, CT, USA, Oct. 1963, paper 11-02, pp. 361-381. 
[n]	F. Y. Li, B. E. Carlsten, R. Garimella, C.-K. Huang, and T. J. Kwan, “Comparison of Numerical Methods for the Calculation of Synchrotron Radiation From Electrons”, presented at the NAPAC'19, Lansing, MI, USA, Sep. 2019, paper WEXBA4, unpublished. 
[n]	Y. Jung et al., “Heat Treatment for Jacketed Half-wave Resonator Cavity”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 482-484. doi:10.18429/JACoW-SRF2019-TUP031
[n]	E. Ciapala, P. Collier, and S. Hansen, “The LEP-RF System-Global Control Facilities and Application Software”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 848-851. 
[n]	L. Bobyleva and E. Perelstein, “On RMS Envelope Equation Problem for Nonlinear Motion”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP058G, pp. 1060-1062. 
[n]	J. L. Sun et al., “Commissioning of the Beam Instrumentation System of CSNS”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 7-10. doi:10.18429/JACoW-IBIC2020-MOAO03
[n]	L. Michelotti et al., “Optics of a Proton Driver”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPE007, pp. 1557-1559. 
[n]	H. Geng et al., “Sawtooth Effect in CEPC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2971-2973. doi:10.18429/JACoW-IPAC2017-WEPIK023
[n]	M. S. Avilov et al., “Status of VEPP-5 Preinjector”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU401, pp. 299-301. 
[n]	P. Ausset et al., “Development of the Beam Position Monitors System for the LINAC of SPIRAL2”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPC15, pp. 702-705. 
[n]	Y. Kato, T. Iida, and F. Sato, “Large Bore ECR Ion Source with Cylindorically Comb-Shaped Magnetic Fields Configuration”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper E-03, pp. 326-330. 
[n]	B. S. Park, K. R. Kim, and B. H. Choi, “Development of Uniform Irradiation Systems for Test Facilities of PEFP”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP19015, pp. XX-XX. 
[n]	A. Arkilic, D. B. Allan, T. A. Caswell, L. R. Dalesio, and W. K. Lewis, “Metadatastore: A Primary Data Store for NSLS-2 Beamlines”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 794-795. doi:10.18429/JACoW-ICALEPCS2015-WEPGF043
[n]	H. Tanaka, T. Ohshima, K. Soutome, M. Takao, and H. Takebe, “Optimization of Sextupole Strengths in a Storage Ring for Top-up Operation”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT076, pp. 1330-1332. 
[n]	M. C. Ross, R. K. Jobe, J. T. Seeman, J. C. Sheppard, and R. F. Stiening, “High Resolution Beam Profile Monitors in the SLC”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2003-2006. 
[n]	S. Grawunder et al., “Tracking of RRR Value and Microstructure in High Purity Niobium along the Production Chain from the Ingot to the Finished Cavity”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB072, pp. 435-437. 
[n]	K. Mahoney, O. Garza, E. Stitts, H. Areti, and M. O, “Jefferson Lab Personnel Safety Fast Beam Kicker System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3P062, pp. 3681-3683. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search