Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] L. Rivkin et al., “Bunch Lengthening in the SLC Damping Ring”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 634-637.
[n] T. Mori et al., “Field quality improvement of septum magnets for SuperKEKB injection system”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 301-303. doi:10.18429/JACoW-IPAC2023-MOPA109
[n] D. Wang et al., “100 km CEPC Parameters and Lattice Design”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2958-2961. doi:10.18429/JACoW-IPAC2017-WEPIK017
[n] T. Aoki, F. Ebina, C. Hori, Y. Nakashima, T. Seki, and T. Hae, “Betatron Frequencies in Cotangential Trajectory Accelerator for Proton Beam Therapy”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 485-487. doi:10.18429/JACoW-IPAC2018-MOPML035
[n] P. Goslawski et al., “BESSY III - status and overview”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 457-460. doi:10.18429/JACoW-IPAC2023-MOPA174
[n] T. Mimashi et al., “The Rejuvenation of TRISTAN Control System”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 85-88. doi:10.18429/JACoW-ICALEPCS1991-S02SRU08
[n] G. Kourkafas et al., “Acceleration and Measurement of Alpha Particles and Hydrogen Molecular Ions with the HZB Cyclotron”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1264-1266. doi:10.18429/JACoW-IPAC2021-MOPAB419
[n] T. Budd, F. Sartori, and R. C. Felton, “Real-Time Measurement and Control at JET -- Status 2007”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPA22, pp. 362-364.
[n] W. K. Lau et al., “CURRENT STATUS AND FUTURE DEVELOPMENT OF SRRC”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper MOB02, pp. XX-XX.
[n] B. Wang, Y. Wang, Y. Wei, C. H. Yu, and Y. Zhang, “A Correction Scheme for the Magnet Imperfection on the CEPC Collider Ring”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1346-1348. doi:10.18429/JACoW-IPAC2021-TUPAB007
[n] N. Iida et al., “Beam injection issues at SuperKEKB”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 832-835. doi:10.18429/JACoW-IPAC2023-MOPL120
[n] M. El Khaldi, W. Kaabi, P. Lepercq, and Y. Peinaud, “RF Coaxial Resonator for Investigating Multipactor Discharges on Metal and Dielectric Surfaces”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP096, pp. 1074-1076.
[n] E. Pozdeyev, “High Power Proton Sources for Neutrino Science”, presented at the IPAC'21, Campinas, Brazil, May 2021, paper THXX02, unpublished.
[n] I. Ivanenko, J. Franko, G. G. Gulbekian, and A. Semchenkov, “The Model of DC72 Cyclotron Magnet. The Research of the Sector Shimming Methods for Obtaining the Working Magnetic Field for Light and Heavy Ions Acceleration”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPDO040, pp. 2349-2351.
[n] M. C. Lin, G. H. Luo, L. H. Chang, T. Chen, T. T. Yang and C, and Ch. Wang, “THE TAIWAN LIGHT SOURCE AND SUPERCONDUCTING CAVITY”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEAM02, pp. XX-XX.
[n] C. L. Guo and Z. X. Xu, “1Hz CHOPPER TYPE QUADRUPOLE MAGNET POWER SUPPLY FOR SSRF BOOSTER”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper TUP070, pp. XX-XX.
[n] T. Kobayashi et al., “Plasma Lens and Plasma Wakefield Acceleration Experiments Using Twin Linacs”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3552-3555.
[n] H. Zheng, H. Cao, and Y. X. Chen, “Design of PLC Temperature Flow Acquisition System Based on EPICS”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 109-110. doi:10.18429/JACoW-PCaPAC2018-WEP31
[n] K. Yokoyama et al., “Coupler Matching Techniques for C-Band Accelerating Section”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT015, pp. 1431-1433.
[n] H. Mizuno, B. Hong, and T. Mimashi, “A WIDE-BAND PICK-UP FOR MEASURING BEAM SPECTRUM IN KEKB”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper TUP018, pp. XX-XX.
[n] S. Gayadeen and G. Rehm, “Performance of the Fast Orbit Feedback System with the Double-Double Bend Achromat Installed in Diamond Light Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1989-1991. doi:10.18429/JACoW-IPAC2017-TUPIK113
[n] Y. Kim et al., “Performance Test of Mass-Production of HWR Cryomodules for SCL32”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 491-494. doi:10.18429/JACoW-LINAC2022-TUPOGE06
[n] D. Stratakis, “Ionization Cooling Beamline for a Muon Collider”, presented at the COOL'21, Novosibirsk, Russia, Nov. 2021, paper S703, unpublished.
[n] L. van Riesen-Haupt and R. Tom?ís Garc?¡a, “The Impact of Beam Position Monitor Tilts on Coupling Measurements”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1342-1345. doi:10.18429/JACoW-IPAC2021-TUPAB006
[n] M. Lee and S. Kleban, “SLC Beam Line Error Analysis Using a Model-Based Expert System”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 767-770.
[n] A. Gaget et al., “EPICS control system for Beam Operation at Saraf Linac Accelerator”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1822-1827. doi:10.18429/JACoW-ICALEPCS2025-THPD098
[n] R. Chehab et al., “Progress in the Study and Construction of the TESLA Test Facility Injector”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPB22, pp. 998-1000.
[n] K. Akai and Y. Morita, “New Design of Crab Cavity for SuperKEKB”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT008, pp. 1129-1131.
[n] B. Kuske and P. Goslawski, “Further aspects of the deterministic lattice design approach for BESSY III”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3208-3211. doi:10.18429/JACoW-IPAC2023-WEPL039
[n] D. Raparia, A. Sukhanov, A. Cannavó, and E. Beebe, “Progress of polarized ion sources at BNL”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 828-832. doi:10.18429/JACoW-NAPAC2025-WEP070
[n] J. Choi, R. I. Farnsworth, T. V. Shaftan, G. J. Weiner, and X. Yang, “Database for NSLS-II Accelerator Operation”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2854-2856. doi:10.18429/JACoW-IPAC2017-WEPAB121
[n] R. Risler, J. Eenmaa, J. Jacky, I. Kalet, P. Wootton, and S. Lindbaeck, “Installation of the Cyclotron Based Clinical Neutron Therapy System in Seattle”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper J29, pp. 428-430.
[n] J. Bundesmann, A. Denker, and J. Holz auf der Heide, “Beam Properties at the Experimental Target Station of the Proton Therapy in Berlin”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 199-201. doi:10.18429/JACoW-CYCLOTRONS2019-TUP020
[n] N. Iida et al., “Cancellation of the Leak Field from Lambertson Septum for the Beam Abort System in the SuperKEKB”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2918-2921. doi:10.18429/JACoW-IPAC2017-WEPIK006
[n] C. Hernalsteens, C. Lannoy, O. K. Tuormaa, M. Vill?®n Basco, C. Wiesner, and D. Wollmann, “The Effect of a Partially Depleted Halo on the Criticality and Detectability of Fast Failures in the HL-LHC”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1866-1869. doi:10.18429/JACoW-IPAC2022-WEPOPT014
[n] M. Blaskiewicz et al., “Measuring Nonlinear Momentum Compaction in RHIC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH006, pp. 1665-1666.
[n] A. V. Demyanov, S. L. Bogomolov, G. G. Gulbekian, V. B. Kutner, and R. Ts. Oganessian, “Radioactive Beam Injector for Short-Lived Heavy Ions”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper D-06, pp. 355-358.
[n] St. Guenster et al., “VUV Optics Development for the Elettra Storage Ring FEL”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUCOS03, pp. XX-XX.
[n] J. Feikes et al., “First Commissioning Results of the Metrology Light Source”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN015, pp. 947-949.
[n] H. S. Xu and N. Wang, “The Influence of Chromaticity on Transverse Single-Bunch Instability in the Booster of HEPS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2968-2970. doi:10.18429/JACoW-IPAC2018-THPAF012
[n] R. Corsini et al., “Experimental Studies on Drive Beam Generation in CTF3”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP010, pp. 571-573.
[n] T. Kageyama et al., “Development of High-Power ARES Cavities”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9C006, pp. 2902-2904.
[n] N. H. Quyet et al., “Compact X-band (11.424 Ghz) Linac for Cancer Therapy”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT076, pp. 2670-2672.
[n] M. Bruchon, B. Visentin, and F. Eozenou, “Electropolishing on Single and MultiI-Cell: COMSOL Modelling”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP51, pp. XX-XX.
[n] D. V. Mitchell et al., “High Field Test Results of Superconducting 3.9-GHz Accelerating Cavities at FNAL”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper THP061, pp. 722-724.
[n] H. Ikeda, T. Mimashi, S. Nakamura, T. Oki, and S. Sasaki, “Fast Trigger System for Beam Abort System in SuperKEKB”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 754-756. doi:10.18429/JACoW-IPAC2022-MOPOMS048
[n] H. Wiedemann, “ELECTROMAGNETIC RADIATION FROM LOW ENERGY ELECTRON BEAMS”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper THBU05, pp. XX-XX.
[n] A. Amato, M. Castro, G. Cuttone, D. Giove, A. Paccalini, and G. Rivoltella, “Operational Experience with the Distributed Control System of the Milan Superconducting Cyclotron”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1111-1114.
[n] K. Cerff, W. Mexner, and T. Spangenberg, “The ANKA B-Field Test Facility Control System, based on a SPEC Macro Package Enhanced Setup”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper THPL014, pp. 156-158.
[n] K. Sennyu, H. Hara, and M. Matsuoka, “Design and fabrication of superconducting cavities for industrialization”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP48, pp. XX-XX.
[n] S. A. Belomestnykh and Y. Morita, “HF2014 Report of Working Group 5: Superconducting RF”, in Proc. HF'14, Beijing, China, Oct. 2014, paper SUS2H4, pp. 271-275.
[n] T. Shibata, K. Ishii, H. Matsumoto, N. Matsumoto, T. Sugimoto, and K. J. Kuanjun, “The Development of a New Low Field Septum Magnet System for Fast Extraction in Main Ring of J-PARC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 573-575. doi:10.18429/JACoW-IPAC2017-MOPIK033
[n] R. Ts. Oganessian, “105 cm Heavy Ion Isochronous Cyclotron for Applied Research”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 455-458.
[n] Y. Wang et al., “Optics Design for Cepc Double Ring Scheme”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2962-2964. doi:10.18429/JACoW-IPAC2017-WEPIK018
[n] J. H. Chen et al., “PRELIMINARY DESIGN OF FAST KICKER SYSTEM FOR BEPC II”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WECM05, pp. XX-XX.
[n] E. Acerbi et al., “The Milan Superconducting Cyclotron Project”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper CI-03, pp. 169-176.
[n] P. Buaphad et al., “9/6 MeV European S-band Linac Structure for Container Inspection System at RTX and KAERI”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 560-563. doi:10.18429/JACoW-IPAC2018-MOPML067
[n] O. Boine-Frankenheim et al., “A New High-Intensity Synchrotron SIS100 with Strong Bunch Compression for GSI”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH024, pp. 3278-3280.
[n] F. Eozenou, M. Bruchon, and J. Gantier, “Parameters Investigation for Niobium Electro-Polishing”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP71, pp. XX-XX.
[n] D. J. Xiao, C. P. Chu, and Y. S. Qiao, “Orbit Correction With Machine Learning”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2608-2610. doi:10.18429/JACoW-IPAC2019-WEPGW058
[n] X. Cui, H. Geng, Y. Y. Guo, and G. Xu, “Lifetime and Injection Considerations for CEPC”, in Proc. HF'14, Beijing, China, Oct. 2014, paper FRT1B4, pp. 85-86.
[n] M. G. Nagaenko, A. G. Artukh, P. Severgin, and V. A. Titov, “Beam Optics of Large Acceptance Magnetic Channel for Separation of Radiocative Nucliei”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1312-1315.
[n] K. Yokoyama et al., “Design and Performance of Optics for Multi-Energy Injector Linac”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper MOP008, pp. 46-48.
[n] N. Shigeoka, M. Kimura, S. Miura, and K. Okihira, “Production Status of Accelerator Components”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 658-661. doi:10.18429/JACoW-FEL2015-WEP038
[n] J. R. Zhang et al., “Overall Design of the CEPC Injector LINAC”, in Proc. eeFACT'18, Hong Kong, China, Sep. 2018, pp. 139. doi:10.18429/JACoW-eeFACT2018-TUPAB04
[n] K. Endo, K. Egawa, Z. Fang, and S. Yamanaka, “Magnet and RF Systems of Small Pulse Synchrotron for Radiotherapy”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT072, pp. 2661-2663.
[n] R. Huang, Z. G. He, Q. K. Jia, Y. Lu, and L. Wang, “Initial Design on the High Quality Electron Beam for the Hefei Advanced Light Source”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4605-4607. doi:10.18429/JACoW-IPAC2018-THPMK123
[n] X. Y. Zhang, F. S. He, Q. Ma, Z. H. Mi, P. Sha, and J. Y. Zhai, “Mechanical Design of a 650 MHz Superconducting RF Cavity for CEPC”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 471-474. doi:10.18429/JACoW-SRF2017-TUPB038
[n] P. Nghiem et al., “Optics for SOLEIL at 2.5 GeV”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4V020, pp. 1406-1408.
[n] Y. Han, “The low charge linac injector for the SAPS”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPG32, unpublished.
[n] S. Funkner et al., “Implementation of Ultra-Low Frequency Non-Linear Raman Spectroscopy with the Gun Laser at FLUTE”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4242-4244. doi:10.18429/JACoW-IPAC2018-THPMF072
[n] S. Wilkes, “Lifetime without Compromise”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1068-1070. doi:10.18429/JACoW-IPAC2023-MOPM036
[n] D. Stratakis, Z. Pavlovic, J. M. Grange, S-C. Kim, R. Miceli, and J. A. Zennamo, “Fermilab Muon Campus as a Potential Probe to Study Neutrino Physics”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 749-751. doi:10.18429/JACoW-NAPAC2016-WEPOA26
[n] J. L. Coacolo, C. Pagani, and L. Serafini, “TESLA Photo-Injector Simulation Giving High Quality Beams”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP098G, pp. 1289-1291.
[n] C. Chen et al., “DESIGN AND MEASUREMENT OF THE SSRF MAGNET PROTOTYPES”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper THP034, pp. XX-XX.
[n] S. Kamada, Y. Kamiya, and M. Kihara, “Lattice of Photon Factory Storage Ring”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3848-3851.
[n] D. Park, Y. J. Han, C. K. Kim, S. M. Chung, and I. S. Ko, “Operation Experiences for PLS Vacuum System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P020, pp. 3633-3635.
[n] L. Zang, I. R. Bailey, M. Korostelev, and A. Wolski, “Undulator Based Positron Source Optimization for CLIC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC034, pp. 4128-4130.
[n] G. H. Wei et al., “Beam Fast Extraction Tuning of the J-PARC Main Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB016, pp. 3918-3920.
For LaTeX
Use Complete Form
For BibTeX
References
- L. Rivkin et al., “Bunch Lengthening in the SLC Damping Ring”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 634-637.
- T. Mori et al., “Field quality improvement of septum magnets for SuperKEKB injection system”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA109, pp. 301-303.
- D. Wang et al., “100 km CEPC Parameters and Lattice Design”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2958-2961.
- T. Aoki, F. Ebina, C. Hori, Y. Nakashima, T. Seki, and T. Hae, “Betatron Frequencies in Cotangential Trajectory Accelerator for Proton Beam Therapy”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 485-487.
- P. Goslawski et al., “BESSY III - status and overview”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA174, pp. 457-460.
- T. Mimashi et al., “The Rejuvenation of TRISTAN Control System”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S02SRU08, pp. 85-88.
- G. Kourkafas et al., “Acceleration and Measurement of Alpha Particles and Hydrogen Molecular Ions with the HZB Cyclotron”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1264-1266.
- T. Budd, F. Sartori, and R. C. Felton, “Real-Time Measurement and Control at JET -- Status 2007”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WPPA22, pp. 362-364.
- W. K. Lau et al., “CURRENT STATUS AND FUTURE DEVELOPMENT OF SRRC”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper MOB02, pp. XX-XX.
- B. Wang, Y. Wang, Y. Wei, C. H. Yu, and Y. Zhang, “A Correction Scheme for the Magnet Imperfection on the CEPC Collider Ring”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1346-1348.
- N. Iida et al., “Beam injection issues at SuperKEKB”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL120, pp. 832-835.
- M. El Khaldi, W. Kaabi, P. Lepercq, and Y. Peinaud, “RF Coaxial Resonator for Investigating Multipactor Discharges on Metal and Dielectric Surfaces”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP096, pp. 1074-1076.
- E. Pozdeyev, “High Power Proton Sources for Neutrino Science”, presented at the 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, paper THXX02, unpublished.
- I. Ivanenko, J. Franko, G. G. Gulbekian, and A. Semchenkov, “The Model of DC72 Cyclotron Magnet. The Research of the Sector Shimming Methods for Obtaining the Working Magnetic Field for Light and Heavy Ions Acceleration”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPDO040, pp. 2349-2351.
- M. C. Lin, G. H. Luo, L. H. Chang, T. Chen, T. T. Yang and C, and Ch. Wang, “THE TAIWAN LIGHT SOURCE AND SUPERCONDUCTING CAVITY”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper WEAM02, pp. XX-XX.
- C. L. Guo and Z. X. Xu, “1Hz CHOPPER TYPE QUADRUPOLE MAGNET POWER SUPPLY FOR SSRF BOOSTER”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper TUP070, pp. XX-XX.
- T. Kobayashi et al., “Plasma Lens and Plasma Wakefield Acceleration Experiments Using Twin Linacs”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3552-3555.
- H. Zheng, H. Cao, and Y. X. Chen, “Design of PLC Temperature Flow Acquisition System Based on EPICS”, in Proc. 12th International Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'18), Hsinchu City, Taiwan, Oct. 2018, pp. 109-110.
- K. Yokoyama et al., “Coupler Matching Techniques for C-Band Accelerating Section”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPT015, pp. 1431-1433.
- H. Mizuno, B. Hong, and T. Mimashi, “A WIDE-BAND PICK-UP FOR MEASURING BEAM SPECTRUM IN KEKB”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper TUP018, pp. XX-XX.
- S. Gayadeen and G. Rehm, “Performance of the Fast Orbit Feedback System with the Double-Double Bend Achromat Installed in Diamond Light Source”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1989-1991.
- Y. Kim et al., “Performance Test of Mass-Production of HWR Cryomodules for SCL32”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 491-494.
- D. Stratakis, “Ionization Cooling Beamline for a Muon Collider”, presented at the 13th Workshop on Beam Cooling and Related Topics (COOL'21), Novosibirsk, Russia, Nov. 2021, paper S703, unpublished.
- L. van Riesen-Haupt and R. Tom?ís Garc?¡a, “The Impact of Beam Position Monitor Tilts on Coupling Measurements”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1342-1345.
- M. Lee and S. Kleban, “SLC Beam Line Error Analysis Using a Model-Based Expert System”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 767-770.
- A. Gaget et al., “EPICS control system for Beam Operation at Saraf Linac Accelerator”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1822-1827.
- R. Chehab et al., “Progress in the Study and Construction of the TESLA Test Facility Injector”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPB22, pp. 998-1000.
- K. Akai and Y. Morita, “New Design of Crab Cavity for SuperKEKB”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPT008, pp. 1129-1131.
- B. Kuske and P. Goslawski, “Further aspects of the deterministic lattice design approach for BESSY III”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL039, pp. 3208-3211.
- D. Raparia, A. Sukhanov, A. Cannavó, and E. Beebe, “Progress of polarized ion sources at BNL”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 828-832.
- J. Choi, R. I. Farnsworth, T. V. Shaftan, G. J. Weiner, and X. Yang, “Database for NSLS-II Accelerator Operation”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2854-2856.
- R. Risler, J. Eenmaa, J. Jacky, I. Kalet, P. Wootton, and S. Lindbaeck, “Installation of the Cyclotron Based Clinical Neutron Therapy System in Seattle”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper J29, pp. 428-430.
- J. Bundesmann, A. Denker, and J. Holz auf der Heide, “Beam Properties at the Experimental Target Station of the Proton Therapy in Berlin”, in Proc. 22nd Int. Conf. on Cyclotrons and their Applications (Cyclotrons'19), Cape Town, South Africa, Sep. 2019, pp. 199-201.
- N. Iida et al., “Cancellation of the Leak Field from Lambertson Septum for the Beam Abort System in the SuperKEKB”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2918-2921.
- C. Hernalsteens, C. Lannoy, O. K. Tuormaa, M. Vill?®n Basco, C. Wiesner, and D. Wollmann, “The Effect of a Partially Depleted Halo on the Criticality and Detectability of Fast Failures in the HL-LHC”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1866-1869.
- M. Blaskiewicz et al., “Measuring Nonlinear Momentum Compaction in RHIC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPPH006, pp. 1665-1666.
- A. V. Demyanov, S. L. Bogomolov, G. G. Gulbekian, V. B. Kutner, and R. Ts. Oganessian, “Radioactive Beam Injector for Short-Lived Heavy Ions”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper D-06, pp. 355-358.
- St. Guenster et al., “VUV Optics Development for the Elettra Storage Ring FEL”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper TUCOS03, pp. XX-XX.
- J. Feikes et al., “First Commissioning Results of the Metrology Light Source”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN015, pp. 947-949.
- H. S. Xu and N. Wang, “The Influence of Chromaticity on Transverse Single-Bunch Instability in the Booster of HEPS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2968-2970.
- R. Corsini et al., “Experimental Studies on Drive Beam Generation in CTF3”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP010, pp. 571-573.
- T. Kageyama et al., “Development of High-Power ARES Cavities”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9C006, pp. 2902-2904.
- N. H. Quyet et al., “Compact X-band (11.424 Ghz) Linac for Cancer Therapy”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT076, pp. 2670-2672.
- M. Bruchon, B. Visentin, and F. Eozenou, “Electropolishing on Single and MultiI-Cell: COMSOL Modelling”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TUP51, pp. XX-XX.
- D. V. Mitchell et al., “High Field Test Results of Superconducting 3.9-GHz Accelerating Cavities at FNAL”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper THP061, pp. 722-724.
- H. Ikeda, T. Mimashi, S. Nakamura, T. Oki, and S. Sasaki, “Fast Trigger System for Beam Abort System in SuperKEKB”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 754-756.
- H. Wiedemann, “ELECTROMAGNETIC RADIATION FROM LOW ENERGY ELECTRON BEAMS”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper THBU05, pp. XX-XX.
- A. Amato, M. Castro, G. Cuttone, D. Giove, A. Paccalini, and G. Rivoltella, “Operational Experience with the Distributed Control System of the Milan Superconducting Cyclotron”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1111-1114.
- K. Cerff, W. Mexner, and T. Spangenberg, “The ANKA B-Field Test Facility Control System, based on a SPEC Macro Package Enhanced Setup”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper THPL014, pp. 156-158.
- K. Sennyu, H. Hara, and M. Matsuoka, “Design and fabrication of superconducting cavities for industrialization”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP48, pp. XX-XX.
- S. A. Belomestnykh and Y. Morita, “HF2014 Report of Working Group 5: Superconducting RF”, in Proc. 55th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders - Higgs Factory (HF'14), Beijing, China, Oct. 2014, paper SUS2H4, pp. 271-275.
- T. Shibata, K. Ishii, H. Matsumoto, N. Matsumoto, T. Sugimoto, and K. J. Kuanjun, “The Development of a New Low Field Septum Magnet System for Fast Extraction in Main Ring of J-PARC”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 573-575.
- R. Ts. Oganessian, “105 cm Heavy Ion Isochronous Cyclotron for Applied Research”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 455-458.
- Y. Wang et al., “Optics Design for Cepc Double Ring Scheme”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2962-2964.
- J. H. Chen et al., “PRELIMINARY DESIGN OF FAST KICKER SYSTEM FOR BEPC II”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper WECM05, pp. XX-XX.
- E. Acerbi et al., “The Milan Superconducting Cyclotron Project”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper CI-03, pp. 169-176.
- P. Buaphad et al., “9/6 MeV European S-band Linac Structure for Container Inspection System at RTX and KAERI”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 560-563.
- O. Boine-Frankenheim et al., “A New High-Intensity Synchrotron SIS100 with Strong Bunch Compression for GSI”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH024, pp. 3278-3280.
- F. Eozenou, M. Bruchon, and J. Gantier, “Parameters Investigation for Niobium Electro-Polishing”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TUP71, pp. XX-XX.
- D. J. Xiao, C. P. Chu, and Y. S. Qiao, “Orbit Correction With Machine Learning”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2608-2610.
- X. Cui, H. Geng, Y. Y. Guo, and G. Xu, “Lifetime and Injection Considerations for CEPC”, in Proc. 55th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders - Higgs Factory (HF'14), Beijing, China, Oct. 2014, paper FRT1B4, pp. 85-86.
- M. G. Nagaenko, A. G. Artukh, P. Severgin, and V. A. Titov, “Beam Optics of Large Acceptance Magnetic Channel for Separation of Radiocative Nucliei”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1312-1315.
- K. Yokoyama et al., “Design and Performance of Optics for Multi-Energy Injector Linac”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper MOP008, pp. 46-48.
- N. Shigeoka, M. Kimura, S. Miura, and K. Okihira, “Production Status of Accelerator Components”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 658-661.
- J. R. Zhang et al., “Overall Design of the CEPC Injector LINAC”, in Proc. 62nd ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders (eeFACT'18), Hong Kong, China, Sep. 2018, pp. 139.
- K. Endo, K. Egawa, Z. Fang, and S. Yamanaka, “Magnet and RF Systems of Small Pulse Synchrotron for Radiotherapy”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT072, pp. 2661-2663.
- R. Huang, Z. G. He, Q. K. Jia, Y. Lu, and L. Wang, “Initial Design on the High Quality Electron Beam for the Hefei Advanced Light Source”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4605-4607.
- X. Y. Zhang, F. S. He, Q. Ma, Z. H. Mi, P. Sha, and J. Y. Zhai, “Mechanical Design of a 650 MHz Superconducting RF Cavity for CEPC”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 471-474.
- P. Nghiem et al., “Optics for SOLEIL at 2.5 GeV”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4V020, pp. 1406-1408.
- Y. Han, “The low charge linac injector for the SAPS”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPG32, unpublished.
- S. Funkner et al., “Implementation of Ultra-Low Frequency Non-Linear Raman Spectroscopy with the Gun Laser at FLUTE”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4242-4244.
- S. Wilkes, “Lifetime without Compromise”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM036, pp. 1068-1070.
- D. Stratakis, Z. Pavlovic, J. M. Grange, S-C. Kim, R. Miceli, and J. A. Zennamo, “Fermilab Muon Campus as a Potential Probe to Study Neutrino Physics”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 749-751.
- J. L. Coacolo, C. Pagani, and L. Serafini, “TESLA Photo-Injector Simulation Giving High Quality Beams”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP098G, pp. 1289-1291.
- C. Chen et al., “DESIGN AND MEASUREMENT OF THE SSRF MAGNET PROTOTYPES”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper THP034, pp. XX-XX.
- S. Kamada, Y. Kamiya, and M. Kihara, “Lattice of Photon Factory Storage Ring”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3848-3851.
- D. Park, Y. J. Han, C. K. Kim, S. M. Chung, and I. S. Ko, “Operation Experiences for PLS Vacuum System”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4P020, pp. 3633-3635.
- L. Zang, I. R. Bailey, M. Korostelev, and A. Wolski, “Undulator Based Positron Source Optimization for CLIC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEC034, pp. 4128-4130.
- G. H. Wei et al., “Beam Fast Extraction Tuning of the J-PARC Main Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEB016, pp. 3918-3920.
Back to search