JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	T. Flisgen, J. Heller, A. V. V?®lez, G. Zadeh, and U. van Rienen, “Computation of Eigenmodes in the BESSY VSR Cavity Chain by Means of Concatenation Strategies”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 253-259. doi:10.18429/JACoW-ICAP2018-TUPAG01
[n]	G. Huang, J. M. Byrd, L. R. Doolittle, J. W. Staples, and R. B. Wilcox, “Stable Transmission of Radio Frequency Signals on Fiber Links Using Interferometric Delay Sensing”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM081, pp. 372-374. 
[n]	H. Aoyagi et al., “Feasibility Tests of the Beam Halo Monitoring System for Protecting Undulator Permanent Magnets against Radiation Damage at XFEL/SPring-8”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB068, pp. 2851-2853. 
[n]	F.-T. Chung et al., “The Electronic System Design and Realization for First Set 500 MHz KEKB SRF Module High Power Test”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPME035, pp. 3588-3590. 
[n]	K. Sakaue et al., “Investigation of the Coherent Cherenkov Radiation Using Tilted Electron Bunch”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 905-907. doi:10.18429/JACoW-IPAC2017-MOPVA024
[n]	A. Bacci et al., “The Star Project”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2238-2241. doi:10.18429/JACoW-IPAC2014-WEPRO115
[n]	N. Towne, “Simulated Growth Rates for Single-Bunch Instabilities Driven by a Resistive Impedance”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB074, pp. 3168-3170. 
[n]	A. Andrews, C. F. Eckman, A. W. Hunt, Y. Kim, D. P. Wells, and K. H. Kim, “The First Development of an EPICS Control System for the IAC Accelerators”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPR017, pp. 4002-4004. 
[n]	H. Honma, S. Anami, A. Asami, T. Shidara, H. Sakaguchi, and Co. Ltd, “Improvements to the PFN Capacitors for the Klystron Modulators of the KEK 2.5 GeV Linac”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO466, pp. 235-237. 
[n]	W. Knulst, O. J. Luiten, M. J. van der Wiel, and J. Verhoeven, “A Tabletop Soft X-Ray Source based on 5-10 MeV LINACs”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP7B07, pp. 2609-2611. 
[n]	S. Otsuki, K. Koyama, M. Yoshida, Y. Matsumura, S. Mima, and M. Uesaka, “Development on On-chip Radiation Source using Dielectric Laser Accelerator”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1434-1436. doi:10.18429/JACoW-IPAC2014-TUPME037
[n]	Y. Arimoto et al., “Three Dimensional Field Analysis for Final Focus Magnet System at SuperKEKB”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2690-2692. doi:10.18429/JACoW-IPAC2014-WEPRI086
[n]	M. H. Awida, P. Berrutti, I. V. Gonin, T. N. Khabiboulline, and V. P. Yakovlev, “SSR1 HOM Analysis and Measurements”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC053, pp. 2333-2335. 
[n]	G. Spalek and J. Kuzminski, “High Power Variable Couplers for Ladder and Spoke Type Resonators”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH133, pp. 1089-1091. 
[n]	M. Notani, C. M. Ankenbrandt, R. P. Johnson, T. J. Roberts, and C. Bowman, “Handling GEM*STER Volatile Radioactive Fission Products”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPR062, pp. 4115-4117. 
[n]	D. A. Constable et al., “High Efficiency Klystron Development for Particle Accelerators”, in Proc. eeFACT'16, Daresbury, UK, Oct. 2016, pp. 185-187. doi:10.18429/JACoW-eeFACT2016-WET3AH2
[n]	K. Nanbu et al., “Development Status of Linear Focal Cherenkov Ring Camera”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 152-154. doi:10.18429/JACoW-IPAC2016-MOPMB029
[n]	C. Liu, T. Fujiwara, M. Uesaka, and J. Kusano, “Backscattering X-ray System by using 950 keV X-band Linac X-ray Source”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2209-2211. doi:10.18429/JACoW-IPAC2014-WEPRO104
[n]	T. Miura et al., “Performance of RF System for Compact-ERL Main Linac at KEK”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2450-2452. doi:10.18429/JACoW-IPAC2014-WEPME073
[n]	Y. Taira, H. Kato, R. Kuroda, and H. Toyokawa, “Development of a C-band RF Gun with a Coniferous-tree-type Carbon Nanostructure Field Emission Cathode”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2545-2547. doi:10.18429/JACoW-IPAC2015-WEPWA024
[n]	F. Albert et al., “Narrow Band Optimization of a Compton Gamma-Ray Source Produced From an X-Band Linac”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP011, pp. 592-594. 
[n]	Y. Taira, R. Kuroda, M. Tanaka, H. Toyokawa, K. Sakaue, and H. Tomizawa, “Development of Non-Invasive Electron Beam Position Monitor Based on Coherent Diffraction Radiation from a Slit”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper TUPD12, pp. 442-446. 
[n]	T. Itoga, Y. Asano, and X.-M. Mar?®chal, “Fiber Beam Loss Monitor for the SPring-8 X-FEL: A Numerical Study of its Design and Performance”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB062, pp. 2833-2835. 
[n]	S. B. van der Geer, O. J. Luiten, and M. J. de Loos, “Pancakes versus Beer-cans in Terms of 6D Phase-space Density”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC036, pp. 151-153. 
[n]	R. M. Brodhage, A. Almomani, and U. Ratzinger, “Design Study of a High Frequency Proton Ladder RFQ”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO014, pp. 3788-3790. 
[n]	J. M. Seok, M. Chung, J. H. Han, J. H. Hong, and H.-S. Kang, “Optimization of the Dechirper for Electron Bunches of Arbitrary Longitudinal Shapes”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1054-1056. doi:10.18429/JACoW-IPAC2016-TUOAB01
[n]	J. Petter, J. Marriner, and J. McCarthy, “Transverse Beam Dampers for the FNAL  Antiproton Rings”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 791-794. 
[n]	H. Okuno et al., “Design Study of the Injection and Extraction Systems for the RIKEN Superconducting Ring Cyclotron”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7W034, pp. 1075-1077. 
[n]	S. Fujishima et al., “Design Study of Sector Magnet for the RIKEN Superconducting Ring Cyclotron I”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP107G, pp. 2302-2304. 
[n]	M. G. Billing et al., “Dependence of the Coupling of Dipole Motion From Bunch to Bunch Caused by Electron Clouds at CesrTA Due to Variations in Bunch Length and Chromaticity”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4512-4515. doi:10.18429/JACoW-IPAC2017-THPVA035
[n]	C. Xiao, L. Groening, O. K. Kester, and M. T. Maier, “Decoupling Capabilities Study of the Emittance Transfer Section”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO009, pp. 1895-1897. 
[n]	A. Mizuno, H. Dewa, H. Hanaki, T. Taniuchi, and H. Tomizawa, “Effects on Emittance Asymmetry Caused by Asymmetry Fields of Traveling Wave Accelerator Structure”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC16, pp. 273-276. 
[n]	A. Saini, J.-P. Carneiro, D. E. Johnson, J.-F. Ostiguy, N. Solyak, and V. P. Yakovlev, “Layout of Project-X Facility: A Reference Design”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPMA13, pp. 324-326. 
[n]	B. G?Ñlnander et al., “Status of Electron Cooler Design for HESR”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP049, pp. 3473-3475. 
[n]	S. Okumura et al., “Control System for JAERI AVF Cyclotron”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XI-04, pp. 648-651. 
[n]	N. ElKamchi, P. Gauron, and H. Monard, “Interlock System for Machine Protection at ThomX Accelerator”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 386-388. doi:10.18429/JACoW-ICALEPCS2015-MOPGF131
[n]	T. Sen, C. M. Bhat, and J.-F. Ostiguy, “Stability of Flat Bunches in the Recycler Barrier Bucket”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5RFP061, pp. 4679-4681. 
[n]	Y. Kijima et al., “Effect of N2 Gas Exposure on the L-band Superconducting Cavity”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper TUP034, pp. 292-294. 
[n]	Y. Seimiya et al., “Emittance Growth by Misalignments and Jitters in SuperKEKB Injector Linac”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3871-3873. doi:10.18429/JACoW-IPAC2016-THPOR040
[n]	M. J. Barnes et al., “Development of an Eddy Current Septum for LINAC4”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPD002, pp. 1434-1436. 
[n]	D. Stratakis et al., “Time-Dependent Phase-Space Mapping of Space-Charge-Dominated Beams”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE3GRC05, pp. 1928-1930. 
[n]	C. D. Moore, R. Coleman, G. Goderre, and M. J. Yang, “Tevatron Extraction Modelling”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1498-1501. 
[n]	J. P. Edelen, S. Biedron, J. R. Harris, S. V. Milton, and J. W. Lewellen, “A Two Frequency Gun for High Current Thermionic Cathode Electron Injector Systems”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPSM09, pp. 649-651. 
[n]	K. Ohmi, S. Kamada, and H. Fares, “Coherent Thomson Scattering using Beam Echo”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPME013, pp. 1592-1594. 
[n]	S. Sharonov and J. M. Nogiec, “An Embedded Power Supply Controller”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P008, pp. 3464-3466. 
[n]	Y. S. Derbenev et al., “Electron-Ion Collider at CEBAF: New Insights and Conceptual Progress”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT153, pp. 893-895. 
[n]	J.-F. Ostiguy, A. Saini, and N. Solyak, “Numerical Simulations of ProjectX/PXIE RFQ”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB055, pp. 975-977. 
[n]	E. Ezura, K. Akai, H. Hayano, M. Ono, M. Suetake, and T. Takashima, “The Low-Level RF System for TRISTAN Main Ring”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1660-1663. 
[n]	S. Fujishima et al., “Design Study of Sector Magnet for the RIKEN Superconducting Ring Cyclotron 2”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP116G, pp. 2305-2310. 
[n]	K. Hosoyama et al., “Construction and Commissioning of KEKB Superconducting Crab Cavities”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper MO405, pp. XX-XX. 
[n]	O. J. Luiten and M. J. Van der Wiel, “Pancakes, Waterbags, and Cold Atoms: New Recipes for High-Brightness Electron Beams”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper WEOB003, pp. XX-XX. 
[n]	A. Bacci et al., “Advanced Beam Dynamics Experiments at SPARC”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper THOB2, pp. 451-454. 
[n]	M. Kuriki, Y. Kim, and Z. Zhao, “A report from ISBA25, accelerator school in Shanghai, China”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP8619, unpublished. 
[n]	J. R. Haines, M. Futakawa, and W. Wagner, “Megawatt Class Spallation Target Development”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU4GRI02, pp. 794-794. 
[n]	M. T. Maier et al., “ROSE, Measuring the Full 4D Transverse Beam Matrix of Ion Beams”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 98-100. doi:10.18429/JACoW-IPAC2016-MOPMB011
[n]	D. Shu et al., “Mechanical Design of Compact Vertical and Horizontal Linear Nanopositioning Flexure Stages With Centimeter-Level Travel Range for X-Ray Beamline Instrumentation”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4096-4099. doi:10.18429/JACoW-IPAC2017-THPAB154
[n]	B. N. Kirsanov et al., “The Use of a Classical Cyclotron with 28 MeV Proton Energy for the Production of 201TI and 68Ge”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper I-12, pp. 636-637. 
[n]	J. W. Hicks, “The 200 - MeV Electron-Positron Storage Ring Magnet Power Supply”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 493-496. 
[n]	K. R. Chu, S. Kuechler, Y. C. Tsai, and E. Weihreter, “Optimization and Experimental Characterization of a Broadband Circular Waveguide to Coaxial Transition”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP09C, pp. 1826-1828. 
[n]	S. G. Anderson et al., “Commissioning of a High-Brightness Photoinjector for Compton Scattering X-Ray Sources”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMS028, pp. 1242-1244. 
[n]	X. Yin et al., “Comparison of Tracking Simulation with Experiment on the GSI UNILAC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWA019, pp. 1763-1765. 
[n]	B. Campbell, K. C. D. Chan, E. Newman, and R. Valicenti, “APT Cryomodule Assembly Process and Mockup Model”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP130, pp. 971-973. 
[n]	P. Adamson, “Reuse Recycler: High Intensity Proton Stacking at Fermilab”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 463-467. doi:10.18429/JACoW-HB2016-THAM1X01
[n]	T. J. Roberts, “G4beamline Code Development”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC084, pp. 334-336. 
[n]	M. Apollonio and M. A. Rayner, “Optimization of the MICE Muon Beam Line”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE052, pp. 3461-3463. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search