Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. Myneni and M. Hutton, “SRF Technology-Past, Present and Future Options”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP130, pp. 865-867.
[n] V. Talanov and M. Wohlmuther, “Numerical and Experimental Study for the Characterization of the Spallation Target Performance of the Ultracold Neutron Source at the Paul Scherrer Institut”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO085, pp. 3960-3962.
[n] M. Wiseman, C. K. Sinclair, R. Whitney, M. Zarecky, and R. Vetterlein, “High Power Electron Beam Dumps at CEBAF”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P066, pp. 3761-3763.
[n] S. Haghtalab, F. Abbasi, F. Ghasemi, M. Jafarzadeh, and M. Lamehi, “Basic Design of Control System for IPM Linear Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4082-4084. doi:10.18429/JACoW-IPAC2016-THPOW060
[n] P. A. Bong and E. Carrone, “Linac Coherent Light Source Personnel Protection System Architecture”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP107, pp. XX-XX.
[n] M. Inoue, V. Kapin, and A. Noda, “Design Study of a Multiple-Beam RFQ Version of a High-Current Linac Injector for a Neutron Source”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP18C, pp. 725-727.
[n] R. Schmidt, T. Spickermann, and K. Wittenburg, “Radiation Dose for Equipment in the LHC Arcs”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP22H, pp. 2301-2303.
[n] D. F. A. Winters et al., “Laser Cooling taken to the Extreme at the FAIR SIS100”, presented at the COOL2023, Montreux, Switzerland, Oct. 2023, paper TUPPM2R2, unpublished.
[n] S. A. Gavrilov, A. Feschenko, P. I. Reinhardt-Nickoulin, and I. V. Vasilyev, “Analysis of Measurement Errors of INR Linac Ionization Beam Cross Section Monitor”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPF16, pp. 535-538.
[n] G. V. Trubnikov et al., “Status of the NICA Project at JINR”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1003-1005. doi:10.18429/JACoW-IPAC2014-TUPRO005
[n] Y. Li, J. V. Conway, X. Liu, and M. A. Palmer, “Electron Cloud Diagnostic Chambers with Various EC-suppression Coatings”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI088, pp. 3496-3498.
[n] F. J. Decker, R. Pennacchi, R. Stege, and J. Turner, “Characterizing Transverse Beam Jitter in the SLC Linac”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP13H, pp. 457-459.
[n] R. A. Legg et al., “Status of the Wisconsin SRF Gun”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP045, pp. 661-663.
[n] M. Vanwelde, C. Hernalsteens, E. Ramoisiaux, E. Gnacadja, N. Pauly, and R. Tesse, “Conceptual lattice design for vertical fixed field medical accelerators”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 5095-5098. doi:10.18429/JACoW-IPAC2023-THPM093
[n] L. X. Li et al., “Production of intense pulsed highly charged ions beams with high performance superconducting ECR ion source”, presented at the ECRIS'22, Ahmedabad, India, Oct. 2022, paper WEP1PG003, unpublished.
[n] A. L??deke, “SLS Operation Management: Methods and Tools”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS143, pp. 2715-2717.
[n] J.-H. Jang, Y.-S. Cho, H. S. Kim, H.-J. Kwon, and Y. Y. Lee, “Physics Design of the PEFP RCS”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP069, pp. 1448-1450.
[n] T. Weiland, “Design Study for a 500 GeV Linear Collider”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper FR102, pp. 792-796.
[n] L. Faillace et al., “High-power Tests of an Ultra-high Gradient Compact S-band (HGS) Accelerating Structure”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI088, pp. 2902-2904.
[n] Z. Liu, Z. Q. He, S. M. Lidia, D. Liu, and Q. Zhao, “Optimization of Beam Loss Monitor Network for Fault Modes”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1356-1358. doi:10.18429/JACoW-IPAC2015-TUAC3
[n] K. W. Shepard and M. Kedzie, “Low and Medium Velocity Cavity Development for the RIA Driver Linac”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PT018, pp. XX-XX.
[n] K. Papke, U. van Rienen, and F. Gerigk, “HOM Couplers for CERN SPL Cavities”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THP064, pp. 1066-1068.
[n] J. Yang et al., “Femtosecond Photoinjector and Relativistic Electron Microscopy”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC057, pp. 1126-1128.
[n] C.-Y. Tsai, D. Douglas, R. Li, and C. Tennant, “Theoretical Investigation of Coherent Synchrotron Radiation Induced Microbunching Instability in Transport and Recirculation Arcs”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP022, pp. 730-734.
[n] D. H. An et al., “Beam Simulation of SQQ Injection System in KIRAMS-30 Cyclotron”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH080, pp. 2107-2109.
[n] T. J. Shea et al., “Proton Beam Measurement Strategy for the 5 MW European Spallation Source Target”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPC02, pp. 349-352.
[n] A. R. Beck, B. Bru, S. Chel, and Ch. Ricaud, “Six-Dimensional Beam Matching for Axial Injection into a Cyclotron”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper G1-01, pp. 432-434.
[n] A. Andreev, H. Klingbeil, and D. E. M. Lens, “Phase Calibration of Synchrotron RF Signals”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3945-3947. doi:10.18429/JACoW-IPAC2017-THPAB097
[n] F. Lin et al., “Investigation of Residual Vertical Intrinsic Resonances with Dual Partial Siberian Snakes in the AGS”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS011, pp. 3534-3536.
[n] W. Turner, Y.-J. Chen, W. Nexsen, M. Green, G. Miram, and A. Nordquist, “High-Brightness, High-Current-Density Cathode for Induction Linac FELs”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-15, pp. 341-344.
[n] N. Angert et al., “A Heavy Ion Injector for the CERN Linac 1”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper THP0018, pp. 374-376.
[n] K. Artoos et al., “Stabilization and Fine Positioning to the Nanometre Level of the CLIC Main Beam Quadrupoles”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUOCMH02, pp. 1274-1276.
For LaTeX
Use Complete Form
For BibTeX
References
- G. Myneni and M. Hutton, “SRF Technology-Past, Present and Future Options”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP130, pp. 865-867.
- V. Talanov and M. Wohlmuther, “Numerical and Experimental Study for the Characterization of the Spallation Target Performance of the Ultracold Neutron Source at the Paul Scherrer Institut”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO085, pp. 3960-3962.
- M. Wiseman, C. K. Sinclair, R. Whitney, M. Zarecky, and R. Vetterlein, “High Power Electron Beam Dumps at CEBAF”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P066, pp. 3761-3763.
- S. Haghtalab, F. Abbasi, F. Ghasemi, M. Jafarzadeh, and M. Lamehi, “Basic Design of Control System for IPM Linear Accelerator”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4082-4084.
- P. A. Bong and E. Carrone, “Linac Coherent Light Source Personnel Protection System Architecture”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP107, pp. XX-XX.
- M. Inoue, V. Kapin, and A. Noda, “Design Study of a Multiple-Beam RFQ Version of a High-Current Linac Injector for a Neutron Source”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP18C, pp. 725-727.
- R. Schmidt, T. Spickermann, and K. Wittenburg, “Radiation Dose for Equipment in the LHC Arcs”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP22H, pp. 2301-2303.
- D. F. A. Winters et al., “Laser Cooling taken to the Extreme at the FAIR SIS100”, presented at the 14th International Workshop on Beam Cooling and Related Topics (COOL2023), Montreux, Switzerland, Oct. 2023, paper TUPPM2R2, unpublished.
- S. A. Gavrilov, A. Feschenko, P. I. Reinhardt-Nickoulin, and I. V. Vasilyev, “Analysis of Measurement Errors of INR Linac Ionization Beam Cross Section Monitor”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPF16, pp. 535-538.
- G. V. Trubnikov et al., “Status of the NICA Project at JINR”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1003-1005.
- Y. Li, J. V. Conway, X. Liu, and M. A. Palmer, “Electron Cloud Diagnostic Chambers with Various EC-suppression Coatings”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI088, pp. 3496-3498.
- F. J. Decker, R. Pennacchi, R. Stege, and J. Turner, “Characterizing Transverse Beam Jitter in the SLC Linac”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP13H, pp. 457-459.
- R. A. Legg et al., “Status of the Wisconsin SRF Gun”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPP045, pp. 661-663.
- M. Vanwelde, C. Hernalsteens, E. Ramoisiaux, E. Gnacadja, N. Pauly, and R. Tesse, “Conceptual lattice design for vertical fixed field medical accelerators”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM093, pp. 5095-5098.
- L. X. Li et al., “Production of intense pulsed highly charged ions beams with high performance superconducting ECR ion source”, presented at the 25th International Workshop on ECR Ion Sources (ECRIS'22), Ahmedabad, India, Oct. 2022, paper WEP1PG003, unpublished.
- A. L??deke, “SLS Operation Management: Methods and Tools”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS143, pp. 2715-2717.
- J.-H. Jang, Y.-S. Cho, H. S. Kim, H.-J. Kwon, and Y. Y. Lee, “Physics Design of the PEFP RCS”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP069, pp. 1448-1450.
- T. Weiland, “Design Study for a 500 GeV Linear Collider”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper FR102, pp. 792-796.
- L. Faillace et al., “High-power Tests of an Ultra-high Gradient Compact S-band (HGS) Accelerating Structure”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI088, pp. 2902-2904.
- Z. Liu, Z. Q. He, S. M. Lidia, D. Liu, and Q. Zhao, “Optimization of Beam Loss Monitor Network for Fault Modes”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1356-1358.
- K. W. Shepard and M. Kedzie, “Low and Medium Velocity Cavity Development for the RIA Driver Linac”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PT018, pp. XX-XX.
- K. Papke, U. van Rienen, and F. Gerigk, “HOM Couplers for CERN SPL Cavities”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper THP064, pp. 1066-1068.
- J. Yang et al., “Femtosecond Photoinjector and Relativistic Electron Microscopy”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC057, pp. 1126-1128.
- C.-Y. Tsai, D. Douglas, R. Li, and C. Tennant, “Theoretical Investigation of Coherent Synchrotron Radiation Induced Microbunching Instability in Transport and Recirculation Arcs”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THP022, pp. 730-734.
- D. H. An et al., “Beam Simulation of SQQ Injection System in KIRAMS-30 Cyclotron”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH080, pp. 2107-2109.
- T. J. Shea et al., “Proton Beam Measurement Strategy for the 5 MW European Spallation Source Target”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPC02, pp. 349-352.
- A. R. Beck, B. Bru, S. Chel, and Ch. Ricaud, “Six-Dimensional Beam Matching for Axial Injection into a Cyclotron”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper G1-01, pp. 432-434.
- A. Andreev, H. Klingbeil, and D. E. M. Lens, “Phase Calibration of Synchrotron RF Signals”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3945-3947.
- F. Lin et al., “Investigation of Residual Vertical Intrinsic Resonances with Dual Partial Siberian Snakes in the AGS”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAS011, pp. 3534-3536.
- W. Turner, Y.-J. Chen, W. Nexsen, M. Green, G. Miram, and A. Nordquist, “High-Brightness, High-Current-Density Cathode for Induction Linac FELs”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-15, pp. 341-344.
- N. Angert et al., “A Heavy Ion Injector for the CERN Linac 1”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper THP0018, pp. 374-376.
- K. Artoos et al., “Stabilization and Fine Positioning to the Nanometre Level of the CLIC Main Beam Quadrupoles”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUOCMH02, pp. 1274-1276.
Back to search