Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] W. T. Weng, “The Lattice Design and Tolerance Analysis of the CBA Transport Line”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2463-2466.
[n] U. Wienands et al., “The Vacuum System for the PEP II High Energy Ring Straight Sections”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAA22, pp. 2129-2131.
[n] W. H. Li, I. V. Bazarov, C. M. Gulliford, and J. M. Maxson, “Novel Photocathode Geometry Optimization: Field Enhancing Photoemission Tips”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1605-1608. doi:10.18429/JACoW-IPAC2018-TUPML029
[n] I. Will, “Drive Lasers for Photoinjectors”, in Proc. ERL'07, Daresbury, UK, May 2007, paper 13, pp. XX-XX.
[n] M. Jensen et al., “Operational Experience of Diamond`s Superconducting Cavities”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO019, pp. 228-230.
[n] J. G. De Villiers et al., “Numerical Orbit Tracking in 3D Through the Injector Cyclotron for Heavy Ions at iThemba LABS”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 71-74. doi:10.18429/JACoW-Cyclotrons2016-MOP10
[n] S. Ohnuma and R. L. Gluckstern, “Width of Nonlinear Difference Resonances”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2261-2264.
[n] J. M. Brennan et al., “Design of Ferrite Loaded High Voltage Barrier Cavity”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP22G, pp. 1829-1831.
[n] K. C. D. Chan et al., “Progress of APT Superconducting Linac Engineering Development”, presented at the LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4097, unpublished.
[n] J. Brossard et al., “Low Energy Beam Measurements Using PHIL Accelerator at LAL, Comparison with PARMELA Simulations”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP210, pp. 1885-1887.
[n] C. A. Martins, G. G?Âransson, M. Kalafatic, and M. Collins, “Pulsed High Power Klystron Modulators for ESS Linac Based on the Stacked Multi-Level Topology”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 359-362. doi:10.18429/JACoW-LINAC2016-TU2A02
[n] C. Yao, Y.-C. Chae, S. H. Kim, L. H. Morrison, and H. Shang, “Development of a Horizontal Drive Stripline for the APS Transverse Feedback System”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper TUPG046, pp. 228-230.
[n] E. F. Parker, “Recent Measurement of the ZGS Injector Beam Characteristics”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper C03, pp. 63-66.
[n] J. Dietrich et al., “Beam Diagnostics at COSY-Juelich”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1088-1091.
[n] M. Alkadi, C. Bruni, M. El Khaldi, M. Jacquet, and H. Monard, “Electromagnetic and Beam Dynamics Studies of the ThomX LINAC”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2721-2724. doi:10.18429/JACoW-IPAC2021-WEPAB054
[n] S. A. Antipov, A. Didenko, V. A. Lebedev, and A. Valishev, “Stripline Kicker for Integrable Optics Test Accelerator”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3390-3392. doi:10.18429/JACoW-IPAC2015-WEPTY051
[n] C. Christou et al., “Commissioning of the Hybrid Superconducting/Normal Conducting RF System in the Diamond Storage Ring”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4042-4045. doi:10.18429/JACoW-IPAC2018-THPMF007
[n] V. Serriere et al., “352.2 MHz HOM Damped Normal Conducting ESRF Cavity: Design and Fabrication”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC004, pp. 68-70.
[n] A. Y. Molodozhentsev, A. Ando, T. Koseki, M. J. Shirakata, J. Takano, and M. Tomizawa, “Study of the Beam Dynamics for the 'Fast Extraction' Operating Scenario of the J-PARC Main Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD009, pp. 1937-1939.
[n] R. A. Marsh, S. G. Anderson, D. J. Gibson, J. Hall, and B. Rusnak, “Fluorescence-Based Imaging Diagnostic for High Average Power Deuteron Beam”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2777-2779. doi:10.18429/JACoW-IPAC2019-WEPGW120
[n] P. Duval, P. K. Bartkiewicz, S. W. Herb, S. Weisse, and H. Wu, “TINE Release 4 in Operation”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper MOX01, pp. XX-XX.
[n] S. E. Karnaev, E. V. Goman, O. A. Plotnikova, and E. A. Simonov, “The Database of the VEPP-4 Accelerating Facility Parameters”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper MOW04, pp. 40-42.
[n] F. Furuta et al., “Vertical Electropolishing Studies at Cornell with KEK and Marui”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2295-2297. doi:10.18429/JACoW-IPAC2016-WEPMR016
[n] U. Krause et al., “Integration of Renovated Networking Middleware into a Running Control System Environment”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper MOW03, pp. 37-39.
For LaTeX
Use Complete Form
For BibTeX
References
- W. T. Weng, “The Lattice Design and Tolerance Analysis of the CBA Transport Line”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2463-2466.
- U. Wienands et al., “The Vacuum System for the PEP II High Energy Ring Straight Sections”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAA22, pp. 2129-2131.
- W. H. Li, I. V. Bazarov, C. M. Gulliford, and J. M. Maxson, “Novel Photocathode Geometry Optimization: Field Enhancing Photoemission Tips”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1605-1608.
- I. Will, “Drive Lasers for Photoinjectors”, in Proc. 41st Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'07), Daresbury, UK, May 2007, paper 13, pp. XX-XX.
- M. Jensen et al., “Operational Experience of Diamond`s Superconducting Cavities”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO019, pp. 228-230.
- J. G. De Villiers et al., “Numerical Orbit Tracking in 3D Through the Injector Cyclotron for Heavy Ions at iThemba LABS”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 71-74.
- S. Ohnuma and R. L. Gluckstern, “Width of Nonlinear Difference Resonances”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2261-2264.
- J. M. Brennan et al., “Design of Ferrite Loaded High Voltage Barrier Cavity”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP22G, pp. 1829-1831.
- K. C. D. Chan et al., “Progress of APT Superconducting Linac Engineering Development”, presented at the 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4097, unpublished.
- J. Brossard et al., “Low Energy Beam Measurements Using PHIL Accelerator at LAL, Comparison with PARMELA Simulations”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP210, pp. 1885-1887.
- C. A. Martins, G. G?Âransson, M. Kalafatic, and M. Collins, “Pulsed High Power Klystron Modulators for ESS Linac Based on the Stacked Multi-Level Topology”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 359-362.
- C. Yao, Y.-C. Chae, S. H. Kim, L. H. Morrison, and H. Shang, “Development of a Horizontal Drive Stripline for the APS Transverse Feedback System”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper TUPG046, pp. 228-230.
- E. F. Parker, “Recent Measurement of the ZGS Injector Beam Characteristics”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper C03, pp. 63-66.
- J. Dietrich et al., “Beam Diagnostics at COSY-Juelich”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1088-1091.
- M. Alkadi, C. Bruni, M. El Khaldi, M. Jacquet, and H. Monard, “Electromagnetic and Beam Dynamics Studies of the ThomX LINAC”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2721-2724.
- S. A. Antipov, A. Didenko, V. A. Lebedev, and A. Valishev, “Stripline Kicker for Integrable Optics Test Accelerator”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3390-3392.
- C. Christou et al., “Commissioning of the Hybrid Superconducting/Normal Conducting RF System in the Diamond Storage Ring”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4042-4045.
- V. Serriere et al., “352.2 MHz HOM Damped Normal Conducting ESRF Cavity: Design and Fabrication”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC004, pp. 68-70.
- A. Y. Molodozhentsev, A. Ando, T. Koseki, M. J. Shirakata, J. Takano, and M. Tomizawa, “Study of the Beam Dynamics for the 'Fast Extraction' Operating Scenario of the J-PARC Main Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPD009, pp. 1937-1939.
- R. A. Marsh, S. G. Anderson, D. J. Gibson, J. Hall, and B. Rusnak, “Fluorescence-Based Imaging Diagnostic for High Average Power Deuteron Beam”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2777-2779.
- P. Duval, P. K. Bartkiewicz, S. W. Herb, S. Weisse, and H. Wu, “TINE Release 4 in Operation”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper MOX01, pp. XX-XX.
- S. E. Karnaev, E. V. Goman, O. A. Plotnikova, and E. A. Simonov, “The Database of the VEPP-4 Accelerating Facility Parameters”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper MOW04, pp. 40-42.
- F. Furuta et al., “Vertical Electropolishing Studies at Cornell with KEK and Marui”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2295-2297.
- U. Krause et al., “Integration of Renovated Networking Middleware into a Running Control System Environment”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper MOW03, pp. 37-39.
Back to search