Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] H. Hahn and A. Ratti, “The Coupling Impedance of the RHIC Injection Kicker System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7V028, pp. 1706-1708.
[n] K. Seiya et al., “RF system upgrade for 1.3 MW operation of J-PARC main ring”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1017-1020. doi:10.18429/JACoW-IPAC2024-TUPC10
[n] R. M??ller, J. Feikes, K. Holldack, and P. Kuske, “Orbit Stability at BESSY”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAE035, pp. 2366-2368.
[n] Z. Mart?¡, G. Benedetti, M. Carl?á, U. Iriso, and L. Torino, “Full Coupling Studies at ALBA”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1667-1670. doi:10.18429/JACoW-IPAC2022-WEOZSP4
[n] B. Mukherjee, “A RADIOLOGICAL SAFETY AND HEALTH PHYSICS DATABASE FOR CYCLOTRONS ACCELERATING PROTONS AND DEUTERONS UP TO 250 MEV”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 19P22, pp. XX-XX.
[n] R. A. Rimmer et al., “The JLAB Ampere-class Cryomodule Conceptual Design”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH182, pp. 490-492.
[n] L. Calabretta et al., “Towards the Acceleration of the First Beam by the INFN Superconducting Cyclotron”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 551-554.
[n] T. Birke et al., “Use Case - Configuration Management with a generic RDB Data-Model”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_079.
[n] T. Kosuge, “STARS .NET Interface for Windows CE”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper MOW01, pp. 31-33.
[n] E. N. Zaplatin, C. H. Boulware, T. L. Grimm, A. Rogacki, A. Kanareykin, and V. P. Yakovlev, “Manufacturing and First Test Results of Euclid SRF Conical Half-wave Resonator”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2841-2844. doi:10.18429/JACoW-IPAC2015-WEPMA037
[n] H. Maesaka et al., “Precise RF Control System of the SCSS Test Accelerator”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC143, pp. 1404-1406.
[n] P. Attal, E. Baron, C. Bieth, M. P. Bourgarel, R. Gayraud, and C. Pagani, “The GANIL Injector Design”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper A-16, pp. 1944-1947.
[n] P. H. Gao et al., “Redundancy Analysis of Solid-state Ampliifers for CiADS Accelerator”, in Proc. SAP'17, Jishou, China, Aug. 2017, pp. 169-171. doi:10.18429/JACoW-SAP2017-TUPH30
[n] K. Hasegawa et al., “Status and Upgrade Plan of the MR Ring RF Systems in J-PARC”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2031-2033. doi:10.18429/JACoW-IPAC2022-WEPOTK004
[n] V. Pinty, N. Jaouen, F. Marteau, H. Popescu, and P. Prout, “MAGSTAT V3: An In-Vacuum Variable-Gap Quadrupole with Rotary Permanent Magnets”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 412-414. doi:10.18429/JACoW-MEDSI2018-THPH37
[n] S. Aronson, F. Caspers, H. Haseroth, J. Knott, and W. Willis, “Model Measurements for the Switched Power Linac”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 121-124.
[n] O. Dolinskyy, Y. El Hayek, D. Ondreka, and P. Spiller, “Enhancing beam intensity in SIS18 by a two-plane multi-turn injection approach”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS141, unpublished.
[n] R. Wehrle, S. Kim, J. Moenich, and R. Nielsen, “Vacuum System for the Synchrotron X-Ray Source at Argonne”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1669-1672.
[n] W. Roberts and B. Aikens, “A 256 Channel Digital Filter for a Data Acquisition System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1455-1458.
[n] K. Umemori, T. Furuya, H. Sakai, M. Sawamura, K. Shinoe, and T. Takahashi, “Status of 9-cell Superconducting Cavity Development for ERL Project in Japan”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO055, pp. 355-358.
[n] A. E. Vlieks, S. G. Anderson, V. A. Dolgashev, F. V. Hartemann, R. A. Marsh, and S. G. Tantawi, “X-band RF Gun Development”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA063, pp. 3816-3818.
[n] P.-E. Bernaudin et al., “Design of the Low-beta, Quarter-wave Resonator and its Cryomodule for the SPIRAL 2 Project”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT054, pp. 1276-1278.
[n] S. Sarkar, P. Bennett, Y. Miles, M. Mouat, A. Purvis, and W. Roberts, “Vax Q-Bus to CAMAC Systems Crate Interface for Long Camac Branches”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1690-1693.
[n] M. E. Bevins et al., “Mechanical and Thermal Design of the CEBAF Hall A Beam Calorimeter”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT070, pp. 3819-3821.
[n] J. R. Delayen, G. K. Davis, M. Drury, and E. Feldl, “Development and Testing of a Prototype Tuner for the CEBAF Upgrade Cryomodule”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH156, pp. 1149-1151.
[n] A. D. Cahill, M. Dal Forno, and V. A. Dolgashev, “Automated Design for Standing Wave Electron Photoguns: TOPGUN RF Design”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3999-4001. doi:10.18429/JACoW-IPAC2016-THPOW028
[n] K. Wu, B. Du, S. Ma, S. Zhang, J. Pang, and S. Dong, “Development of RF reference distribution system for Hefei Advanced Light Facility”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3375-3377. doi:10.18429/JACoW-IPAC2024-THPG48
[n] P. Krejcik, M. L. Campell, J. M. D, H. Loos, and K. Luchini, “Performance of the New Fast Wire Scanner at the LCLS”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 547-549. doi:10.18429/JACoW-IBIC2015-TUPB082
[n] W. R. Baker, W. L. Gagnon, and F. Voelker, “Flat-Topping Magnet Current for the Berkeley Electron Ring in a Static Magnetic Field”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 1047-1050.
[n] A. Ratti et al., “Prototype Models for the SNS RFQ”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4084, pp. 600-602.
[n] J. Chen et al., “Emittance Measurement by Using Duo Image Pattern of Cherenkov Radiation”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB076, pp. 2580-2582.
[n] D. C. Fiander, D. Grier, K-D. Metzmacher, and P. Pearce, “A Modulated Fast Bump for the CPS Continuous Transfer”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1340-1343.
[n] M. Champion et al., “Overview of the Spallation Neutron Source Linac Low-Level RF Control System”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT057, pp. 3396-3398.
[n] J. Kirchgessner et al., “Fabrication of Superconducting Niobium Radio Frequency Structures”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3351-3354.
[n] R. Brinkmann, Y. Derbenev, M. Gentner, D. Husmann, and C. Steier, “Electron Cooling Possibilities for HERA”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP54C, pp. 344-346.
[n] F. Ravotti et al., “The Beam Profile Monitoring System for the CERN IRRAD Proton Facility”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 825-828. doi:10.18429/JACoW-IBIC2016-WEPG75
[n] J. Corlett et al., “A Recirculating Linac-Based Facility for Ultrafast X-Ray Science”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOAC003, pp. 186-188.
[n] M. Heilmann et al., “High Power RF Coupler for the CW-Linac Demonstrator at GSI”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 990-992. doi:10.18429/JACoW-IPAC2017-MOPVA054
[n] K. Furukawa, M. Satoh, I. Mejuev, and K. Nakao, “A Java-based EPICS Archive Viewer with SOAP Interface for Data Retrieval”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP707, pp. XX-XX.
[n] G. Benedetti, U. Iriso, Z. Mart?¡, and F. P?®rez, “First Study for an Upgrade of the ALBA Lattice”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1544-1546. doi:10.18429/JACoW-IPAC2019-TUPGW061
[n] G. Moreno et al., “H11(0) end cells for a 750 MHz IH structure”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1699-1702. doi:10.18429/JACoW-IPAC2023-TUPA171
[n] X. D. Yu et al., “Tuning of a Four-vane RFQ for Xi'an 200 MeV Proton Application Facility”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 838-840. doi:10.18429/JACoW-LINAC2018-THPO064
[n] D. Ehst, N. V. Mokhov, R. J. Noble, and A. Van Ginneken, “Target Options and Yields for a Muon Collider Source”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4W023, pp. 393-395.
[n] Z. Fang et al., “Present Status of RF System for Medical Proton Synchrotron”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT052, pp. 3185-3187.
[n] D. Van Winkle, V. A. Dolgashev, J. D. Fox, and S. G. Tantawi, “Investigations into Cost Reductions of X-band Instrumentation”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP015, pp. 1559-1561.
[n] R. Müller et al., “Experimental Data Taking and Management: The Upgrade Process at BESSY II and HZB”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 84-89. doi:10.18429/JACoW-ICALEPCS2023-MO2AO04
[n] F. Severino et al., “Embedded System Architecture and Capabilities of the RHIC LLRF Platform”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP296, pp. 672-674.
[n] K. P. Mondal, R. Begay, J. Biswas, L. Cultrera, M. Gaowei, and J. Walsh, “An upgrade for the CeC cathode deposition system: co-deposition of K₂CsSb and CsTe/GaAs for CeC use”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2060-2063. doi:10.18429/JACoW-IPAC2024-WEPC43
[n] D. Shuman, A. Faltens, M. Kireeff Covo, G. Ritchie, and P. A. Seidl, “A Compact High Gradient Pulsed Magnetic Quadrupole”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT068, pp. 3771-3773.
[n] R. De Prisco, A. R. Karlsson, M. Eshraqi, Y. I. Levinsen, and R. Miyamoto, “Integration of Interfaces and Stabilization System in the Design of a Drift Tube Linac”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 294-297. doi:10.18429/JACoW-LINAC2016-MOPLR070
[n] H. Andrews et al., “A laser heated thermionic cathode”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2090-2092. doi:10.18429/JACoW-IPAC2024-WEPC55
[n] D. Huang, H. X. Deng, C. Feng, D. Gu, Q. Gu, and Z. T. Zhao, “Applying Transverse Gradient Undulators to Suppression of Microbunching Instability”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 380-383. doi:10.18429/JACoW-LINAC2016-TUOP01
[n] Z. Fang et al., “LLRF Controller Upgrade for the J-PARC 400 MeV LINAC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA046, pp. 1434-1436.
[n] X. Lu et al., “Development progress of high-level applications for the HEPS”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4259-4261. doi:10.18429/JACoW-IPAC2023-THPA125
[n] M. Mayerhofer et al., “Laser powder bed fusion for x-band RF cavities: A preliminary study”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPB052, unpublished.
For LaTeX
Use Complete Form
For BibTeX
References
- H. Hahn and A. Ratti, “The Coupling Impedance of the RHIC Injection Kicker System”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7V028, pp. 1706-1708.
- K. Seiya et al., “RF system upgrade for 1.3 MW operation of J-PARC main ring”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPC10, pp. 1017-1020.
- R. M??ller, J. Feikes, K. Holldack, and P. Kuske, “Orbit Stability at BESSY”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAE035, pp. 2366-2368.
- Z. Mart?¡, G. Benedetti, M. Carl?á, U. Iriso, and L. Torino, “Full Coupling Studies at ALBA”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1667-1670.
- B. Mukherjee, “A RADIOLOGICAL SAFETY AND HEALTH PHYSICS DATABASE FOR CYCLOTRONS ACCELERATING PROTONS AND DEUTERONS UP TO 250 MEV”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 19P22, pp. XX-XX.
- R. A. Rimmer et al., “The JLAB Ampere-class Cryomodule Conceptual Design”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH182, pp. 490-492.
- L. Calabretta et al., “Towards the Acceleration of the First Beam by the INFN Superconducting Cyclotron”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 551-554.
- T. Birke et al., “Use Case - Configuration Management with a generic RDB Data-Model”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P1_079.
- T. Kosuge, “STARS .NET Interface for Windows CE”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper MOW01, pp. 31-33.
- E. N. Zaplatin, C. H. Boulware, T. L. Grimm, A. Rogacki, A. Kanareykin, and V. P. Yakovlev, “Manufacturing and First Test Results of Euclid SRF Conical Half-wave Resonator”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2841-2844.
- H. Maesaka et al., “Precise RF Control System of the SCSS Test Accelerator”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC143, pp. 1404-1406.
- P. Attal, E. Baron, C. Bieth, M. P. Bourgarel, R. Gayraud, and C. Pagani, “The GANIL Injector Design”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper A-16, pp. 1944-1947.
- P. H. Gao et al., “Redundancy Analysis of Solid-state Ampliifers for CiADS Accelerator”, in Proc. 13th Symposium on Accelerator Physics (SAP'17), Jishou, China, Aug. 2017, pp. 169-171.
- K. Hasegawa et al., “Status and Upgrade Plan of the MR Ring RF Systems in J-PARC”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2031-2033.
- V. Pinty, N. Jaouen, F. Marteau, H. Popescu, and P. Prout, “MAGSTAT V3: An In-Vacuum Variable-Gap Quadrupole with Rotary Permanent Magnets”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 412-414.
- S. Aronson, F. Caspers, H. Haseroth, J. Knott, and W. Willis, “Model Measurements for the Switched Power Linac”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 121-124.
- O. Dolinskyy, Y. El Hayek, D. Ondreka, and P. Spiller, “Enhancing beam intensity in SIS18 by a two-plane multi-turn injection approach”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS141, this conference.
- R. Wehrle, S. Kim, J. Moenich, and R. Nielsen, “Vacuum System for the Synchrotron X-Ray Source at Argonne”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1669-1672.
- W. Roberts and B. Aikens, “A 256 Channel Digital Filter for a Data Acquisition System”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1455-1458.
- K. Umemori, T. Furuya, H. Sakai, M. Sawamura, K. Shinoe, and T. Takahashi, “Status of 9-cell Superconducting Cavity Development for ERL Project in Japan”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO055, pp. 355-358.
- A. E. Vlieks, S. G. Anderson, V. A. Dolgashev, F. V. Hartemann, R. A. Marsh, and S. G. Tantawi, “X-band RF Gun Development”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEA063, pp. 3816-3818.
- P.-E. Bernaudin et al., “Design of the Low-beta, Quarter-wave Resonator and its Cryomodule for the SPIRAL 2 Project”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT054, pp. 1276-1278.
- S. Sarkar, P. Bennett, Y. Miles, M. Mouat, A. Purvis, and W. Roberts, “Vax Q-Bus to CAMAC Systems Crate Interface for Long Camac Branches”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1690-1693.
- M. E. Bevins et al., “Mechanical and Thermal Design of the CEBAF Hall A Beam Calorimeter”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT070, pp. 3819-3821.
- J. R. Delayen, G. K. Davis, M. Drury, and E. Feldl, “Development and Testing of a Prototype Tuner for the CEBAF Upgrade Cryomodule”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH156, pp. 1149-1151.
- A. D. Cahill, M. Dal Forno, and V. A. Dolgashev, “Automated Design for Standing Wave Electron Photoguns: TOPGUN RF Design”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3999-4001.
- K. Wu, B. Du, S. Ma, S. Zhang, J. Pang, and S. Dong, “Development of RF reference distribution system for Hefei Advanced Light Facility”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG48, pp. 3375-3377.
- P. Krejcik, M. L. Campell, J. M. D, H. Loos, and K. Luchini, “Performance of the New Fast Wire Scanner at the LCLS”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 547-549.
- W. R. Baker, W. L. Gagnon, and F. Voelker, “Flat-Topping Magnet Current for the Berkeley Electron Ring in a Static Magnetic Field”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 1047-1050.
- A. Ratti et al., “Prototype Models for the SNS RFQ”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4084, pp. 600-602.
- J. Chen et al., “Emittance Measurement by Using Duo Image Pattern of Cherenkov Radiation”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB076, pp. 2580-2582.
- D. C. Fiander, D. Grier, K-D. Metzmacher, and P. Pearce, “A Modulated Fast Bump for the CPS Continuous Transfer”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1340-1343.
- M. Champion et al., “Overview of the Spallation Neutron Source Linac Low-Level RF Control System”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT057, pp. 3396-3398.
- J. Kirchgessner et al., “Fabrication of Superconducting Niobium Radio Frequency Structures”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3351-3354.
- R. Brinkmann, Y. Derbenev, M. Gentner, D. Husmann, and C. Steier, “Electron Cooling Possibilities for HERA”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP54C, pp. 344-346.
- F. Ravotti et al., “The Beam Profile Monitoring System for the CERN IRRAD Proton Facility”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 825-828.
- J. Corlett et al., “A Recirculating Linac-Based Facility for Ultrafast X-Ray Science”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TOAC003, pp. 186-188.
- M. Heilmann et al., “High Power RF Coupler for the CW-Linac Demonstrator at GSI”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 990-992.
- K. Furukawa, M. Satoh, I. Mejuev, and K. Nakao, “A Java-based EPICS Archive Viewer with SOAP Interface for Data Retrieval”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP707, pp. XX-XX.
- G. Benedetti, U. Iriso, Z. Mart?¡, and F. P?®rez, “First Study for an Upgrade of the ALBA Lattice”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1544-1546.
- G. Moreno et al., “H11(0) end cells for a 750 MHz IH structure”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA171, pp. 1699-1702.
- X. D. Yu et al., “Tuning of a Four-vane RFQ for Xi'an 200 MeV Proton Application Facility”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 838-840.
- D. Ehst, N. V. Mokhov, R. J. Noble, and A. Van Ginneken, “Target Options and Yields for a Muon Collider Source”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4W023, pp. 393-395.
- Z. Fang et al., “Present Status of RF System for Medical Proton Synchrotron”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT052, pp. 3185-3187.
- D. Van Winkle, V. A. Dolgashev, J. D. Fox, and S. G. Tantawi, “Investigations into Cost Reductions of X-band Instrumentation”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP015, pp. 1559-1561.
- R. Müller et al., “Experimental Data Taking and Management: The Upgrade Process at BESSY II and HZB”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper MO2AO04, pp. 84-89.
- F. Severino et al., “Embedded System Architecture and Capabilities of the RHIC LLRF Platform”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP296, pp. 672-674.
- K. P. Mondal, R. Begay, J. Biswas, L. Cultrera, M. Gaowei, and J. Walsh, “An upgrade for the CeC cathode deposition system: co-deposition of K₂CsSb and CsTe/GaAs for CeC use”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC43, pp. 2060-2063.
- D. Shuman, A. Faltens, M. Kireeff Covo, G. Ritchie, and P. A. Seidl, “A Compact High Gradient Pulsed Magnetic Quadrupole”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT068, pp. 3771-3773.
- R. De Prisco, A. R. Karlsson, M. Eshraqi, Y. I. Levinsen, and R. Miyamoto, “Integration of Interfaces and Stabilization System in the Design of a Drift Tube Linac”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 294-297.
- H. Andrews et al., “A laser heated thermionic cathode”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC55, pp. 2090-2092.
- D. Huang, H. X. Deng, C. Feng, D. Gu, Q. Gu, and Z. T. Zhao, “Applying Transverse Gradient Undulators to Suppression of Microbunching Instability”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 380-383.
- Z. Fang et al., “LLRF Controller Upgrade for the J-PARC 400 MeV LINAC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEA046, pp. 1434-1436.
- X. Lu et al., “Development progress of high-level applications for the HEPS”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA125, pp. 4259-4261.
- M. Mayerhofer et al., “Laser powder bed fusion for x-band RF cavities: A preliminary study”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPB052, this conference.
Back to search