Favourites
For Word
[n] R. Racz et al., “Application of an ECR Ion Source for Ionic Functionalization of Implant Materials on the Nanoscale”, in Proc. ECRIS'14, Nizhny Novgorod, Russia, Aug. 2014, paper THOMMH02, pp. 135-139.
[n] J. Delayen and L. Harwood, “Determination of Low Level RF Control Requirements for Superconducting Cavities from Microphonics Measurements”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB081, pp. 992-994.
[n] S. Zander, O. Boldt, F. Frommberger, W. Hillert, and O. Preisner, “Emittance Variation Dependence on Resonance Extraction Parameters at ELSA”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC073, pp. 1168-1170.
[n] J. D. Fuerst, M. Kedzie, K. W. Shepard, Z. A. Conway, and M. Kelly, “Superconducting beta=0.15 Quarter-Wave Cavity for RIA”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP05, pp. 605-607.
[n] D. Krischel, J. Boeer, H. Fechteler, and F. Sommer, “Industrial Fabrication of the Superconducting HERA Quadrupole coil”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1208-1211.
[n] N. Munemoto et al., “Laser Ablation Ion Source for the KEK Digital Accelerator”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 598-600. doi:10.18429/JACoW-IPAC2014-MOPRI010
[n] M. Wenskat, D. Reschke, J. Schaffran, and A. L. Prudnikava, “Nitrogen Infusion R&D on Single Cell Cavities at DESY”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 759-761. doi:10.18429/JACoW-SRF2017-THPB007
[n] C. Crouzel, D. Comar, C. Kellershohn, R. Knipper, C. Le Poec, and C. Sejourne, “Installation of a Compact Variable Energy Cyclotron in a Hospital and Preliminary Results Obtained”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper F-08, pp. 440-443.
[n] R. Monroy-Villa et al., “Design and Fabrication of a Quadrupole-Resonator for Sample R&D”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 838-841. doi:10.18429/JACoW-SRF2019-THP004
[n] R. T. Westervelt, W. B. Klein, and G. Luger, “Framework for a General Purpose, Intelligent Control System for Particle Accelerators”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAE08, pp. 2175-2177.
[n] R. J. Anderson and M. Keelan, “ISIS Injector 2 MW Pulsed RF System Power Supply Upgrade”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD077, pp. 3695-3697.
[n] D. C. Plostinar, R. Enparantza, and M. Larrañaga, “Modelling of the FETS MEBT Line using GPT”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC039, pp. 2094-2096.
[n] T. Y. T. Kuo, J. Conti, J. S. Laughlin, R. Lee, and M. Shufer, “The Use of Digital Techniques for Automatic RF Control of the CS-15 Compact Clyclotron”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1076-1079.
[n] J. F. Schmidt, O. Boldt, F. Frommberger, W. Hillert, and J.-P. Thiry, “Optimizing Polarization with an Improved Integer Resonance Correction Scheme at ELSA”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1108-1110. doi:10.18429/JACoW-IPAC2014-TUPRO039
[n] B. K. Stillwell, J. H. Grimmer, D. P. Pasholk, E. Trakhtenberg, and M. B. Patil, “New Concepts for Revolver Undulator Designs”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP080, pp. 750-752.
[n] O. Boldt, A. Dieckmann, F. Frommberger, and W. Hillert, “Spinor Based Calculation of Depolarizing Effects in Circular Lepton Accelerators”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC052, pp. 2130-2132.
[n] W. Hillert, A. Balling, O. Boldt, A. Dieckmann, and F. Frommberger, “Crossing of Depolarizing Resonances in Circular Electron Accelerators”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC053, pp. 2133-2135.
[n] M. Marchetto et al., “The ARIEL Radioactive Ion Beam Transport System”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 891-893. doi:10.18429/JACoW-LINAC2016-THPLR023
[n] A. S. Dhavale and K. C. Mittal, “Study of Multipacting in a Coaxial Coupler”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC012, pp. 2917-2919.
[n] A. Devred, M. Durante, C. Gourdin, M. Peyrot, J.-M. Rifflet, and P. V?®drine, “Mechanical Design of a Nb3Sn Quadrupole Magnet”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP5B01, pp. 2136-2138.
[n] H. Hassanzadegan et al., “Design and Implementation of a Pulsed Digital LLRF System for the RAL Front End Test Stand”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA055, pp. 1458-1460.
[n] O. Boldt, A. Dieckmann, F. Frommberger, W. Hillert, and J. F. Schmidt, “How to Achieve Longitudinally Polarized Electrons using Integer Spin Tune Resonances”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC067, pp. 1326-1328.
[n] J. F. Schmidt, O. Boldt, F. Frommberger, and W. Hillert, “Simulating Spin Dynamics and Depolarization using POLE”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWO005, pp. 891-893.
For LaTeX
Use Complete Form
For BibTeX
References
- R. Racz et al., “Application of an ECR Ion Source for Ionic Functionalization of Implant Materials on the Nanoscale”, in Proc. 21st Int. Workshop on ECR Ion Sources (ECRIS'14), Nizhny Novgorod, Russia, Aug. 2014, paper THOMMH02, pp. 135-139.
- J. Delayen and L. Harwood, “Determination of Low Level RF Control Requirements for Superconducting Cavities from Microphonics Measurements”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB081, pp. 992-994.
- S. Zander, O. Boldt, F. Frommberger, W. Hillert, and O. Preisner, “Emittance Variation Dependence on Resonance Extraction Parameters at ELSA”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC073, pp. 1168-1170.
- J. D. Fuerst, M. Kedzie, K. W. Shepard, Z. A. Conway, and M. Kelly, “Superconducting beta=0.15 Quarter-Wave Cavity for RIA”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper THP05, pp. 605-607.
- D. Krischel, J. Boeer, H. Fechteler, and F. Sommer, “Industrial Fabrication of the Superconducting HERA Quadrupole coil”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1208-1211.
- N. Munemoto et al., “Laser Ablation Ion Source for the KEK Digital Accelerator”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 598-600.
- M. Wenskat, D. Reschke, J. Schaffran, and A. L. Prudnikava, “Nitrogen Infusion R&D on Single Cell Cavities at DESY”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 759-761.
- C. Crouzel, D. Comar, C. Kellershohn, R. Knipper, C. Le Poec, and C. Sejourne, “Installation of a Compact Variable Energy Cyclotron in a Hospital and Preliminary Results Obtained”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper F-08, pp. 440-443.
- R. Monroy-Villa et al., “Design and Fabrication of a Quadrupole-Resonator for Sample R&D”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 838-841.
- R. T. Westervelt, W. B. Klein, and G. Luger, “Framework for a General Purpose, Intelligent Control System for Particle Accelerators”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAE08, pp. 2175-2177.
- R. J. Anderson and M. Keelan, “ISIS Injector 2 MW Pulsed RF System Power Supply Upgrade”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD077, pp. 3695-3697.
- D. C. Plostinar, R. Enparantza, and M. Larrañaga, “Modelling of the FETS MEBT Line using GPT”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC039, pp. 2094-2096.
- T. Y. T. Kuo, J. Conti, J. S. Laughlin, R. Lee, and M. Shufer, “The Use of Digital Techniques for Automatic RF Control of the CS-15 Compact Clyclotron”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1076-1079.
- J. F. Schmidt, O. Boldt, F. Frommberger, W. Hillert, and J.-P. Thiry, “Optimizing Polarization with an Improved Integer Resonance Correction Scheme at ELSA”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1108-1110.
- B. K. Stillwell, J. H. Grimmer, D. P. Pasholk, E. Trakhtenberg, and M. B. Patil, “New Concepts for Revolver Undulator Designs”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPP080, pp. 750-752.
- O. Boldt, A. Dieckmann, F. Frommberger, and W. Hillert, “Spinor Based Calculation of Depolarizing Effects in Circular Lepton Accelerators”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC052, pp. 2130-2132.
- W. Hillert, A. Balling, O. Boldt, A. Dieckmann, and F. Frommberger, “Crossing of Depolarizing Resonances in Circular Electron Accelerators”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC053, pp. 2133-2135.
- M. Marchetto et al., “The ARIEL Radioactive Ion Beam Transport System”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 891-893.
- A. S. Dhavale and K. C. Mittal, “Study of Multipacting in a Coaxial Coupler”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEC012, pp. 2917-2919.
- A. Devred, M. Durante, C. Gourdin, M. Peyrot, J.-M. Rifflet, and P. V?®drine, “Mechanical Design of a Nb3Sn Quadrupole Magnet”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP5B01, pp. 2136-2138.
- H. Hassanzadegan et al., “Design and Implementation of a Pulsed Digital LLRF System for the RAL Front End Test Stand”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEA055, pp. 1458-1460.
- O. Boldt, A. Dieckmann, F. Frommberger, W. Hillert, and J. F. Schmidt, “How to Achieve Longitudinally Polarized Electrons using Integer Spin Tune Resonances”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPC067, pp. 1326-1328.
- J. F. Schmidt, O. Boldt, F. Frommberger, and W. Hillert, “Simulating Spin Dynamics and Depolarization using POLE”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWO005, pp. 891-893.
Back to search