JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	R. D. Porter et al., “Next Generation Nb3Sn SRF Cavities for Linear Accelerators”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 462-465. doi:10.18429/JACoW-LINAC2018-TUPO055
[n]	M. Mansouri Sharifabad, A. Ismail, and I. Saleh, “Personnel Safety System in SESAME”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WPO023, pp. 87-89. 
[n]	M. Satoh, K. Furukawa, F. Miyahara, T. Suwada, T. Kudou, and S. Kusano, “Development and Application of the Trigger Timing Watchdog System in KEK Electron/Positron Linac”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME017, pp. 2962-2964. 
[n]	J. Serrano, “FPGA Technology in Instrumentation and Related Tools”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper ITTM02, pp. XX-XX. 
[n]	R. S. Amin et al., “A Preliminary Report from Louisiana State University CAMD Storage Ring Operating with an 11-pole 7.5 T Wiggler”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1682-1685. doi:10.18429/JACoW-IPAC2015-TUPJE034
[n]	S. Deghaye, L. Bojtar, Y. Georgievskiy, and J. Serrano, “OASIS Status Report”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper O4_007. 
[n]	P. Elleaume et al., “Upgrade of the ESRF Accelerator Complex”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC010, pp. 2004-2006. 
[n]	A. Bernhard et al., “Preparations for Beam Tests of a CLIC Damping Wiggler Prototype at ANKA”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPME005, pp. 1568-1570. 
[n]	J. M. Maxson, “Ultrafast Electron Diffraction at Cornell Using Low Emittance Photocathodes”, presented at the NAPAC'22, Albuquerque, NM, USA, Aug. 2022, paper WEZE2, unpublished. 
[n]	R. Chasman, K. Batchelor, N. Fewell, and R. Witkover, “The Dependence of Transverse Emittance Growth on the Quadrupole Focussing Strength in the Brookhaven 200-MeV Linac”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper B06, pp. 47-50. 
[n]	M. Satoh, K. Furukawa, T. Kudou, S. Kusano, and T. Suwada, “EPICS IOC of WindowsXP-based Oscilloscope for Fast BPM Data Acquisition System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP086, pp. 567-569. 
[n]	B. Bradu et al., “Compensation of Beam Induced Effects in LHC Cryogenic Systems”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1205-1208. doi:10.18429/JACoW-IPAC2016-TUPMB048
[n]	K. Brodzinski, B. Bradu, S. D. Claudet, D. Delikaris, L. P. Delprat, and G. Ferlin, “Adaptation of the Cryogenic System Capacity for the LHC Dynamic Heat Load - Operational Experience”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2541-2544. doi:10.18429/JACoW-IPAC2018-WEPMF073
[n]	J. Sebek et al., “Diagnostic Instrumentation for the SSRL 3 GeV Injector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1243-1246. 
[n]	A. Caruso, A. Spart?á, and A. Longhitano, “Steps Forward In The Digital Rf Control System At Lns”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 476-478. 
[n]	P. Hartmann, S. Khan, D. Schirmer, G. Sch??nemann, P. Towalski, and T. Weis, “Fast Orbit Feedback for DELTA and FAIR”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB031, pp. 2752-2754. 
[n]	B. Nash et al., “Touschek Lifetime and Momentum Acceptance Measurements for ESRF”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC008, pp. 2921-2923. 
[n]	G. Winkler, Ph. Gayet, D. Güsewell, and Ch. Titcomb, “Cryogenic Operation and On-line Measurement of RF Losses in the SC Cavities of LEP2”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPP02, pp. 2037-2039. 
[n]	R. K. Reece et al., “First Results of Proton Injection Commissioning of the AGS Booster Synchrotron”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 839-842. 
[n]	L. Calabretta, A. Caruso, A. Spart?á, and E. Zappal?á, “The Radiofrequency Pulsing System at INFN-LNS”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P4-20, pp. XX-XX. 
[n]	E. Matias, G. Judkins, M. McKibben, and J. Swirsky, “The Use of Process and Instrumentation Drawings for Accelerator and Beamline Control Applications at the Canadian Light Source”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP047, pp. 191-193. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search