Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] E. Wooldridge, C. D. Beard, P. A. McIntosh, B. D. Muratori, and S. L. Smith, “BBU Limitations for ERLs”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC059, pp. 199-201.
[n] W. H. Tan, P. Piot, and A. Zholents, “Longitudinal-Phase-Space Manipulation for Efficient Beam-Driven Structure Wakefield Acceleration”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2296-2299. doi:10.18429/JACoW-IPAC2019-WEZZPLS3
[n] P. K. Saha et al., “Beam Commissioning Results of the RCS Injection and Extraction at J-PARC”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP105, pp. 3611-3613.
[n] H. Hotchi, S. Machida, and F. Noda, “Effects of Magnetic Field Tracking Errors on Beam Dynamics at J-PARC RCS”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN046, pp. 4078-4080.
[n] N. Solyak, H. Edwards, I. Gonin, M. Foley, T. Khabiboulline, and D. Mitchell, “Development of the 3.9 GHz 3rd Harmonic Cavity at FNAL”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP43, pp. 429-431.
[n] W. R. Baker, W. L. Gagnon, and F. Voelker, “Flat-Topping Magnet Current for the Berkeley Electron Ring in a Static Magnetic Field”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 1047-1050.
[n] G. Arduini et al., “Status of the LHC Beam in the CERN SPS”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THAGB002, pp. 206-208.
[n] Y. Yuasa et al., “A Monitoring System for a Gas-Sheet Beam Profile Monitor on Linux with EPICS”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP579, pp. XX-XX.
[n] E. Wooldridge, “Alternate Cavity Designs to Reduce BBU”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH041, pp. 2874-2876.
[n] R. P. Johnson, H. P. Bluem, B. C. Craft, R. C. Sah, and D. Y. Wang, “Commissioning of the Synchrotron Light Source at LSU”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 197-200.
[n] B. X. Yang, G. Decker, P. K. Den Hartog, S.-H. Lee, and K. W. Schlax, “Progress in the Development of a Grazing-incidence Insertion Device X-ray Beam Position Monitor”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP189, pp. 441-443.
[n] A. Dubrovin, “Time Stepping Klystron and Lasertron Simulations”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1050-1053.
[n] T. Bohl, T. Linnecar, and E. Shaposhnikova, “Study of a Single-bunch Instability below Transition Energy”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP4A11, pp. 1173-1175.
[n] Z. A. Conway et al., “Reduced-beta Cavities for High-intensity Compact Accelerators”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPLB07, pp. 458-460.
[n] P. K. Saha, H. Hotchi, Y. Irie, S. Machida, and F. Noda, “Updated Simulation for the Nuclear Scattering Loss Estimation at the RCS Injection Area”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN061, pp. 1526-1528.
[n] E. Boers, “Digital Computer Simulation of Three-Dimensional Ion Beam Extraction and Transport Systems”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 275-278.
[n] M. Wenskat, D. Reschke, J. Schaffran, and A. L. Prudnikava, “Nitrogen Infusion R&D on Single Cell Cavities at DESY”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 759-761. doi:10.18429/JACoW-SRF2017-THPB007
[n] S. M. Kocimski and J. L. Detch, “A Two-Dimensional Calculational Model for an Electron Beam Prebuncher”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper TUP0043, pp. 209-211.
[n] V. Variale et al., “Charge Breeding Test Experiment with a Hollow Gun EBIS”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC048, pp. 4167-4169.
[n] Y. Kang, I. E. Campisi, D. Stout, M. Stirbet, M. Drury, and T. Powers, “RF Processing of Couplers for the SNS Superconducting Cavities”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP49, pp. 577-579.
[n] B. X. Yang, J. L. Bailey, S. J. Stein, and D. R. Walters, “Design of a High-Resolution Optical Transition Radiation Imager System for the Linac Coherent Light Source Undulator”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT087, pp. 4209-4211.
[n] T. Bohl, T. Linnecar, E. Shaposhnikova, and J. Tueckmantel, “Study of Different Operating Modes of the 4th RF Harmonic Landau Damping System in the CERN SPS”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP09A, pp. 978-980.
[n] S. Yamamoto, “Development of the Very Short Period Undulators”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1845-1847. doi:10.18429/JACoW-IPAC2014-WEOAA02
[n] R. Monroy-Villa et al., “Design and Fabrication of a Quadrupole-Resonator for Sample R&D”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 838-841. doi:10.18429/JACoW-SRF2019-THP004
[n] S. Alizada and A. Khaleghi, “The Study of Big Data Tools Usages in Synchrotrons”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1428-1431. doi:10.18429/JACoW-ICALEPCS2017-THPHA034
[n] K. Takayama et al., “Emittance Blow up and Halo-formation”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE067, pp. 1413-1415.
[n] J. L. Bailey, T. W. Buffington, and B. X. Yang, “A Wire Scanner Design for Electron Beam Profile Measurement in the Linac Coherent Light Source Undulator”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT065, pp. 3667-3669.
[n] J.-C. Denard, R. Aiello, A. Carniel, and T. Monaci, “Beam Position Monitoring System for ELETTRA”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 726-729.
[n] S. V. Milton et al., “The APS SASE FEL: Status and Commissioning Results”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP95, pp. 2483-2485.
For LaTeX
Use Complete Form
For BibTeX
References
- E. Wooldridge, C. D. Beard, P. A. McIntosh, B. D. Muratori, and S. L. Smith, “BBU Limitations for ERLs”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC059, pp. 199-201.
- W. H. Tan, P. Piot, and A. Zholents, “Longitudinal-Phase-Space Manipulation for Efficient Beam-Driven Structure Wakefield Acceleration”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2296-2299.
- P. K. Saha et al., “Beam Commissioning Results of the RCS Injection and Extraction at J-PARC”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP105, pp. 3611-3613.
- H. Hotchi, S. Machida, and F. Noda, “Effects of Magnetic Field Tracking Errors on Beam Dynamics at J-PARC RCS”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN046, pp. 4078-4080.
- N. Solyak, H. Edwards, I. Gonin, M. Foley, T. Khabiboulline, and D. Mitchell, “Development of the 3.9 GHz 3rd Harmonic Cavity at FNAL”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP43, pp. 429-431.
- W. R. Baker, W. L. Gagnon, and F. Voelker, “Flat-Topping Magnet Current for the Berkeley Electron Ring in a Static Magnetic Field”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 1047-1050.
- G. Arduini et al., “Status of the LHC Beam in the CERN SPS”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THAGB002, pp. 206-208.
- Y. Yuasa et al., “A Monitoring System for a Gas-Sheet Beam Profile Monitor on Linux with EPICS”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP579, pp. XX-XX.
- E. Wooldridge, “Alternate Cavity Designs to Reduce BBU”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH041, pp. 2874-2876.
- R. P. Johnson, H. P. Bluem, B. C. Craft, R. C. Sah, and D. Y. Wang, “Commissioning of the Synchrotron Light Source at LSU”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 197-200.
- B. X. Yang, G. Decker, P. K. Den Hartog, S.-H. Lee, and K. W. Schlax, “Progress in the Development of a Grazing-incidence Insertion Device X-ray Beam Position Monitor”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP189, pp. 441-443.
- A. Dubrovin, “Time Stepping Klystron and Lasertron Simulations”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1050-1053.
- T. Bohl, T. Linnecar, and E. Shaposhnikova, “Study of a Single-bunch Instability below Transition Energy”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP4A11, pp. 1173-1175.
- Z. A. Conway et al., “Reduced-beta Cavities for High-intensity Compact Accelerators”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPLB07, pp. 458-460.
- P. K. Saha, H. Hotchi, Y. Irie, S. Machida, and F. Noda, “Updated Simulation for the Nuclear Scattering Loss Estimation at the RCS Injection Area”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAN061, pp. 1526-1528.
- E. Boers, “Digital Computer Simulation of Three-Dimensional Ion Beam Extraction and Transport Systems”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 275-278.
- M. Wenskat, D. Reschke, J. Schaffran, and A. L. Prudnikava, “Nitrogen Infusion R&D on Single Cell Cavities at DESY”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 759-761.
- S. M. Kocimski and J. L. Detch, “A Two-Dimensional Calculational Model for an Electron Beam Prebuncher”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper TUP0043, pp. 209-211.
- V. Variale et al., “Charge Breeding Test Experiment with a Hollow Gun EBIS”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEC048, pp. 4167-4169.
- Y. Kang, I. E. Campisi, D. Stout, M. Stirbet, M. Drury, and T. Powers, “RF Processing of Couplers for the SNS Superconducting Cavities”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper THP49, pp. 577-579.
- B. X. Yang, J. L. Bailey, S. J. Stein, and D. R. Walters, “Design of a High-Resolution Optical Transition Radiation Imager System for the Linac Coherent Light Source Undulator”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT087, pp. 4209-4211.
- T. Bohl, T. Linnecar, E. Shaposhnikova, and J. Tueckmantel, “Study of Different Operating Modes of the 4th RF Harmonic Landau Damping System in the CERN SPS”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP09A, pp. 978-980.
- S. Yamamoto, “Development of the Very Short Period Undulators”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1845-1847.
- R. Monroy-Villa et al., “Design and Fabrication of a Quadrupole-Resonator for Sample R&D”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 838-841.
- S. Alizada and A. Khaleghi, “The Study of Big Data Tools Usages in Synchrotrons”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1428-1431.
- K. Takayama et al., “Emittance Blow up and Halo-formation”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPLE067, pp. 1413-1415.
- J. L. Bailey, T. W. Buffington, and B. X. Yang, “A Wire Scanner Design for Electron Beam Profile Measurement in the Linac Coherent Light Source Undulator”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT065, pp. 3667-3669.
- J.-C. Denard, R. Aiello, A. Carniel, and T. Monaci, “Beam Position Monitoring System for ELETTRA”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 726-729.
- S. V. Milton et al., “The APS SASE FEL: Status and Commissioning Results”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP95, pp. 2483-2485.
Back to search