Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] N. Majernik, “Beam shaping using an ultra-high vacuum multileaf collimator and emittance exchange beamline”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper MOZA003, unpublished.
[n] S. J. Park, H. Nam, W. H. Hwang and S, and J. Y. Huang, “PERFORMANCE OF PLS BEAM POSITION MONITOR SYSTEM”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEP029, pp. XX-XX.
[n] V. D. Shemelin and M. Liepe, “Superconducting Multicell Cavity Design for the Energy Recovery Linac at Cornell”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP051, pp. 939-941.
[n] E. A. Wadlinger, “Beam Self-Excited RF Cavity Driver for a Deflector or Focusing System”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP38, pp. 148-150.
[n] M. Pont, N. Ayala, G. Benedetti, M. Carl?á, Z. Mart?¡, and R. N????ez-Prieto, “A Pinger Magnet System for the ALBA Synchrotron Light Source”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3039-3042. doi:10.18429/JACoW-IPAC2015-WEPMN050
[n] Y. T. Yan et al., “Virtual Accelerator for Accelerator Optics Improvement”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPE058, pp. 3426-3428.
[n] J. C. Yoon, C. Kim, K. R. Kim, and S. J. Park, “Developing of PBPM Data Acquisition Control System for the PLS”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP019, pp. 4808-4810.
[n] Z. A. Conway et al., “Status of Niowave/Roark ILC Vendor Qualification Tests at Cornell”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP045, pp. 924-926.
[n] L. Huang, H. Liu, Y. Liu, S. Wang, and S. Xu, “Simulation and measurement of beam loading effects in magnetic alloy RF cavity of CSNS RCS”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1687-1690. doi:10.18429/JACoW-IPAC2023-TUPA164
[n] V. D. Shemelin et al., “Status of HOM Load for the Cornell ERL Injector”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH177, pp. 478-480.
[n] J.-S. Oh, I. S. Ko, T.-Y. Lee, and W. Namkung, “Wake Field Effect on the SASE Performance of PAL XFEL”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPT017, pp. 1549-1551.
[n] G. Benedetti, U. Iriso, Z. Mart?¡, and F. P?®rez, “First Study for an Upgrade of the ALBA Lattice”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1544-1546. doi:10.18429/JACoW-IPAC2019-TUPGW061
[n] R. L. Geng, H. Padamsee, A. K. Seaman, and V. D. Shemelin, “World Record Accelerating Gradient Achieved in a Superconducting Niobium RF Cavity”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper ROAC009, pp. 653-655.
[n] J. M. Maus, R. A. Jameson, and A. Schempp, “PteqHI Development and Code Comparing”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper THPSC031, pp. 322-325.
[n] E. A. Wadlinger, “The Brown-Servranckx Matching Transformer for Simultaneous RFQ to DTL H+ and H- Matching”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP37, pp. 146-147.
[n] K. A. Brown, M. Harvey, Y. C. Jing, P. K. Kankiya, and S. Seletskiy, “Online Simulation Framework Through HTTP Services”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 734-738. doi:10.18429/JACoW-ICALEPCS2017-TUPHA135
[n] A. Ando, T. Itahashi, I. Miura, and T. Nakatsuka, “Injection and Extraction System of the RCNP Ring Cyclotron”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F6-05, pp. 346-349.
[n] O. Xiao et al., “Design Study of RF Section and Cavities for Cepc 650 MHz Klystron”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 543-545. doi:10.18429/JACoW-IPAC2016-MOPMY014
[n] V. D. Shemelin and S. A. Belomestnykh, “Using a Resistive Material for HOM Damping”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC063, pp. 3037-3039.
[n] A. Shimizu, I. Miura, S. Ichida, and I. Taguchi, “Vacuum System of the RCNP Ring Cyclotron”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F3-03, pp. 228-231.
[n] M. Ferrario et al., “SPARCLAB Recent Results”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUOCB102, pp. 1114-1116.
[n] D. J. Clark, “Cyclotron Injection Systems (Invited paper)”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 191-204.
[n] H. S. Kim, Y.-S. Cho, and H.-J. Kwon, “Operation of KOMAC 100 MeV Linac”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 683-687. doi:10.18429/JACoW-LINAC2016-TH1A02
For LaTeX
Use Complete Form
For BibTeX
References
- N. Majernik, “Beam shaping using an ultra-high vacuum multileaf collimator and emittance exchange beamline”, presented at the 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, paper MOZA003, unpublished.
- S. J. Park, H. Nam, W. H. Hwang and S, and J. Y. Huang, “PERFORMANCE OF PLS BEAM POSITION MONITOR SYSTEM”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper WEP029, pp. XX-XX.
- V. D. Shemelin and M. Liepe, “Superconducting Multicell Cavity Design for the Energy Recovery Linac at Cornell”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP051, pp. 939-941.
- E. A. Wadlinger, “Beam Self-Excited RF Cavity Driver for a Deflector or Focusing System”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper MOP38, pp. 148-150.
- M. Pont, N. Ayala, G. Benedetti, M. Carl?á, Z. Mart?¡, and R. N????ez-Prieto, “A Pinger Magnet System for the ALBA Synchrotron Light Source”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3039-3042.
- Y. T. Yan et al., “Virtual Accelerator for Accelerator Optics Improvement”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPE058, pp. 3426-3428.
- J. C. Yoon, C. Kim, K. R. Kim, and S. J. Park, “Developing of PBPM Data Acquisition Control System for the PLS”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP019, pp. 4808-4810.
- Z. A. Conway et al., “Status of Niowave/Roark ILC Vendor Qualification Tests at Cornell”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP045, pp. 924-926.
- L. Huang, H. Liu, Y. Liu, S. Wang, and S. Xu, “Simulation and measurement of beam loading effects in magnetic alloy RF cavity of CSNS RCS”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA164, pp. 1687-1690.
- V. D. Shemelin et al., “Status of HOM Load for the Cornell ERL Injector”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH177, pp. 478-480.
- J.-S. Oh, I. S. Ko, T.-Y. Lee, and W. Namkung, “Wake Field Effect on the SASE Performance of PAL XFEL”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPT017, pp. 1549-1551.
- G. Benedetti, U. Iriso, Z. Mart?¡, and F. P?®rez, “First Study for an Upgrade of the ALBA Lattice”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1544-1546.
- R. L. Geng, H. Padamsee, A. K. Seaman, and V. D. Shemelin, “World Record Accelerating Gradient Achieved in a Superconducting Niobium RF Cavity”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper ROAC009, pp. 653-655.
- J. M. Maus, R. A. Jameson, and A. Schempp, “PteqHI Development and Code Comparing”, in Proc. 10th Int. Computational Accelerator Physics Conf. (ICAP'09), San Francisco, CA, USA, Aug.-Sep. 2009, paper THPSC031, pp. 322-325.
- E. A. Wadlinger, “The Brown-Servranckx Matching Transformer for Simultaneous RFQ to DTL H+ and H- Matching”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper MOP37, pp. 146-147.
- K. A. Brown, M. Harvey, Y. C. Jing, P. K. Kankiya, and S. Seletskiy, “Online Simulation Framework Through HTTP Services”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 734-738.
- A. Ando, T. Itahashi, I. Miura, and T. Nakatsuka, “Injection and Extraction System of the RCNP Ring Cyclotron”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F6-05, pp. 346-349.
- O. Xiao et al., “Design Study of RF Section and Cavities for Cepc 650 MHz Klystron”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 543-545.
- V. D. Shemelin and S. A. Belomestnykh, “Using a Resistive Material for HOM Damping”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEC063, pp. 3037-3039.
- A. Shimizu, I. Miura, S. Ichida, and I. Taguchi, “Vacuum System of the RCNP Ring Cyclotron”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F3-03, pp. 228-231.
- M. Ferrario et al., “SPARCLAB Recent Results”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUOCB102, pp. 1114-1116.
- D. J. Clark, “Cyclotron Injection Systems (Invited paper)”, in Proc. 6th Int. Cyclotron Conf. (Cyclotrons'72), Vancouver, Canada, Jul. 1972, pp. 191-204.
- H. S. Kim, Y.-S. Cho, and H.-J. Kwon, “Operation of KOMAC 100 MeV Linac”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 683-687.
Back to search