JaCoW Logo

Reference Search

Favourites


For Word

[n]	H. Katagiri, K. Furukawa, H. Hanaki, and S. Anami, “Microwave Monitor System for the KEKB Injector Linac”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D025, pp. 142-144. 
[n]	J. G. Melton, M. J. Burns, and D. J. Honaberger, “Pulsed Taut-Wire Measurement of the Magnetic Alignment of the ITS Induction Cells”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2944-2947. 
[n]	H. F. Ouyang, T. Huang, J. Li, J. Peng, and T. G. Xu, “Experimental Results of Beam Halo at IHEP”, in Proc. HB'12, Beijing, China, Sep. 2012, paper MOP243, pp. 151-153. 
[n]	G. E. Lee-Whiting and J. H. Ormrod, “Longitudinal Space-Charge Effects in Bunchers”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper E-4, pp. 346-352. 
[n]	F. Marcellini et al., “Coupling Impedance of DAFNE Upgraded Vacuum Chamber”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP051, pp. 1661-1663. 
[n]	K. A. Brown et al., “First Beam Tests of the Muon Collider Target Test Beam Line at the AGS”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH129, pp. 1511-1513. 
[n]	S. Schaller et al., “Experience Controlling the LAMPF-PSR Accelerator Complex”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 7-10. doi:10.18429/JACoW-ICALEPCS1991-S01SRA02
[n]	N. Kuklev, “Fast linac optics measurement with machine learning methods”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper THPB003, unpublished. 
[n]	P. Goslawski et al., “A Highly Competitive Non-Standard Lattice for a 4th Generation Light Source With Metrology and Timing Capabilities”, in Proc. FLS'23, Luzern, Switzerland, Aug.-Sep. 2023, pp. 58-61. doi:10.18429/JACoW-FLS2023-TU1B1
[n]	Z. Insepov, B. W. Adams, J. Norem, and V. Ivanov, “Simulations of Fast X-ray Detectors Based on Multichannel Plates”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR067, pp. 939-941. 
[n]	V. Pettinacci, D. Alesini, L. Pellegrino, and L. Palumbo, “Thermal-mechanical Analysis of the RF Structures for the ELI-NP Proposal”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3860-3862. doi:10.18429/JACoW-IPAC2014-THPRI043
[n]	J. C. Huang, J. Chen, C.-S. Hwang, F.-Y. Lin, and Y. T. Yu, “Heat Load Budget on TPS Undulator in Vacuum”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP077, pp. 741-743. 
[n]	P. Korysko et al., “Updates, Status and Experiments of CLEAR, the CERN Linear Electron Accelerator for Research”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 3022-3025. doi:10.18429/JACoW-IPAC2022-THPOMS030
[n]	Y. S. Wong, K.-B. Liu, and J. F. Chen, “A Novel High Step-down DC-DC Converter with Isolated Transformer and Switched Capacitor Techniques for Corrector Magnet Bulk Power in Taiwan Photon Source”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3769-3771. doi:10.18429/JACoW-IPAC2018-THPAL055
[n]	B. D. Muratori and Y. M. Saveliev, “ALICE (ERLP) Injector Design”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC058, pp. 196-198. 
[n]	S. Samsam et al., “High order mode analysis in energy recovery linac based on an energy budget model”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 77-80. doi:10.18429/JACoW-IPAC2023-MOPA018
[n]	L. Serafini et al., “Symmetric Compton Scattering:  A Way Towards Plasma Heating and Tunable Mono-chromatic Gamma-rays”, in Proc. FLS'23, Luzern, Switzerland, Aug.-Sep. 2023, pp. 95-98. doi:10.18429/JACoW-FLS2023-TU4P11
[n]	A. Chance, T. Da Silva, B. Dalena, and A. Ghribi, “Status and plans for the high energy booster of the future electron-positron collider FCC-ee”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 708-711. doi:10.18429/JACoW-IPAC2023-MOPL070
[n]	K. T. McDonald et al., “The R&D Program for Targetry at a Neutrino Factory”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH156, pp. 1586-1588. 
[n]	M. Uesaka, K. Dobashi, T. Fujiwara, H. Harada, K. Tagi, and M. Yamamoto, “Application of X-band 30 MeV Linac Neutron Source to Nuclear Material Analysis for Fukushima Nuclear Plant Accident”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWA010, pp. 3648-3650. 
[n]	E. Panofski, A. Jankowiak, T. Kamps, and A. Neumann, “Multi-Objective Optimization of an SRF Photoinjector with Booster Section for High Brightness Beam Performance”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3193-3196. doi:10.18429/JACoW-IPAC2018-THPAF087
[n]	J. C. Smith et al., “Bench-top Impedance Measurements for a Rotatable Copper Collimator for the LHC Phase II Collimation Upgrade”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP073, pp. 1703-1705. 
[n]	D. Wollmann et al., “Experimental Verification for a Collimator with In-jaw Beam Position Monitors”, in Proc. HB'12, Beijing, China, Sep. 2012, paper MOP242, pp. 146-150. 
[n]	D. Samoilenko et al., “Realistic modeling of fully coherent light sources”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPL012, unpublished. 
[n]	S. Redaelli, X. Buffat, M. Lamont, G. J. M?â, R. J. Steinhagen, and J. Wenninger, “Commissioning of Ramp and Squeeze at the LHC”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD54, pp. 202-206. 
[n]	E. Karantzoulis, A. Carniel, R. De Monte, S. Krecic, and C. P. Pasotti, “Status of Elettra and Future Upgrades”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4054-4056. doi:10.18429/JACoW-IPAC2018-THPMF010
[n]	T. Miyajima et al., “Low Emittance Electron Beam Transportation in Compact ERL Injector”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3104-3106. doi:10.18429/JACoW-IPAC2014-THPRO093
[n]	E. Panofski, A. Jankowiak, T. Kamps, and G. Klemz, “Virtual Cathode Drive Laser Diagnostics with a Large Dynamic Range for a Continuous Wave SRF Photoinjector”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2251-2253. doi:10.18429/JACoW-IPAC2014-WEPME001
[n]	Y. Wei, Y. Jiao, Y. Guo, and Z. Duan, “Simulation studies of beam commissioning for the HEPS high-energy transfer line”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4262-4265. doi:10.18429/JACoW-IPAC2023-THPA126
[n]	J. H. Hong et al., “High-Power RF Test of an RF-Gun for PAL-XFEL”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD061, pp. 1539-1541. 
[n]	M. Turner, E. Gschwendtner, A. V. Petrenko, K. V. Lotov, and A. Sosedkin, “Proton Beam Defocusing as a Result of Self-Modulation in Plasma”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 707-709. doi:10.18429/JACoW-NAPAC2016-WEPOA09
[n]	H. C. Li, S. H. Chang, W. S. Chiou, F.-Z. Hsiao, and Z.-D. Tsai, “The Cryogenic Supervision System in NSRRC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE003, pp. 844-846. 
[n]	S. Kwon et al., “High Beam Current Operation with Beam Diagnostics at LIPAc”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 649-655. doi:10.18429/JACoW-HB2023-FRC1I2
[n]	R. W. Aßmann, “EuPRAXIA: The First FEL User Facility Driven by a Plasma Accelerator”, presented at the FLS'23, Luzern, Switzerland, Aug.-Sep. 2023, paper MO1L1, unpublished. 
[n]	G. Golluccio et al., “Instruments and Methods for the Magnetic Measurement of the Super-FRS Magnets”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1183-1185. doi:10.18429/JACoW-IPAC2016-TUPMB037
[n]	I. Bahns et al., “A CBXFEL demonstrator setup at the European XFEL”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1828-1830. doi:10.18429/JACoW-IPAC2023-TUPL027
[n]	Y.-H. Liu, J.-C. Chang, C. S. Chen, H. H. Chen, and J.-R. Chen, “Conductive EMI Reduction to Kicker Magnet Power Supply in NSRRC”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD059, pp. 3647-3649. 
[n]	J. Zhao, J. E. Chen, Z. Y. Guo, Y. R. Lu, S. X. Peng, and Q. F. Zhou, “Radiation Safety System for PKUNIFTY Project”, in Proc. HB'12, Beijing, China, Sep. 2012, paper MOP223, pp. 112-114. 
[n]	C. Vicario, D. Filippetto, G. Gatti, and A. Ghigo, “Drive Laser System for the SPARC Photoinjector”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP073, pp. 539-541. 
[n]	H.-J. Kwon et al., “Five Year Operation of the 20-MeV Proton Accelerator at KAERI”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP045, pp. 3838-3840. 
[n]	H. Shaker, S. Doebert, R. Leuxe, L. Dassa, and S. Sanaye Hajari, “Sub-harmonic Buncher Design for the CLIC Drive Beam Injector”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPME052, pp. 1685-1687. 
[n]	A. Apyan, L. C. Deacon, E. Gschwendtner, T. Lefevre, R. Appleby, and S. C. Tygier, “CLIC Luminosity Monitoring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR046, pp. 885-887. 
[n]	L. Lari et al., “Energy Deposition Studies for Possible Innovative Phase II Collimator Designs”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP015, pp. 2811-2813. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search