Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Arianer, A. Cabrespine, G. Deschamps, and C. Goldstein, “CRYEBIS, a Multi-Purpose EBIS for the Synchrotron Saturne II”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3713-3716.
[n] O. R. Blanco-Garc?¡a, D. Amorim, M. A. Deniaud, A. Loulergue, L. S. Nadolski, and R. Nagaoka, “Status of the Soleil Upgrade Lattice Robustness Studies”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 433-436. doi:10.18429/JACoW-IPAC2022-MOPOTK004
[n] P. Craievich, A. Fabris, C. Pasotti, and M. Svandrlik, “RF System for the ELETTRA Booster Synchrotron”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP1B12, pp. 1957-1959.
[n] V. B. Reva et al., “COSY 2 MeV Cooler: Design, Diagnostic and Commissioning”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 777-779. doi:10.18429/JACoW-IPAC2014-MOPRI075
[n] S. Wang, J. Guo, R. A. Rimmer, and H. Wang, “JLEIC SRF Cavity RF Design”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2522-2524. doi:10.18429/JACoW-IPAC2016-WEPMW039
[n] Z. B. Sun, G. Liu, W. Liu, F. L. Shang, L. Shang, and W. B. Song, “Efficiency and Error Analysis of the HALS Injection Scheme”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 5008-5010. doi:10.18429/JACoW-IPAC2018-THPML138
[n] X. W. Dong and M. Borland, “An Optimization of a DC Injector with Merger for the Energy Recovery Linac Upgrade to the APS”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP044, pp. 455-457.
[n] J. Einstein-Curtis et al., “LLRF and pulse-to-pulse correction for a compact linac”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 270-272. doi:10.18429/JACoW-LINAC2024-MOPB102
[n] B.-S. Park, B. H. Choi, and I. S. Hong, “Progress on RFQ Fabrication for RISP Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1308-1310. doi:10.18429/JACoW-IPAC2016-TUPMR030
[n] C. D. Beard et al., “EMMA RF Cavity Design and Prototype Testing at Daresbury”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP002, pp. 3374-3376.
[n] A. Uchiyama, N. Fukunishi, and M. Komiyama, “EPICS PV Management and Method for RIBF Control System”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 769-771. doi:10.18429/JACoW-ICALEPCS2015-WEPGF032
[n] M. Tigner and H. Padamsee, “Frontier Applications of RF Superconductivity for High Energy Physics in the TEV Region”, in Proc. SRF'87, Lemont, IL, USA, Sep. 1987, paper SRF87A01, pp. XX-XX.
[n] C. Steier et al., “Successful Completion of the ALS Brightness Upgrade”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUOCB2, pp. 433-435.
[n] H. Wang et al., “Use of an Injection Locked Magnetron to Drive a Superconducting RF Cavity”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB067, pp. 4026-4028.
[n] S. Geyer, O. Meusel, D. Ries, and O. K. Kester, “A Transverse Electron Target for Heavy Ion Storage Rings”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA015, pp. 97-99.
[n] P. W. Huang, W.-H. Huang, and C.-X. Tang, “Model of Photocathode for CW Electron Gun”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 394-396. doi:10.18429/JACoW-FEL2017-WEA02
[n] P. I. Volz, S. Grimmer, M. Huck, and A. Meseck, “Goubau-Line Set Up for Bench Testing Impedance of In-Vacuum Undulator Components”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3883-3885. doi:10.18429/JACoW-IPAC2021-THPAB057
[n] X. Q. Wang et al., “Research on DC-clearing Electric Field and Changes of Focusing Structure Parameters of Storage Ring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP53, pp. 1596-1598.
[n] B. Freemire et al., “Low RF loss DC conductive ceramic for RF windows”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2733-2735. doi:10.18429/JACoW-IPAC2024-WEPS17
[n] J. A. Dobbing et al., “Diamond Booster Magnet Power Converters”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS124, pp. 2664-2666.
[n] C. Cyterski and E. P. Chin, “Personnel Protection System Upgrade for the LCLS Electron Beam Linac”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 157-159. doi:10.18429/JACoW-ICALEPCS2015-MOPGF029
[n] E. Benedetto et al., “Effect of Lattice and Electron Distribution in Electron-Cloud Instability Simulations for the CERN SPS and LHC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper ROPB004, pp. 387-389.
[n] Ch. Ricaud, E. Baron, J. Bony, M. P. Bourgarel, B. Bru, and R. Vienet, “Commissioning of the New High Intensity Axial Injection System for GANIL”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper IXC-01, pp. 446-449.
[n] S. Boucher et al., “Compact, Inexpensive X-band Linacs as Radioactive Isotope Source Replacements”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWA051, pp. 3746-3748.
[n] M. A. Palmer, “An Overview of the US Muon Accelerator Program”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper MOAM2HA02, pp. 16-20.
[n] W. Beeckman et al., “Development, Fabrication and Testing of the RF-Kicker for the Acculinna-2 Fragment Separator”, in Proc. HIAT'22, Darmstadt, Germany, Jun.-Jul. 2022, pp. 37-40. doi:10.18429/JACoW-HIAT2022-MO4C3
[n] S. X. Zheng et al., “Primary Design of DTL for CPHS”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD048, pp. 795-797.
[n] B. P. Wang, Z. C. Chen, Y. B. Leng, L. Y. Yu, R. X. Yuan, and W. M. Zhou, “Design of RF Front End for Cavity Beam Position Monitor based on ICs”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUPA22, pp. 383-385.
[n] F. J. Willeke, “Design Status of the EIC/Electron Ion Collider Design and Path Forward”, presented at the HIAT'22, Darmstadt, Germany, Jun.-Jul. 2022, paper FR1I1, unpublished.
[n] T. Shibata, K. Ishii, H. Matsumoto, N. Matsumoto, T. Sugimoto, and K. Fan, “The New High Field Injection Septum Magnet System for Main Ring of J-PARC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 576-578. doi:10.18429/JACoW-IPAC2017-MOPIK034
[n] A. M. Toader, D. Angal-Kalinin, R. J. Barlow, and F. Jackson, “Effect of Collimator Wakefields in the Beam Delivery System of the International Linear Collider”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP167, pp. 2880-2882.
[n] T. Abe, T. Kageyama, H. Sakai, Y. Takeuchi, and K. Yoshino, “RF Accelerating Structure for the Damping Ring of the SuperKEKB Injector”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE087, pp. 3548-3550.
[n] P. H. Williams et al., “Developments in the CLARA FEL Test Facility Accelerator Design and Simulations”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 797-800. doi:10.18429/JACoW-IPAC2016-MOPOW037
[n] R. A. Krempaska, A. G. Bertrand, C. E. Higgs, R. Kapeller, H. Lutz, and M. Provenzano, “How to Maintain Hundreds of Computers Offering Different Functionalities with Only Two System Administrators”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOMAU007, pp. 56-58.
[n] E. Trachanas et al., “Automated Procedure for Conditioning of Normal Conducting Accelerator Cavities”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 699-703. doi:10.18429/JACoW-ICALEPCS2023-TUPDP080
[n] A. V. Tollestrup et al., “Measurements of the Longitudinal and Transverse Beam Loss at the Tevatron”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB040, pp. 2497-2499.
[n] W. A. Barth, V. Gettmann, S. Mickat, and P. Gerhard, “Superconducting CW Heavy Ion Linac at GSI”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB074, pp. 645-647.
[n] M. Borland, V. Sajaev, and Y. Sun, “A Seven-bend-achromat Lattice as a Potential Upgrade for the Advanced Photon Source”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPHO07, pp. 249-251.
[n] C. Rossi et al., “Commissioning and Operational Experience Gained with the Linac4 RFQ at CERN”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP037, pp. 926-928.
[n] A. V. Shemyakin, R. Prakash, and K. Seiya, “Finding Beam Loss Locations in a Linac with Oscillating Dipole Correctors”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 663-666. doi:10.18429/JACoW-NAPAC2019-WEPLM02
[n] A. Brauch et al., “Bunch Length Measurement System Downstream the Injector of the S-DALINAC”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 200-203. doi:10.18429/JACoW-IBIC2023-TUP009
[n] M. Vaz, A. M. Cascadan, V. F. Ferreira, T. Paiva, L. A. Ramalho, and A. A. Shinoda, “A Framework for Development and Test of xTCA Modules With FPGA Based Systems for Particle Detectors”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 88-90. doi:10.18429/JACoW-PCAPAC2016-THDAPLCO06
[n] Z. Y. Guo et al., “Beam Instability Studies in the BEPC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP7B09, pp. 1127-1129.
[n] S. Di Mitri and A. Zholents, “Trajectory Correction in the Fermi@Elettra Linac”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC010, pp. 2993-2995.
[n] D. Neuffer et al., “Observation of Space-Charge Effects in the Los Alamos Proton Storage Ring”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1893-1896.
[n] K. Saito et al., “An Induction Linac and Pulsed Power System at KEK”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 673-676.
[n] S. P. Antipov et al., “Experimental Observation of Energy Modulation in Electron Beams Passing through Terahertz Dielectric Wakefield Structures”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP012, pp. 595-597.
[n] K. Y. Ng and A. Bogacz, “Low-Dispersion γt Jump for the Main Injector”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAR17, pp. 3388-3390.
[n] Y. Batygin et al., “MUSES Project of RIKEN RI Beam Factory”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP22F, pp. 529-531.
[n] M. Mansouri Sharifabad, A. Ismail, and I. Saleh, “Personnel Safety System in SESAME”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WPO023, pp. 87-89.
[n] V. V. Bezuglov et al., “High-Power Industrial Accelerator ILU-14 for E-Beam and X-Ray Processing”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUIOA05, pp. 409-412.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Arianer, A. Cabrespine, G. Deschamps, and C. Goldstein, “CRYEBIS, a Multi-Purpose EBIS for the Synchrotron Saturne II”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3713-3716.
- O. R. Blanco-Garc?¡a, D. Amorim, M. A. Deniaud, A. Loulergue, L. S. Nadolski, and R. Nagaoka, “Status of the Soleil Upgrade Lattice Robustness Studies”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 433-436.
- P. Craievich, A. Fabris, C. Pasotti, and M. Svandrlik, “RF System for the ELETTRA Booster Synchrotron”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP1B12, pp. 1957-1959.
- V. B. Reva et al., “COSY 2 MeV Cooler: Design, Diagnostic and Commissioning”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 777-779.
- S. Wang, J. Guo, R. A. Rimmer, and H. Wang, “JLEIC SRF Cavity RF Design”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2522-2524.
- Z. B. Sun, G. Liu, W. Liu, F. L. Shang, L. Shang, and W. B. Song, “Efficiency and Error Analysis of the HALS Injection Scheme”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 5008-5010.
- X. W. Dong and M. Borland, “An Optimization of a DC Injector with Merger for the Energy Recovery Linac Upgrade to the APS”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6RFP044, pp. 455-457.
- J. Einstein-Curtis et al., “LLRF and pulse-to-pulse correction for a compact linac”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 270-272.
- B.-S. Park, B. H. Choi, and I. S. Hong, “Progress on RFQ Fabrication for RISP Accelerator”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1308-1310.
- C. D. Beard et al., “EMMA RF Cavity Design and Prototype Testing at Daresbury”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP002, pp. 3374-3376.
- A. Uchiyama, N. Fukunishi, and M. Komiyama, “EPICS PV Management and Method for RIBF Control System”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 769-771.
- M. Tigner and H. Padamsee, “Frontier Applications of RF Superconductivity for High Energy Physics in the TEV Region”, in Proc. 3rd Int. Conf. RF Superconductivity (SRF'87), Lemont, IL, USA, Sep. 1987, paper SRF87A01, pp. XX-XX.
- C. Steier et al., “Successful Completion of the ALS Brightness Upgrade”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUOCB2, pp. 433-435.
- H. Wang et al., “Use of an Injection Locked Magnetron to Drive a Superconducting RF Cavity”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEB067, pp. 4026-4028.
- S. Geyer, O. Meusel, D. Ries, and O. K. Kester, “A Transverse Electron Target for Heavy Ion Storage Rings”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPEA015, pp. 97-99.
- P. W. Huang, W.-H. Huang, and C.-X. Tang, “Model of Photocathode for CW Electron Gun”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 394-396.
- P. I. Volz, S. Grimmer, M. Huck, and A. Meseck, “Goubau-Line Set Up for Bench Testing Impedance of In-Vacuum Undulator Components”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3883-3885.
- X. Q. Wang et al., “Research on DC-clearing Electric Field and Changes of Focusing Structure Parameters of Storage Ring”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUP53, pp. 1596-1598.
- B. Freemire et al., “Low RF loss DC conductive ceramic for RF windows”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS17, pp. 2733-2735.
- J. A. Dobbing et al., “Diamond Booster Magnet Power Converters”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS124, pp. 2664-2666.
- C. Cyterski and E. P. Chin, “Personnel Protection System Upgrade for the LCLS Electron Beam Linac”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 157-159.
- E. Benedetto et al., “Effect of Lattice and Electron Distribution in Electron-Cloud Instability Simulations for the CERN SPS and LHC”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper ROPB004, pp. 387-389.
- Ch. Ricaud, E. Baron, J. Bony, M. P. Bourgarel, B. Bru, and R. Vienet, “Commissioning of the New High Intensity Axial Injection System for GANIL”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper IXC-01, pp. 446-449.
- S. Boucher et al., “Compact, Inexpensive X-band Linacs as Radioactive Isotope Source Replacements”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWA051, pp. 3746-3748.
- M. A. Palmer, “An Overview of the US Muon Accelerator Program”, in Proc. 9th Workshop on Beam Cooling and Related Topics (COOL'13), Mürren, Switzerland, Jun. 2013, paper MOAM2HA02, pp. 16-20.
- W. Beeckman et al., “Development, Fabrication and Testing of the RF-Kicker for the Acculinna-2 Fragment Separator”, in Proc. 15th International Conference on Heavy Ion Accelerator Technology (HIAT'22), Darmstadt, Germany, Jun.-Jul. 2022, pp. 37-40.
- S. X. Zheng et al., “Primary Design of DTL for CPHS”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD048, pp. 795-797.
- B. P. Wang, Z. C. Chen, Y. B. Leng, L. Y. Yu, R. X. Yuan, and W. M. Zhou, “Design of RF Front End for Cavity Beam Position Monitor based on ICs”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper TUPA22, pp. 383-385.
- F. J. Willeke, “Design Status of the EIC/Electron Ion Collider Design and Path Forward”, presented at the 15th International Conference on Heavy Ion Accelerator Technology (HIAT'22), Darmstadt, Germany, Jun.-Jul. 2022, paper FR1I1, unpublished.
- T. Shibata, K. Ishii, H. Matsumoto, N. Matsumoto, T. Sugimoto, and K. Fan, “The New High Field Injection Septum Magnet System for Main Ring of J-PARC”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 576-578.
- A. M. Toader, D. Angal-Kalinin, R. J. Barlow, and F. Jackson, “Effect of Collimator Wakefields in the Beam Delivery System of the International Linear Collider”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP167, pp. 2880-2882.
- T. Abe, T. Kageyama, H. Sakai, Y. Takeuchi, and K. Yoshino, “RF Accelerating Structure for the Damping Ring of the SuperKEKB Injector”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE087, pp. 3548-3550.
- P. H. Williams et al., “Developments in the CLARA FEL Test Facility Accelerator Design and Simulations”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 797-800.
- R. A. Krempaska, A. G. Bertrand, C. E. Higgs, R. Kapeller, H. Lutz, and M. Provenzano, “How to Maintain Hundreds of Computers Offering Different Functionalities with Only Two System Administrators”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOMAU007, pp. 56-58.
- E. Trachanas et al., “Automated Procedure for Conditioning of Normal Conducting Accelerator Cavities”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP080, pp. 699-703.
- A. V. Tollestrup et al., “Measurements of the Longitudinal and Transverse Beam Loss at the Tevatron”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB040, pp. 2497-2499.
- W. A. Barth, V. Gettmann, S. Mickat, and P. Gerhard, “Superconducting CW Heavy Ion Linac at GSI”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPB074, pp. 645-647.
- M. Borland, V. Sajaev, and Y. Sun, “A Seven-bend-achromat Lattice as a Potential Upgrade for the Advanced Photon Source”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPHO07, pp. 249-251.
- C. Rossi et al., “Commissioning and Operational Experience Gained with the Linac4 RFQ at CERN”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP037, pp. 926-928.
- A. V. Shemyakin, R. Prakash, and K. Seiya, “Finding Beam Loss Locations in a Linac with Oscillating Dipole Correctors”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 663-666.
- A. Brauch et al., “Bunch Length Measurement System Downstream the Injector of the S-DALINAC”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper TUP009, pp. 200-203.
- M. Vaz, A. M. Cascadan, V. F. Ferreira, T. Paiva, L. A. Ramalho, and A. A. Shinoda, “A Framework for Development and Test of xTCA Modules With FPGA Based Systems for Particle Detectors”, in Proc. 11th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'16), Campinas, Brazil, Oct. 2016, pp. 88-90.
- Z. Y. Guo et al., “Beam Instability Studies in the BEPC”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP7B09, pp. 1127-1129.
- S. Di Mitri and A. Zholents, “Trajectory Correction in the Fermi@Elettra Linac”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC010, pp. 2993-2995.
- D. Neuffer et al., “Observation of Space-Charge Effects in the Los Alamos Proton Storage Ring”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1893-1896.
- K. Saito et al., “An Induction Linac and Pulsed Power System at KEK”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 673-676.
- S. P. Antipov et al., “Experimental Observation of Energy Modulation in Electron Beams Passing through Terahertz Dielectric Wakefield Structures”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPP012, pp. 595-597.
- K. Y. Ng and A. Bogacz, “Low-Dispersion γt Jump for the Main Injector”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAR17, pp. 3388-3390.
- Y. Batygin et al., “MUSES Project of RIKEN RI Beam Factory”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP22F, pp. 529-531.
- M. Mansouri Sharifabad, A. Ismail, and I. Saleh, “Personnel Safety System in SESAME”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper WPO023, pp. 87-89.
- V. V. Bezuglov et al., “High-Power Industrial Accelerator ILU-14 for E-Beam and X-Ray Processing”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUIOA05, pp. 409-412.
Back to search