Favourites
For Word
[n] A. A. Sulimov, J. H. Thie, M. Pekeler, and D. Trompetter, “The Statistics of Industrial XFEL Cavities Fabrication at Research Instruments”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP051, pp. 234-236.
[n] S. Chaurize et al., “Optimization of the Booster Notch System at Fermilab”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2002-2004. doi:10.18429/JACoW-IPAC2017-TUPIK117
[n] U. Vogel, “A System for High Field Pulsing and Demagnetizing of Multipole Magnets in the AGS”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 750-752.
[n] Y. Joo, P. Buaphad, H. R. Lee, S. C. Cha, and Y. Kim, “Design of 9/6 MeV S-band Electron Linac Structure with 1.5 Bunching Cells”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4635-4638. doi:10.18429/JACoW-IPAC2018-THPMK139
[n] N. Hubert, L. Cassinari, and L. S. Nadolski, “Introduction of Photon BPMs in SOLEIL Global Orbit Feedback Systems”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOPA39, pp. 150-152.
[n] F. Gerigk, M. Vretenar, C. Rossi, R. Garoby, K. Hanke, and A. M. Lombardi, “Design of the LINAC4, A New Injector for the CERN Booster”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper TUP03, pp. 291-293.
[n] P. J. Tallerico and J. E. Rankin, “Computer Modeling of the Gyrocon”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4015-4018.
[n] N. Li, C. Chen, H. J. Hu, J. Jin, W. Y. Wen, and L. Yin, “Accurately Determining the Parameters of a Magnet Coil by 3D CAD Design”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD019, pp. 3539-3541.
[n] V. Tioukine, K. Aulenbacher, H. Euteneuer, K.-H. Kaiser, and S. Ratschow, “Spin Manipulation at MAMI - C”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPDO022, pp. 1816-1818.
[n] K. Pepitone, S. Doebert, B. Cadilhon, B. Cassany, and J. Gardelle, “LEETCHI: The High Current Electron Source for the CLIC Drive Beam Injector”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 870-872. doi:10.18429/JACoW-LINAC2016-THPLR013
[n] M. Meddahi and W. Herr, “Aperture and Stability Studies for the CNGS Proton Beam Line”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT010, pp. 1150-1152.
[n] T. Adachi and I. Sakai, “Estimation of the Particle Density in Transverse Phase Space Using a Multi-Wire Profile Monitor”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP25F, pp. 1479-1481.
For LaTeX
Use Complete Form
For BibTeX
References
- A. A. Sulimov, J. H. Thie, M. Pekeler, and D. Trompetter, “The Statistics of Industrial XFEL Cavities Fabrication at Research Instruments”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP051, pp. 234-236.
- S. Chaurize et al., “Optimization of the Booster Notch System at Fermilab”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2002-2004.
- U. Vogel, “A System for High Field Pulsing and Demagnetizing of Multipole Magnets in the AGS”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 750-752.
- Y. Joo, P. Buaphad, H. R. Lee, S. C. Cha, and Y. Kim, “Design of 9/6 MeV S-band Electron Linac Structure with 1.5 Bunching Cells”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4635-4638.
- N. Hubert, L. Cassinari, and L. S. Nadolski, “Introduction of Photon BPMs in SOLEIL Global Orbit Feedback Systems”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOPA39, pp. 150-152.
- F. Gerigk, M. Vretenar, C. Rossi, R. Garoby, K. Hanke, and A. M. Lombardi, “Design of the LINAC4, A New Injector for the CERN Booster”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper TUP03, pp. 291-293.
- P. J. Tallerico and J. E. Rankin, “Computer Modeling of the Gyrocon”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4015-4018.
- N. Li, C. Chen, H. J. Hu, J. Jin, W. Y. Wen, and L. Yin, “Accurately Determining the Parameters of a Magnet Coil by 3D CAD Design”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD019, pp. 3539-3541.
- V. Tioukine, K. Aulenbacher, H. Euteneuer, K.-H. Kaiser, and S. Ratschow, “Spin Manipulation at MAMI - C”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPDO022, pp. 1816-1818.
- K. Pepitone, S. Doebert, B. Cadilhon, B. Cassany, and J. Gardelle, “LEETCHI: The High Current Electron Source for the CLIC Drive Beam Injector”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 870-872.
- M. Meddahi and W. Herr, “Aperture and Stability Studies for the CNGS Proton Beam Line”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT010, pp. 1150-1152.
- T. Adachi and I. Sakai, “Estimation of the Particle Density in Transverse Phase Space Using a Multi-Wire Profile Monitor”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP25F, pp. 1479-1481.
Back to search