Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] H. Wiedemann et al., “The 3 GeV Synchrotron Injector for SPEAR”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2688-2691.
[n] Q. Gao, H. B. Chen, J. Shi, W. Gai, and C.-J. Jing, “Beam Position Monitor Design for Dielectric Wakefield Accelerator In THz Range”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 171-174. doi:10.18429/JACoW-IPAC2016-MOPMB037
[n] S. Rauch, R. Baer, W. Panschow, and M. Thieme, “Performance Tests of the Standard FAIR Equipment Controller Prototype”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMN018, pp. 919-921.
[n] S. M. Gerbick, M. P. Kelly, and J. D. Fuerst, “A New Electropolishing System at ANL for Superconducting Quarter-Wave Resonators”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP36, pp. XX-XX.
[n] H. Deitinghoff et al., “Design Study of High-Energy, High-Current RF Accelerators for Ion Implantation”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1468-1471.
[n] E. Laface, C. Santoni, W. Scandale, and E. Y. Wildner, “Investigations on a Q0 Doublet Optics for the LHC Luminosity Upgrade”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC021, pp. 3023-3025.
[n] C. H. Haquin et al., “Spiral2 Control Command: a Standardized Interface between High Level Applications and EPICS IOCs”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMN005, pp. 879-881.
[n] J. J. Beebe-Wang, J. D. Galambos, J. A. Holmes, Y. Y. Lee, A. Luccio, and D. K. Olsen, “Status of the SNS Injection System”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP49C, pp. 341-343.
[n] G. Wang et al., “On-resonance round beam experiment in the HLS-II storage ring”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1079-1081. doi:10.18429/JACoW-IPAC2023-MOPM039
[n] B. Deriy, L. Emery, A. L. Hillman, G. S. Sprau, and J. Wang, “Pulsed Magnet Power Supplies for Improved Beam Trajectory Stability at the APS”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS136, pp. 2697-2699.
[n] J-P. Airiau, V. Denis, P. Fourtillan, C. Lacombe, and S. Vermersch, “SCIBORG: Analyzing and Monitoring LMJ Facility Health and Performance Indicators”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1604. doi:10.18429/JACoW-ICALEPCS2019-THCPL04
[n] Y.-C. Lin et al., “Dose rate and accumulated dose around the Taiwan Photon Source in various scenarios”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4077-4080. doi:10.18429/JACoW-IPAC2023-THPA053
[n] I. Pogorelsky et al., “Laser Energy Conversion to Solitons and Monoenergetic Protons in Near-critical Hydrogen Plasma”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD072, pp. 4446-4448.
[n] R. C. Webber et al., “FNAL HINS Beam Measurements and the Future of High Intensity Linac Instrumentation”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper THP001, pp. 755-757.
[n] K. W. Shepard, Z. A. Conway, J. D. Fuerst, M. Kedzie, and M. P. Kelly, “Prototype Superconducting Triple-Spoke Cavity for Beta = 0.63”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT099, pp. 4338-4340.
[n] H. de Oliveira Caiafa Duarte, A. Andersson, D. Olsson, K. Åhnberg, M. Al-Najdawi, and P. Tavares, “HOM dampers design for the MAX IV 100 MHz RF cavities”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2958-2961. doi:10.18429/JACoW-IPAC2023-WEPA126
[n] M. A. Allen, L. G. Karvonen, J.-L. Pellegrin, and P. B. Wilson, “RF System for the PEP Storage Ring”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1780-1783.
[n] J. Sebek, R. Hettel, R. Matheson, R. Ortiz, and J. Wachter, “SSRL Beam Position Monitor Detection Electronics”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1554-1557.
[n] N. Baboi et al., “Commissioning of the Electronics for HOM-based Beam Diagnostics at the 3.9 GHz Accelerating Module at FLASH”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper TUPF06, pp. 311-314.
[n] N. Tsoupas, H. Enge, and E. Forest, “Calculation of Aberration Coefficients up to Sixth Order of Multipole Focusing Elements”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-52, pp. 442-444.
[n] A. Drago et al., “Commissioning of the BESSY-II Longitudinal Feedback System”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP3A06, pp. 1903-1905.
[n] C. Ozkan Loch, M. Gregorio, R. Ischebeck, N. Samadi, and J. Vila Comamala, “Beam size measurement developments at SLS”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4814-4816. doi:10.18429/JACoW-IPAC2023-THPL148
[n] U. Pudasaini, M. J. Kelley, G. V. Eremeev, C. E. Reece, and J. Tuggle, “Post-Processing of Nb3Sn Coated Nb”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1190-1193. doi:10.18429/JACoW-IPAC2017-MOPVA144
[n] P. Alvarez, M. Cattin, J. H. Lewis, J. Serrano, and T. Wlostowski, “FPGA Mezzanine Cards for CERN's Accelerator Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEB002, pp. 376-378.
[n] R. Lehe, G. Lambert, A. Lifschitz, V. Malka, J.-M. Rax, and X. Davoine, “Numerical Study of an FEL based on LWFA Electrons and a Laser-plasma Wiggler”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper THPD48, pp. 642-645.
[n] S. Appel and O. Boine-Frankenheim, “Optimization of Multi-turn Injection into a Heavy-Ion Synchrotron using Genetic Algorithms”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3689-3692. doi:10.18429/JACoW-IPAC2015-THPF007
[n] S. J. Payne, “Strip Line Monitor design for the ISIS Proton Synchrotron using the FEA program HFSS”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPC28, pp. 435-437.
[n] A. Lumpkin et al., “Initial Diagnostics Commissioning Results for the Advanced Photon Source (APS)”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ10, pp. 2473-2475.
[n] S. Karsch, “Science and Techniques of Ultra-Fast Electron and Photon Sources”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR3RBI02, pp. 4290-4290.
[n] Y. W. An, H. F. Ji, and S. Wang, “Study of the Beam Injection and Extraction of the Proton Irradiation Accelerator”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI030, pp. 348-350.
[n] B. Deriy, A. L. Hillman, G. S. Sprau, and J. Wang, “The APS Septum Magnet Power Supplies Upgrade”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE069, pp. 3795-3797.
For LaTeX
Use Complete Form
For BibTeX
References
- H. Wiedemann et al., “The 3 GeV Synchrotron Injector for SPEAR”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2688-2691.
- Q. Gao, H. B. Chen, J. Shi, W. Gai, and C.-J. Jing, “Beam Position Monitor Design for Dielectric Wakefield Accelerator In THz Range”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 171-174.
- S. Rauch, R. Baer, W. Panschow, and M. Thieme, “Performance Tests of the Standard FAIR Equipment Controller Prototype”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMN018, pp. 919-921.
- S. M. Gerbick, M. P. Kelly, and J. D. Fuerst, “A New Electropolishing System at ANL for Superconducting Quarter-Wave Resonators”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TUP36, pp. XX-XX.
- H. Deitinghoff et al., “Design Study of High-Energy, High-Current RF Accelerators for Ion Implantation”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1468-1471.
- E. Laface, C. Santoni, W. Scandale, and E. Y. Wildner, “Investigations on a Q0 Doublet Optics for the LHC Luminosity Upgrade”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC021, pp. 3023-3025.
- C. H. Haquin et al., “Spiral2 Control Command: a Standardized Interface between High Level Applications and EPICS IOCs”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMN005, pp. 879-881.
- J. J. Beebe-Wang, J. D. Galambos, J. A. Holmes, Y. Y. Lee, A. Luccio, and D. K. Olsen, “Status of the SNS Injection System”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP49C, pp. 341-343.
- G. Wang et al., “On-resonance round beam experiment in the HLS-II storage ring”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM039, pp. 1079-1081.
- B. Deriy, L. Emery, A. L. Hillman, G. S. Sprau, and J. Wang, “Pulsed Magnet Power Supplies for Improved Beam Trajectory Stability at the APS”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS136, pp. 2697-2699.
- J-P. Airiau, V. Denis, P. Fourtillan, C. Lacombe, and S. Vermersch, “SCIBORG: Analyzing and Monitoring LMJ Facility Health and Performance Indicators”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1604.
- Y.-C. Lin et al., “Dose rate and accumulated dose around the Taiwan Photon Source in various scenarios”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA053, pp. 4077-4080.
- I. Pogorelsky et al., “Laser Energy Conversion to Solitons and Monoenergetic Protons in Near-critical Hydrogen Plasma”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD072, pp. 4446-4448.
- R. C. Webber et al., “FNAL HINS Beam Measurements and the Future of High Intensity Linac Instrumentation”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper THP001, pp. 755-757.
- K. W. Shepard, Z. A. Conway, J. D. Fuerst, M. Kedzie, and M. P. Kelly, “Prototype Superconducting Triple-Spoke Cavity for Beta = 0.63”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPT099, pp. 4338-4340.
- H. de Oliveira Caiafa Duarte, A. Andersson, D. Olsson, K. Åhnberg, M. Al-Najdawi, and P. Tavares, “HOM dampers design for the MAX IV 100 MHz RF cavities”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA126, pp. 2958-2961.
- M. A. Allen, L. G. Karvonen, J.-L. Pellegrin, and P. B. Wilson, “RF System for the PEP Storage Ring”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1780-1783.
- J. Sebek, R. Hettel, R. Matheson, R. Ortiz, and J. Wachter, “SSRL Beam Position Monitor Detection Electronics”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1554-1557.
- N. Baboi et al., “Commissioning of the Electronics for HOM-based Beam Diagnostics at the 3.9 GHz Accelerating Module at FLASH”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper TUPF06, pp. 311-314.
- N. Tsoupas, H. Enge, and E. Forest, “Calculation of Aberration Coefficients up to Sixth Order of Multipole Focusing Elements”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-52, pp. 442-444.
- A. Drago et al., “Commissioning of the BESSY-II Longitudinal Feedback System”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP3A06, pp. 1903-1905.
- C. Ozkan Loch, M. Gregorio, R. Ischebeck, N. Samadi, and J. Vila Comamala, “Beam size measurement developments at SLS”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL148, pp. 4814-4816.
- U. Pudasaini, M. J. Kelley, G. V. Eremeev, C. E. Reece, and J. Tuggle, “Post-Processing of Nb3Sn Coated Nb”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1190-1193.
- P. Alvarez, M. Cattin, J. H. Lewis, J. Serrano, and T. Wlostowski, “FPGA Mezzanine Cards for CERN's Accelerator Control System”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEB002, pp. 376-378.
- R. Lehe, G. Lambert, A. Lifschitz, V. Malka, J.-M. Rax, and X. Davoine, “Numerical Study of an FEL based on LWFA Electrons and a Laser-plasma Wiggler”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper THPD48, pp. 642-645.
- S. Appel and O. Boine-Frankenheim, “Optimization of Multi-turn Injection into a Heavy-Ion Synchrotron using Genetic Algorithms”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3689-3692.
- S. J. Payne, “Strip Line Monitor design for the ISIS Proton Synchrotron using the FEA program HFSS”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPC28, pp. 435-437.
- A. Lumpkin et al., “Initial Diagnostics Commissioning Results for the Advanced Photon Source (APS)”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ10, pp. 2473-2475.
- S. Karsch, “Science and Techniques of Ultra-Fast Electron and Photon Sources”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR3RBI02, pp. 4290-4290.
- Y. W. An, H. F. Ji, and S. Wang, “Study of the Beam Injection and Extraction of the Proton Irradiation Accelerator”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPFI030, pp. 348-350.
- B. Deriy, A. L. Hillman, G. S. Sprau, and J. Wang, “The APS Septum Magnet Power Supplies Upgrade”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE069, pp. 3795-3797.
Back to search