Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. A. Harrison et al., “Further Analysis of Corrugated Plate Dechirper Experiment at BNL-ATF”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP034, pp. 788-789.
[n] N. Ueda et al., “An RFQ Linac for Heavy Ion Acceleration”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper H14, pp. 299-301.
[n] L. Tosi, C. Knapic, and D. Zangrando, “The ELETTRA Superconducting Wiggler”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF039, pp. 390-392.
[n] M. Nomura et al., “Impedance Measurements of MA Loaded RF Cavities in J-PARC Synchrotrons”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP002, pp. 1985-1987.
[n] J. Arje et al., “Development of RIKEN 18 GHz ECRIS”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP016L, pp. 1478-1480.
[n] Y. Thurel, B. Favre, and D. Nisbet, “Four Quadrant 120 A, 10 V Power Converters for LHC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN082, pp. 347-349.
[n] A. Lombardi et al., “Helium Gas Evacuation in Superconducting RFQ Structure”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA107, pp. 1324-1326.
[n] A. Pazos, P. Duval, S. Fiedler, and U. R. Ristau, “An Embedded Distributed System Based on TINE and Windows CE”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper WEX04, pp. 148-150.
[n] T. Kramer, B. Goddard, M. Gyr, A. Koschik, J. A. Uythoven, and Th. Weiler, “Apertures in the LHC Beam Dump System and Beam Losses during Beam Abort”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP064, pp. 2665-2667.
[n] L. Serafini, S. Gustafsson, and C. Pagani, “Electromagnetic Calculations for an Improved Design of the Milan K800 Cyclotron RF Cavities”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I2-10, pp. 365-369.
[n] A. Gallo et al., “Proposal of a Strong RF Focusing Experiment at DAFNE”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT057, pp. 683-685.
[n] R. R. Lindberg, K.-J. Kim, Y. Cai, Y. Ding, and Z. Huang, “Transverse Gradient Undulators for a Storage Ring X-ray FEL Oscillator”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper THOBNO02, pp. 740-748.
[n] S. Bai et al., “Beam Waist Manipulations at the ATF2 Interaction Point”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP024, pp. 3747-3749.
[n] Y. Watanabe et al., “RIKEN Ring Cyclotron (RRC)”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper MOPA09, pp. 54-57.
[n] G. Y. Hsiung et al., “Operation Experiences for the 1.5 GeV TLS Ultra-High Vacuum System”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16037, pp. XX-XX.
[n] R. L. Madrak and D. Wildman, “Design and High Power Testing of 52.809 MHz RF Cavities for Slip Stacking in the Fermilab Recycler”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPMA13, pp. 1010-1012.
[n] F. Banfi et al., “Monte Carlo Transverse Emittance Study on Cs2Te”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THPP046, pp. XX-XX.
[n] P. Chen, M. Lundquist, and D. Yu, “Experiments on Voltage Droop Compensation for High Power Marx Modulators”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP130, pp. 1076-1078.
[n] R. Baer and F. Ameil, “Managing the FAIR Control System Development”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper TCO201, pp. 135-137.
[n] A. Young, “Low Phase-Noise, Low Jitter Master Oscillator for the LCLS Cavity BPM System”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP097, pp. 4180-4182.
[n] K. Thomsen, “Visual Monitor for Near-Target Beam Diagnostics”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP015, pp. 3982-3983.
[n] S. Jenzer et al., “Study of the Suitability of 3D Printing for Ultra-High Vacuum Applications”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3356-3358. doi:10.18429/JACoW-IPAC2017-WEPVA043
[n] M. Misiowiec, W. Buczak, and M. Buttner, “Towards High Performance Processing in Modern Java Based Control Systems”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper FRBHMUST02, pp. 1322-1325.
[n] J. A. Clarke et al., “Optimization of Superconducting Undulators for Low Repetition Rate FELs”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 411-414. doi:10.18429/JACoW-FEL2017-WEC02
[n] G. Andonian, S. Reiche, and M. Ruelas, “A User-Friendly Code to Model Radiation of High Brightness Beams”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP066, pp. 4464-4466.
For LaTeX
Use Complete Form
For BibTeX
References
- M. A. Harrison et al., “Further Analysis of Corrugated Plate Dechirper Experiment at BNL-ATF”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THP034, pp. 788-789.
- N. Ueda et al., “An RFQ Linac for Heavy Ion Acceleration”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper H14, pp. 299-301.
- L. Tosi, C. Knapic, and D. Zangrando, “The ELETTRA Superconducting Wiggler”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF039, pp. 390-392.
- M. Nomura et al., “Impedance Measurements of MA Loaded RF Cavities in J-PARC Synchrotrons”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP002, pp. 1985-1987.
- J. Arje et al., “Development of RIKEN 18 GHz ECRIS”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP016L, pp. 1478-1480.
- Y. Thurel, B. Favre, and D. Nisbet, “Four Quadrant 120 A, 10 V Power Converters for LHC”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN082, pp. 347-349.
- A. Lombardi et al., “Helium Gas Evacuation in Superconducting RFQ Structure”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA107, pp. 1324-1326.
- A. Pazos, P. Duval, S. Fiedler, and U. R. Ristau, “An Embedded Distributed System Based on TINE and Windows CE”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper WEX04, pp. 148-150.
- T. Kramer, B. Goddard, M. Gyr, A. Koschik, J. A. Uythoven, and Th. Weiler, “Apertures in the LHC Beam Dump System and Beam Losses during Beam Abort”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP064, pp. 2665-2667.
- L. Serafini, S. Gustafsson, and C. Pagani, “Electromagnetic Calculations for an Improved Design of the Milan K800 Cyclotron RF Cavities”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I2-10, pp. 365-369.
- A. Gallo et al., “Proposal of a Strong RF Focusing Experiment at DAFNE”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT057, pp. 683-685.
- R. R. Lindberg, K.-J. Kim, Y. Cai, Y. Ding, and Z. Huang, “Transverse Gradient Undulators for a Storage Ring X-ray FEL Oscillator”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper THOBNO02, pp. 740-748.
- S. Bai et al., “Beam Waist Manipulations at the ATF2 Interaction Point”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6PFP024, pp. 3747-3749.
- Y. Watanabe et al., “RIKEN Ring Cyclotron (RRC)”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper MOPA09, pp. 54-57.
- G. Y. Hsiung et al., “Operation Experiences for the 1.5 GeV TLS Ultra-High Vacuum System”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THP16037, pp. XX-XX.
- R. L. Madrak and D. Wildman, “Design and High Power Testing of 52.809 MHz RF Cavities for Slip Stacking in the Fermilab Recycler”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPMA13, pp. 1010-1012.
- F. Banfi et al., “Monte Carlo Transverse Emittance Study on Cs2Te”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper THPP046, pp. XX-XX.
- P. Chen, M. Lundquist, and D. Yu, “Experiments on Voltage Droop Compensation for High Power Marx Modulators”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP130, pp. 1076-1078.
- R. Baer and F. Ameil, “Managing the FAIR Control System Development”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper TCO201, pp. 135-137.
- A. Young, “Low Phase-Noise, Low Jitter Master Oscillator for the LCLS Cavity BPM System”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP097, pp. 4180-4182.
- K. Thomsen, “Visual Monitor for Near-Target Beam Diagnostics”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP015, pp. 3982-3983.
- S. Jenzer et al., “Study of the Suitability of 3D Printing for Ultra-High Vacuum Applications”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3356-3358.
- M. Misiowiec, W. Buczak, and M. Buttner, “Towards High Performance Processing in Modern Java Based Control Systems”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper FRBHMUST02, pp. 1322-1325.
- J. A. Clarke et al., “Optimization of Superconducting Undulators for Low Repetition Rate FELs”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 411-414.
- G. Andonian, S. Reiche, and M. Ruelas, “A User-Friendly Code to Model Radiation of High Brightness Beams”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5PFP066, pp. 4464-4466.
Back to search