JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	W. Xu et al., “RF and Mechanical Design of 647 MHz 5-Cell BNL4 Cavity for eRHIC ERL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2364-2366. doi:10.18429/JACoW-IPAC2016-WEPMR041
[n]	H. Takeda, J. H. Billen, and T. Bhatia, “Beam Dynamics Simulation of the Spallation Neutron Source Linear Accelerator”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4045, pp. 499-501. 
[n]	H. Danared, A. Kaellberg, L. Liljeby, and K.-G. Rensfelt, “The CRYRING Superconducting Electron Cooler”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP25F, pp. 1031-1033. 
[n]	P. A. P. Nghiem, N. Chauvin, D. Uriot, and W. Simeoni, “Advanced Considerations for Designing Very High-intensity Linacs through Novel Methods of Beam Analysis, Optimization, Measurement & Characterisation”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWA004, pp. 1727-1729. 
[n]	M. G. Giacchini et al., “Hyperarchiver: An Epics Archiver Prototype Based on Hypertable”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKN012, pp. 114-116. 
[n]	K. Saito et al., “Discovery of the Needless of Outgas Annealing after Horizontally Continuously Rotated Electropolishing with Niobium Superconducting RF Cavities”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper TUP032, pp. 283-287. 
[n]	K. Hanahoe et al., “Plasma Wakefield Acceleration at CLARA PARS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1544-1546. doi:10.18429/JACoW-IPAC2014-TUPME081
[n]	W. Simeoni, N. Chauvin, P. A. P. Nghiem, and D. Uriot, “High Intensity Beam Analysis for the Superconducting Radio-frequency Linac (SRF-Linac) of the IFMIF-EVEDA Accelerators”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC065, pp. 1323-1325. 
[n]	B. D. O, A. Fukasawa, B. Hidding, J. B. Rosenzweig, S. Tochitsky, and D. L. Bruhwiler, “Double Resosnant Plasma Wakefields”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPZ034, pp. 2838-2840. 
[n]	Y. Iwashita et al., “Measurement of Thin Film Coating on Superconductors”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1043-1045. doi:10.18429/JACoW-IPAC2017-MOPVA076
[n]	J. Osterhoff and S. Gessner, “The 10 TeV Wakefield Collider Design Study”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper TUP096, unpublished. 
[n]	G.-T. Park, K.-J. Kim, and R. R. Lindberg, “The Effects of Mirror Surface Error on Coherent X-Ray Propagation in XFELO Cavity”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP175, pp. 2441-2443. 
[n]	J. P. H. Sladen et al., “Automatic Conditioning of the CTF3 RF System”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH144, pp. 1355-1357. 
[n]	M. Shimada and K. Yokoya, “Proposal of Z pole electron-positron ERL colliders”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPM056, unpublished. 
[n]	Y. Honda et al., “Estimation of Alignment Error by Measuring Higher-order-mode of Injector Superconducting Cavity at KEK-cERL”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 286-288. doi:10.18429/JACoW-SRF2017-MOPB096
[n]	A. Cucchetti and L. M. Young, “Design of a 10-MeV Photoinjector Accelerator for ELFA”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH424, pp. 650-652. 
[n]	L. K. Mestha, C. M. Kwan, R. C. Webber, and K. S. Yeung, “A General Control Model for Designing Beam Control Feedback Loops”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1076-1079. 
[n]	A. Rauchas and R. Zolecki, “Injected Beam Chopper System for the Intense Pulsed Neutron Source Accelerator System”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2947-2950. 
[n]	A. Arteche et al., “First Beam Tests at the CERN SPS of an Electro-Optic Beam Position Monitor for the HL-LHC”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 270-273. doi:10.18429/JACoW-IBIC2017-TUPCF23
[n]	H. Sakai et al., “Improvement of a Clean Assembly Work for Superconducting RF Cryomodule and Its Application to the KEK-STF Cryomodule”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 721-725. doi:10.18429/JACoW-SRF2019-TUP104
[n]	P. Heikkinen, “New Mcc30/15 Cyclotron For The Jyfl Accelerator Laboratory”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 128-130. 
[n]	A. Narayanan, “Third integer resonant extraction transit time simulation studies”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 604-607. doi:10.18429/JACoW-NAPAC2025-TUP098
[n]	L. Lari et al., “Neutrons and Photons Fluences in the DTL Section of the ESS Linac”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 703-706. doi:10.18429/JACoW-NAPAC2016-WEPOA07
[n]	P. A. P. Nghiem, N. Chauvin, D. Uriot, M. Comunian, and C. Oliver, “Catalogue of Losses for the IFMIF Prototype Accelerator”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR019, pp. 2982-2984. 
[n]	D. El Khechen, K. Oide, and F. Zimmermann, “Beam-Beam Blowup Issue After Low Emittance Tuning for FCC-ee”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 112-115. doi:10.18429/JACoW-IPAC2019-MOPGW019
[n]	P. Heikkinen, “STATUS AND THE FUTURE PLANS OF THE JYV?äSKYL?ä K130 CYCLOTRON”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 18C6, pp. XX-XX. 
[n]	T. Miyajima et al., “Beam Dynamics Simulation for the Compact ERL Injector”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP067, pp. 521-523. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search