Favourites
For Word
[n] J. Bosser et al., “Single Bunch Profile Measurement Using Synchrotron Light from an Undulator”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2164-2167.
[n] K. Brodzinski, B. Bradu, S. D. Claudet, D. Delikaris, L. P. Delprat, and G. Ferlin, “Adaptation of the Cryogenic System Capacity for the LHC Dynamic Heat Load - Operational Experience”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2541-2544. doi:10.18429/JACoW-IPAC2018-WEPMF073
[n] N. A. Ebrahim, “Review of Current Research in Laser and Plasma-Based Acceleration”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper FR1-01, pp. 825-829.
[n] Y. Matsubara et al., “Development on Superconducting Cavities at SHI”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97A27, pp. 248-253.
[n] K. Kittimanapun, Ch. Dhammatong, N. Juntong, W. Phacheerak, and M. Phanak, “Development of a Pre-Injector Test Bench for Future SLRI Light Source”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4499-4501. doi:10.18429/JACoW-IPAC2018-THPMK085
[n] H. Hahn, “Matrix Solution of Coupling Impedance in Multi-Layer Circular Cylindrical Structures”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5PFP082, pp. 3395-3397.
[n] D. Huang et al., “RF Studies at Fermilab MuCool Test Area”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP032, pp. 888-890.
[n] V. Fusco and M. Ferrario, “Beam Dynamics Study of a C-Band Linac Driven FEL with S-Band Photo-Injector”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5PFP066, pp. 3355-3357.
[n] F. Formenti et al., “Upgrade of the Quench Protection Systems for the Superconducting Circuits of the LHC Machine at CERN: From Concept and Design to the First Operational Experience”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD013, pp. 696-698.
[n] T. Chanwattana, R. Bartolini, and A. Seryi, “Studies on LPWA-based Light Sources driven by a Transverse Gradient Undulator”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2937-2939. doi:10.18429/JACoW-IPAC2014-THPRO032
[n] R. Calaga et al., “Transverse Impedance Localization Using Dependent Optics”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5RFP034, pp. 4604-4606.
[n] O. Groebner, “Control System for Turbomolecular Pumping Stations and Sector Valves of the CERN Intersecting Storage Rings”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 709-711.
[n] A. Xiao and L. Emery, “International Linear Collider Damping Ring Lattice Design”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN097, pp. 3450-3452.
[n] W. L. Liu, P. T. Cong, Z. M. Wang, H. Jiang, and S. X. Zheng, “An Optimization Method of the Nose-cone Buncher Cavity”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 778-780. doi:10.18429/JACoW-LINAC2018-THPO042
[n] J. Wang et al., “Simulation of the Trajectory of Electrons in a Magnetron Sputtering System of TiN with CST Particle Studio”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2341-2343. doi:10.18429/JACoW-IPAC2014-WEPME036
[n] T. Schultheiss, J. Rathke, V. Ravindranath, J. Rose, and S. K. Sharma, “CESR-type SRF Cavity - Meeting the ASME Pressure Vessel Criteria by Analysis”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP271, pp. 1328-1330.
[n] L. Xiao, C.-K. Ng, J. E. Dey, I. Kourbanis, and Z. Qian, “Simulation and Optimization of Project-X Main Injector Cavity”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP187, pp. 1840-1842.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Bosser et al., “Single Bunch Profile Measurement Using Synchrotron Light from an Undulator”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2164-2167.
- K. Brodzinski, B. Bradu, S. D. Claudet, D. Delikaris, L. P. Delprat, and G. Ferlin, “Adaptation of the Cryogenic System Capacity for the LHC Dynamic Heat Load - Operational Experience”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2541-2544.
- N. A. Ebrahim, “Review of Current Research in Laser and Plasma-Based Acceleration”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper FR1-01, pp. 825-829.
- Y. Matsubara et al., “Development on Superconducting Cavities at SHI”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97A27, pp. 248-253.
- K. Kittimanapun, Ch. Dhammatong, N. Juntong, W. Phacheerak, and M. Phanak, “Development of a Pre-Injector Test Bench for Future SLRI Light Source”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4499-4501.
- H. Hahn, “Matrix Solution of Coupling Impedance in Multi-Layer Circular Cylindrical Structures”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5PFP082, pp. 3395-3397.
- D. Huang et al., “RF Studies at Fermilab MuCool Test Area”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP032, pp. 888-890.
- V. Fusco and M. Ferrario, “Beam Dynamics Study of a C-Band Linac Driven FEL with S-Band Photo-Injector”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5PFP066, pp. 3355-3357.
- F. Formenti et al., “Upgrade of the Quench Protection Systems for the Superconducting Circuits of the LHC Machine at CERN: From Concept and Design to the First Operational Experience”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD013, pp. 696-698.
- T. Chanwattana, R. Bartolini, and A. Seryi, “Studies on LPWA-based Light Sources driven by a Transverse Gradient Undulator”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2937-2939.
- R. Calaga et al., “Transverse Impedance Localization Using Dependent Optics”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5RFP034, pp. 4604-4606.
- O. Groebner, “Control System for Turbomolecular Pumping Stations and Sector Valves of the CERN Intersecting Storage Rings”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 709-711.
- A. Xiao and L. Emery, “International Linear Collider Damping Ring Lattice Design”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN097, pp. 3450-3452.
- W. L. Liu, P. T. Cong, Z. M. Wang, H. Jiang, and S. X. Zheng, “An Optimization Method of the Nose-cone Buncher Cavity”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 778-780.
- J. Wang et al., “Simulation of the Trajectory of Electrons in a Magnetron Sputtering System of TiN with CST Particle Studio”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2341-2343.
- T. Schultheiss, J. Rathke, V. Ravindranath, J. Rose, and S. K. Sharma, “CESR-type SRF Cavity - Meeting the ASME Pressure Vessel Criteria by Analysis”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP271, pp. 1328-1330.
- L. Xiao, C.-K. Ng, J. E. Dey, I. Kourbanis, and Z. Qian, “Simulation and Optimization of Project-X Main Injector Cavity”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP187, pp. 1840-1842.
Back to search