Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. Bira, L. Ferreira, G. Rosaz, and A.-M. Valente-Feliciano, “Characterization and modeling of electropolishing for copper cavities in superconducting applications”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPB074, unpublished.
[n] S.-K. Lee, B. H. Choi, K. R. Kim, HR. Lee, and B.-S. Park, “Characteristic Experimentations of Degrader and Scatterer at MC-50 Cyclotron”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAP013, pp. 1356-1358.
[n] S. Kato, S. Azuma, M. Nishiwaki, P. V. Tyagi, and F. Yamamoto, “Application of Electrochemical Buffing onto Niobium SRF Cavity Surface”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC018, pp. 2929-2931.
[n] A. A. Garren, E. L. Molishever, J. M. Peterson, and R. C. Sah, “A Superconducting Proton Storage Ring for PEP”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3261-3264.
[n] CH. Yu, W.-H. Huang, X. Shen, and C.-X. Tang, “Optical Stochastic Cooling in a Low Energy Electron Storage Ring for a Compact X-Ray Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP034, pp. 4378-4380.
[n] P. Goudket et al., “Surface Resistance RF Measurements of Materials Used for Accelerator Vacuum Chambers”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3235-3238. doi:10.18429/JACoW-IPAC2015-WEPHA053
[n] A. V. Elzhov and E. A. Perelstein, “INFLUENCE OF PHASE SHIFT OF ACCOMPANYING WAVE ON ELECTRON DYNAMICS IN TWO-BEAM ACCELERATOR DRIVER”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THBP05, pp. XX-XX.
[n] B. Zipfel et al., “Experimental results on longitudinal RF beam phase feedback in the heavy-ion synchrotron SIS18”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3329-3332. doi:10.18429/JACoW-IPAC2024-THPG33
[n] P. Cheng, Z. Li, J. Y. Tang, and J. Q. Wang, “Simulation of Longitudinal Beam Instability caused by HOMs”, in Proc. HB'12, Beijing, China, Sep. 2012, paper MOP212, pp. 73-77.
[n] S. A. Averichev et al., “Progress in Manufactoring Main Nuclotron Extraction Elements”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP075G, pp. 2435-2437.
[n] P. V. Tyagi, M. Doleans, S.-H. Kim, R. Afanador, and C. J. McMahan, “Plasma Processing of Nb Surfaces for SRF Cavities”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP115, pp. 323-325.
[n] J. S. Eldred, M. Backfish, C.-Y. Tan, and R. M. Zwaska, “Electron Cloud Measurements in Fermilab Main Injector and Recycler”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 604-607. doi:10.18429/JACoW-IPAC2015-MOPMA027
[n] M. Sawabe, H. Hayano, S. Kato, M. Nishiwaki, T. Saeki, and P. V. Tyagi, “Long-period Monitoring of Electro-polishing Electrolyte in EP Facility at KEK”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC027, pp. 2947-2949.
[n] R. M. Reimers, R. C. Wolgast, and R. M. Yamamoto, “Magnet Coil System for a Superconducting Spectrometer (HISS)”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2911-2914.
[n] W. T. Kitka et al., “Control System of the ForMAX Beamline at the MAX IV Synchrotron”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1402-1405. doi:10.18429/JACoW-ICALEPCS2023-THPDP040
[n] D. A. Spence, B. F. Gavin, R. Peters, L. L. Reginato, B. H. Smith, and R. C. Wolgast, “A 3-MV Injsector for the Superhilac”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 97-102.
[n] M. L. Lopes et al., “Magnetic Design Constraints of Helical Solenoids”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2731-2733. doi:10.18429/JACoW-IPAC2014-WEPRI100
[n] E. Blanco Vinuela et al., “UNICOS Evolution: CPC Version 6”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKS006, pp. 786-789.
[n] V. N. Pavlenko et al., “Characterization of Femtosecond-Laser-Induced Electron Emission from Diamond Nano-Tips”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 228-231. doi:10.18429/JACoW-NAPAC2019-MOPLH25
[n] R. M. Main, M. R. Curtis, R. Grazier, P. B. Kennedy, and D. A. Spence, “A Small Helium-3 Cyclotron”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 733-740.
[n] A. J. May et al., “Commissioning of the UKRI STFC Daresbury Vertical Test Facility for Jacketed SRF Cavities”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 308. doi:10.18429/JACoW-SRF2021-MOPFAV002
[n] J. S. Lunsford, R. F. Bentley, and G. P. Lawrence, “Versatile H Beam Chopper System at LAMPF”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3433-3436.
[n] S. Wilde et al., “Physical Vapour Deposition of Thin Films for Use in Superconducting RF Cavities”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3249-3252. doi:10.18429/JACoW-IPAC2015-WEPHA059
[n] K. H. Gil, H. J. Choi, J. Y. Huang, J. H. Lim, and C. W. Bark, “Automation of Microbeam Focusing for X-Ray Micro-Experiments at the 4B Beamline of Pohang Light Source-II”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC058, pp. 703-706.
[n] A. L. Karuzskii, “Local Electric Field Microwave Electrodynamics of High -Tc Superconducting Metal Oxides”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97B10, pp. 362-365.
[n] C. Spies, M. Glesner, and H. Klingbeil, “Model-Based Analysis of Digital Signal Processing Blocks in a Beam Phase Control System”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper WEP13, pp. 164-166.
[n] J. Rochez, E. B. Blanco Vinuela, M. Koutli, and T. Petrou, “Opening the Floor to PLCs and IPCs: CODESYS in UNICOS”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC033, pp. 147-150.
[n] T. Elioff, R. J. Force, W. D. Hartsough, and K. H. Lou, “Bevatron External Proton Beam Facilities”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 172-174.
[n] J. J. Barale, K. C. Crebbin, J. W. Lax, R. M. Richter, and E. Zajec, “Secondary Emission Monitors at the Bevatron-Bevalac”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3412-3415.
[n] V. Yu. Zaslavsky et al., “Terahertz Band FEL with Advanced Bragg Reflectors”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC78, pp. 424-427.
[n] E. A. Perelstein, L. V. Bobyleva, A. V. Elzhov, and V. I. Kazacha, “Theoretical Study of Power Relativistic Amplifiers for Electron Beam Bunching”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8W020, pp. 488-490.
[n] A. Kiourkos, P. Golonka, M. Gonzalez-Berges, S. Infante, and J-C. Tournier, “Centralized Data Engineering for the Monitoring of the CERN Electrical Network”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC023, pp. 107-110.
[n] M. Ge et al., “Recent progress on HF-free surface treatment by bipolar pulsed electropolishing for SRF Nb cavities”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 790-792. doi:10.18429/JACoW-LINAC2024-THPB081
[n] M. P. Howell et al., “History of Cryomodule Repairs at SNS”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP109, pp. 1108-1110.
[n] J. S. Eldred and R. M. Zwaska, “Proposed Cavity for Reduced Slip-Stacking Loss”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 600-603. doi:10.18429/JACoW-IPAC2015-MOPMA026
[n] S. H. Kim et al., “Development and Management of the Modulator System for PLS-II 3.0 GeV Electron Linac”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD073, pp. 3683-3685.
[n] L. N. Drosdal et al., “Investigations of SPS Orbit Drifts”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 852-854. doi:10.18429/JACoW-IPAC2014-MOPRI100
[n] J-C. Tournier et al., “New Electrical Network Supervision for CERN: Simpler, Safer, Faster, and Including New Modern Features”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOCOBAB01, pp. 27-30.
[n] R. Arcidiacono et al., “CMS DCS Design Concepts”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_062.
[n] I. A. Shelaev et al., “General Design Features of the Four-Meter Isochronous Cyclotron at Dubna with a Smoothly Variable Heavy Ion Energy”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 332-335.
For LaTeX
Use Complete Form
For BibTeX
References
- S. Bira, L. Ferreira, G. Rosaz, and A.-M. Valente-Feliciano, “Characterization and modeling of electropolishing for copper cavities in superconducting applications”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPB074, unpublished.
- S.-K. Lee, B. H. Choi, K. R. Kim, HR. Lee, and B.-S. Park, “Characteristic Experimentations of Degrader and Scatterer at MC-50 Cyclotron”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAP013, pp. 1356-1358.
- S. Kato, S. Azuma, M. Nishiwaki, P. V. Tyagi, and F. Yamamoto, “Application of Electrochemical Buffing onto Niobium SRF Cavity Surface”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEC018, pp. 2929-2931.
- A. A. Garren, E. L. Molishever, J. M. Peterson, and R. C. Sah, “A Superconducting Proton Storage Ring for PEP”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3261-3264.
- CH. Yu, W.-H. Huang, X. Shen, and C.-X. Tang, “Optical Stochastic Cooling in a Low Energy Electron Storage Ring for a Compact X-Ray Source”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5PFP034, pp. 4378-4380.
- P. Goudket et al., “Surface Resistance RF Measurements of Materials Used for Accelerator Vacuum Chambers”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3235-3238.
- A. V. Elzhov and E. A. Perelstein, “INFLUENCE OF PHASE SHIFT OF ACCOMPANYING WAVE ON ELECTRON DYNAMICS IN TWO-BEAM ACCELERATOR DRIVER”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THBP05, pp. XX-XX.
- B. Zipfel et al., “Experimental results on longitudinal RF beam phase feedback in the heavy-ion synchrotron SIS18”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG33, pp. 3329-3332.
- P. Cheng, Z. Li, J. Y. Tang, and J. Q. Wang, “Simulation of Longitudinal Beam Instability caused by HOMs”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper MOP212, pp. 73-77.
- S. A. Averichev et al., “Progress in Manufactoring Main Nuclotron Extraction Elements”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP075G, pp. 2435-2437.
- P. V. Tyagi, M. Doleans, S.-H. Kim, R. Afanador, and C. J. McMahan, “Plasma Processing of Nb Surfaces for SRF Cavities”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP115, pp. 323-325.
- J. S. Eldred, M. Backfish, C.-Y. Tan, and R. M. Zwaska, “Electron Cloud Measurements in Fermilab Main Injector and Recycler”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 604-607.
- M. Sawabe, H. Hayano, S. Kato, M. Nishiwaki, T. Saeki, and P. V. Tyagi, “Long-period Monitoring of Electro-polishing Electrolyte in EP Facility at KEK”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEC027, pp. 2947-2949.
- R. M. Reimers, R. C. Wolgast, and R. M. Yamamoto, “Magnet Coil System for a Superconducting Spectrometer (HISS)”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2911-2914.
- W. T. Kitka et al., “Control System of the ForMAX Beamline at the MAX IV Synchrotron”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THPDP040, pp. 1402-1405.
- D. A. Spence, B. F. Gavin, R. Peters, L. L. Reginato, B. H. Smith, and R. C. Wolgast, “A 3-MV Injsector for the Superhilac”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 97-102.
- M. L. Lopes et al., “Magnetic Design Constraints of Helical Solenoids”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2731-2733.
- E. Blanco Vinuela et al., “UNICOS Evolution: CPC Version 6”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPKS006, pp. 786-789.
- V. N. Pavlenko et al., “Characterization of Femtosecond-Laser-Induced Electron Emission from Diamond Nano-Tips”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 228-231.
- R. M. Main, M. R. Curtis, R. Grazier, P. B. Kennedy, and D. A. Spence, “A Small Helium-3 Cyclotron”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 733-740.
- A. J. May et al., “Commissioning of the UKRI STFC Daresbury Vertical Test Facility for Jacketed SRF Cavities”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 308.
- J. S. Lunsford, R. F. Bentley, and G. P. Lawrence, “Versatile H Beam Chopper System at LAMPF”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3433-3436.
- S. Wilde et al., “Physical Vapour Deposition of Thin Films for Use in Superconducting RF Cavities”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3249-3252.
- K. H. Gil, H. J. Choi, J. Y. Huang, J. H. Lim, and C. W. Bark, “Automation of Microbeam Focusing for X-Ray Micro-Experiments at the 4B Beamline of Pohang Light Source-II”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC058, pp. 703-706.
- A. L. Karuzskii, “Local Electric Field Microwave Electrodynamics of High -Tc Superconducting Metal Oxides”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97B10, pp. 362-365.
- C. Spies, M. Glesner, and H. Klingbeil, “Model-Based Analysis of Digital Signal Processing Blocks in a Beam Phase Control System”, in Proc. 11th Int. Computational Accelerator Physics Conf. (ICAP'12), Rostock-Warnemunde, Germany, Aug. 2012, paper WEP13, pp. 164-166.
- J. Rochez, E. B. Blanco Vinuela, M. Koutli, and T. Petrou, “Opening the Floor to PLCs and IPCs: CODESYS in UNICOS”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC033, pp. 147-150.
- T. Elioff, R. J. Force, W. D. Hartsough, and K. H. Lou, “Bevatron External Proton Beam Facilities”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 172-174.
- J. J. Barale, K. C. Crebbin, J. W. Lax, R. M. Richter, and E. Zajec, “Secondary Emission Monitors at the Bevatron-Bevalac”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3412-3415.
- V. Yu. Zaslavsky et al., “Terahertz Band FEL with Advanced Bragg Reflectors”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUPC78, pp. 424-427.
- E. A. Perelstein, L. V. Bobyleva, A. V. Elzhov, and V. I. Kazacha, “Theoretical Study of Power Relativistic Amplifiers for Electron Beam Bunching”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8W020, pp. 488-490.
- A. Kiourkos, P. Golonka, M. Gonzalez-Berges, S. Infante, and J-C. Tournier, “Centralized Data Engineering for the Monitoring of the CERN Electrical Network”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC023, pp. 107-110.
- M. Ge et al., “Recent progress on HF-free surface treatment by bipolar pulsed electropolishing for SRF Nb cavities”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 790-792.
- M. P. Howell et al., “History of Cryomodule Repairs at SNS”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP109, pp. 1108-1110.
- J. S. Eldred and R. M. Zwaska, “Proposed Cavity for Reduced Slip-Stacking Loss”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 600-603.
- S. H. Kim et al., “Development and Management of the Modulator System for PLS-II 3.0 GeV Electron Linac”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD073, pp. 3683-3685.
- L. N. Drosdal et al., “Investigations of SPS Orbit Drifts”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 852-854.
- J-C. Tournier et al., “New Electrical Network Supervision for CERN: Simpler, Safer, Faster, and Including New Modern Features”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOCOBAB01, pp. 27-30.
- R. Arcidiacono et al., “CMS DCS Design Concepts”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P1_062.
- I. A. Shelaev et al., “General Design Features of the Four-Meter Isochronous Cyclotron at Dubna with a Smoothly Variable Heavy Ion Energy”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 332-335.
Back to search