Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] E. L. Garwin, W. B. Herrmannsfeldt, C. Sinclair, J. N. Weaver, J. J. Welch, and P. B. Wilson, “An Experimental Program to Build a Multimegawatt Lasertron for Super Linear Colliders”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2906-2909.
[n] K. Grigoryev et al., “Development of a combined element with an electric and magnetic fields for the JEDI experiment”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4406-4408. doi:10.18429/JACoW-IPAC2023-THPA189
[n] E. R. Rotela, A. Baricikowski, J. Biggs, and S. Sharma, “Mechanical Design of a Flexible Bunch Compressor for APS Linac”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH167, pp. 4041-4043.
[n] K. L. Jensen, D. W. Feldman, E. J. Montgomery, P. G. O, and J. J. Petillo, “Corrections to Quantum Efficiency Predictions for Low Work Function Electron Sources”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP204, pp. 2504-2506.
[n] J. D. Jarvis et al., “Toward Energy-Spread Measurements of Diamond Field-Emitter Arrays”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH034, pp. 317-319.
[n] J. T. M. Lyles et al., “Results from the Installation of a New 201 MHz RF System at LANSCE”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP107, pp. 303-306.
[n] W. Buczak, M. Buttner, F. Ehm, P. Jurcso, and M. Mitev, “DIAMON2 ÔÇô Improved Monitoring of CERN's Accelerator Controls Infrastructure”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THCOBA03, pp. 1415-1418.
[n] R. Maier and U. Hacker, “Beam Diagnostic for COSY-Juelich”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1574-1577.
[n] C. B?Âhme et al., “Status Overview of the HESR Beam Instrumentation”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 26-28. doi:10.18429/JACoW-IBIC2018-MOPA01
[n] A. A. Mondelli and D. P. Chernin, “Plasma-Focused Cyclic Accelerators”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3521-3524.
[n] S. Sampayan et al., “Beam-Target Interaction Experiments for Bremsstrahlung Convertor Applications”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA96, pp. 1303-1305.
[n] J. Chen et al., “Cryomodules development for SHINE project”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2788-2790. doi:10.18429/JACoW-IPAC2024-WEPS42
[n] M. Puglisi, “A Linear and Non Linear Analysis of High Power rf Amplifiers”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3411-3414.
[n] G. Gold and V. Sabaiduc, “Design of a Digital Low-Level RF System for BEST Medical Cyclotrons”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TUPPT024, pp. 203-205.
[n] M. Foss, W. Praeg, and K. Thompson, “A Transformer Septum Magnet”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4024-4027.
[n] M. Drury et al., “CEBAF Cryomodule Commissioning in the South Linac”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I07, pp. XX-XX.
[n] Y. Tsuzuki et al., “Polarimetry of Hard X-Rays from Highly Charged Ions Using a Si/CdTe Compton Camera”, presented at the EBIST2022, Whistler, BC, Canada, Jun. 2022, paper FR3WH01, unpublished.
[n] M. Yu, D. J. Harding, and G. Velev, “Dipole Corrector Magnets for the LBNE Beam Line”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP152, pp. 1115-1117.
[n] G. Thomas, K. Azarov, R. Barill?¿re, S. Cabaret, N. Kulman, and J. Rochez, “LHC GCS A framework for the production of 23 homogeneous control systems”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_042.
[n] J. D. Jarvis et al., “Fabrication of Self-Aligned-Gate Diamond Field-Emitter-Array Triodes for Free-Electron Lasers”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC60, pp. 376-378.
[n] G. Arnolds-Mayer, W.-D. Moeller, A. Matheisen, and D. Proch, “Industrial Production of Superconducting Accelerating Cavities for HERA”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 938-941.
[n] X. Geng, A. Groff, M. R. Pearson, and G. Taufer, “Motion Controls for ORNL Neutron Science Experimental Beamlines”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1261-1263. doi:10.18429/JACoW-ICALEPCS2023-THMBCMO29
[n] W. C. Barry, “Suppression of Propagating TE Modes in the FNAL Antiproton Source Stochastic Beam Cooling System”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2424-2427.
[n] B. Koubek, A. Schempp, J. S. Schmidt, and J. Haeuser, “RF Setup of the MedAustron RFQ”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB046, pp. 957-959.
[n] G. Sch??nemann et al., “An FPGA Based Data Acquisition System for a Fast Orbit Feedback at DELTA”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPD08, pp. 303-305.
[n] U. Bartz and A. Schempp, “A CW RFQ Prototype”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS034, pp. 2559-2561.
[n] V. Morozov, A. Hoover, D. Stratakis, F. Pilat, N. Evans, and S. Cousineau, “Proposed muon collider R&D at SNS”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2578-2581. doi:10.18429/JACoW-IPAC2024-WEPR39
[n] Z. D. Farkas, C. J. Kruse, G. A. Loew, and R. A. McConnell, “Design and Performance of the SLAC RF Drive System”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 223-229.
[n] E. I. Simakov et al., “Update on Fabrication and Tuning of the Photonic Band Gap Accelerating Structure for the Wakefield Experiment”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC25, pp. 120-122.
[n] J. J. Petillo, K. Jensen, B. Levush, and J. N. P. Panagos, “Detailed Photoemission Modeling Using the 3D Finite-Element PIC Code MICHELLE”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUODC01, pp. 904-904.
[n] I. Lobach, M. Borland, K. C. Harkay, N. Kuklev, A. Sannibale, and Y. Sun, “Machine Learning for Anomaly Detection and Classification in Particle Accelerators”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 311-314. doi:10.18429/JACoW-NAPAC2022-TUYE4
[n] D. O. Tavares et al., “Development of the Sirius RF BPM Electronics”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPC09, pp. 63-66.
[n] A. Lehrach et al., “Design Work for the High-Energy Storage Ring for Antiprotons of the Future GSI Project”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAE001, pp. 776-778.
[n] R. Borghes, V. Chenda, A. Gianoncelli, and G. Kourousias, “Evolving a LabVIEW End-Station Software to a TANGO-Based Solution at the TwinMic Elettra Beamline”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 948-952. doi:10.18429/JACoW-ICALEPCS2017-TUPHA208
[n] A. Canabal, J. D. Bowyer, P. Chacon, N. A. Gillespie, M. A. Madrid, and T. Tajima, “Development of a Temperature Mapping System for 1.3-GHz 9-Cell SRF Cavities”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS031, pp. 2406-2408.
[n] K.-H. Hsu, C.-K. Kuan, C.-S. Huang, H. Ho, and W.-Y. Lai, “Assembly process and inspection results for W100”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3788-3790. doi:10.18429/JACoW-IPAC2024-THPS24
[n] E. M. Bajon et al., “Commissioning of the New AGS MMPS Transformers”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP003, pp. 1538-1540.
[n] R. Lemons, A. Marinelli, C. Durfee, J. Hirschman, N. Neveu, and S. Carbajo, “Realizing high average power temporal laser shaping for photocathode emittance reduction”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPR73, unpublished.
[n] P. Catravas et al., “Beam Profile Measurement at 30 GeV using Optical Transition Radiation”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA100, pp. 2111-2113.
[n] C. Narug et al., “Successful cleanroom installation of PIP-II SSR2 coupler using robotic arm”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 168-170. doi:10.18429/JACoW-LINAC2024-MOPB056
[n] J. T. M. Lyles et al., “Design, Test and Implementation of New 201.25 MHz Power Amplifier for the LANSCE Linac”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC069, pp. 3446-3448.
[n] G. P. Jackson and R. H. Siemann, “Comparison Between the Simulated and Measured Luminosity Performance of CESR”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1011-1014.
[n] E. Cicek et al., “An advanced digital feedback control system design for the muon linear accelerator”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4194-4197. doi:10.18429/JACoW-IPAC2023-THPA100
[n] T. Watanabe, N. Fukunishi, O. Kamigaito, M. Kase, and Y. Sasaki, “Improvement of Beam Current Monitor with High Tc Current Sensor and SQUID at the RIBF”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC105, pp. 1260-1262.
[n] M. E. Read, G. Collins, P. Ferguson, L. R. Ives, R. H. Jackson, and D. Marsden, “10 MW, L-Band, Annular Beam Klystron for Accelerator Applications”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPHO09, pp. 948-950.
[n] J. T. M. Lyles et al., “A High Power Test Facility for New 201.25 MHz Power Amplifiers and Components”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC070, pp. 3449-3451.
[n] F. L. Krawczyk et al., “Design of a ?ƒ=0.175, 2-gap Spoke Resonator”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PT011, pp. XX-XX.
[n] G. Arnolds-Mayer, K. Jaeger, and R. Mayer, “Industrial Production of 8 Superconducting Accelerator Modules for HERA and 6 Superconducting Accelerating Cavities for DALINAC”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1070-1073.
[n] E. I. Simakov et al., “Experimental Study of Wakefields in an X-band Photonic Band Gap Accelerating Structure”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2689-2691. doi:10.18429/JACoW-IPAC2015-WEPJE008
[n] A. Meseck, G. P?Âplau, and U. van Rienen, “Numerical Studies on the Influence of Fill Patterns on Ion Clouds”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper WEP02, pp. 146-148.
[n] S. Casalbuoni et al., “Field Quality of 1.5 m Long Conduction Cooled Superconducting Undulator Coils with 20 mm Period Length”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1395-1398. doi:10.18429/JACoW-IPAC2017-TUPAB035
[n] A. Kiourkos, S. Infante, and K. S. Seintaridis, “Energy Consumption Monitoring With Graph Databases and Service Oriented Architecture”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 720. doi:10.18429/JACoW-ICALEPCS2019-TUBPL06
[n] W. Qin and I. Zagorodnov, “General method of short-range wakefield calculation for corrugated structures of arbitrary shape”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3405-3408. doi:10.18429/JACoW-IPAC2023-WEPL125
[n] M. P. Sangroula, R. M. Lill, R. R. Lindberg, and X. Sun, “Impedance Measurement of Vacuum Chamber Components for the Advance Photon Source (APS) Upgrade”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3583-3586. doi:10.18429/JACoW-IPAC2017-WEPVA134
[n] N. S. Ginzburg, K. E. Dorfman, A. Malkin, and R. M. Rozental, “A FEL Amplifier Based on Planar Bragg Waveguides”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper TUPPH033, pp. 393-396.
[n] C. Cuevas et al., “The Upgrade Path from Legacy VME to VXS Dual Star Connectivity for Large Scale Data Acquisition and Trigger Systems”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper TUBAULT03, pp. 550-553.
[n] J. R. Towler et al., “Technologies and R&D for a High Resolution Cavity BPM for the CLIC Main Beam”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPC20, pp. 415-418.
[n] V. Wu, A. Z. Chen, Z. Qian, and D. Wildman, “Design of a New Main Injector Cavity for the Fermilab Proton Driver Era”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT028, pp. 2015-2017.
[n] T. Lamb et al., “Development of an Alternative, Photodiode-Based, Femtosecond Stable Detection Principle for the Link Stabilization in the Optical Synchronization Systems at FLASH and XFEL”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD35, pp. 380-382.
[n] R. Borghes et al., “A Common Software Framework for FEL Data Acquisition and Experiment Management at FERMI”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper FRCOAAB06, pp. 1481-1484.
[n] G. O. Bolme, G. P. Boicourt, K. F. Johnson, R. A. Lohsen, O. R. Sander, and L. S. Walling, “Measurement of RF Accelerator Cavity Field Levels at High Power from X-Ray Emissions”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO461, pp. 219-222.
[n] Z. D. Farkas, H. A. Hogg, G. A. Loew, and P. B. Wilson, “Recent Progress on Sled, The SLAC Energy Doubler”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1299-1303.
[n] D. Xiang et al., “Preliminary results of the echo-seeding experiment ECHO-7 at SLAC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPE072, pp. 2299-2301.
[n] D. Abell, B. Nash, I. Pogorelov, P. Moeller, R. Nagler, and N. Goldring, “Linear Canonical Transform Library for Fast Coherent X-Ray Wavefront Propagation”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPM023, unpublished.
[n] H. Wroe, “A New Approach to Preinjectors”, in Proc. LINAC'64, Madison, WI, USA, Jul. 1964, paper PART5-4, pp. 480-486.
[n] D. T. Tran, “A Low-Cost RF-Structure for Electron and Proton Linac”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1774-1777.
[n] N. Coppola, J. Tolkiehn, and C. Youngman, “Control Using Beckhoff Distributed Rail Systems at the European XFEL”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC046, pp. 669-672.
[n] H. P. H. Cheng et al., “Commissioning and Long-Term Results of a Fully-Automated Pulse-Based Optical Timing Distribution System at Dalian Coherent Light Source”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1909-1911. doi:10.18429/JACoW-IPAC2018-WEPAF043
[n] U. Becker, M. Zhang, and T. Weiland, “Two and Three Dimensional Simulations of Dark Current on TESLA-Cavities”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95C07, pp. 397-401.
[n] H. H. Fleischmann, “Use of Strong Relativistic Electron Rings for the Confinement of Thermonuclear Plasmas”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 966-970.
[n] A. M. Kozodaev, N. V. Lazarev, D. A. Liakin, A. M. Raskopin, and V. S. Skachkov, “Reliability Increase Ways for High-Power Linacs - ADS Drivers”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP4B03, pp. 942-944.
[n] S. H. Kim, C. Doose, K. Kim, R. Hogrefe, and R. Merl, “Magnetic Measurements of the Storage Ring Quadrupole Magnets for the 7-GeV Advanced Photon Source”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2805-2808.
[n] S. Thielk et al., “Design of a 25 kW fundamental power coupler for conduction cooled Nb3Sn industrial linac”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 526-529. doi:10.18429/JACoW-LINAC2024-TUPB100
[n] S. Rauch, R. Baer, W. Panschow, and M. Thieme, “Performance Tests of the Standard FAIR Equipment Controller Prototype”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMN018, pp. 919-921.
[n] J. M. Humbel, C. Baumgarten, J. Grillenberger, W. Joho, H. Muller, and H. Zhang, “Tuning of the PSI 590 MeV Ring Cyclotron for Accepting and Accelerating a Rebunched 72 MeV Proton Beam”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TH1PB02, pp. 437-439.
[n] V. K. Grishin et al., “X-Ray Radiation by Relativistic Electrons in Condensed Media on Base of MSU Race-Track Microtron”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAG12, pp. 105-106.
[n] I. J. Petzenhauser, U. Blell, P. J. Spiller, and C. Tenholt, “Efficient Pulsed Quadrupole”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2799-2801. doi:10.18429/JACoW-IPAC2015-WEPMA021
[n] J. B. Flanz and C. P. Sargent, “Simulations of Half- and Third-Interger Resonant Extraction from a One-GeV Pulse Stretcher Ring”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2444-2447.
[n] K. Baptiste, R. Kobana, and W. Lewis, “Development status and constructional features in RF HPA for ALS-U project at LBNL”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3602-3604. doi:10.18429/JACoW-IPAC2023-WEPM016
[n] G. Decker, J. Galayda, S. Krinsky, and L. Solomon, “Experience with Phase II Insertion Devices in the X-Ray Ring”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 470-473.
[n] H. Deitinghoff et al., “Design Study of High-Energy, High-Current RF Accelerators for Ion Implantation”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1468-1471.
[n] M. T. Heron, M. G. Abbott, J. A. Dobbing, A. J. Rose, J. Rowland, and I. Uzun, “Control Architecture of a New Power Supply Controller for Diamond Light Source”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP062, pp. 224-226.
[n] J. T. Seeman, M. C. Ross, J. C. Sheppard, and R. F. Stiening, “Observations of Accelerated High Current Low Emittance Beams in the SLC Linac”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1662-1666.
[n] P. N. Ostroumov et al., “Advanced Beam-Dynamics Simulation Tools for RIA”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper MOP71, pp. 186-188.
[n] K. R. Eppley et al., “SLC Polarized Beam Source Electron Optics Design”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1964-1967.
[n] S. T. Sanfilippo, A. Anghel, C. Calzolaio, A. Gerbershagen, and J. M. Schippers, “Conceptual Design of Superconducting Combined-Function Magnets for the Next Generation of Beam Cancer Therapy Gantry”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 139-141. doi:10.18429/JACoW-RUPAC2016-THCDMH01
[n] P. L. Colestock, G. P. Jackson, and L. Klamp, “Observation and Analysis of Nonlinear Parametric Coupling of Longitudinal Modes in Synchrotrons”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 126-129.
[n] R. Heuer, “Physics Results at the LHC and Implications for Future HEP Programmes”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper FRYCP01, pp. 4190-4194.
[n] R. Lovelace et al., “Progress on the normal conducting magnets for the Electron-Ion Collider”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1514-1516. doi:10.18429/JACoW-IPAC2024-TUPR44
[n] S. Hunt, “The Control System for the SLS Superconducting Third Harmonic Cavities.”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP545, pp. XX-XX.
[n] A. V. Kulikov and S. D. Ecklund, “SLC Positron Source Pulsed Flux Concentrator”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2005-2008.
[n] J. D. Jarvis et al., “Development of Diamond Field-Emitter Arrays for Free-Electron Lasers”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper THAAU04, pp. 477-480.
[n] O. Stringer, N. Kumar, C. P. Welsch, and H. D. Zhang, “A Gas Jet Beam Halo Monitor for LINACs”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 227-230. doi:10.18429/JACoW-LINAC2022-MOPORI04
[n] Y. Li, H. P. Bohlen, R. N. Tornoe, and E. L. Wright, “IOTs: The Next Generation RF Power Sources for Accelerators”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH168, pp. 0-3645.
[n] E. Carlier et al., “Design Aspects Related to the Reliability of the Control Architecture of the LHC Beam Dump Kicker Systems”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper TH213, pp. XX-XX.
[n] Y.-C. Chae and J. Keil, “Control of Collective Effects by Active Harmonic Cavity in an MBA-based Light Source with Application to the PETRA Upgrade”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1433-1435. doi:10.18429/JACoW-IPAC2018-TUPMF074
[n] F. E. Mills, S. Reeves, D. G. McGhee, and L. R. Turner, “A Pulsed Septum Magnet for the APS”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2817-2820.
[n] M. Bieler, I. V. Agapov, H. Ehrlichmann, J. Keil, G. K. Sahoo, and R. Wanzenberg, “PETRA III Operation”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2589-2591. doi:10.18429/JACoW-IPAC2017-WEPAB014
[n] H. Tarawneh, M. Ebbeni, M. Gehlot, and M. Holz, “Insertion Devices at the MAX IV 3 GeV Ring”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3865-3867. doi:10.18429/JACoW-IPAC2021-THPAB052
[n] P. Shcherbakov et al., “COMPARATIVE ANALYSIS OF WIDE APERTURE DIPOLE DESIGNS FOR THE SIS300 RING”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THFP04, pp. XX-XX.
[n] V. N. Pavlenko et al., “Characterization of Femtosecond-Laser-Induced Electron Emission from Diamond Nano-Tips”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 228-231. doi:10.18429/JACoW-NAPAC2019-MOPLH25
[n] S. Pavis, E. Carlier, C. A. Lolliot, and N. Magnin, “Early Fire Detection in High Power Equipment”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 775-779. doi:10.18429/JACoW-ICALEPCS2023-TUPDP096
For LaTeX
Use Complete Form
For BibTeX
References
- E. L. Garwin, W. B. Herrmannsfeldt, C. Sinclair, J. N. Weaver, J. J. Welch, and P. B. Wilson, “An Experimental Program to Build a Multimegawatt Lasertron for Super Linear Colliders”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2906-2909.
- K. Grigoryev et al., “Development of a combined element with an electric and magnetic fields for the JEDI experiment”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA189, pp. 4406-4408.
- E. R. Rotela, A. Baricikowski, J. Biggs, and S. Sharma, “Mechanical Design of a Flexible Bunch Compressor for APS Linac”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH167, pp. 4041-4043.
- K. L. Jensen, D. W. Feldman, E. J. Montgomery, P. G. O, and J. J. Petillo, “Corrections to Quantum Efficiency Predictions for Low Work Function Electron Sources”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP204, pp. 2504-2506.
- J. D. Jarvis et al., “Toward Energy-Spread Measurements of Diamond Field-Emitter Arrays”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUPPH034, pp. 317-319.
- J. T. M. Lyles et al., “Results from the Installation of a New 201 MHz RF System at LANSCE”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP107, pp. 303-306.
- W. Buczak, M. Buttner, F. Ehm, P. Jurcso, and M. Mitev, “DIAMON2 ÔÇô Improved Monitoring of CERN's Accelerator Controls Infrastructure”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THCOBA03, pp. 1415-1418.
- R. Maier and U. Hacker, “Beam Diagnostic for COSY-Juelich”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1574-1577.
- C. B?Âhme et al., “Status Overview of the HESR Beam Instrumentation”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 26-28.
- A. A. Mondelli and D. P. Chernin, “Plasma-Focused Cyclic Accelerators”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3521-3524.
- S. Sampayan et al., “Beam-Target Interaction Experiments for Bremsstrahlung Convertor Applications”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA96, pp. 1303-1305.
- J. Chen et al., “Cryomodules development for SHINE project”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS42, pp. 2788-2790.
- M. Puglisi, “A Linear and Non Linear Analysis of High Power rf Amplifiers”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3411-3414.
- G. Gold and V. Sabaiduc, “Design of a Digital Low-Level RF System for BEST Medical Cyclotrons”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper TUPPT024, pp. 203-205.
- M. Foss, W. Praeg, and K. Thompson, “A Transformer Septum Magnet”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4024-4027.
- M. Drury et al., “CEBAF Cryomodule Commissioning in the South Linac”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I07, pp. XX-XX.
- Y. Tsuzuki et al., “Polarimetry of Hard X-Rays from Highly Charged Ions Using a Si/CdTe Compton Camera”, presented at the 14th International Symposium of EBIS/T (EBIST2022), Whistler, BC, Canada, Jun. 2022, paper FR3WH01, unpublished.
- M. Yu, D. J. Harding, and G. Velev, “Dipole Corrector Magnets for the LBNE Beam Line”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP152, pp. 1115-1117.
- G. Thomas, K. Azarov, R. Barill?¿re, S. Cabaret, N. Kulman, and J. Rochez, “LHC GCS A framework for the production of 23 homogeneous control systems”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P1_042.
- J. D. Jarvis et al., “Fabrication of Self-Aligned-Gate Diamond Field-Emitter-Array Triodes for Free-Electron Lasers”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUPC60, pp. 376-378.
- G. Arnolds-Mayer, W.-D. Moeller, A. Matheisen, and D. Proch, “Industrial Production of Superconducting Accelerating Cavities for HERA”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 938-941.
- X. Geng, A. Groff, M. R. Pearson, and G. Taufer, “Motion Controls for ORNL Neutron Science Experimental Beamlines”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THMBCMO29, pp. 1261-1263.
- W. C. Barry, “Suppression of Propagating TE Modes in the FNAL Antiproton Source Stochastic Beam Cooling System”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2424-2427.
- B. Koubek, A. Schempp, J. S. Schmidt, and J. Haeuser, “RF Setup of the MedAustron RFQ”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB046, pp. 957-959.
- G. Sch??nemann et al., “An FPGA Based Data Acquisition System for a Fast Orbit Feedback at DELTA”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPD08, pp. 303-305.
- U. Bartz and A. Schempp, “A CW RFQ Prototype”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS034, pp. 2559-2561.
- V. Morozov, A. Hoover, D. Stratakis, F. Pilat, N. Evans, and S. Cousineau, “Proposed muon collider R&D at SNS”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPR39, pp. 2578-2581.
- Z. D. Farkas, C. J. Kruse, G. A. Loew, and R. A. McConnell, “Design and Performance of the SLAC RF Drive System”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 223-229.
- E. I. Simakov et al., “Update on Fabrication and Tuning of the Photonic Band Gap Accelerating Structure for the Wakefield Experiment”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC25, pp. 120-122.
- J. J. Petillo, K. Jensen, B. Levush, and J. N. P. Panagos, “Detailed Photoemission Modeling Using the 3D Finite-Element PIC Code MICHELLE”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUODC01, pp. 904-904.
- I. Lobach, M. Borland, K. C. Harkay, N. Kuklev, A. Sannibale, and Y. Sun, “Machine Learning for Anomaly Detection and Classification in Particle Accelerators”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 311-314.
- D. O. Tavares et al., “Development of the Sirius RF BPM Electronics”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPC09, pp. 63-66.
- A. Lehrach et al., “Design Work for the High-Energy Storage Ring for Antiprotons of the Future GSI Project”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAE001, pp. 776-778.
- R. Borghes, V. Chenda, A. Gianoncelli, and G. Kourousias, “Evolving a LabVIEW End-Station Software to a TANGO-Based Solution at the TwinMic Elettra Beamline”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 948-952.
- A. Canabal, J. D. Bowyer, P. Chacon, N. A. Gillespie, M. A. Madrid, and T. Tajima, “Development of a Temperature Mapping System for 1.3-GHz 9-Cell SRF Cavities”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS031, pp. 2406-2408.
- K.-H. Hsu, C.-K. Kuan, C.-S. Huang, H. Ho, and W.-Y. Lai, “Assembly process and inspection results for W100”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS24, pp. 3788-3790.
- E. M. Bajon et al., “Commissioning of the New AGS MMPS Transformers”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP003, pp. 1538-1540.
- R. Lemons, A. Marinelli, C. Durfee, J. Hirschman, N. Neveu, and S. Carbajo, “Realizing high average power temporal laser shaping for photocathode emittance reduction”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR73, unpublished.
- P. Catravas et al., “Beam Profile Measurement at 30 GeV using Optical Transition Radiation”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA100, pp. 2111-2113.
- C. Narug et al., “Successful cleanroom installation of PIP-II SSR2 coupler using robotic arm”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 168-170.
- J. T. M. Lyles et al., “Design, Test and Implementation of New 201.25 MHz Power Amplifier for the LANSCE Linac”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC069, pp. 3446-3448.
- G. P. Jackson and R. H. Siemann, “Comparison Between the Simulated and Measured Luminosity Performance of CESR”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1011-1014.
- E. Cicek et al., “An advanced digital feedback control system design for the muon linear accelerator”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA100, pp. 4194-4197.
- T. Watanabe, N. Fukunishi, O. Kamigaito, M. Kase, and Y. Sasaki, “Improvement of Beam Current Monitor with High Tc Current Sensor and SQUID at the RIBF”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC105, pp. 1260-1262.
- M. E. Read, G. Collins, P. Ferguson, L. R. Ives, R. H. Jackson, and D. Marsden, “10 MW, L-Band, Annular Beam Klystron for Accelerator Applications”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPHO09, pp. 948-950.
- J. T. M. Lyles et al., “A High Power Test Facility for New 201.25 MHz Power Amplifiers and Components”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC070, pp. 3449-3451.
- F. L. Krawczyk et al., “Design of a ?ƒ=0.175, 2-gap Spoke Resonator”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PT011, pp. XX-XX.
- G. Arnolds-Mayer, K. Jaeger, and R. Mayer, “Industrial Production of 8 Superconducting Accelerator Modules for HERA and 6 Superconducting Accelerating Cavities for DALINAC”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1070-1073.
- E. I. Simakov et al., “Experimental Study of Wakefields in an X-band Photonic Band Gap Accelerating Structure”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2689-2691.
- A. Meseck, G. P?Âplau, and U. van Rienen, “Numerical Studies on the Influence of Fill Patterns on Ion Clouds”, in Proc. 11th Int. Computational Accelerator Physics Conf. (ICAP'12), Rostock-Warnemunde, Germany, Aug. 2012, paper WEP02, pp. 146-148.
- S. Casalbuoni et al., “Field Quality of 1.5 m Long Conduction Cooled Superconducting Undulator Coils with 20 mm Period Length”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1395-1398.
- A. Kiourkos, S. Infante, and K. S. Seintaridis, “Energy Consumption Monitoring With Graph Databases and Service Oriented Architecture”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 720.
- W. Qin and I. Zagorodnov, “General method of short-range wakefield calculation for corrugated structures of arbitrary shape”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL125, pp. 3405-3408.
- M. P. Sangroula, R. M. Lill, R. R. Lindberg, and X. Sun, “Impedance Measurement of Vacuum Chamber Components for the Advance Photon Source (APS) Upgrade”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3583-3586.
- N. S. Ginzburg, K. E. Dorfman, A. Malkin, and R. M. Rozental, “A FEL Amplifier Based on Planar Bragg Waveguides”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper TUPPH033, pp. 393-396.
- C. Cuevas et al., “The Upgrade Path from Legacy VME to VXS Dual Star Connectivity for Large Scale Data Acquisition and Trigger Systems”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper TUBAULT03, pp. 550-553.
- J. R. Towler et al., “Technologies and R&D for a High Resolution Cavity BPM for the CLIC Main Beam”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPC20, pp. 415-418.
- V. Wu, A. Z. Chen, Z. Qian, and D. Wildman, “Design of a New Main Injector Cavity for the Fermilab Proton Driver Era”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPT028, pp. 2015-2017.
- T. Lamb et al., “Development of an Alternative, Photodiode-Based, Femtosecond Stable Detection Principle for the Link Stabilization in the Optical Synchronization Systems at FLASH and XFEL”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD35, pp. 380-382.
- R. Borghes et al., “A Common Software Framework for FEL Data Acquisition and Experiment Management at FERMI”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper FRCOAAB06, pp. 1481-1484.
- G. O. Bolme, G. P. Boicourt, K. F. Johnson, R. A. Lohsen, O. R. Sander, and L. S. Walling, “Measurement of RF Accelerator Cavity Field Levels at High Power from X-Ray Emissions”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO461, pp. 219-222.
- Z. D. Farkas, H. A. Hogg, G. A. Loew, and P. B. Wilson, “Recent Progress on Sled, The SLAC Energy Doubler”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1299-1303.
- D. Xiang et al., “Preliminary results of the echo-seeding experiment ECHO-7 at SLAC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPE072, pp. 2299-2301.
- D. Abell, B. Nash, I. Pogorelov, P. Moeller, R. Nagler, and N. Goldring, “Linear Canonical Transform Library for Fast Coherent X-Ray Wavefront Propagation”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM023, unpublished.
- H. Wroe, “A New Approach to Preinjectors”, in Proc. 1964 Linear Accelerator Conf. (LINAC'64), Madison, WI, USA, Jul. 1964, paper PART5-4, pp. 480-486.
- D. T. Tran, “A Low-Cost RF-Structure for Electron and Proton Linac”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1774-1777.
- N. Coppola, J. Tolkiehn, and C. Youngman, “Control Using Beckhoff Distributed Rail Systems at the European XFEL”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC046, pp. 669-672.
- H. P. H. Cheng et al., “Commissioning and Long-Term Results of a Fully-Automated Pulse-Based Optical Timing Distribution System at Dalian Coherent Light Source”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1909-1911.
- U. Becker, M. Zhang, and T. Weiland, “Two and Three Dimensional Simulations of Dark Current on TESLA-Cavities”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95C07, pp. 397-401.
- H. H. Fleischmann, “Use of Strong Relativistic Electron Rings for the Confinement of Thermonuclear Plasmas”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 966-970.
- A. M. Kozodaev, N. V. Lazarev, D. A. Liakin, A. M. Raskopin, and V. S. Skachkov, “Reliability Increase Ways for High-Power Linacs - ADS Drivers”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP4B03, pp. 942-944.
- S. H. Kim, C. Doose, K. Kim, R. Hogrefe, and R. Merl, “Magnetic Measurements of the Storage Ring Quadrupole Magnets for the 7-GeV Advanced Photon Source”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2805-2808.
- S. Thielk et al., “Design of a 25 kW fundamental power coupler for conduction cooled Nb3Sn industrial linac”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 526-529.
- S. Rauch, R. Baer, W. Panschow, and M. Thieme, “Performance Tests of the Standard FAIR Equipment Controller Prototype”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMN018, pp. 919-921.
- J. M. Humbel, C. Baumgarten, J. Grillenberger, W. Joho, H. Muller, and H. Zhang, “Tuning of the PSI 590 MeV Ring Cyclotron for Accepting and Accelerating a Rebunched 72 MeV Proton Beam”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper TH1PB02, pp. 437-439.
- V. K. Grishin et al., “X-Ray Radiation by Relativistic Electrons in Condensed Media on Base of MSU Race-Track Microtron”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAG12, pp. 105-106.
- I. J. Petzenhauser, U. Blell, P. J. Spiller, and C. Tenholt, “Efficient Pulsed Quadrupole”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2799-2801.
- J. B. Flanz and C. P. Sargent, “Simulations of Half- and Third-Interger Resonant Extraction from a One-GeV Pulse Stretcher Ring”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2444-2447.
- K. Baptiste, R. Kobana, and W. Lewis, “Development status and constructional features in RF HPA for ALS-U project at LBNL”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM016, pp. 3602-3604.
- G. Decker, J. Galayda, S. Krinsky, and L. Solomon, “Experience with Phase II Insertion Devices in the X-Ray Ring”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 470-473.
- H. Deitinghoff et al., “Design Study of High-Energy, High-Current RF Accelerators for Ion Implantation”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1468-1471.
- M. T. Heron, M. G. Abbott, J. A. Dobbing, A. J. Rose, J. Rowland, and I. Uzun, “Control Architecture of a New Power Supply Controller for Diamond Light Source”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP062, pp. 224-226.
- J. T. Seeman, M. C. Ross, J. C. Sheppard, and R. F. Stiening, “Observations of Accelerated High Current Low Emittance Beams in the SLC Linac”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1662-1666.
- P. N. Ostroumov et al., “Advanced Beam-Dynamics Simulation Tools for RIA”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper MOP71, pp. 186-188.
- K. R. Eppley et al., “SLC Polarized Beam Source Electron Optics Design”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1964-1967.
- S. T. Sanfilippo, A. Anghel, C. Calzolaio, A. Gerbershagen, and J. M. Schippers, “Conceptual Design of Superconducting Combined-Function Magnets for the Next Generation of Beam Cancer Therapy Gantry”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 139-141.
- P. L. Colestock, G. P. Jackson, and L. Klamp, “Observation and Analysis of Nonlinear Parametric Coupling of Longitudinal Modes in Synchrotrons”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 126-129.
- R. Heuer, “Physics Results at the LHC and Implications for Future HEP Programmes”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper FRYCP01, pp. 4190-4194.
- R. Lovelace et al., “Progress on the normal conducting magnets for the Electron-Ion Collider”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR44, pp. 1514-1516.
- S. Hunt, “The Control System for the SLS Superconducting Third Harmonic Cavities.”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP545, pp. XX-XX.
- A. V. Kulikov and S. D. Ecklund, “SLC Positron Source Pulsed Flux Concentrator”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2005-2008.
- J. D. Jarvis et al., “Development of Diamond Field-Emitter Arrays for Free-Electron Lasers”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper THAAU04, pp. 477-480.
- O. Stringer, N. Kumar, C. P. Welsch, and H. D. Zhang, “A Gas Jet Beam Halo Monitor for LINACs”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 227-230.
- Y. Li, H. P. Bohlen, R. N. Tornoe, and E. L. Wright, “IOTs: The Next Generation RF Power Sources for Accelerators”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH168, pp. 0-3645.
- E. Carlier et al., “Design Aspects Related to the Reliability of the Control Architecture of the LHC Beam Dump Kicker Systems”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper TH213, pp. XX-XX.
- Y.-C. Chae and J. Keil, “Control of Collective Effects by Active Harmonic Cavity in an MBA-based Light Source with Application to the PETRA Upgrade”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1433-1435.
- F. E. Mills, S. Reeves, D. G. McGhee, and L. R. Turner, “A Pulsed Septum Magnet for the APS”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2817-2820.
- M. Bieler, I. V. Agapov, H. Ehrlichmann, J. Keil, G. K. Sahoo, and R. Wanzenberg, “PETRA III Operation”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2589-2591.
- H. Tarawneh, M. Ebbeni, M. Gehlot, and M. Holz, “Insertion Devices at the MAX IV 3 GeV Ring”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3865-3867.
- P. Shcherbakov et al., “COMPARATIVE ANALYSIS OF WIDE APERTURE DIPOLE DESIGNS FOR THE SIS300 RING”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THFP04, pp. XX-XX.
- V. N. Pavlenko et al., “Characterization of Femtosecond-Laser-Induced Electron Emission from Diamond Nano-Tips”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 228-231.
- S. Pavis, E. Carlier, C. A. Lolliot, and N. Magnin, “Early Fire Detection in High Power Equipment”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP096, pp. 775-779.
Back to search