Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Allen et al., “High-Power Testing of the First PEP-II RF Cavity”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP069L, pp. 2032-2034.
[n] V. G. Ziemann et al., “The CTF3 Two-beam Test-stand Installation and Experimental Program”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP139, pp. 2821-2823.
[n] G. Vashchenko et al., “Recent Electron Beam Optimization at PITZ”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP007, pp. 689-691.
[n] J. Klute et al., “The Petra III Multibunch Feedback System”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD81, pp. 494-496.
[n] D. M?Âhl, “Introduction to the Session on Lattice Optimization for Stochastic Cooling”, in Proc. COOL'07, Bad Kreuznach, Germany, Sep. 2007, paper TUA2C05, pp. 96-98.
[n] R. Govil, S. J. Wheeler, and W. P. Leemans, “Experimental Observation of Electron Beam Focusing Through Plasma Lenses”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6V045, pp. 654-656.
[n] F. Zhang, L. G. Shen, and Y. J. Pei, “Design of A 4-cavities Collinear Load Coated with FeSiAl Alloy for 14 MeV LINAC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI035, pp. 3370-3372.
[n] M. Kuzmiak, A. Hrd, V. Bejsovec, M. Kriv, Z. Trejbal, and V. V. Kolga, “Accelerating System of Isochronous Cyclotron with a Non Sinusoidal Electric Field”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 308-315.
[n] V. V. Parkhomchuk, “Comparison of Hollow Electron Devices and Electron Heating”, in Proc. COOL'07, Bad Kreuznach, Germany, Sep. 2007, paper TUM1I03, pp. 64-67.
[n] C. E. Reece et al., “Fabrication and Testing of the SRF Cavities for the CEBAF 12 GeV Upgrade Prototype Cryomodule Renascence”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT081, pp. 4081-4083.
[n] M. Borland and M. Donald, “Experimental Characterization of PEP Low-Emittance Lattice”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1231-1234.
[n] B. Dhital, K. Brown, N. Tsoupas, P. Adams, T. Olsen, and W. Lin, “Beam trajectory influence on dispersion and uniform beams at NASA Space Radiation Laboratory’s beamline”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2985-2987. doi:10.18429/JACoW-IPAC2024-THPC11
[n] M. Billing, N. Mistry, L. Phillips, and D. Thomas, “Some Aspects of the Vacuum System for the Proposed Storage Ring CESR”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1370-1373.
[n] M. Stirbet, J. Popielarski, T. L. Grimm, and M. Johnson, “RF Conditioning and Testing of Fundamental Power Couplers for the RIA Project”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper THP26, pp. 682-684.
[n] M. Wang et al., “Study of Effect of Microscopic Defects on Superconducting Properties of High Purity SRF Cavity Nb Using Magneto-Optical Imaging and Electron Channeling Contrast Imaging”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, paper THPCAV015, pp..
[n] S. D. Webb and V. Litvinenko, “Dispersion Relations for 1D High-Gain FELs”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper MOPB03, pp. 56-59.
[n] J. Rose, A. Blednykh, W. Guo, P. Mortazavi, and N. A. Towne, “Conceptual Design of the NSLS-II RF Systems”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS091, pp. 2550-2552.
[n] B. Mustapha, S. V. Kutsaev, and P. N. Ostroumov, “RF Design Optimization of a 176 MHz CW RFQ”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPMA05, pp. 990-992.
[n] C. de Martinis et al., “Design and Test of a Prototype Cavity for the ELFA Injector”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1286-1289.
[n] V. Gostishchev, C. Dimopoulou, A. Dolinskii, F. Nolden, and M. Steck, “Internal Target Effects in the ESR Storage Ring with Cooling”, in Proc. COOL'07, Bad Kreuznach, Germany, Sep. 2007, paper THAP20, pp. 210-212.
[n] G. Carron and L. Thorndahl, “Impedance and Loss Factor Measurements of the CLIC Transfer Structure (CTS)”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 913-916.
[n] S. Henderson, “Recent Beam Commissioning Results from the Spallation Neutron Source”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper MOAP02, pp. 6-10.
[n] J. L. Kirchgessner, “Proposed High Current Booster Synchrotron for the Princeton-Pennsylvnia Accelerator”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 956-959.
[n] A. Bosotti et al., “Accelerating Voltage Amplitude and Phase Stabilization for the Milan Superconducting Cyclotron”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1303-1306.
[n] A. V. Sy et al., “Matching into the Helical Bunch Coalescing Channel for a High Luminosity Muon Collider”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2315-2317. doi:10.18429/JACoW-IPAC2015-TUPWI033
[n] T. Honma et al., “Present Status of Cyclotron Facility at NIRS”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper I-08, pp. 621-624.
[n] S. A. Glukhov, E. B. Levichev, S. A. Nikitin, P. A. Piminov, D. N. Shatilov, and S. V. Sinyatkin, “6D Tracking with Compute Unified Device Architecture (CUDA) Technology”, in Proc. ICAP'15, Shanghai, China, Oct. 2015, pp. 115-117. doi:10.18429/JACoW-ICAP2015-WEP34
[n] C. K. Allen, M. Ikegami, and H. Sako, “RMS Envelope Back-Propagation in the XAL Online Model”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP082, pp. 832-834.
[n] A. Valishev, “First Results of the IOTA Ring Research at Fermilab”, in Proc. IPAC'20, Caen, France, May 2020, paper TUXPLS01, pp. XX-XX.
[n] Y. S. Derbenev, “Electron Cooling Design for ELIC - a High Luminosity Electron-Ion Collider ”, in Proc. COOL'07, Bad Kreuznach, Germany, Sep. 2007, paper THAP12, pp. 187-190.
[n] S. M. Deambrosis et al., “A15 Superconductors by Thermal Diffusion in 6 GHz Cavities”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUOBAU07, pp. 155-158.
[n] K. Fant et al., “The Next Linear Collider Test Accelerator's RF Pulse Compression and Transmission Systems”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP089L, pp. 2062-2064.
[n] K. Hatanaka, E. Ikezawa, W. Yokota, and H. Nonaka, “Status of the RIKEN ECRIS”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F1-05, pp. 186-189.
[n] P. Krejcik et al., “Ultra-short Electron Bunch and X-ray Temporal Diagnostics with an X-band Transverse Deflecting Cavity”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper THBP01, pp. 264-266.
[n] S. Tomassini, F. Marcellini, P. Raimondi, and G. Sensolini, “A New RF Shielded Bellows for the DAFNE Upgrade”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP074, pp. 1706-1708.
[n] V. A. Dolgashev, Y. Higashi, T. Higo, C. D. Nantista, and S. G. Tantawi, “High Power Tests of Normal Conducting Single-Cell Structures”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS039, pp. 2430-2432.
[n] J. B?Âdewadt et al., “sFLASH - First Results of Direct Seeding at FLASH”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper WEOAI2, pp. 330-335.
[n] N. Araki et al., “Status Report of the HIMAC Accelerator Facility”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP112G, pp. 2659-2661.
[n] C. Xu et al., “Design of an Ultra-Compact Stripline BPM Receiver using MicroTCA for LCLS-II at SLAC”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPC23, pp. 731-734.
[n] S. Bettoni, M. Pedrozzi, and S. Reiche, “SwissFEL Injector Design: An Automatic Procedure”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO07, pp. 219-225.
[n] F. Marcellini, D. Alesini, S. Guiducci, and P. Raimondi, “Tests and Operational Experience with the DANE Stripline Injection Kicker”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP082, pp. 1739-1741.
[n] M. Tigner, “Accelerating System for the Cornell 10 - GeV Electron Synchrotron”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 241-246.
[n] C. Lechner et al., “Demonstration of SASE Suppression Through a Seeded Microbunching Instability”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOP060, pp. 177-180.
[n] C. Lechner et al., “First Direct Seeding at 38nm”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper TUOAI01, pp. 197-199.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Allen et al., “High-Power Testing of the First PEP-II RF Cavity”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP069L, pp. 2032-2034.
- V. G. Ziemann et al., “The CTF3 Two-beam Test-stand Installation and Experimental Program”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP139, pp. 2821-2823.
- G. Vashchenko et al., “Recent Electron Beam Optimization at PITZ”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THP007, pp. 689-691.
- J. Klute et al., “The Petra III Multibunch Feedback System”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD81, pp. 494-496.
- D. M?Âhl, “Introduction to the Session on Lattice Optimization for Stochastic Cooling”, in Proc. 6th Workshop on Beam Cooling and Related Topics (COOL'07), Bad Kreuznach, Germany, Sep. 2007, paper TUA2C05, pp. 96-98.
- R. Govil, S. J. Wheeler, and W. P. Leemans, “Experimental Observation of Electron Beam Focusing Through Plasma Lenses”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6V045, pp. 654-656.
- F. Zhang, L. G. Shen, and Y. J. Pei, “Design of A 4-cavities Collinear Load Coated with FeSiAl Alloy for 14 MeV LINAC”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI035, pp. 3370-3372.
- M. Kuzmiak, A. Hrd, V. Bejsovec, M. Kriv, Z. Trejbal, and V. V. Kolga, “Accelerating System of Isochronous Cyclotron with a Non Sinusoidal Electric Field”, in Proc. 6th Int. Cyclotron Conf. (Cyclotrons'72), Vancouver, Canada, Jul. 1972, pp. 308-315.
- V. V. Parkhomchuk, “Comparison of Hollow Electron Devices and Electron Heating”, in Proc. 6th Workshop on Beam Cooling and Related Topics (COOL'07), Bad Kreuznach, Germany, Sep. 2007, paper TUM1I03, pp. 64-67.
- C. E. Reece et al., “Fabrication and Testing of the SRF Cavities for the CEBAF 12 GeV Upgrade Prototype Cryomodule Renascence”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPT081, pp. 4081-4083.
- M. Borland and M. Donald, “Experimental Characterization of PEP Low-Emittance Lattice”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1231-1234.
- B. Dhital, K. Brown, N. Tsoupas, P. Adams, T. Olsen, and W. Lin, “Beam trajectory influence on dispersion and uniform beams at NASA Space Radiation Laboratory’s beamline”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPC11, pp. 2985-2987.
- M. Billing, N. Mistry, L. Phillips, and D. Thomas, “Some Aspects of the Vacuum System for the Proposed Storage Ring CESR”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1370-1373.
- M. Stirbet, J. Popielarski, T. L. Grimm, and M. Johnson, “RF Conditioning and Testing of Fundamental Power Couplers for the RIA Project”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper THP26, pp. 682-684.
- M. Wang et al., “Study of Effect of Microscopic Defects on Superconducting Properties of High Purity SRF Cavity Nb Using Magneto-Optical Imaging and Electron Channeling Contrast Imaging”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, paper THPCAV015, pp..
- S. D. Webb and V. Litvinenko, “Dispersion Relations for 1D High-Gain FELs”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper MOPB03, pp. 56-59.
- J. Rose, A. Blednykh, W. Guo, P. Mortazavi, and N. A. Towne, “Conceptual Design of the NSLS-II RF Systems”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS091, pp. 2550-2552.
- B. Mustapha, S. V. Kutsaev, and P. N. Ostroumov, “RF Design Optimization of a 176 MHz CW RFQ”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPMA05, pp. 990-992.
- C. de Martinis et al., “Design and Test of a Prototype Cavity for the ELFA Injector”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1286-1289.
- V. Gostishchev, C. Dimopoulou, A. Dolinskii, F. Nolden, and M. Steck, “Internal Target Effects in the ESR Storage Ring with Cooling”, in Proc. 6th Workshop on Beam Cooling and Related Topics (COOL'07), Bad Kreuznach, Germany, Sep. 2007, paper THAP20, pp. 210-212.
- G. Carron and L. Thorndahl, “Impedance and Loss Factor Measurements of the CLIC Transfer Structure (CTS)”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 913-916.
- S. Henderson, “Recent Beam Commissioning Results from the Spallation Neutron Source”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper MOAP02, pp. 6-10.
- J. L. Kirchgessner, “Proposed High Current Booster Synchrotron for the Princeton-Pennsylvnia Accelerator”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 956-959.
- A. Bosotti et al., “Accelerating Voltage Amplitude and Phase Stabilization for the Milan Superconducting Cyclotron”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1303-1306.
- A. V. Sy et al., “Matching into the Helical Bunch Coalescing Channel for a High Luminosity Muon Collider”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2315-2317.
- T. Honma et al., “Present Status of Cyclotron Facility at NIRS”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper I-08, pp. 621-624.
- S. A. Glukhov, E. B. Levichev, S. A. Nikitin, P. A. Piminov, D. N. Shatilov, and S. V. Sinyatkin, “6D Tracking with Compute Unified Device Architecture (CUDA) Technology”, in Proc. 12th Int. Computational Accelerator Physics Conf. (ICAP'15), Shanghai, China, Oct. 2015, pp. 115-117.
- C. K. Allen, M. Ikegami, and H. Sako, “RMS Envelope Back-Propagation in the XAL Online Model”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP082, pp. 832-834.
- A. Valishev, “First Results of the IOTA Ring Research at Fermilab”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, paper TUXPLS01, pp. XX-XX.
- Y. S. Derbenev, “Electron Cooling Design for ELIC - a High Luminosity Electron-Ion Collider ”, in Proc. 6th Workshop on Beam Cooling and Related Topics (COOL'07), Bad Kreuznach, Germany, Sep. 2007, paper THAP12, pp. 187-190.
- S. M. Deambrosis et al., “A15 Superconductors by Thermal Diffusion in 6 GHz Cavities”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUOBAU07, pp. 155-158.
- K. Fant et al., “The Next Linear Collider Test Accelerator's RF Pulse Compression and Transmission Systems”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP089L, pp. 2062-2064.
- K. Hatanaka, E. Ikezawa, W. Yokota, and H. Nonaka, “Status of the RIKEN ECRIS”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F1-05, pp. 186-189.
- P. Krejcik et al., “Ultra-short Electron Bunch and X-ray Temporal Diagnostics with an X-band Transverse Deflecting Cavity”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper THBP01, pp. 264-266.
- S. Tomassini, F. Marcellini, P. Raimondi, and G. Sensolini, “A New RF Shielded Bellows for the DAFNE Upgrade”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP074, pp. 1706-1708.
- V. A. Dolgashev, Y. Higashi, T. Higo, C. D. Nantista, and S. G. Tantawi, “High Power Tests of Normal Conducting Single-Cell Structures”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS039, pp. 2430-2432.
- J. B?Âdewadt et al., “sFLASH - First Results of Direct Seeding at FLASH”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper WEOAI2, pp. 330-335.
- N. Araki et al., “Status Report of the HIMAC Accelerator Facility”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP112G, pp. 2659-2661.
- C. Xu et al., “Design of an Ultra-Compact Stripline BPM Receiver using MicroTCA for LCLS-II at SLAC”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEPC23, pp. 731-734.
- S. Bettoni, M. Pedrozzi, and S. Reiche, “SwissFEL Injector Design: An Automatic Procedure”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper TUPSO07, pp. 219-225.
- F. Marcellini, D. Alesini, S. Guiducci, and P. Raimondi, “Tests and Operational Experience with the DANE Stripline Injection Kicker”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP082, pp. 1739-1741.
- M. Tigner, “Accelerating System for the Cornell 10 - GeV Electron Synchrotron”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 241-246.
- C. Lechner et al., “Demonstration of SASE Suppression Through a Seeded Microbunching Instability”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper MOP060, pp. 177-180.
- C. Lechner et al., “First Direct Seeding at 38nm”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper TUOAI01, pp. 197-199.
Back to search