Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] H. Hassanzadegan, A. Jansson, C. A. Thomas, D. Lipka, M. Werner, and A. Young, “System Overview and Current Status of the ESS Beam Position Monitors”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3653-3655. doi:10.18429/JACoW-IPAC2014-THPME166
[n] E. Bressi, “Operation and Patient Treatments at CNAO Facility”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THXA02, pp. 3180-3184.
[n] A. E. Aksentyev and V. Senichev, “Spin Motion Perturbation Effect on the EDM Statistic in the Frequency Domain Method”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 861-863. doi:10.18429/JACoW-IPAC2019-MOPTS011
[n] G. S. Dobbing and A. Wolski, “Instability Threshold Calculations for DIAMOND”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP7B03, pp. 1116-1118.
[n] D. Proft, F. Frommberger, and W. Hillert, “The Accelerator Control System at ELSA”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPEA002, pp. 3149-3151.
[n] M. Pullia, “Status Report of the CNAO Construction and Commissioning”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS070, pp. 3589-3591.
[n] J. Dedic, K. Zagar, A. M. M. Aulin S?Âderqvist, N. H. Claesson, R. Tavcar, and J. Neves Rodrigues, “FPGA Development Approach for Accelerator Systems with High Integration Complexity”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA088, pp. 876-878.
[n] M. Lee, “Model-Based Expert Systems for Linac Computer Controls”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE4-05, pp. 470-473.
[n] S. Jin, X. Y. Lu, K. Zhao, R. A. Rimmer, and A. T. Wu, “Effects of Cathode Shapes on BEP and EP During Vertical Surface Treatments on Niobium”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO022, pp. 411-417.
[n] N. Yu. Kazarinov and F. R. Osswald, “Simulation of Hollow Beam Formation at the Initial Part of RIB Transport Channel of SPIRAL2”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS017, pp. 3457-3459.
[n] R. A. Jameson, “Reliability Engineering for Facility Effectiveness”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1030-1036.
[n] Yu. P. Vakhrushin et al., “Applications of Linear Electron Accelerators to Industry and Medicine”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1085-1088.
[n] R. Appleby, M. D. Salt, L. C. Deacon, and E. Gschwendtner, “Background and Energy Deposition Studies for the CLIC Post-Collision Line”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC028, pp. 1060-1062.
[n] S. Sanaye Hajari, S. Doebert, and H. Shaker, “Beam Dynamics Studies of the CLIC Drive Beam Injector”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP034, pp. 131-133.
[n] B. Koubek, H. Podlech, A. Schempp, and J. S. Schmidt, “Results of the High Power Test of the 325 MHz 4-Rod RFQ Prototype”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3235-3237. doi:10.18429/JACoW-IPAC2014-THPME012
[n] K. Ishiwata et al., “Development of Strip-Line Type Beam Position Monitor”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO460, pp. 178-180.
[n] J.-H. Jang et al., “Status and Beam Commissioning Plan of PEFP 100 MeV Proton Linac”, in Proc. HB'12, Beijing, China, Sep. 2012, paper THO1C05, pp. 570-574.
[n] T. Schiffer, P. Haenisch, W. Hillert, and M. T. Switka, “Set up of a Synchrotron Light Monitor at the 2.5 GeV Booster Synchrotron at ELSA”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3468-3470. doi:10.18429/JACoW-IPAC2014-THPME098
[n] F. Carra et al., “Mechanical Robustness of HL-LHC Collimator Designs”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1070-1073. doi:10.18429/JACoW-IPAC2019-MOPTS091
[n] A. Kaminsky et al., “Quasi-optic RF Power Transmission Line from a FEM Oscillator to the Model of the CLIC Accelerating Structure”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPKF041, pp. 1054-1056.
[n] E. De Ley and D. Jacobs, “Rules-based Analysis with JBoss Drools : Adding Intelligence to Automation”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKS008, pp. 790-793.
[n] D. Proft and W. Hillert, “Implementation of a New Ramp Computation Scheme for the Magnet Power Supplies at ELSA”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4085-4087. doi:10.18429/JACoW-IPAC2016-THPOY001
[n] D. C. Larbalestier, P. J. Lee, and W. Starch, “Limitation of Critical Current Density by Intermetallic Formation in Fine Filament Nb-Ti Superconductors”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3743-3746.
[n] T. Shintake, “C-Band Main Linac RF System for e+e- Linear Collider of 0.5 to 1.0 TeV C.M. Energy”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP50, pp. 184-186.
[n] S. J. Brooks, “Vertical Orbit-excursion Fixed Field Alternating Gradient Accelerators (V-FFAGs) and 3D Cyclotrons”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 956-960. doi:10.18429/JACoW-IPAC2014-TUYB01
[n] Y.-S. Cho et al., “The KOMAC Accelerator Facility”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEOBB101, pp. 2052-2054.
[n] J.-P. Thiry, A. Dieckmann, F. Frommberger, W. Hillert, and J. F. Schmidt, “High Bandwidth Closed Orbit Control for a Fast Ramping Electron Accelerator”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1111-1113. doi:10.18429/JACoW-IPAC2014-TUPRO040
[n] A. Schempp, M. Ferch, and H. Klein, “A Light Ion Four Rod RFQ Injector”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 267-270.
[n] D. Proft, W. Hillert, and T. Perlitius, “Development of New Microcontroller Based Power Supply Control Units at ELSA”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2777-2779. doi:10.18429/JACoW-IPAC2015-WEPMA014
[n] S. G. Tantawi, “Progress in High Gradient Accelerator Structure Research for Future Linear Colliders”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE3RAI01, pp. 1872-1872.
[n] B. Koubek, H. Podlech, A. Schempp, and J. S. Schmidt, “Power Tests of the 325 MHz 4-ROD RFQ Prototype”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO018, pp. 3800-3802.
[n] J. Y. Ryu, Y.-S. Cho, J.-H. Jang, H. S. Kim, H.-J. Kwon, and K. T. Seol, “Measurement of the Beam Position Monitor's Electrical Performance and Electronics Sensitivity for 100 MeV Proton Linac and Beam Lines”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME056, pp. 598-600.
[n] S. T. Craig, P. J. P. Bunge, and R. J. West, “A 3 kW 35 to 70 MHz Solid-State Amplifier”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1005-1008.
[n] P. A. Bong and E. Carrone, “Linac Coherent Light Source Personnel Protection System Architecture”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP107, pp. XX-XX.
[n] A. N. Chernykh, E. M. Ivanov, V. S. Khoroshkov, and G. I. Klenov, “Radiation Oncology Ophthalmic Center Based on the C-80 Accelerator at the NRC Kurchatov Institute" - PNPI"”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 145-148. doi:10.18429/JACoW-RUPAC2018-FRCAMH03
[n] M. I. Grachev and E. V. Ponomareva, “Optical Design of the Proton Beam Lines for the Neutron Research Complex INR RAS and Medical Application”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC021, pp. 2049-2051.
[n] J. L. Navarro Quirante et al., “CALIFES: A Multi-Purpose Electron Beam for Accelerator Technology Tests”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP030, pp. 121-123.
[n] V. H. Hardion, G. Abeille, A. Buteau, S. Le, N. Leclercq, and S. Pierre-Joseph Zephir, “Assessing Software Quality at Each Step of its Lifecycle to Enhance Reliability of Control Systems”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper THBHMUST02, pp. 1205-1208.
[n] O. Piquet, M. Desmons, and A. France, “RF Tuning of the IPHI RFQ”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3355-3357. doi:10.18429/JACoW-IPAC2014-THPME055
[n] P. Haenisch, W. Hillert, and B. Neff, “Water-cooled Thin Walled Beam Pipes of the Fast Ramping Storage Ring ELSA”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2780-2782. doi:10.18429/JACoW-IPAC2015-WEPMA015
[n] A. Deyhim, S. W. Hartman, and J. D. Kulesza, “Development of an Integrated Field Measurement System (IFMS) for NSLS II”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP238, pp. 1271-1273.
[n] A. E. Aksentyev and V. Senichev, “Spin Decoherence in the Frozen Spin Storage Ring Method of Search for a Particle EDM”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 864-866. doi:10.18429/JACoW-IPAC2019-MOPTS012
[n] Y. Hao et al., “Start-to-End Simulation of eRHIC ERL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2535-2538. doi:10.18429/JACoW-IPAC2016-WEPMW044
[n] H.-J. Kwon et al., “Beam Tests of the PEFP 20 MeV Accelerator”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP028, pp. 3434-3436.
[n] S. Sanaye Hajari, S. Doebert, and H. Shaker, “Sub-Harmonic Bunching System of CLIC Drive Beam Injector”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPME047, pp. 1670-1672.
[n] W. Kaabi et al., “Power Couplers for XFEL”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO001, pp. 2310-2312.
[n] J. S. Schmidt, B. Koubek, and A. Schempp, “Simulations on the Boundary Fields of 4-rod RFQ Electrodes”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO020, pp. 3803-3805.
[n] J. S. Berg, “International Design Study of a Neutrino Factory”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THXMH02, pp. 3597-3601.
[n] J. F. Schmidt and W. Hillert, “Studies on Depolarization by Synchrotron Radiation using Elegant Particle Tracking”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 695-697. doi:10.18429/JACoW-IPAC2016-MOPOR046
[n] J. S. Schmidt, B. Koubek, and A. Schempp, “Simulations of the Influence of 4-Rod RFQ Elements on its Voltage Distribution”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP038, pp. 3818-3820.
[n] C. Bracco et al., “Beam Transfer Line Design for a Plasma Wakefield Acceleration Experiment (AWAKE) at the CERN SPS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPEA051, pp. 1247-1249.
[n] J.-P. Thiry, A. Balling, A. Dieckmann, F. Frommberger, and W. Hillert, “The New Orbit Correction System at ELSA”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME006, pp. 479-481.
[n] I.-S. Hong et al., “Conceptual Design of the PEFP Beam Line”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP093, pp. 3581-3583.
[n] F. Meot, S. J. Brooks, V. Ptitsyn, D. Trbojevic, and N. Tsoupas, “End-to-end 9-D+SR Polarized Bunch Transport in eRHIC Energy-recovery Recirculator, Some Aspects”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2369-2371. doi:10.18429/JACoW-IPAC2015-TUPWI052
[n] S. N. Andrianov and N. V. Kulabukhova, “Two and three Dimensional Models for Analytical and Numerical Space Charge Simulation”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA038, pp. 2585-2587.
[n] R. M. Hutcheon, “A Modelling Study of the Four-Rod RFQ”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper TUP0004, pp. 94-96.
[n] D. J. Nicklaus et al., “Detector Controls for the NOvA Experiment Using Acnet-in-a-Box”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC070, pp. 740-742.
[n] L. R. Doolittle, “Applications of General-Purpose Reconfigurable LLRF Processing Architectures”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE3RAI04, pp. 1879-1882.
[n] C. Rossi et al., “Commissioning of the Linac4 RFQ at the 3 MeV Test Stand”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO082, pp. 3951-3953.
[n] D. Proft and W. Hillert, “A New FPGA Based Timing System at ELSA”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 802-804. doi:10.18429/JACoW-IPAC2015-MOPHA012
[n] G. Cattenoz et al., “Vacuum Acceptance Tests for the UHV Room Temperature Vacuum System of the LHC during LS1”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2357-2359. doi:10.18429/JACoW-IPAC2014-WEPME041
[n] V. P. Suller, “Review of the Status of Synchrotron Radiation Storage Rings”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 77-82.
[n] U. Bartz, J. Gerbig, H. C. Lenz, and A. Schempp, “Optimization of a CW RFQ Prototype”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP034, pp. 3809-3811.
[n] E. Bravin, “First Results from the LHC Beam Instrumentation Systems”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE4GRC03, pp. 1970-1972.
[n] S. Papadopoulos et al., “Sub-micro-Tesla Magnetic Shielding Design for Cryomodules in the High-gradient Program at CERN”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 278-282. doi:10.18429/JACoW-SRF2017-MOPB090
[n] F. Bakkali Taheri et al., “Experimental and Theoretical Studies of the Properties of Coherent Smith-Purcell Radiation”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 344-346. doi:10.18429/JACoW-IPAC2016-MOPMR041
[n] G. L. Dorofeev, E. E. Donets, and V. M. Drobin, “The Influence of the Unclosed Superconducting Magnetic Shield on the Dynamics of the Charged Particles Beam”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 337-339. doi:10.18429/JACoW-RUPAC2018-WEPSB27
[n] D. C. Larbalestier, “Superconducting Materials for Particle Accelerator Magnets”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3299-3304.
[n] Y. Senichev, A. N. Ivanov, A. Lehrach, R. Maier, D. Zyuzin, and S. N. Andrianov, “Spin Tune Decoherence in Multipole Fields”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3017-3019. doi:10.18429/JACoW-IPAC2014-THPRO062
[n] P. Piot et al., “Longitudinal Beam Diagnostics for the ILC Injectors and Bunch Compressors”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP011, pp. 3971-3973.
For LaTeX
Use Complete Form
For BibTeX
References
- H. Hassanzadegan, A. Jansson, C. A. Thomas, D. Lipka, M. Werner, and A. Young, “System Overview and Current Status of the ESS Beam Position Monitors”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3653-3655.
- E. Bressi, “Operation and Patient Treatments at CNAO Facility”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THXA02, pp. 3180-3184.
- A. E. Aksentyev and V. Senichev, “Spin Motion Perturbation Effect on the EDM Statistic in the Frequency Domain Method”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 861-863.
- G. S. Dobbing and A. Wolski, “Instability Threshold Calculations for DIAMOND”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP7B03, pp. 1116-1118.
- D. Proft, F. Frommberger, and W. Hillert, “The Accelerator Control System at ELSA”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPEA002, pp. 3149-3151.
- M. Pullia, “Status Report of the CNAO Construction and Commissioning”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS070, pp. 3589-3591.
- J. Dedic, K. Zagar, A. M. M. Aulin S?Âderqvist, N. H. Claesson, R. Tavcar, and J. Neves Rodrigues, “FPGA Development Approach for Accelerator Systems with High Integration Complexity”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA088, pp. 876-878.
- M. Lee, “Model-Based Expert Systems for Linac Computer Controls”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE4-05, pp. 470-473.
- S. Jin, X. Y. Lu, K. Zhao, R. A. Rimmer, and A. T. Wu, “Effects of Cathode Shapes on BEP and EP During Vertical Surface Treatments on Niobium”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO022, pp. 411-417.
- N. Yu. Kazarinov and F. R. Osswald, “Simulation of Hollow Beam Formation at the Initial Part of RIB Transport Channel of SPIRAL2”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS017, pp. 3457-3459.
- R. A. Jameson, “Reliability Engineering for Facility Effectiveness”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1030-1036.
- Yu. P. Vakhrushin et al., “Applications of Linear Electron Accelerators to Industry and Medicine”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1085-1088.
- R. Appleby, M. D. Salt, L. C. Deacon, and E. Gschwendtner, “Background and Energy Deposition Studies for the CLIC Post-Collision Line”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC028, pp. 1060-1062.
- S. Sanaye Hajari, S. Doebert, and H. Shaker, “Beam Dynamics Studies of the CLIC Drive Beam Injector”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP034, pp. 131-133.
- B. Koubek, H. Podlech, A. Schempp, and J. S. Schmidt, “Results of the High Power Test of the 325 MHz 4-Rod RFQ Prototype”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3235-3237.
- K. Ishiwata et al., “Development of Strip-Line Type Beam Position Monitor”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper MO460, pp. 178-180.
- J.-H. Jang et al., “Status and Beam Commissioning Plan of PEFP 100 MeV Proton Linac”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper THO1C05, pp. 570-574.
- T. Schiffer, P. Haenisch, W. Hillert, and M. T. Switka, “Set up of a Synchrotron Light Monitor at the 2.5 GeV Booster Synchrotron at ELSA”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3468-3470.
- F. Carra et al., “Mechanical Robustness of HL-LHC Collimator Designs”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1070-1073.
- A. Kaminsky et al., “Quasi-optic RF Power Transmission Line from a FEM Oscillator to the Model of the CLIC Accelerating Structure”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPKF041, pp. 1054-1056.
- E. De Ley and D. Jacobs, “Rules-based Analysis with JBoss Drools : Adding Intelligence to Automation”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPKS008, pp. 790-793.
- D. Proft and W. Hillert, “Implementation of a New Ramp Computation Scheme for the Magnet Power Supplies at ELSA”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4085-4087.
- D. C. Larbalestier, P. J. Lee, and W. Starch, “Limitation of Critical Current Density by Intermetallic Formation in Fine Filament Nb-Ti Superconductors”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3743-3746.
- T. Shintake, “C-Band Main Linac RF System for e+e- Linear Collider of 0.5 to 1.0 TeV C.M. Energy”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper MOP50, pp. 184-186.
- S. J. Brooks, “Vertical Orbit-excursion Fixed Field Alternating Gradient Accelerators (V-FFAGs) and 3D Cyclotrons”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 956-960.
- Y.-S. Cho et al., “The KOMAC Accelerator Facility”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEOBB101, pp. 2052-2054.
- J.-P. Thiry, A. Dieckmann, F. Frommberger, W. Hillert, and J. F. Schmidt, “High Bandwidth Closed Orbit Control for a Fast Ramping Electron Accelerator”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1111-1113.
- A. Schempp, M. Ferch, and H. Klein, “A Light Ion Four Rod RFQ Injector”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 267-270.
- D. Proft, W. Hillert, and T. Perlitius, “Development of New Microcontroller Based Power Supply Control Units at ELSA”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2777-2779.
- S. G. Tantawi, “Progress in High Gradient Accelerator Structure Research for Future Linear Colliders”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE3RAI01, pp. 1872-1872.
- B. Koubek, H. Podlech, A. Schempp, and J. S. Schmidt, “Power Tests of the 325 MHz 4-ROD RFQ Prototype”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO018, pp. 3800-3802.
- J. Y. Ryu, Y.-S. Cho, J.-H. Jang, H. S. Kim, H.-J. Kwon, and K. T. Seol, “Measurement of the Beam Position Monitor's Electrical Performance and Electronics Sensitivity for 100 MeV Proton Linac and Beam Lines”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPME056, pp. 598-600.
- S. T. Craig, P. J. P. Bunge, and R. J. West, “A 3 kW 35 to 70 MHz Solid-State Amplifier”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1005-1008.
- P. A. Bong and E. Carrone, “Linac Coherent Light Source Personnel Protection System Architecture”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP107, pp. XX-XX.
- A. N. Chernykh, E. M. Ivanov, V. S. Khoroshkov, and G. I. Klenov, “Radiation Oncology Ophthalmic Center Based on the C-80 Accelerator at the NRC Kurchatov Institute" - PNPI"”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 145-148.
- M. I. Grachev and E. V. Ponomareva, “Optical Design of the Proton Beam Lines for the Neutron Research Complex INR RAS and Medical Application”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC021, pp. 2049-2051.
- J. L. Navarro Quirante et al., “CALIFES: A Multi-Purpose Electron Beam for Accelerator Technology Tests”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP030, pp. 121-123.
- V. H. Hardion, G. Abeille, A. Buteau, S. Le, N. Leclercq, and S. Pierre-Joseph Zephir, “Assessing Software Quality at Each Step of its Lifecycle to Enhance Reliability of Control Systems”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper THBHMUST02, pp. 1205-1208.
- O. Piquet, M. Desmons, and A. France, “RF Tuning of the IPHI RFQ”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3355-3357.
- P. Haenisch, W. Hillert, and B. Neff, “Water-cooled Thin Walled Beam Pipes of the Fast Ramping Storage Ring ELSA”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2780-2782.
- A. Deyhim, S. W. Hartman, and J. D. Kulesza, “Development of an Integrated Field Measurement System (IFMS) for NSLS II”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP238, pp. 1271-1273.
- A. E. Aksentyev and V. Senichev, “Spin Decoherence in the Frozen Spin Storage Ring Method of Search for a Particle EDM”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 864-866.
- Y. Hao et al., “Start-to-End Simulation of eRHIC ERL”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2535-2538.
- H.-J. Kwon et al., “Beam Tests of the PEFP 20 MeV Accelerator”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP028, pp. 3434-3436.
- S. Sanaye Hajari, S. Doebert, and H. Shaker, “Sub-Harmonic Bunching System of CLIC Drive Beam Injector”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPME047, pp. 1670-1672.
- W. Kaabi et al., “Power Couplers for XFEL”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWO001, pp. 2310-2312.
- J. S. Schmidt, B. Koubek, and A. Schempp, “Simulations on the Boundary Fields of 4-rod RFQ Electrodes”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO020, pp. 3803-3805.
- J. S. Berg, “International Design Study of a Neutrino Factory”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THXMH02, pp. 3597-3601.
- J. F. Schmidt and W. Hillert, “Studies on Depolarization by Synchrotron Radiation using Elegant Particle Tracking”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 695-697.
- J. S. Schmidt, B. Koubek, and A. Schempp, “Simulations of the Influence of 4-Rod RFQ Elements on its Voltage Distribution”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPP038, pp. 3818-3820.
- C. Bracco et al., “Beam Transfer Line Design for a Plasma Wakefield Acceleration Experiment (AWAKE) at the CERN SPS”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPEA051, pp. 1247-1249.
- J.-P. Thiry, A. Balling, A. Dieckmann, F. Frommberger, and W. Hillert, “The New Orbit Correction System at ELSA”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPME006, pp. 479-481.
- I.-S. Hong et al., “Conceptual Design of the PEFP Beam Line”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP093, pp. 3581-3583.
- F. Meot, S. J. Brooks, V. Ptitsyn, D. Trbojevic, and N. Tsoupas, “End-to-end 9-D+SR Polarized Bunch Transport in eRHIC Energy-recovery Recirculator, Some Aspects”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2369-2371.
- S. N. Andrianov and N. V. Kulabukhova, “Two and three Dimensional Models for Analytical and Numerical Space Charge Simulation”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPEA038, pp. 2585-2587.
- R. M. Hutcheon, “A Modelling Study of the Four-Rod RFQ”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper TUP0004, pp. 94-96.
- D. J. Nicklaus et al., “Detector Controls for the NOvA Experiment Using Acnet-in-a-Box”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC070, pp. 740-742.
- L. R. Doolittle, “Applications of General-Purpose Reconfigurable LLRF Processing Architectures”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE3RAI04, pp. 1879-1882.
- C. Rossi et al., “Commissioning of the Linac4 RFQ at the 3 MeV Test Stand”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO082, pp. 3951-3953.
- D. Proft and W. Hillert, “A New FPGA Based Timing System at ELSA”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 802-804.
- G. Cattenoz et al., “Vacuum Acceptance Tests for the UHV Room Temperature Vacuum System of the LHC during LS1”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2357-2359.
- V. P. Suller, “Review of the Status of Synchrotron Radiation Storage Rings”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 77-82.
- U. Bartz, J. Gerbig, H. C. Lenz, and A. Schempp, “Optimization of a CW RFQ Prototype”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPP034, pp. 3809-3811.
- E. Bravin, “First Results from the LHC Beam Instrumentation Systems”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE4GRC03, pp. 1970-1972.
- S. Papadopoulos et al., “Sub-micro-Tesla Magnetic Shielding Design for Cryomodules in the High-gradient Program at CERN”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 278-282.
- F. Bakkali Taheri et al., “Experimental and Theoretical Studies of the Properties of Coherent Smith-Purcell Radiation”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 344-346.
- G. L. Dorofeev, E. E. Donets, and V. M. Drobin, “The Influence of the Unclosed Superconducting Magnetic Shield on the Dynamics of the Charged Particles Beam”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 337-339.
- D. C. Larbalestier, “Superconducting Materials for Particle Accelerator Magnets”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3299-3304.
- Y. Senichev, A. N. Ivanov, A. Lehrach, R. Maier, D. Zyuzin, and S. N. Andrianov, “Spin Tune Decoherence in Multipole Fields”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3017-3019.
- P. Piot et al., “Longitudinal Beam Diagnostics for the ILC Injectors and Bunch Compressors”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP011, pp. 3971-3973.
Back to search