JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	M. Fouaidy, A. Caruette, T. Junquera, and Q. S. Shu, “Surface Scanning Thermometers for Diagnostic Purpose of the TESLA SRF Cavities”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95F06, pp. 559-563. 
[n]	M. Poelker et al., “Status of High Polarization DC High Voltage GaAs Photoguns”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRXAB01, pp. 3756-3760. 
[n]	J.-Y. Chuang, C.-C. Chang, C. M. Cheng, Y. Z. Lin, I. C. Sheng, and Y. C. Yang, “The Development of a FPGA Based Front End Safety Interlock System”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 189-191. doi:10.18429/JACoW-PCaPAC2018-THP13
[n]	M. Tomizawa et al., “Construction of an Interdigital-H Linac at INS”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 757-760. 
[n]	D. Li, J. Corlett, and W. Turner, “Temperature Distribution Calculations on Beryllium Windows in RF Cavities for a Muon Collider”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4089, pp. 273-275. 
[n]	J. Zemella, D. Novikov, M. Tolkiehn, J. Rossbach, and H. Sinn, “Study of a Silicon Based XFELO for the European XFEL”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper TUPA07, pp. 202-205. 
[n]	A. Mapar, F. Pourboghrat, T. R. Bieler, and C. Compton, “Dynamic Hardening Rule; a Generalization of the Classical Hardening Rule for Crystal Plasticity”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP037, pp. 499-503. 
[n]	S. Hansen, K. N. Henrichsen, and M. de Jong, “Extension of the CERN ISR Energy by Acceleration of Stacked Beams”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 805-807. 
[n]	M. A. Drury et al., “Overview of SNS Cryomodule Performance”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPE060, pp. 3496-3498. 
[n]	A. Xiao, V. Sajaev, and Y. P. Sun, “Simulation Studies of the Helical Superconducting Undulator Installed at APS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1290-1292. doi:10.18429/JACoW-IPAC2018-TUPMF018
[n]	U. Trinks, “The Superconducting Separated Orbit Cyclotron Triton”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-11, pp. XX-XX. 
[n]	C. H. Kuo, J. S. Chen, K. T. Hsu, and G. Lin, “Transverse Profile Measurement System at SRRC”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1646-1649. 
[n]	G. Olry et al., “Status of the Cryomodules and Cavities Development for the SPIRAL2 Superconducting Linac”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP78, pp. XX-XX. 
[n]	R. Sundelin, “What did we learn from Storage Ring Tests?”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-14, pp. XX-XX. 
[n]	H. Okuno et al., “Heavy Ion Accelerators for RIKEN RI Beam Factory and Upgrade Plans”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGE11, pp. 416-421. 
[n]	M. G. Hoffmann et al., “The Longitudinal Coupled Bunch Feedback for HERA-p”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH085, pp. 2985-2987. 
[n]	L. Liu, X. R. Resende, and A. R. D. Rodrigues, “SIRIUS (Br): A New Brazilian Synchrotron Light Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA006, pp. 2481-2483. 
[n]	K. Beckert, P. Beller, B. Franczak, B. Franzke, F. Nolden, and M. Steck, “Deceleration of Highly Charged Ions in the ESR”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP4B06, pp. 587-589. 
[n]	M. Yoshimoto et al., “Beam Study Results with HBC Stripping Foils at the 3-GeV RCS in J-PARC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB020, pp. 3927-3929. 
[n]	J. Randhahn et al., “Design and Operation of a Ferrite Loaded Kicker Cavity for the Longitudinal Coupled Bunch Feedback for HERA-p”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH087, pp. 2991-2993. 
[n]	S. Abeyratne, B. Erdelyi, and S. L. Manikonda, “Design Studies of Pre-Boosters of Different Circumference for an Electron Ion Collider at JLab”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP251, pp. 1954-1956. 
[n]	M. E. Angoletta et al., “CERN's LEIR Digital LLRF: System Overview and Operational Experience”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA057, pp. 1464-1466. 
[n]	C. M. Miao, T. M. Antonsen, and J. Palastro, “Simulation of High-Power Tunable THz Generation in Corrugated Plasma Waveguides”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 460-463. doi:10.18429/JACoW-NAPAC2016-TUA4CO04
[n]	J. DeLong, J. M. Brennan, T. Hayes, N. Le, and K. S. Smith, “A Bunch to Bucket Phase Detector Using Digital Receiver Technology”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB025, pp. 3341-3343. 
[n]	Y. C. Chae et al., “A 2-GeV, 1-MW Pulsed Proton Source for a Spallation Source”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP002G, pp. 521-523. 
[n]	M. J. Barnes et al., “Operational Experience of a Prototype LHC Injection Kicker Magnet with a Low SEY Coating and Redistributed Power Deposition”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3974-3977. doi:10.18429/JACoW-IPAC2019-THPRB072
[n]	H. A. Thiessen, F. Neri, K. R. Rust, and D. B. Redd, “Multi-Pulse Extraction from Los Alamos Proton Storage Ring for Radiographic Applications”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P021, pp. 273-275. 
[n]	M. Pekeler, K. Dunkel, C. Piel, H. Vogel, and P. vom Stein, “Design of a 40 MeV Linear Accelerator for Protons and Deuterons using Superconducting Half Wave Resonators”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPLE072, pp. 936-938. 
[n]	T. C. Fan, C. S. Hwang, and F. Y. Lin, “The Dynamic Effect of the Vertical Field Corrector of the 1.8 T Wiggler”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP117G, pp. 2561-2563. 
[n]	T. Friedrich, “Systems and Software Engineering for the MAX IV Facility”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP054, pp. 209-211. 
[n]	A. Lazos, H. Kobayashi, T. Suwada, and T. Urano, “BPM Electronics for the B-Factory e+e- Linac at KEK”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-71, pp. 872-874. 
[n]	R. Bossart, H. H. Braun, M. Chanudet-Cayla, G. Guignard, J. A. Riche, and M. Valentini, “Simulation of the CTF Drive Beam Line and Comparison with the Experiment”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP6B16, pp. 1393-1395. 
[n]	M. A. Wilson et al., “NIST-Los Alamos Racetrack Microtron Status”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TU2-07, pp. 255-258. 
[n]	S. Gayadeen, M. J. Furseman, and G. Rehm, “A Procedure for the Characterization of Corrector Magnets”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 728-731. doi:10.18429/JACoW-IBIC2016-WEPG43
[n]	L. Wartski, M. Bolore, G. Filippi, J. Lasalle, and S. Roland, “Thin Films of Linac Beams as Non-Destructive Devices for Particle Beam Intensity, Profile, Centering and Energy Monitors”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1552-1558. 
[n]	H. Junkes, “EPICS Also for Small and Medium Sized Experiments”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1270. doi:10.18429/JACoW-ICALEPCS2019-WEPHA075
[n]	Y. B. Leng, Y. B. Yan, L. Y. Yu, and W. M. Zhou, “Data Acquisition for SSRF Ring Bunch Charge Monitor”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE034, pp. 1047-1049. 
[n]	F. Toufexis, V. A. Dolgashev, C. Limborg-Deprey, and S. G. Tantawi, “A Compact EUV Light Source Using a mm-Wave Undulator”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 928-931. doi:10.18429/JACoW-IPAC2017-MOPVA034
[n]	G. Tosin, R. Bas?¡lio, S. Casas, and R. J. F. Marcondes, “Bending Magnets Made with Permanent Magnets for the LNLS-2 Electron Storage Ring”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP001, pp. 127-129. 
[n]	N. Wang et al., “Impedance and Collective Effects Studies in CEPC”, in Proc. HF'14, Beijing, China, Oct. 2014, paper SAT4B1, pp. 218-222. 
[n]	W. Thongpakdi and S. Rimjaem, “Development of Injector System for MIR/THz Free-Electron Laser Facility in Thailand”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2767-2769. doi:10.18429/JACoW-IPAC2017-WEPAB084
[n]	M. Steck, K. Beckert, P. Beller, B. Franczak, B. Franzke, and F. Nolden, “Improved Performance of the Heavy Ion Storage Ring ESR”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT016, pp. 1168-1170. 
[n]	A. Dolinskii, K. Beckert, P. Beller, B. Franzke, F. Nolden, and M. Steck, “Design of a Collector Ring for Antiproton and Rare Isotope Beams”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPLE076, pp. 572-574. 
[n]	D. F. Ratner and A. Chao, “Seeded Radiation Sources with Sawtooth Waveforms”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper MOPB21, pp. 53-56. 
[n]	Y. Cho et al., “A 1- to 5-MW, RCS-Based, Short-Pulse Spallation Neutron Source”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8B011, pp. 953-955. 
[n]	C. H. Chang, M. H. Huang, C. S. Hwang, G. J. Hwang, F. Y. Lin, and P. K. Tseng, “Construction and Measurement of the Bending Magnets for the SRRC Transfer Line”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2241-2244. 
[n]	A. S. Hofler and P. Evtushenko, “Optimizing RF Gun Cavity Geometry within an Automated Injector Design System”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUODS6, pp. 805-807. 
[n]	D. Horan and E. E. Cherbak, “High-Power RF Testing of a 352-MHz Fast-Ferrite RF Cavity Tuner at the Advanced Photon Source”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT035, pp. 2407-2409. 
[n]	J. Popielarski et al., “Development of a Superconducting Half Wave Resonator for Beta 0.53”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP039, pp. 2080-2082. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search