JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	S. Chouksey et al., “Installation and Integration of Indus-2”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA096, pp. 782-784. 
[n]	J. C. Schouten and E. C. M. Rial, “Electron Beam Heating and Operation of the Cryogenic Undulator and Superconducting Wigglers at Diamond”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC179, pp. 3323-3325. 
[n]	A. Jansson, M. Lindroos, M. Martini, and K. Schindl, “Study of Emittance Blow-Up Sources between The PS Booster and the 26 GeV PS”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP05C, pp. 2111-2113. 
[n]	R. Roux et al., “Experimental Results on the PHIL Photo-injector Test Stand at LAL”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB013, pp. 198-200. 
[n]	Y. T. Huang, C.-C. Chang, C. L. Chen, J.-R. Chen, G.-Y. Hsiung, and H. P. Hsueh, “Design and Manufacture of TPS BPM Diamond-Edge Gasket”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD023, pp. 2549-2551. 
[n]	J. A. Dobbing et al., “Diamond Booster Magnet Power Converters”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS124, pp. 2664-2666. 
[n]	E. M. Laziev and G. G. Oxuzian, “Radio-Frequency Radiation of High Energy Electrons”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper THP0027, pp. 400-402. 
[n]	N. Suradet, Ch. Dhammatong, S. Klinkhieo, P. Klysubun, and C. P. Preecha, “Web Based Machine Status Display for the Siam Photon Source”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper FPO028, pp. 213-215. 
[n]	E. Y. Wildner, F. Borgnolutti, F. Cerutti, M. Mauri, A. Mereghetti, and E. Todesco, “Parametric Study of Energy Deposition in the LHC Inner Triplet for the Phase 1 Upgrade”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP032, pp. 2590-2592. 
[n]	Y. Cai et al., “Decoupling Schemes for the SSC Collider”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 203-206. 
[n]	G. Asova, P. Castro, S. Khodyachykh, M. Krasilnikov, F. Loehl, and F. Stephan, “Phase Space Tomography Diagnostics at the PITZ Facility”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper WEPPP07, pp. 194-197. 
[n]	L. K. Jensen et al., “Overview of LINAC4 Beam Instrumentation Software”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC111, pp. 374-377. 
[n]	T. T. Thakker et al., “Bunch Train Characterisation for an Infra-red FEL Driven by an Energy Recovery Linac”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA050, pp. 786-788. 
[n]	M. Bozzolan et al., “Improvements on the LHC Interlock BPM system”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4661-4664. doi:10.18429/JACoW-IPAC2023-THPL090
[n]	S. T. Page, Q. King, and Z. Zaharieva, “Automatic Inventory and Configuration Management Tools for the LHC Power Converter Controls”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUA004, pp. 55-57. 
[n]	J. Tan, M. Ludwig, L. Soby, M. Sordet, and M. Wendt, “Commissioning of the CERN Linac4 BPM System with 50 MeV Proton Beams”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA037, pp. 750-752. 
[n]	W. An, C. Joshi, W. Lu, W. B. Mori, M. J. Hogan, and C. Huang, “Preliminary Simulations of Plasma Wakefield Accelerator Experiments at FACET”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP016, pp. 136-138. 
[n]	E. I. Simakov, C. H. Boulware, and T. L. Grimm, “Design of a Superconducting Photonic Band Gap Structure Cell”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP042, pp. 178-180. 
[n]	G. D. Alton, J. Dellwo, R. F. Welton, and D. N. Smithe, “Computational Studies for an Advanced Design ECR Ion Source”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPC12, pp. 1022-1024. 
[n]	P. J. Spiller et al., “Status of the FAIR Project”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 63-68. doi:10.18429/JACoW-IPAC2018-MOZGBF2
[n]	H. Fadil, M. Grieser, A. Wolf, and R. von Hahn, “Finite Elements Calculations of the Lattice and Ring Acceptance of the Heidelberg CSR”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH018, pp. 1960-1962. 
[n]	J. H. Hetzel, U. Bechstedt, J. B?Âker, A. Lehrach, B. Lorentz, and R. T?Âlle, “Towards Beam-Dynamics Simulations Including More Realistic Field Descriptions for the HESR”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 847-849. doi:10.18429/JACoW-IPAC2016-MOPOY002
[n]	Z. Zaharieva, S. Jensen, J. Rolland Lopez De Coca, and A. Romero Marin, “Advantages and Challenges to the Use of On-line Feedback in CERN's Accelerators Controls Configuration Management”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC025, pp. 600-603. 
[n]	R. Takai, T. Honda, T. Nogami, T. Obina, Y. Tanimoto, and M. Tobiyama, “A New Stripline Kicker for PF-AR Transverse Feedback Damper”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 344-347. doi:10.18429/JACoW-IBIC2016-TUPG13
[n]	M. T. Heron et al., “The Diamond Light Source Control System”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH113, pp. 3068-3070. 
[n]	Y. Liu et al., “Laser Wire Based Parallel Profile Scan of H- Beam at the Superconducting Linac of Spallation Neutron Source”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THOAB101, pp. 3090-3092. 
[n]	T. Toyama et al., “New Design of a Tapered-Coupler BPM Toward Simpler Geometry and Flatter Frequency Response”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 237-239. doi:10.18429/JACoW-IBIC2017-TUPCF13
[n]	X. Y. Li, Y. Jiao, H. H. Lu, and S. K. Tian, “Status of HEPS Insertion Devices Design”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 339-341. doi:10.18429/JACoW-IPAC2021-MOPAB090
[n]	B. Fernandez Adiego, E. Blanco Vinuela, and I. Prieto Barreiro, “UNICOS CPC6: Automated Code Generation for Process Control Applications”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKS033, pp. 871-874. 
[n]	Y. Wei, Z. Duan, X. Y. Huang, and Y. Jiao, “Status of Time-Domain Simulation for the Fast Orbit Feedback System at the HEPS”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4311-4313. doi:10.18429/JACoW-IPAC2021-THPAB258
[n]	J. Serrano, P. ?ülvarez, D. Dom?¡nguez, and J. Lewis, “Nanosecond Level UTC Timing Generation and Stamping in CERN's LHC”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP533, pp. XX-XX. 
[n]	R. J. Rushton et al., “Diamond Storage Ring Magnet Power Converters”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS125, pp. 2667-2669. 
[n]	M. Kawase, T. Ishiyama, and H. Takahashi, “Development of the Event Notice Function for PLC”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH118, pp. 3080-3082. 
[n]	A. J. Dobbs, A. Alekou, and K. R. Long, “The MICE Muon Beamline and Induced Host Accelerator Beam Loss”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP021, pp. 148-150. 
[n]	P. ?ülvarez, D. Dom?¡nguez, J. Lewis, Q. King, J. Serrano, and B. Todd, “PLL Usage in the General Machine Timing System for the LHC”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP532, pp. XX-XX. 
[n]	Y. S. Chernousko, P. Hamadyk, and M. T. Heron, “Review of the Diamond Light Source Timing System”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper WECHB02, pp. 144-146. 
[n]	A. Galat?â, C. S. Gallo, D. Mascali, and G. Torrisi, “Numerical Simulations of Magnetically Confined Plasmas”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 152-156. doi:10.18429/JACoW-ECRIS2018-TUP27
[n]	M. Ferrario, L. Serafini, and F. Tazzioli, “Multi-Bunch Dynamics in Accelerating Strucures Including Interaction with Higher Order Modes”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3279-3282. 
[n]	J. Miyamatsu, H. Ono, M. Washio, H. Iijima, and K. Sakaue, “Study on Improving Durability of Bialkali Photocathode for an RF-Gun with the CsBr Protective Layer”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4310-4312. doi:10.18429/JACoW-IPAC2018-THPMK009
[n]	K. J. Beczek, J. W. Lewellen, A. Nassiri, and E. Tanabe, “A Rationalized Approach to Thermionic RF Gun Design”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH052, pp. 2206-2208. 
[n]	B. Giaccone, “LCLS-II HE vCM Test Results: Newly Developed N-Doping Treatment and Plasma Processing”, presented at the NAPAC'22, Albuquerque, NM, USA, Aug. 2022, paper MOYE2, unpublished. 
[n]	R. Appleby, A. Apyan, L. C. Deacon, and E. Gschwendtner, “CLIC Post-Collision Line Luminosity Monitoring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC027, pp. 1057-1059. 
[n]	A. Y. Orlov, P. N. Alekseev, S. V. Barabin, and D. A. Liakin, “Universal Timer Module for the Timing System of the Accelerating-Storage Complex ITEP-TWAC”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper WEPSB042, pp. 269-271. 
[n]	L. O. Dallin and D. G. Bilbrough, “Modelling of Elliptically Polarizing Undulators”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD004, pp. 3087-3089. 
[n]	J. P. Sikora, M. G. Billing, J. A. Crittenden, Y. Li, M. A. Palmer, and S. De Santis, “Time Resolved Measurement of Electron Clouds at CesrTA using Shielded Pickups”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP195, pp. 1855-1857. 
[n]	G. A. Amatuni et al., “AREAL 50 MeV Electron Accelerator Project for THz and Middle IR FEL”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1355-1357. doi:10.18429/JACoW-IPAC2017-TUPAB020
[n]	C. Sun et al., “Development of a Decoherence Kicker for the ALS Upgrade Project (ALS-U)”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 414-416. doi:10.18429/JACoW-IPAC2021-MOPAB114
[n]	S. Kato, S. Azuma, M. Nishiwaki, P. V. Tyagi, and F. Yamamoto, “Application of Electrochemical Buffing onto Niobium SRF Cavity Surface”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC018, pp. 2929-2931. 
[n]	K. Umemori, T. Furuya, H. Sakai, M. Sawamura, and K. Shinoe, “Observation of Resonance Mode in Coaxial-type Input Coupler”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC031, pp. 2959-2961. 
[n]	C. Limborg-Deprey et al., “An X-band Gun Test Area at SLAC”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP015, pp. 133-135. 
[n]	A. Farricker, R. M. Jones, and S. Molloy, “Implications of Manufacturing Errors on Higher Order Modes and on Beam Dynamics in the ESS Linac”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 514-517. doi:10.18429/JACoW-IPAC2015-MOPJE083
[n]	S. Hiroki et al., “Multi-wire Profile Monitor for J-PARC 3GeV RCS”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC036, pp. 1131-1133. 
[n]	R. Takai, T. Honda, T. Obina, H. Sagehashi, and M. Tadano, “Beam Diagnostics for New Beam Transport Line of PF-AR”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 112-116. doi:10.18429/JACoW-IBIC2017-MOPWC06
[n]	R. B. Saethre, D. E. Anderson, C. Deibele, V. V. Peplov, and M. P. Stockli, “Development and Operation of the SNS Fast Chopper Systems”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper FRYBB2, pp. 1473-1477. 
[n]	R. Bailey et al., “Synchrotron Radiation Effects at LEP”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP01H, pp. 385-387. 
[n]	P. Sudmuang et al., “Photon Beam Position Monitor at SIAM Photon Source”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOPA24, pp. 104-106. 
[n]	B. Grigoryan et al., “Advanced Research Electron Accelerator Laboratory Based on Photocathode RF Gun”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC031, pp. 1066-1068. 
[n]	A. Andersson et al., “Recent Accelerator Development at MAXlab”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP24G, pp. 577-578. 
[n]	M. M. Dehler et al., “Design Concept for a THz Driven Streak Camera With Ultra High Resolution”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 156-160. doi:10.18429/JACoW-IBIC2015-MOPB048
[n]	J. Bosser, M. Chanel, R. Ley, and G. Tranquille, “Variable Energy Electron Cooling at LEAR”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 845-848. 
[n]	H. Hahn and L. R. Hammons, “Radial Transmission Line Analysis of Multi-layer Circular Structures”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP177, pp. 1819-1821. 
[n]	H. C. Chen et al., “A Gun to Linac Operation Analysis of the Taiwan Light Source Injector”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWA052, pp. 2235-2237. 
[n]	S. V. Khruschev et al., “9 Tesla Superbend for BESSY-2”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP14005, pp. XX-XX. 
[n]	M. Sachwitz, P. Castro, H.-J. Grabosch, U. Hahn, and H. Thom, “Wire Scanners in the Undulator Section of the VUV-FEL DESY”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POT027, pp. XX-XX. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search