Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] P. J. M. van der Slot, S. Biedron, and S. V. Milton, “Design of a Resonator for the CSU THz FEL”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper WEPSO89, pp. 719-722.
[n] W. Liu et al., “Different scenarios for generating coherent THz radiation based on a compact electron accelerator”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPG77, unpublished.
[n] N. Mounet, E. Métral, and G. Rumolo, “Simulation of Multibunch Motion with the HEADTAIL Code and Application to the CERN SPS and LHC”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS075, pp. 778-780.
[n] R. Maas and Y. Y. Wu, “Optical Design of the Electron Pulse Stretcher Facility AmPs”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1488-1491.
[n] E. Pace, G. Di Pirro, and S. Fioravanti, “PostgreSQL Usage within the SPARC Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP043, pp. 750-752.
[n] J. Alessi et al., “Polarized H- Ion Source Performance During the 2003 RHIC Run”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB001, pp. 3282-3284.
[n] D. C. Plostinar, “RF Design Options for a 180 MeV H- Linac for Megawatt Beam Facilities”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN114, pp. 1643-1645.
[n] N. Juntong and R. M. Jones, “High Gradient Superconducting Cavity with Low Surface EM Fields and Well-suppressed HOMs for The ILC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC053, pp. 3010-3012.
[n] R. Valdiviez et al., “The Mechanical Design of a Proton Microscope for Radiography at 800 MeV”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB020, pp. 1664-1666.
[n] O. Piquet and M. Luong, “Modelling and Simulation of the RF System for SPIRAL2”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP070, pp. 2168-2170.
[n] R. Maier and U. Pfister, “COSY-J??lich - A Synchrotron and Storage Ring for Medium Energy Physics”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper VII-03, pp. 282-285.
[n] F. Zimmermann, G. Arduini, and C. Carli, “Localizing Impedance Sources from Betatron-phase Beating in the CERN SPS”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT046, pp. 1939-1941.
[n] G. Geloni, V. Kocharyan, and E. Saldin, “Control of the Amplification Process in Baseline XFEL Undulators With Mechanical SASE Switchers”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper THPA02, pp. 570-573.
[n] D. Li, A. S. Ladran, D. Lozano, and R. A. Rimmer, “Mechanical and Thermal Analysis of Beryllium Windows for RF Cavities in a Muon Cooling Channel”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPDO009, pp. 2163-2165.
[n] T. Watanabe et al., “An Experimental Test of Superradiance in a Single Pass Seeded FEL”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THPP032, pp. XX-XX.
[n] G. Stupakov, “A Novel One-Dimensional Model for CSR Wakefields”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 669-672. doi:10.18429/JACoW-FEL2019-THP037
[n] Y. Sun, “Advanced Photon Source Injection Related Simulation and Measurement”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1806-1808. doi:10.18429/JACoW-IPAC2015-TUPJE072
[n] M. M. Rihaoui, W. Gai, P. Piot, and J. G. Power, “Limiting Effects in the Transverse-to-Longitudinal Emittance Exchange Technique for Low Energy Relativistic Electron Beams”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP087, pp. 3907-3909.
[n] R. Corsini et al., “First Experiments at the CLEAR User Facility”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4066-4069. doi:10.18429/JACoW-IPAC2018-THPMF014
[n] M. Venturini et al., “Studies of a Linac Driver for a High Repetition Rate X-ray FEL”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP180, pp. 2450-2452.
[n] R. L. Martin, “Comments on Superconducting Synchrotrons”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 632-634.
[n] M. Inoue, I. Miura, and A. Shimizu, “Cascade Cyclotron Magnet”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1104-1107.
[n] A. Burns, B. Halvarsson, H. Jakob, and H. Schmickler, “Noise Reduction on the LEP Bunch Current Measurement System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2P058, pp. 2026-2028.
[n] X. L. Wu et al., “The Manufacturing of the CSNS DTL Tank”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 167-170. doi:10.18429/JACoW-LINAC2018-MOPO080
[n] J. Branlard et al., “Capture Cavity II Results at FNAL”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN092, pp. 2245-2247.
[n] J. S. Oh et al., “Efficiency Analysis of the First 111-MW C-Band Klystron-Modulator for Linear Collider”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D032, pp. 163-165.
[n] J. Claus, “Reduction of Losses in Linacs for Protons or Heavy Ions”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1098-1101.
[n] A. C. de Lira, P. Bellomo, K. Luchini, and D. Macnair, “The DC-Magnet Power Supplies for the LCLS Injector”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS070, pp. 590-592.
[n] S. Molloy, G. R. White, and M. Woodley, “A Flight Simulator Based Beam Based Alignment Package for ATF2”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP024, pp. 4817-4819.
[n] Y. Zhang, F. Caspers, T. Katayama, F. Nolden, L. Thorndahl, and J. X. Wu, “An Improved Forward Travelling Wave Structure Design for Stochastic Cooling at Experimental Cooler Storage Ring (CSRe) at the Institute of Modern Physics (IMP) in China”, in Proc. COOL'11, Alushta, Ukraine, Sep. 2011, paper TUPS16, pp. 132-135.
[n] L. M. Russo and J. V. Ferreira Filho, “Gateware and Software Frameworks for Sirius BPM Electronics”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 84-87. doi:10.18429/JACoW-PCAPAC2016-THDAPLCO03
[n] M. Sawamura et al., “Fabrication of Superconducting Spoke Cavity for Laser Compton Scattered Photon Sources”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2177-2179. doi:10.18429/JACoW-IPAC2016-WEPMB025
[n] M. G. Ibison, K. M. Hock, D. J. Holder, and M. Korostelev, “Development of Tomographic Reconstruction Methods for Studies of Transverse Phase Space in the EMMA FFAG Injection Line”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD031, pp. 4346-4348.
[n] A. A. Rossi et al., “Nb3Sn Films by Multilayer Sputtering”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUOBAU06, pp. 149-154.
[n] J. Bonofiglio, S. Alfredson, S. Hitchcock, F. Marti, A. Rodriguez, and G. Stork, “Stripper Foil Mechanism for the K1200 Superconducting Cyclotron”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P2-04, pp. XX-XX.
[n] R. L. Martin, “The ACCTEK Proton Medical Accelerator and Beam Delivery System for Cancer Therapy and Radiography”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1802-1805.
[n] M. G. Fedurin et al., “Commissioning and Operation of an Ultrafast Electron Diffraction Facility as Part of the ATF-II Upgrade at Brookhaven National Laboratory”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 554-556. doi:10.18429/JACoW-IPAC2017-MOPIK026
[n] B. Barquest et al., “Development and Installation of the CANREB RFQ Buncher at TRIUMF”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3914-3916. doi:10.18429/JACoW-IPAC2018-THPAL116
[n] S. Franke et al., “Integration of the Moment-Based Beam-Dynamics Simulation Tool V-Code into the S-DALINAC Control System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMN002, pp. 235-238.
[n] G. Geloni, V. Kocharyan, E. Saldin, E. Schneidmiller, and M. V. Yurkov, “Theory of Edge Radiation. Part II: Advanced Applications and Impact on XFEL Setups”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper WEPC02, pp. 492-495.
[n] A. Young, J. E. Dusatko, S. L. Hoobler, J. J. Olsen, T. Straumann, and C. Kim, “Performance Measurements of the New X-Band Cavity BPM Receiver”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPC24, pp. 735-738.
[n] I. Hofmann, D. Boehne, K. Beckert, A. Jahnke, and R. W. Mueller, “Improvements on the HIBALL Heavy Ion Fusion Driver”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3070-3073.
[n] M. S. Zisman and T. M. Himel, “Commissioning of the PEP-II Low-Energy Ring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEAR5, pp. 293-295.
[n] N. Baboi et al., “New Electron Beam Diagnostics in the FLASH Dump Line”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM093, pp. 420-424.
[n] J. Irwin, “Computation of Lattice Maps Using Modular BCH and Similarity Composition Rules”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAC18, pp. 2871-2873.
[n] D. V. Neuffer, Y. I. Alexahin, M. A. Palmer, C. M. Ankenbrandt, and J.-P. Delahaye, “A Muon Collider as a Higgs Factory”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPFI056, pp. 1472-1474.
[n] A. F. G. van der Meer, “Hole-coupling in IR FELs: An Experimental Study”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper WEPD40, pp. 456-459.
[n] H. Padamsee, M. Banner, and M. Tigner, “Suppression of Multipactoring in Superconducting Cavities”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1101-1104.
[n] R. Brinkmann, “HERA Status and Plans”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPG04, pp. 406-410.
[n] N. A. Towne, H. Ma, and J. Rose, “Linear-Quadratic-Gaussian Controllers for Single-Frequency RF Systems and Short Bunches in NSLS-II”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP068, pp. 2162-2164.
[n] M. Lamont et al., “The SPS Beam Dump Facility”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2389-2391. doi:10.18429/JACoW-IPAC2017-TUPVA126
[n] J. A. Holmes, S. M. Cousineau, T. V. Gorlov, M. A. Plum, and N. J. Evans, “Progress Toward a Self-Consistent Beam at the Spallation Neutron Source”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3382-3384. doi:10.18429/JACoW-IPAC2018-THPAK067
[n] G. A. Westenskow, F. M. Bieniosek, D. P. Grote, and J. W. Kwan, “A Multi-beamlet Injector for Heavy Ion Fusion: Experiments and Modeling”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRYAB01, pp. 3777-3781.
[n] G. Besnier, “Resonant Proton Beam Depolarisation in a Synchrocyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69H10, pp. XX-XX.
[n] C. Serpico, I. Cudin, and A. Grudiev, “Development of an High Gradient, S-band, Accelerating Structure for the FERMI Linac”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 136-138. doi:10.18429/JACoW-LINAC2016-MOPLR004
[n] G. Penn, P. Emma, G. Marcus, J. Qiang, and M. W. Reinsch, “Simulation Studies of FELs for a Next Generation Light Source”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper WEPSO48, pp. 609-613.
[n] Y. L. Qian et al., “Beam Parameter Measurements for the APS Linac System”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-82, pp. 899-901.
[n] G. Geloni, V. Kocharyan, and E. Saldin, “Theoretical Computation of the Polarization Characteristics of an X-Ray Free-Electron Laser with Planar Undulator”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 38-42. doi:10.18429/JACoW-FEL2015-MOP008
[n] Y. D. Liu, L. Huang, and S. Wang, “Coupling Impedance Measurements of Extraction Kicker in CSNS/RCS”, in Proc. SAP'14, Lanzhou, China, Aug. 2014, paper THAMH4, pp. 102-105.
[n] S. C. Leemann and L. O. Dallin, “Progress on Pulsed Multipole Injection for the MAX IV Storage Rings”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPSM05, pp. 1052-1054.
[n] W. Hartung et al., “Design Improvement of the RIA 80.5 MHz RFQ”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP03, pp. 599-601.
[n] W. Hartung et al., “Production Cavities and Cryomodules for a Heavy Ion Re-accelerator at Michigan State University”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO011, pp. 201-204.
[n] B. Buonomo, D. G. C. Di Giulio, L. G. Foggetta, and P. Valente, “The Frascati LINAC Beam-Test Facility (BTF) Performance and Upgrades”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 395-398. doi:10.18429/JACoW-IBIC2016-TUPG29
[n] K. Saito, H. Inoue, H. Ao, and N. Satoh, “Stainless Flange Bonded to Niobium Tube and Simple Aluminum Sealing”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PT020, pp. XX-XX.
[n] L. Wang, A. Chao, and J. Wei, “Geometric Effects on Electron Cloud”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS081, pp. 4243-4245.
[n] J. C. Dooling, K. C. Harkay, Y. Ivanyushenkov, V. Sajaev, A. Xiao, and A. Vella, “Calibration of Fast Fiber-Optic Beam Loss Monitors for the Advanced Photon Source Storage Ring Superconducting Undulators”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1780-1783. doi:10.18429/JACoW-IPAC2015-TUPJE064
[n] T. Tajima et al., “Studies on the Effect of Coating Nb with Thin Layers of Another Superconductor such as NbN and MgB2”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP038, pp. 2079-2079.
[n] M. Aiba, M. B?Âge, T. Garvey, N. Milas, A. Saa Hernandez, and A. Streun, “Extraction Beam Line for Light Sources”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWA051, pp. 2232-2234.
[n] F. Burkart et al., “Diamond Particle Detector Properties during High Fluence Material Damage Tests and their Future Applications for Machine Protection in the LHC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPEA047, pp. 3249-3251.
[n] J. Shi et al., “Design of a Choke-mode Damped Accelerating Structure for CLIC Main Linac”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC021, pp. 113-115.
[n] S. Reiche, P. Emma, and C. Pellegrini, “Pulse Length Control in an X-Ray FEL by Using Wakefields”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOAC010, pp. 211-213.
[n] J. Y. Ma and G. Huang, “Microphonics Simulation and Parameters Design of the SRF Cavities for CiADS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2903-2905. doi:10.18429/JACoW-IPAC2019-WEPRB044
[n] J. R. J. Bennett, “The Production and Acceleration of Heavy Ions in the Harwell Variable Energy Cyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69E08, pp. XX-XX.
[n] H. Kim, “Regenerative Beam Extraction”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper B-002, pp. XX-XX.
[n] J. Alessi, “High Current Polarized Proton Sources”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE4-04, pp. 465-469.
[n] O. I. Drivotin and D. A. Starikov, “Investigation of a Second Order Method of RFQ Channel Optimization”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 241-244. doi:10.18429/JACoW-RUPAC2016-TUPSA013
[n] S. Rimjaem et al., “Emittance for Different Bunch Charges at the Upgraded PITZ Facility”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper THPA06, pp. 473-476.
[n] V. S. Morozov, Y. S. Derbenev, J. Guo, A. Hutton, and Y. Zhang, “Study of Beam Synchronization at JLEIC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2463-2465. doi:10.18429/JACoW-IPAC2016-WEPMW019
[n] W. Barry, J. Byrd, J. Corlett, J. Johnson, G. Lambertson, and J. Fox, “Commissioning of the ALS Transverse Coupled-Bunch Feedback System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAE13, pp. 2423-2425.
[n] J. A. Crittenden, M. A. Palmer, and D. L. Rubin, “Wiggler Magnet Design Development for the ILC Damping Rings”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR065, pp. 1969-1971.
[n] R. Xiang et al., “A Step Closer to the CW High Brilliant Beam with the ELBE SRF-Gun-II”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1456-1458. doi:10.18429/JACoW-IPAC2015-TUPWA023
[n] Y. Papaphilippou, L. Farvacque, J. Laskar, and A. Ropert, “Probing the Non-Linear Dynamics of the ESRF Storage Ring with Experimental Frequency Maps”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPG007, pp. 3189-3191.
[n] L. N. Drosdal et al., “Investigations of SPS Orbit Drifts”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 852-854. doi:10.18429/JACoW-IPAC2014-MOPRI100
[n] T. K. Khoe, J. J. Livingood, and W. J. Ramler, “Proposed Midwest Tandem Cyclotron (MTC)”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69A04, pp. XX-XX.
[n] H.-J. Eckoldt, F. Faubladier, and N. Heidbrook, “Constant-Power Power Supplies for the TESLA Modulators”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP3B08, pp. 2199-2201.
[n] F. Selph, A. Jackson, and M. S. Zisman, “Injection System Design for the LBL 1-2 GeV Synchrotron Radiation Source”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 446-449.
[n] D. Pellegrini, M. E. Biagini, and S. Guiducci, “Beam Dynamics Studies for the Injection System of a High Luminosity Flavour Factory”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPME008, pp. 1577-1579.
[n] O. K. Kester, “High Intensity Issues at FAIR”, in Proc. HB'12, Beijing, China, Sep. 2012, paper MOI1B01, pp. 11-14.
[n] P. Craievich et al., “Consolidation and Extension of the High-gradient LINAC RF Technology at PSI”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 937-940. doi:10.18429/JACoW-LINAC2018-THPO115
[n] G. Horikoshi, T. Kubo, H. Mizuno, K. Satoh, and H. Watanabe, “Vacuum System for the KEK Proton Synchrotron”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1290-1293.
[n] P.-E. Bernaudin, R. Ferdinand, P. Bosland, Y. Gomez, and G. Olry, “Assembling, Testing and Installing the SPIRAL2 Superconducting Linac”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO001, pp. 3752-3754.
[n] G. V. Eremeev, A-M. Valente-Feliciano, A. T. Wu, and D. Gu, “Exploring the Effect of AL2O3 ALD Coating on a High Gradient ILC Single-Cell Cavity”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC096, pp. 2441-2443.
[n] S. L. Hoobler, S. C. Alverson, C. Cyterski, and R. C. Sass, “Upgrades to Control Room Knobs at Slac National Accelerator Laboratory”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 177-179. doi:10.18429/JACoW-ICALEPCS2015-MOPGF037
[n] R. K. Buckley et al., “Vertical Test Facility for Superconducting RF Cavities at Daresbury Laboratory”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO008, pp. 365-367.
[n] J. Plouin et al., “CEA Experience and Effort to Limit Magnetic Flux Trapping in Superconducting Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB100, pp. 847-851.
[n] Z. Li et al., “Progress on the Physics Design of the C-ADS Injector Scheme I”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO043, pp. 3863-3865.
[n] K. S. B. Li et al., “Modelling and Studies for a Wideband Feedback System for Mitigation of Transverse Single Bunch Instabilities”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME042, pp. 3019-3021.
[n] A. E. Levichev, Y. D. Chernousov, V. Ivannikov, V. M. Pavlov, and I. V. Shebolaev, “Prototype of Parallel Coupled Accelerating Structure”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP093, pp. 2737-2739.
[n] M. Cornacchia, S. Di Mitri, G. Penco, and A. Zholents, “Formation of Electron Bunches for Harmonic Cascade X-ray Free Electron Lasers”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THOPA01, pp. 2738-2740.
[n] Y. T. Ding, P. Emma, and Z. Huang, “Integration of the Optical Replica Ultrashort Electron Bunch Diagnostics with the Current-Enhanced SASE in the LCLS”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMS046, pp. 1293-1295.
[n] J. M. Weber and M. J. Chin, “ALS FPGA-based Transverse Feedback Electronics”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper TUPTPF017, pp. 130-132.
[n] L. J. Kibbe, J. A. Jungerman, and N. F. Peek, “Central Region Studies for Incorporating an Axial Ion Source in the Davis 76 - Inch Cyclotron”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper A-003, pp. XX-XX.
[n] S. Anderson et al., “First Operation of the Upgraded SLAC A-Line”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP110G, pp. 2468-2470.
[n] N. Ouchi et al., “Cold Test of 600 MHz Superconducting Cryomodule for High Intensity Proton Linac”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU474, pp. 488-490.
[n] A. Hofmann, K. Hubner, and B. Zotter, “A Computer Code for the Calculation of Beam Stability in Circular Electron Machines”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3514-3517.
[n] M. Gross et al., “Laser Pulse Train Management with an Acousto-optic Modulator”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper MOPD61, pp. 189-192.
[n] J. Halbritter, “Electro- or Chemical- Polishing and UHV Baking of Superconducting rf Nb Cavities and Q(H) Dependencies”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper THPO004, pp. 695-697.
[n] C. Arcambal et al., “Conditioning of the First Mass Production Power Couplers for the ESS Elliptical Cavities”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 288-292. doi:10.18429/JACoW-SRF2019-MOP086
[n] K. Yokoyama et al., “High-Gradient RF Breakdown Studies with Narrow Waveguide”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP028, pp. 879-881.
[n] O. Mete Apsimon, R. Apsimon, G. Burt, S. Doebert, and G. X. Xia, “S-Band Booster Design and Emittance Preservation for the Awake e-Injector”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 449-451. doi:10.18429/JACoW-LINAC2016-TUPRC016
[n] Y. Ogawa, “Commissioning of the KEKB Linac”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper WE2005, pp. 711-718.
[n] K. M. Baptiste et al., “ALS Top-Off Mode Beam Interlock System”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE4GRC06, pp. 1979-1981.
[n] Y. Kawashima et al., “Instabilities Related with RF Cavity in the Booster Synchrotron for NSLS-II”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA078, pp. 2669-2671.
[n] R. A. de Forest, “The Cyclotron and the Computer: A Look at the Present and the Future”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69B01, pp. XX-XX.
[n] E. Gianfelice-Wendt et al., “SPS Beam Steering for LHC Extraction”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2106-2108. doi:10.18429/JACoW-IPAC2014-WEPRO068
[n] K. Zhu et al., “Design and Commissioning of a CW Heavy Ion RFQ Accelerator”, in Proc. SAP'14, Lanzhou, China, Aug. 2014, paper THAMH5, pp. 106-109.
[n] Y. Yamazaki, “J-PARC Status”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO2BCI03, pp. 18-22.
[n] S. Werin et al., “An Electron Gun Test Stand to Prepare for the MAX IV Project”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD065, pp. 1551-1553.
[n] M. A. Kemp, “Solid State Marx Modulators for Emerging Applications”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper WE2A02, pp. 743-747.
For LaTeX
Use Complete Form
For BibTeX
References
- P. J. M. van der Slot, S. Biedron, and S. V. Milton, “Design of a Resonator for the CSU THz FEL”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper WEPSO89, pp. 719-722.
- W. Liu et al., “Different scenarios for generating coherent THz radiation based on a compact electron accelerator”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPG77, unpublished.
- N. Mounet, E. Métral, and G. Rumolo, “Simulation of Multibunch Motion with the HEADTAIL Code and Application to the CERN SPS and LHC”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS075, pp. 778-780.
- R. Maas and Y. Y. Wu, “Optical Design of the Electron Pulse Stretcher Facility AmPs”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1488-1491.
- E. Pace, G. Di Pirro, and S. Fioravanti, “PostgreSQL Usage within the SPARC Control System”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP043, pp. 750-752.
- J. Alessi et al., “Polarized H- Ion Source Performance During the 2003 RHIC Run”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAB001, pp. 3282-3284.
- D. C. Plostinar, “RF Design Options for a 180 MeV H- Linac for Megawatt Beam Facilities”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAN114, pp. 1643-1645.
- N. Juntong and R. M. Jones, “High Gradient Superconducting Cavity with Low Surface EM Fields and Well-suppressed HOMs for The ILC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEC053, pp. 3010-3012.
- R. Valdiviez et al., “The Mechanical Design of a Proton Microscope for Radiography at 800 MeV”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB020, pp. 1664-1666.
- O. Piquet and M. Luong, “Modelling and Simulation of the RF System for SPIRAL2”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP070, pp. 2168-2170.
- R. Maier and U. Pfister, “COSY-J??lich - A Synchrotron and Storage Ring for Medium Energy Physics”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper VII-03, pp. 282-285.
- F. Zimmermann, G. Arduini, and C. Carli, “Localizing Impedance Sources from Betatron-phase Beating in the CERN SPS”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT046, pp. 1939-1941.
- G. Geloni, V. Kocharyan, and E. Saldin, “Control of the Amplification Process in Baseline XFEL Undulators With Mechanical SASE Switchers”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper THPA02, pp. 570-573.
- D. Li, A. S. Ladran, D. Lozano, and R. A. Rimmer, “Mechanical and Thermal Analysis of Beryllium Windows for RF Cavities in a Muon Cooling Channel”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPDO009, pp. 2163-2165.
- T. Watanabe et al., “An Experimental Test of Superradiance in a Single Pass Seeded FEL”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper THPP032, pp. XX-XX.
- G. Stupakov, “A Novel One-Dimensional Model for CSR Wakefields”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 669-672.
- Y. Sun, “Advanced Photon Source Injection Related Simulation and Measurement”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1806-1808.
- M. M. Rihaoui, W. Gai, P. Piot, and J. G. Power, “Limiting Effects in the Transverse-to-Longitudinal Emittance Exchange Technique for Low Energy Relativistic Electron Beams”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6PFP087, pp. 3907-3909.
- R. Corsini et al., “First Experiments at the CLEAR User Facility”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4066-4069.
- M. Venturini et al., “Studies of a Linac Driver for a High Repetition Rate X-ray FEL”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP180, pp. 2450-2452.
- R. L. Martin, “Comments on Superconducting Synchrotrons”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 632-634.
- M. Inoue, I. Miura, and A. Shimizu, “Cascade Cyclotron Magnet”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1104-1107.
- A. Burns, B. Halvarsson, H. Jakob, and H. Schmickler, “Noise Reduction on the LEP Bunch Current Measurement System”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2P058, pp. 2026-2028.
- X. L. Wu et al., “The Manufacturing of the CSNS DTL Tank”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 167-170.
- J. Branlard et al., “Capture Cavity II Results at FNAL”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN092, pp. 2245-2247.
- J. S. Oh et al., “Efficiency Analysis of the First 111-MW C-Band Klystron-Modulator for Linear Collider”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D032, pp. 163-165.
- J. Claus, “Reduction of Losses in Linacs for Protons or Heavy Ions”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1098-1101.
- A. C. de Lira, P. Bellomo, K. Luchini, and D. Macnair, “The DC-Magnet Power Supplies for the LCLS Injector”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS070, pp. 590-592.
- S. Molloy, G. R. White, and M. Woodley, “A Flight Simulator Based Beam Based Alignment Package for ATF2”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP024, pp. 4817-4819.
- Y. Zhang, F. Caspers, T. Katayama, F. Nolden, L. Thorndahl, and J. X. Wu, “An Improved Forward Travelling Wave Structure Design for Stochastic Cooling at Experimental Cooler Storage Ring (CSRe) at the Institute of Modern Physics (IMP) in China”, in Proc. 8th Workshop on Beam Cooling and Related Topics (COOL'11), Alushta, Ukraine, Sep. 2011, paper TUPS16, pp. 132-135.
- L. M. Russo and J. V. Ferreira Filho, “Gateware and Software Frameworks for Sirius BPM Electronics”, in Proc. 11th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'16), Campinas, Brazil, Oct. 2016, pp. 84-87.
- M. Sawamura et al., “Fabrication of Superconducting Spoke Cavity for Laser Compton Scattered Photon Sources”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2177-2179.
- M. G. Ibison, K. M. Hock, D. J. Holder, and M. Korostelev, “Development of Tomographic Reconstruction Methods for Studies of Transverse Phase Space in the EMMA FFAG Injection Line”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD031, pp. 4346-4348.
- A. A. Rossi et al., “Nb3Sn Films by Multilayer Sputtering”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUOBAU06, pp. 149-154.
- J. Bonofiglio, S. Alfredson, S. Hitchcock, F. Marti, A. Rodriguez, and G. Stork, “Stripper Foil Mechanism for the K1200 Superconducting Cyclotron”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P2-04, pp. XX-XX.
- R. L. Martin, “The ACCTEK Proton Medical Accelerator and Beam Delivery System for Cancer Therapy and Radiography”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1802-1805.
- M. G. Fedurin et al., “Commissioning and Operation of an Ultrafast Electron Diffraction Facility as Part of the ATF-II Upgrade at Brookhaven National Laboratory”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 554-556.
- B. Barquest et al., “Development and Installation of the CANREB RFQ Buncher at TRIUMF”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3914-3916.
- S. Franke et al., “Integration of the Moment-Based Beam-Dynamics Simulation Tool V-Code into the S-DALINAC Control System”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMN002, pp. 235-238.
- G. Geloni, V. Kocharyan, E. Saldin, E. Schneidmiller, and M. V. Yurkov, “Theory of Edge Radiation. Part II: Advanced Applications and Impact on XFEL Setups”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper WEPC02, pp. 492-495.
- A. Young, J. E. Dusatko, S. L. Hoobler, J. J. Olsen, T. Straumann, and C. Kim, “Performance Measurements of the New X-Band Cavity BPM Receiver”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEPC24, pp. 735-738.
- I. Hofmann, D. Boehne, K. Beckert, A. Jahnke, and R. W. Mueller, “Improvements on the HIBALL Heavy Ion Fusion Driver”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3070-3073.
- M. S. Zisman and T. M. Himel, “Commissioning of the PEP-II Low-Energy Ring”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEAR5, pp. 293-295.
- N. Baboi et al., “New Electron Beam Diagnostics in the FLASH Dump Line”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM093, pp. 420-424.
- J. Irwin, “Computation of Lattice Maps Using Modular BCH and Similarity Composition Rules”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAC18, pp. 2871-2873.
- D. V. Neuffer, Y. I. Alexahin, M. A. Palmer, C. M. Ankenbrandt, and J.-P. Delahaye, “A Muon Collider as a Higgs Factory”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPFI056, pp. 1472-1474.
- A. F. G. van der Meer, “Hole-coupling in IR FELs: An Experimental Study”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper WEPD40, pp. 456-459.
- H. Padamsee, M. Banner, and M. Tigner, “Suppression of Multipactoring in Superconducting Cavities”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1101-1104.
- R. Brinkmann, “HERA Status and Plans”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPG04, pp. 406-410.
- N. A. Towne, H. Ma, and J. Rose, “Linear-Quadratic-Gaussian Controllers for Single-Frequency RF Systems and Short Bunches in NSLS-II”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP068, pp. 2162-2164.
- M. Lamont et al., “The SPS Beam Dump Facility”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2389-2391.
- J. A. Holmes, S. M. Cousineau, T. V. Gorlov, M. A. Plum, and N. J. Evans, “Progress Toward a Self-Consistent Beam at the Spallation Neutron Source”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3382-3384.
- G. A. Westenskow, F. M. Bieniosek, D. P. Grote, and J. W. Kwan, “A Multi-beamlet Injector for Heavy Ion Fusion: Experiments and Modeling”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRYAB01, pp. 3777-3781.
- G. Besnier, “Resonant Proton Beam Depolarisation in a Synchrocyclotron”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69H10, pp. XX-XX.
- C. Serpico, I. Cudin, and A. Grudiev, “Development of an High Gradient, S-band, Accelerating Structure for the FERMI Linac”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 136-138.
- G. Penn, P. Emma, G. Marcus, J. Qiang, and M. W. Reinsch, “Simulation Studies of FELs for a Next Generation Light Source”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper WEPSO48, pp. 609-613.
- Y. L. Qian et al., “Beam Parameter Measurements for the APS Linac System”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-82, pp. 899-901.
- G. Geloni, V. Kocharyan, and E. Saldin, “Theoretical Computation of the Polarization Characteristics of an X-Ray Free-Electron Laser with Planar Undulator”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 38-42.
- Y. D. Liu, L. Huang, and S. Wang, “Coupling Impedance Measurements of Extraction Kicker in CSNS/RCS”, in Proc. 12th Symposium on Accelerator Physics (SAP'14), Lanzhou, China, Aug. 2014, paper THAMH4, pp. 102-105.
- S. C. Leemann and L. O. Dallin, “Progress on Pulsed Multipole Injection for the MAX IV Storage Rings”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPSM05, pp. 1052-1054.
- W. Hartung et al., “Design Improvement of the RIA 80.5 MHz RFQ”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper THP03, pp. 599-601.
- W. Hartung et al., “Production Cavities and Cryomodules for a Heavy Ion Re-accelerator at Michigan State University”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO011, pp. 201-204.
- B. Buonomo, D. G. C. Di Giulio, L. G. Foggetta, and P. Valente, “The Frascati LINAC Beam-Test Facility (BTF) Performance and Upgrades”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 395-398.
- K. Saito, H. Inoue, H. Ao, and N. Satoh, “Stainless Flange Bonded to Niobium Tube and Simple Aluminum Sealing”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PT020, pp. XX-XX.
- L. Wang, A. Chao, and J. Wei, “Geometric Effects on Electron Cloud”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS081, pp. 4243-4245.
- J. C. Dooling, K. C. Harkay, Y. Ivanyushenkov, V. Sajaev, A. Xiao, and A. Vella, “Calibration of Fast Fiber-Optic Beam Loss Monitors for the Advanced Photon Source Storage Ring Superconducting Undulators”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1780-1783.
- T. Tajima et al., “Studies on the Effect of Coating Nb with Thin Layers of Another Superconductor such as NbN and MgB2”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP038, pp. 2079-2079.
- M. Aiba, M. B?Âge, T. Garvey, N. Milas, A. Saa Hernandez, and A. Streun, “Extraction Beam Line for Light Sources”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWA051, pp. 2232-2234.
- F. Burkart et al., “Diamond Particle Detector Properties during High Fluence Material Damage Tests and their Future Applications for Machine Protection in the LHC”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPEA047, pp. 3249-3251.
- J. Shi et al., “Design of a Choke-mode Damped Accelerating Structure for CLIC Main Linac”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC021, pp. 113-115.
- S. Reiche, P. Emma, and C. Pellegrini, “Pulse Length Control in an X-Ray FEL by Using Wakefields”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TOAC010, pp. 211-213.
- J. Y. Ma and G. Huang, “Microphonics Simulation and Parameters Design of the SRF Cavities for CiADS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2903-2905.
- J. R. J. Bennett, “The Production and Acceleration of Heavy Ions in the Harwell Variable Energy Cyclotron”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69E08, pp. XX-XX.
- H. Kim, “Regenerative Beam Extraction”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper B-002, pp. XX-XX.
- J. Alessi, “High Current Polarized Proton Sources”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE4-04, pp. 465-469.
- O. I. Drivotin and D. A. Starikov, “Investigation of a Second Order Method of RFQ Channel Optimization”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 241-244.
- S. Rimjaem et al., “Emittance for Different Bunch Charges at the Upgraded PITZ Facility”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper THPA06, pp. 473-476.
- V. S. Morozov, Y. S. Derbenev, J. Guo, A. Hutton, and Y. Zhang, “Study of Beam Synchronization at JLEIC”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2463-2465.
- W. Barry, J. Byrd, J. Corlett, J. Johnson, G. Lambertson, and J. Fox, “Commissioning of the ALS Transverse Coupled-Bunch Feedback System”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAE13, pp. 2423-2425.
- J. A. Crittenden, M. A. Palmer, and D. L. Rubin, “Wiggler Magnet Design Development for the ILC Damping Rings”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR065, pp. 1969-1971.
- R. Xiang et al., “A Step Closer to the CW High Brilliant Beam with the ELBE SRF-Gun-II”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1456-1458.
- Y. Papaphilippou, L. Farvacque, J. Laskar, and A. Ropert, “Probing the Non-Linear Dynamics of the ESRF Storage Ring with Experimental Frequency Maps”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPG007, pp. 3189-3191.
- L. N. Drosdal et al., “Investigations of SPS Orbit Drifts”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 852-854.
- T. K. Khoe, J. J. Livingood, and W. J. Ramler, “Proposed Midwest Tandem Cyclotron (MTC)”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69A04, pp. XX-XX.
- H.-J. Eckoldt, F. Faubladier, and N. Heidbrook, “Constant-Power Power Supplies for the TESLA Modulators”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP3B08, pp. 2199-2201.
- F. Selph, A. Jackson, and M. S. Zisman, “Injection System Design for the LBL 1-2 GeV Synchrotron Radiation Source”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 446-449.
- D. Pellegrini, M. E. Biagini, and S. Guiducci, “Beam Dynamics Studies for the Injection System of a High Luminosity Flavour Factory”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPME008, pp. 1577-1579.
- O. K. Kester, “High Intensity Issues at FAIR”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper MOI1B01, pp. 11-14.
- P. Craievich et al., “Consolidation and Extension of the High-gradient LINAC RF Technology at PSI”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 937-940.
- G. Horikoshi, T. Kubo, H. Mizuno, K. Satoh, and H. Watanabe, “Vacuum System for the KEK Proton Synchrotron”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1290-1293.
- P.-E. Bernaudin, R. Ferdinand, P. Bosland, Y. Gomez, and G. Olry, “Assembling, Testing and Installing the SPIRAL2 Superconducting Linac”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO001, pp. 3752-3754.
- G. V. Eremeev, A-M. Valente-Feliciano, A. T. Wu, and D. Gu, “Exploring the Effect of AL2O3 ALD Coating on a High Gradient ILC Single-Cell Cavity”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC096, pp. 2441-2443.
- S. L. Hoobler, S. C. Alverson, C. Cyterski, and R. C. Sass, “Upgrades to Control Room Knobs at Slac National Accelerator Laboratory”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 177-179.
- R. K. Buckley et al., “Vertical Test Facility for Superconducting RF Cavities at Daresbury Laboratory”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO008, pp. 365-367.
- J. Plouin et al., “CEA Experience and Effort to Limit Magnetic Flux Trapping in Superconducting Cavities”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB100, pp. 847-851.
- Z. Li et al., “Progress on the Physics Design of the C-ADS Injector Scheme I”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO043, pp. 3863-3865.
- K. S. B. Li et al., “Modelling and Studies for a Wideband Feedback System for Mitigation of Transverse Single Bunch Instabilities”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPME042, pp. 3019-3021.
- A. E. Levichev, Y. D. Chernousov, V. Ivannikov, V. M. Pavlov, and I. V. Shebolaev, “Prototype of Parallel Coupled Accelerating Structure”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP093, pp. 2737-2739.
- M. Cornacchia, S. Di Mitri, G. Penco, and A. Zholents, “Formation of Electron Bunches for Harmonic Cascade X-ray Free Electron Lasers”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THOPA01, pp. 2738-2740.
- Y. T. Ding, P. Emma, and Z. Huang, “Integration of the Optical Replica Ultrashort Electron Bunch Diagnostics with the Current-Enhanced SASE in the LCLS”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMS046, pp. 1293-1295.
- J. M. Weber and M. J. Chin, “ALS FPGA-based Transverse Feedback Electronics”, in Proc. 13th Beam Instrumentation Workshop (BIW'08), Lake Tahoe, CA, USA, May 2008, paper TUPTPF017, pp. 130-132.
- L. J. Kibbe, J. A. Jungerman, and N. F. Peek, “Central Region Studies for Incorporating an Axial Ion Source in the Davis 76 - Inch Cyclotron”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper A-003, pp. XX-XX.
- S. Anderson et al., “First Operation of the Upgraded SLAC A-Line”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP110G, pp. 2468-2470.
- N. Ouchi et al., “Cold Test of 600 MHz Superconducting Cryomodule for High Intensity Proton Linac”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU474, pp. 488-490.
- A. Hofmann, K. Hubner, and B. Zotter, “A Computer Code for the Calculation of Beam Stability in Circular Electron Machines”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3514-3517.
- M. Gross et al., “Laser Pulse Train Management with an Acousto-optic Modulator”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper MOPD61, pp. 189-192.
- J. Halbritter, “Electro- or Chemical- Polishing and UHV Baking of Superconducting rf Nb Cavities and Q(H) Dependencies”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper THPO004, pp. 695-697.
- C. Arcambal et al., “Conditioning of the First Mass Production Power Couplers for the ESS Elliptical Cavities”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 288-292.
- K. Yokoyama et al., “High-Gradient RF Breakdown Studies with Narrow Waveguide”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP028, pp. 879-881.
- O. Mete Apsimon, R. Apsimon, G. Burt, S. Doebert, and G. X. Xia, “S-Band Booster Design and Emittance Preservation for the Awake e-Injector”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 449-451.
- Y. Ogawa, “Commissioning of the KEKB Linac”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper WE2005, pp. 711-718.
- K. M. Baptiste et al., “ALS Top-Off Mode Beam Interlock System”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE4GRC06, pp. 1979-1981.
- Y. Kawashima et al., “Instabilities Related with RF Cavity in the Booster Synchrotron for NSLS-II”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA078, pp. 2669-2671.
- R. A. de Forest, “The Cyclotron and the Computer: A Look at the Present and the Future”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69B01, pp. XX-XX.
- E. Gianfelice-Wendt et al., “SPS Beam Steering for LHC Extraction”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2106-2108.
- K. Zhu et al., “Design and Commissioning of a CW Heavy Ion RFQ Accelerator”, in Proc. 12th Symposium on Accelerator Physics (SAP'14), Lanzhou, China, Aug. 2014, paper THAMH5, pp. 106-109.
- Y. Yamazaki, “J-PARC Status”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO2BCI03, pp. 18-22.
- S. Werin et al., “An Electron Gun Test Stand to Prepare for the MAX IV Project”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPD065, pp. 1551-1553.
- M. A. Kemp, “Solid State Marx Modulators for Emerging Applications”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper WE2A02, pp. 743-747.
Back to search