Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. Simon, C. Benjamin, J. Bradley, and R. Valizadeh, “Impact of ion and neutral angular distribution on thin film deposition in HiPIMS and bipolar HiPIMS”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPB073, unpublished.
[n] K. Nakajima, T. Kageyama, and A. Ogata, “Variation of Longitudinal Beam Position and Profile During Acceleration in Tristan Main Ring”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 570-573.
[n] R. L. Kustom, S. A. Martin, P. F. Meads, G. Wuestefeld, and E. Zaplatin, “The FFAG as an Accelerator for High Intensity Proton Beams”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 574-577.
[n] B. Comiskey et al., “Progress toward dual-pulse operation at the Proton Storage Ring of LANSCE”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 558-562. doi:10.18429/JACoW-NAPAC2025-TUP081
[n] V. V. Oreshonok, V. V. Kolmogorov, and A. N. Karpushov, “Control System for the 1 MW Neutral Beam Injector”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 712-714. doi:10.18429/JACoW-RUPAC2016-THPSC077
[n] S. A. Kheifets and S. A. Heifets, “Radiation of a Charge in a Perfectly Conducting Cylindrical Pipe with a Jump in its Cross Section”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-24, pp. 493-495.
[n] F. Stulle et al., “Beam Loss and Average Beam Current Measurements Using a CWCT”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 882-885. doi:10.18429/JACoW-LINAC2018-THPO086
[n] A. Novokhatski, S. A. Heifets, and D. Teytelman, “High Current Effects in the PEP-II SLAC B-factory”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS077, pp. 4225-4227.
[n] S. Atieh et al., “Welding and Quality Control for the Consolidation of the LHC Superconducting Magnets and Circuits”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2709-2711. doi:10.18429/JACoW-IPAC2014-WEPRI093
[n] R. J. Loewen, A. Menegat, A. E. Vlieks, J. W. Wang, and T. Higo, “SLAC High Gradient Testing of a KEK X-Band Accelerator Structure”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA17, pp. 3420-3422.
[n] S. A. Kahn et al., “Incorporating RF into a Muon Helical Cooling Channel”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE072, pp. 3509-3511.
[n] A. Bulatov, Yu. Evtushenko, V. Kolmogorov, and A. S. Medvedko, “High-voltage Modulator with Small Energy Accumulation in the Output Filter”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP7A02, pp. 2208-2210.
[n] M. Kando et al., “Design of Electron Beam Injection System for Laser Acceleration Experiments at JAERI-Kansai”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA137, pp. 3702-3704.
[n] V. Tioukine, K. Aulenbacher, H. Euteneuer, K.-H. Kaiser, and S. Ratschow, “Spin Manipulation at MAMI - C”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPDO022, pp. 1816-1818.
[n] R. Jones Geneva, “Possible Spin-Offs from LHC Physics Experiments for Beam Instrumentation”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper IT11, pp. XX-XX.
[n] A. Novokhatski, A. V. Aleksandrov, and S. A. Heifets, “Beam Diagnostic by Outside Beam Chamber Fields”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP035, pp. 4024-4026.
[n] M. Yamamoto et al., “High Power Test of MA Cavity for J-PARC RCS”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN063, pp. 1532-1534.
[n] M. Yu et al., “Fabrication and Test of Short Helical Solenoid Model Based on YBCO Tape”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP153, pp. 1118-1120.
[n] J. Seeman et al., “Design for a 1036 Super-B-factory at PEP-II”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT144, pp. 878-880.
[n] I. Miura et al., “A High Energy Version of the RCNP Ring Cyclotron”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper N04, pp. 579-582.
[n] Q. S. Shu et al., “The Effects of Exposing Well Processed RF Surfaces of Superconducting Cavities to Various Media”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89G10, pp. XX-XX.
[n] G. Bassi, J. A. Ellison, and K. A. Heinemann, “A Vlasov-Maxwell Solver to Study Microbunching Instability in the FERMI@ELETTRA First Bunch Compressor System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUOBG04, pp. 971-973.
[n] V. A. Andreev and G. Parisi, “Field Stabilization and End-Cell Tuning in a 4-vane RFQ”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1300-1303.
[n] S. Miura, T. Inagaki, H. Maesaka, H.-S. Lee, H. Matsumoto, and T. Shintake, “Developing S-band Accelerating Structures”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper MOPD51, pp. 153-155.
[n] M. L. Allegrini, D. Benini, D. Bisiach, M. Maggiore, L. Pranovi, and L. de Ruvo, “Beam loss monitors characterization for SPES proton beam line”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4736-4738. doi:10.18429/JACoW-IPAC2023-THPL115
[n] D. Moffat et al., “Superconducting Niobium RF Cavities Designed to Attain High Surface Electric Fields”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89G03, pp. XX-XX.
[n] R. Kato et al., “Far-Infrared Free Electron Laser Based on the L-Band Linac at Osaka University”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D019, pp. 716-718.
[n] Th. Beiser, K. Aulenbacher, M. W. Bruker, and J. Dietrich, “Preliminary Studies of Bem-Induced Fluorescence and Status of the Beam-Current Upgrade of the Electron-Cooler Test-Bench at HIM”, in Proc. COOL'19, Novosibirsk, Russia, Sep. 2019, pp. 83-85. doi:10.18429/JACoW-COOL2019-TUPS04
[n] S. Ganguly, K. T. Pitts, J. D. Crnkovic, and C. C. Polly, “Lost Muon Studies for the Muon g-2 Experiment at Fermilab”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3573-3576. doi:10.18429/JACoW-IPAC2018-THPAK139
[n] H. Zen et al., “Present Status and Upgrade Plan of the UVSOR-II Free Electron Laser”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper WEPC36, pp. 576-579.
[n] R. Denz, K. Dahlerup-Petersen, and K. H. Mess, “Electronic Systems for the Protection of Superconducting Devices in the LHC”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPD010, pp. 2422-2424.
[n] P. Jain, R. Kumar, P. K. Nema, P. Singh, and V. L. SR. sista, “Thermo-structural Analysis of 400 KeV Deuteron RFQ Components”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA093, pp. 235-237.
[n] G. Ramirez et al., “NSLS X-Ray Ring RF System Upgrade”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1419-1421.
[n] F. F. Bertinelli et al., “Design and Fabrication of Superfluid Helium Heat Exchanger Tubes for the LHC Superconducting Magnets”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT010, pp. 1837-1839.
[n] A. V. Zlobin et al., “Modeling the High-Field Section of a Muon Helical Cooling Channel”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB054, pp. 391-393.
[n] F. Hug et al., “Status of the MESA ERL Project”, in Proc. ERL'19, Berlin, Germany, Sep. 2019, pp. 14-17. doi:10.18429/JACoW-ERL2019-MOCOXBS05
[n] Y.-S. Cheng et al., “Virtual Power Supply Control Environment for the TPS Project”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC156, pp. 2349-2351.
[n] A. E. Vlieks, W. R. Fowkes, R. J. Loewen, and S. G. Tantawi, “High Power RF Component Testing for the NLC”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4074, pp. 570-572.
[n] V. Auslender et al., “Status of the Industrial RF-accelerators in BINP”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THC3H101, pp. 622-624.
[n] P. Lebrun, J. Cary, S. Veitzer, P. Spentzouris, and P. Stoltz, “Accurate Simulation of the Electron Cloud in the Fermilab Main Injector with VORPAL”, in Proc. ECLOUD'10, Ithaca, NY, USA, Oct. 2010, paper MOD03, pp. 152-161.
[n] D. E. Rees et al., “The RF System Design for the Spallation Neutron Source”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH099, pp. 1002-1004.
[n] S. Matsumoto et al., “High Power Testing Results of the X-Band Mixed-Mode RF Windows for Linear Colliders”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THA02, pp. 736-738.
[n] Ph. Gayet, “UNICOS a Framework to Build Industry like Control Systems: Principles & Methodology”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper I3_002.
[n] A. H. Shapiro, R. C. Gentzlinger, J. E. Ledford, M. A. Madrid, D. I. Montoya, and T. Tajima, “A New Temperature and X-Ray Mapping System for 700-MHz 5-Cell Superconducting Cavities”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH144, pp. 1116-1118.
[n] Y. R. Pan et al., “Post-mortem Analysis at TLS”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC157, pp. 2352-2354.
[n] V. P. Derenchuk and A. S. Belov, “A Multi-Milliampere Polarized and Unpolarized Negative Ion Source for IUCF”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH008, pp. 2093-2095.
[n] N. Vinokurov et al., “Commissioning of Novosibirsk Multi-pass Energy Recovery Linac”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper THCAU01, pp. 507-510.
[n] J. Seeman et al., “Achieving a Luminosity of 1034/cm2/s in the PEP-II B-factory”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS045, pp. 643-645.
[n] T. Saeki et al., “R&D for the Post-EP Processes of Superconducting RF Cavity”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO085, pp. 824-828.
[n] C. W. Roberson, “The Racetrack Induction Accelerator”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3433-3436.
[n] S. Veitzer, K. Sonnad, P. Lebrun, and P. Stoltz, “Modeling Electron Cloud Buildup and Microwave Diagnostics using VORPAL”, in Proc. ECLOUD'10, Ithaca, NY, USA, Oct. 2010, paper MOD04, pp. 162-166.
For LaTeX
Use Complete Form
For BibTeX
References
- S. Simon, C. Benjamin, J. Bradley, and R. Valizadeh, “Impact of ion and neutral angular distribution on thin film deposition in HiPIMS and bipolar HiPIMS”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPB073, unpublished.
- K. Nakajima, T. Kageyama, and A. Ogata, “Variation of Longitudinal Beam Position and Profile During Acceleration in Tristan Main Ring”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 570-573.
- R. L. Kustom, S. A. Martin, P. F. Meads, G. Wuestefeld, and E. Zaplatin, “The FFAG as an Accelerator for High Intensity Proton Beams”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 574-577.
- B. Comiskey et al., “Progress toward dual-pulse operation at the Proton Storage Ring of LANSCE”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 558-562.
- V. V. Oreshonok, V. V. Kolmogorov, and A. N. Karpushov, “Control System for the 1 MW Neutral Beam Injector”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 712-714.
- S. A. Kheifets and S. A. Heifets, “Radiation of a Charge in a Perfectly Conducting Cylindrical Pipe with a Jump in its Cross Section”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH3-24, pp. 493-495.
- F. Stulle et al., “Beam Loss and Average Beam Current Measurements Using a CWCT”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 882-885.
- A. Novokhatski, S. A. Heifets, and D. Teytelman, “High Current Effects in the PEP-II SLAC B-factory”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS077, pp. 4225-4227.
- S. Atieh et al., “Welding and Quality Control for the Consolidation of the LHC Superconducting Magnets and Circuits”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2709-2711.
- R. J. Loewen, A. Menegat, A. E. Vlieks, J. W. Wang, and T. Higo, “SLAC High Gradient Testing of a KEK X-Band Accelerator Structure”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA17, pp. 3420-3422.
- S. A. Kahn et al., “Incorporating RF into a Muon Helical Cooling Channel”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE072, pp. 3509-3511.
- A. Bulatov, Yu. Evtushenko, V. Kolmogorov, and A. S. Medvedko, “High-voltage Modulator with Small Energy Accumulation in the Output Filter”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP7A02, pp. 2208-2210.
- M. Kando et al., “Design of Electron Beam Injection System for Laser Acceleration Experiments at JAERI-Kansai”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA137, pp. 3702-3704.
- V. Tioukine, K. Aulenbacher, H. Euteneuer, K.-H. Kaiser, and S. Ratschow, “Spin Manipulation at MAMI - C”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPDO022, pp. 1816-1818.
- R. Jones Geneva, “Possible Spin-Offs from LHC Physics Experiments for Beam Instrumentation”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper IT11, pp. XX-XX.
- A. Novokhatski, A. V. Aleksandrov, and S. A. Heifets, “Beam Diagnostic by Outside Beam Chamber Fields”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP035, pp. 4024-4026.
- M. Yamamoto et al., “High Power Test of MA Cavity for J-PARC RCS”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAN063, pp. 1532-1534.
- M. Yu et al., “Fabrication and Test of Short Helical Solenoid Model Based on YBCO Tape”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP153, pp. 1118-1120.
- J. Seeman et al., “Design for a 1036 Super-B-factory at PEP-II”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT144, pp. 878-880.
- I. Miura et al., “A High Energy Version of the RCNP Ring Cyclotron”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper N04, pp. 579-582.
- Q. S. Shu et al., “The Effects of Exposing Well Processed RF Surfaces of Superconducting Cavities to Various Media”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89G10, pp. XX-XX.
- G. Bassi, J. A. Ellison, and K. A. Heinemann, “A Vlasov-Maxwell Solver to Study Microbunching Instability in the FERMI@ELETTRA First Bunch Compressor System”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUOBG04, pp. 971-973.
- V. A. Andreev and G. Parisi, “Field Stabilization and End-Cell Tuning in a 4-vane RFQ”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1300-1303.
- S. Miura, T. Inagaki, H. Maesaka, H.-S. Lee, H. Matsumoto, and T. Shintake, “Developing S-band Accelerating Structures”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper MOPD51, pp. 153-155.
- M. L. Allegrini, D. Benini, D. Bisiach, M. Maggiore, L. Pranovi, and L. de Ruvo, “Beam loss monitors characterization for SPES proton beam line”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL115, pp. 4736-4738.
- D. Moffat et al., “Superconducting Niobium RF Cavities Designed to Attain High Surface Electric Fields”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89G03, pp. XX-XX.
- R. Kato et al., “Far-Infrared Free Electron Laser Based on the L-Band Linac at Osaka University”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 6D019, pp. 716-718.
- Th. Beiser, K. Aulenbacher, M. W. Bruker, and J. Dietrich, “Preliminary Studies of Bem-Induced Fluorescence and Status of the Beam-Current Upgrade of the Electron-Cooler Test-Bench at HIM”, in Proc. 12th Workshop on Beam Cooling and Related Topics (COOL'19), Novosibirsk, Russia, Sep. 2019, pp. 83-85.
- S. Ganguly, K. T. Pitts, J. D. Crnkovic, and C. C. Polly, “Lost Muon Studies for the Muon g-2 Experiment at Fermilab”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3573-3576.
- H. Zen et al., “Present Status and Upgrade Plan of the UVSOR-II Free Electron Laser”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper WEPC36, pp. 576-579.
- R. Denz, K. Dahlerup-Petersen, and K. H. Mess, “Electronic Systems for the Protection of Superconducting Devices in the LHC”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPD010, pp. 2422-2424.
- P. Jain, R. Kumar, P. K. Nema, P. Singh, and V. L. SR. sista, “Thermo-structural Analysis of 400 KeV Deuteron RFQ Components”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper TUPMA093, pp. 235-237.
- G. Ramirez et al., “NSLS X-Ray Ring RF System Upgrade”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1419-1421.
- F. F. Bertinelli et al., “Design and Fabrication of Superfluid Helium Heat Exchanger Tubes for the LHC Superconducting Magnets”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT010, pp. 1837-1839.
- A. V. Zlobin et al., “Modeling the High-Field Section of a Muon Helical Cooling Channel”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB054, pp. 391-393.
- F. Hug et al., “Status of the MESA ERL Project”, in Proc. 63rd Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'19), Berlin, Germany, Sep. 2019, pp. 14-17.
- Y.-S. Cheng et al., “Virtual Power Supply Control Environment for the TPS Project”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC156, pp. 2349-2351.
- A. E. Vlieks, W. R. Fowkes, R. J. Loewen, and S. G. Tantawi, “High Power RF Component Testing for the NLC”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4074, pp. 570-572.
- V. Auslender et al., “Status of the Industrial RF-accelerators in BINP”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THC3H101, pp. 622-624.
- P. Lebrun, J. Cary, S. Veitzer, P. Spentzouris, and P. Stoltz, “Accurate Simulation of the Electron Cloud in the Fermilab Main Injector with VORPAL”, in Proc. 49th ICFA Advanced Beam Dynamics Workshop on Electron Cloud Physics (ECLOUD'10), Ithaca, NY, USA, Oct. 2010, paper MOD03, pp. 152-161.
- D. E. Rees et al., “The RF System Design for the Spallation Neutron Source”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH099, pp. 1002-1004.
- S. Matsumoto et al., “High Power Testing Results of the X-Band Mixed-Mode RF Windows for Linear Colliders”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THA02, pp. 736-738.
- Ph. Gayet, “UNICOS a Framework to Build Industry like Control Systems: Principles & Methodology”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper I3_002.
- A. H. Shapiro, R. C. Gentzlinger, J. E. Ledford, M. A. Madrid, D. I. Montoya, and T. Tajima, “A New Temperature and X-Ray Mapping System for 700-MHz 5-Cell Superconducting Cavities”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH144, pp. 1116-1118.
- Y. R. Pan et al., “Post-mortem Analysis at TLS”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC157, pp. 2352-2354.
- V. P. Derenchuk and A. S. Belov, “A Multi-Milliampere Polarized and Unpolarized Negative Ion Source for IUCF”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH008, pp. 2093-2095.
- N. Vinokurov et al., “Commissioning of Novosibirsk Multi-pass Energy Recovery Linac”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper THCAU01, pp. 507-510.
- J. Seeman et al., “Achieving a Luminosity of 1034/cm2/s in the PEP-II B-factory”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS045, pp. 643-645.
- T. Saeki et al., “R&D for the Post-EP Processes of Superconducting RF Cavity”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO085, pp. 824-828.
- C. W. Roberson, “The Racetrack Induction Accelerator”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3433-3436.
- S. Veitzer, K. Sonnad, P. Lebrun, and P. Stoltz, “Modeling Electron Cloud Buildup and Microwave Diagnostics using VORPAL”, in Proc. 49th ICFA Advanced Beam Dynamics Workshop on Electron Cloud Physics (ECLOUD'10), Ithaca, NY, USA, Oct. 2010, paper MOD04, pp. 162-166.
Back to search