JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	M. G. Mazarakis et al., “Experimental Investigation of Certain Beam Transport Issues in a Pulsed Transmission Line Linear Accelerator”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper FRQ0004, pp. 466-468. 
[n]	R. Pardo and G. P. Zinkann, “Long-Term Operating Experience for the ATLAS Superconducting Resonators”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper MOA003, pp. 10-14. 
[n]	S. M. Oprondek et al., “Next Generation X-ray Beam Position Monitor System for the Advanced Photon Source MBA Upgrade”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 99-101. doi:10.18429/JACoW-MEDSI2018-TUPH29
[n]	E. Huttel, I. A. Abid, and S. Kh. Jafar, “The Pulsed Power Supplies of the SESAME Booster and Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3415-3417. doi:10.18429/JACoW-IPAC2017-WEPVA064
[n]	G. Vecchio et al., “A New Flexible and Interactive Control System for the INFN-LNS Accelerators and Beamlines”, presented at the IBIC'20, Santos, Brazil, Sep. 2020, paper TUPP13, unpublished. 
[n]	G. Gaitan et al., “Development of a System for Coating SRF Cavities Using Remote Plasma CVD”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 129. doi:10.18429/JACoW-SRF2021-SUPTEV007
[n]	K. Saito et al., “Superiority of Electropolishing over Chemical Polishing on High Gradients”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97D02, pp. 795-813. 
[n]	A. V. Zlobin et al., “TEST RESULTS OF A NB3SN QUADRUPOLE COIL IMPREGNATED WITH RADIATION-RESISTANT MATRIMID 5292”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPME045, pp. 3612-3614. 
[n]	C. E. Adolphsen, P. J. Emma, T. H. Fieguth, and W. L. Spence, “Chromatic Correction in the SLC Bunch Length Compressors”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 503-506. 
[n]	L. Garabito Ruiz, N. Evans, A. Hoover, and S. Lund, “Simulation of improved injection kicker waveforms in the SNS accumulator ring”, presented at the HIAT'25, East Lansing, MI, USA, Jun. 2025, paper MOP02, unpublished. 
[n]	Y. A. Svistunov, A. P. Durkin, and A. D. Ovsyannikov, “Beam Dynamics Investigations for 433 MHz RFQ Accelerator”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper TUCCH02, pp. 82-84. 
[n]	U. Becker, “CST's Commercial Beam-Physics Codes”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper THM2IS03, pp. 308-308. 
[n]	J. T. Seeman and J. C. Sheppard, “Special SLC Linac Developments”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE1-2, pp. 214-219. 
[n]	H. Smith, T. Constant, K. Crook, J. Fitch, and T. Taylor, “Radiation and Electrical Safety Systems for PEP”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2800-2803. 
[n]	M. G. Mazarakis et al., “'Smile'' a New Version for the RADLAC II Linear Accelerator”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU448, pp. 438-440. 
[n]	T. E. Plawski, R. Bachimanchi, C. Hovater, D. J. Seidman, and M. J. Wissmann, “LLRF System for the CEBAF Separator Upgrade”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP133, pp. 1171-1173. 
[n]	J. Ferm?®, F. Ripouteau, J. L. Belmont, G. Laborie, and G. Goin, “Grenoble Cycloton Progress Report”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69A18, pp. XX-XX. 
[n]	A. V. Bondarenko, Y. H. Han, Y. U. Jeong, B. C. Lee, S. V. Miginsky, and S. H. Park, “The Design of a 1.8 keV Compton X-ray Generator for a SC RF Linac at KAERI”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH057, pp. 169-171. 
[n]	J. Plouin, J.-P. Charrier, C. Magne, J. Novo, and L. Maurice, “Experimental Investigations of the Quench Phenomena for the Quench Localization by the Second Sound Wave Method”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP111, pp. 739-742. 
[n]	M. G. Mazarakis, G. H. Berry, and E. P. Colton, “XeN - XeN Charge Exchange Experiment Using a Split-Beam and Beam Intersection Technique”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3184-3187. 
[n]	N. G. Wilson and D. Precechtel, “Mechanical Design and Fabrication of a 425-MHz H-Buncher”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1851-1854. 
[n]	K. Nam and J. Choi, “A Study of a TBA Lattice for the Pohang Light Source”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1399-1402. 
[n]	S. Zaremba et al., “Beam Dynamics in Newly Designed Cyclotrons at Ion Beam Applications”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1774-1777. 
[n]	G. J. Caporaso et al., “Beam-Target Interaction Experiments For Bremsstrahlung Converters Applications”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUB13, pp. 464-466. 
[n]	V. E. Scarpine et al., “First Beam Measurements of the FNAL HINS RFQ”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM076, pp. 359-363. 
[n]	Y. Jaski, “Closing Remarks”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, paper THCL01, pp. XX-XX. 
[n]	I. V. Rybakov and I. I. Isaev, “Estimation of Multipacting in CDS Structure”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 288-290. doi:10.18429/JACoW-RUPAC2016-TUPSA035
[n]	Z. A. Conway, R. L. Fischer, M. P. Kelly, A. Kolomiets, B. Mustapha, and P. N. Ostroumov, “A Comparison of Superconducting RF Structures Optimized for  = 0.285”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP044, pp. 889-891. 
[n]	R. Pardo, Y. Kawarasaki, and K. Wasniewski, “A CAMAC-Based Intelligent Subsystem for ATLAS, Example Application: Cryogenic Monitoring and Control”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2017-2020. 
[n]	S. Sampayan, G. Caporaso, D. Trimble, and G. Westenskow, “Emission, Plasma Formation, and Brightness of a PZT Ferroelectric Cathode”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPE14, pp. 899-901. 
[n]	Y. J. Yuan, Y. N. Rao, B. W. Wei, and J. W. Xia, “Simulation of RF Stacking and Multiple Single-Turn Injection and Multiturn Injection”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper H-11, pp. 479-482. 
[n]	M. Mizumoto et al., “A High Intensity Proton Linac Development for the JAERI Neutron Science Project”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU1004, pp. 349-356. 
[n]	R. Stassen, B. Breitkreutz, T. Katayama, N. Shurkhno, H. Stockhorst, and L. Thorndahl, “First Experiences with HESR Stochastic Cooling System”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2278-2280. doi:10.18429/JACoW-IPAC2017-TUPVA085
[n]	J. M. Nixon and L. M. Bollinger, “The Liqud Helium System of  ATLAS”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 571-574. 
[n]	J. P. Woodruff, D. D. Casavant, B. D. Cline, and M. R. Gorvad, “Quality Control, Testing and Deployment Results in NIF ICCS”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUDT001, pp. XX-XX. 
[n]	Z. A. Conway et al., “First Experimental Results for the Superconducting Half-Wave Resonators for PXIE”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP001, pp. 46-48. 
[n]	D. Sanders, S. Sampayan, R. Neurath, and M. Krogh, “Evaluation of Target Options for Advanced Radiography Facilities”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP161, pp. 2611-2613. 
[n]	A. W. Molvik, W. R. Meier, A. Faltens, L. Reginato, and C. Smith, “Induction Core Performance”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4106, pp. 320-322. 
[n]	G. Eremeev and H. Padamsee, “Change in High Field Q-slope by Baking and Anodizing”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP03, pp. 236-239. 
[n]	A. Balabaev et al., “Laser Source of Highly-Charged Ions for ITEP TeraWatt Accumulator Facility”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP3A01, pp. 551-553. 
[n]	S. Kondrashev and B. Sharkov, “Matching of the Intensive Laser Ion Source to the RFQ Accelerators”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP050L, pp. 1550-1552. 
[n]	M. Fedorov et al., “In the Midst of Fusion Ignition: A Look at the State of the National Ignition Facility Control and Information Systems”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 973-978. doi:10.18429/JACoW-ICALEPCS2023-WE2BCO02
[n]	J. Alessi, E. Beebe, A. Kponou, A. I. Pikin, and K. Prelec, “Heavy Ion Extraction from the BNL High Current EBIS Teststand”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2B06, pp. 1589-1591. 
[n]	P. Khare, P. K. Kush, and M. G. Karmarkar, “Approach Towards Establishing Cryogenic Test Facility for SCRF Cavities of 10 MeV Proton LINAC”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP17, pp. 320-321. 
[n]	M. W. McGee and J. T. Volk, “Vibrational Stability of SRF Accelerator Test Facility at Fermilab”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP059, pp. 960-962. 
[n]	K. Hasegawa, Y. Honda, H. Ino, M. Mizumoto, and N. Ouchi, “Beam Dynamics Design of a Proton Linac for the Neutron Science Project at JAERI”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP05G, pp. 719-721. 
[n]	J. Willard, T. Wilson, and W. A. Wurtz, “Compensation Controls for an Elliptically Polarising Undulator”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1658-1662. doi:10.18429/JACoW-ICALEPCS2017-THPHA120

For LaTeX

Use Complete Form

For BibTeX

References

Back to search