Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] H. J. Kim et al., “Commissioning status of the RAON superconducting accelerator”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2192-2194. doi:10.18429/JACoW-IPAC2023-TUPM002
[n] Y. Nakazawa et al., “Development of an APF IH-DTL in the J-PARC Muon g-2/EDM Experiment”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2544-2547. doi:10.18429/JACoW-IPAC2021-WEXB06
[n] J. F. Power, S. S. Kurennoy, J. F. O'Hara, M. A. Plum, and M. Stettler, “Beam Position Monitors for the SNS Linac”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH070, pp. 1375-1377.
[n] M. Syha, U. Ratzinger, and M. Schuett, “Beam Dynamics for the FAIR p-Linac Ladder RFQ”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 522-524. doi:10.18429/JACoW-LINAC2018-TUPO083
[n] T. Tolba, E. Baussan, A. Bignami, N. Gazis, F. Sordo Balbin, and E. Trachanas, “ESSnuSB target test facility”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPB033, unpublished.
[n] D. Bruhwiler, J. R. Cary, R. E. Giacone, P. Mardahl, and J. Verboncoeur, “Simulations of Plasma Wakefield Acceleration with XOOPIC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2B04, pp. 877-879.
[n] K. Egawa and M. Masuzawa, “Magnet Field Measurement for KEK B-factory”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP16G, pp. 1948-1950.
[n] G. B. Bowden et al., “Microwave Cold-Testing Techniques for the NLC”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP085L, pp. 2056-2058.
[n] I. V. Agapov, H. Ehrlichmann, J. Keil, G. K. Sahoo, R. Wanzenberg, and Y.-C. Chae, “Automatic Tuning of PETRA, its Injector Complex, and Prospects of Autonomous Operation of PETRA IV”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1912-1915. doi:10.18429/JACoW-IPAC2018-WEPAF044
[n] M. Champion et al., “Progress towards the completion of the proton power upgrade project”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1691-1694. doi:10.18429/JACoW-IPAC2024-TUPS27
[n] D. T. Tran, “Focusing of an Alvarez Linac by Use of Magnetic Quadrupoles Oriented at 45o (Presented by M.G. Gilbaud)”, in Proc. LINAC'64, Madison, WI, USA, Jul. 1964, paper PART3-6, pp. 309-327.
[n] N. Chaisueb and S. Rimjaem, “Study on Undulator Radiation from Femtosecond Electron Bunches”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 702-706. doi:10.18429/JACoW-FEL2015-WEP062
[n] W. Habiger, R. Clifford, F. McCullough, and R. Bruce Miller, “EXDEP/CTX-An Explosive Detection System for Screening Luggage with High Energy X-Rays”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2622-2625.
[n] S. Cao, L. Lai, J. Chen, and Y. Leng, “BAM system and machine stability at SXFEL”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4866-4868. doi:10.18429/JACoW-IPAC2023-THPL177
[n] K. Eppley et al., “Operation of a 1.3 GHz, 10 MW Multiple Beam Klystron”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP39, pp. 693-693.
[n] M. G. Abbott et al., “Implementation, Commissioning and Current Status of the Diamond Light Source Control System”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TOAA05, pp. 56-58.
[n] E. D. van Garderen, G. LeBlanc, A. C. Starritt, K. Zingre, and M. L. M. ten Have, “Upgrade of the Timing System at the Australian Synchrotron”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPD27, pp. 357-359.
[n] A. Toral Diez, S. L. Birch, M. Mansouri, A. Nordt, D. Paulic, and Y. K. Sin, “ESS Accelarator Oxygen Depletion Hazard Detection System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 666-669. doi:10.18429/JACoW-ICALEPCS2017-TUPHA106
[n] A. S. Tsyganov et al., “Stand for Precision Measurements of Magnetic Lenses Field Quality”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPC022, pp. 495-497.
[n] M. Dehn, K. Aulenbacher, and P. Plattner, “Unconventional high-voltage insulator in DC photoemission sources”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2083-2085. doi:10.18429/JACoW-IPAC2024-WEPC53
[n] D. K. Kalantaryan, G. A. Amatuni, P. Beaud, G. Ingold, A. Streun, and V. M. Tsakanov, “Laser -- Beam Interaction and Calculation of the Sliced Bunch Radiation Spectra for the SLS FEMTO Beam Line”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC026, pp. 2040-2042.
[n] A. Gonz?ílez Romero, J. J. Casas, C. Colldelram, and M. Quispe, “CFD Predictions of Water Flow Through Impellers of the ALBA Centrifugal Pumps and Their Aspiration Zone. An Investigation of Fluid Dynamics Effects on Cavitation Problems”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 299. doi:10.18429/JACoW-MEDSI2020-WEPB16
[n] Y. Petenev et al., “Precise Measurement of Small Currents at the MLS”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 118-121. doi:10.18429/JACoW-IBIC2018-MOPC03
[n] H. Zyngier, “Low Emittance Photon Beam for a Synchrotron Radiation Source”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 484-486.
[n] J. P. Blewett, “Linacs of the Future”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper I-01, pp. 1-3.
[n] R. Bailey, G. Geschonke, E. Keil, M. Lamont, and G. von Holtey, “Studies of Bunch Trains in LEP”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 445-448.
[n] J. K. Boyd, G. J. Caporaso, A. G. Cole, and J. T. Weir, “Beam Quality of the ATA Injector”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 925-928.
[n] M. Baschke, H. Podlech, and A. Schempp, “A Two-Stage Splitring-RFQ for High Current Ion Beams at Low Frequencies”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 941-942. doi:10.18429/JACoW-IPAC2018-TUPAF087
[n] J. E. Spencer, “Accelerator Diagnosis and Control by Neural Net”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1642-1645.
[n] G. von Holtey, W. Niessen, and P. Roudeau, “Synchrotron Radiation Masks for LEP2”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 454-457.
[n] J. H. Han et al., “Conditioning and High Power Test of the RF Guns at PITZ”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF026, pp. 357-359.
[n] E. Hartwig, “The AEG Compact Cyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69F04, pp. XX-XX.
[n] R. J. Briggs et al., “Beam Dynamics in the ETA and ATA 10 kA Linear Induction Accelerators-Observations and Issues”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3360-3365.
[n] S. Feher et al., “Quench Protection of SC Quadrupole Magnets”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6P001, pp. 3389-3391.
[n] M. Bickley and K. White, “The Integration of Two Control Systems”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPA12, pp. 2220-2222.
[n] R. L. Parise et al., “Development of Diffusion Bonded Joints of AA6061 Aluminum Alloy to AISI 316LN Stainless Steel for Sirius Planar Undulators”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3459-3462. doi:10.18429/JACoW-IPAC2021-WEPAB334
[n] C. D. Moore, R. Coleman, G. Goderre, and M. J. Yang, “Tevatron Extraction Modelling”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1498-1501.
[n] A. V. Aleksandrov et al., “High-Dynamic-Range Current Measurements in the Medium-Energy Beta Transport Line at the Spallation Neutron Source”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TUP002, pp. 244-246.
[n] R. Legg, B. Dunham, S. Higgins, R. Kazimi, D. Kehne, and T. Oren, “Interactive Troubleshooting Guide for Accelerators”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P063, pp. 3755-3757.
[n] E. A. Hughes, T. Ring, and B. Taylor, “A Single Bunch Systrem for the Daresbury SRS”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2633-2636.
[n] F.-J. Decker, J. T. Seeman, and R. Brown, “Beam Size Measurements with Noninterceptive Off-Axis Screens”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2507-2510.
[n] R. N. Litunovsky and V. Nikolaev, “Central Region of 240 - cm Variable Energy Cyclotron”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper A-004, pp. XX-XX.
[n] S. Sierra et al., “LCLSII Fundamental Power Coupler Manufacturing Status and Lesson Learned”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 893-894. doi:10.18429/JACoW-LINAC2018-THPO092
[n] F. Varela et al., “TIP: An Umbrella Application for all SCADA-Based Applications for the CERN Technical Infrastructure”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 184-187. doi:10.18429/JACoW-ICALEPCS2015-MOPGF039
[n] C. Sibley, “Machine Protection Strategies for High Power Accelerators”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROPB001, pp. 607-611.
[n] J. Lee et al., “Emittance Measurements at the PAL-XFEL Injector Test Facility”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 690-693. doi:10.18429/JACoW-FEL2015-WEP058
[n] J. Preble et al., “SNS Cryomodule Performance”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAA001, pp. 457-461.
[n] P. Alvarez, J. C. Bau, S. Deghaye, I. Kozsar, J. Serrano, and J. H. Lewis, “The CERN LHC Central Timing, a Vertical Slice”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper FOAA03, pp. 711-713.
[n] N. M. Cook et al., “Modeling of Capillary Discharge Plasmas for Wakefield Accelerators and Beam Transport”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1740-1743. doi:10.18429/JACoW-IPAC2021-TUPAB153
[n] F. S. Reinath, R. M. Richter, J. T. Tanabe, and E. Zajec, “A Cryogenic Pumping System Proposed for the Bevatron”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 690-694.
[n] A. Butterworth, L. Arnaudon, G. Beetham, E. Ciapala, J.-C. Juillard, and R. Olsen, “The LEP RF Trip and Beam Loss Diagnostics System”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPDO027, pp. 2004-2006.
[n] J. Choi et al., “Design of the PAL Test FEL Machine”, in Proc. FEL'07, Novosibirsk, Russia, Aug. 2007, paper MOPPH061, pp. 149-151.
[n] G. Rehm, M. G. Abbott, C. Bloomer, and I. Uzun, “Synchronous Measurement of Stability of Electron Beam, X-ray Beam, Ground and Cavity Voltage”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD78, pp. 227-229.
[n] C. W. Potts and F. R. Brumwell, “The Zero Gradient Synchrotron Closed Orbit Position Monitoring System”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 918-920.
[n] T. B. Bolshakov, A. D. Petrov, and S. L. Lackey, “Synoptic Display - A Client-Server System for Graphical Data Representation”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP505, pp. XX-XX.
[n] S. G. Arutunian, N. M. Dobrovolski, M. R. Mailian, I. G. Sinenko, and I. E. Vasiniuk, “Vibrating Wire Scanner for Beam Profile Monitoring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA97, pp. 2105-2107.
[n] S. A. Kheifets and S. A. Heifets, “Radiation of a Charge in a Perfectly Conducting Cylindrical Pipe with a Jump in its Cross Section”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-24, pp. 493-495.
[n] D. E. Nagle, “The LASL Meson Factory”, in Proc. LINAC'64, Madison, WI, USA, Jul. 1964, paper PART1-7, pp. 94-107.
[n] W. Barletta, S. Chattopadhyay, A. A. Zholents, and M. Zolotorev, “Halo Particle Confinement in the VLHC using Optical Stochastic Cooling”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUOAF102, pp. 262-264.
[n] M. K. Sullivan, K. J. Bertsche, S. Bettoni, E. Paoloni, P. Raimondi, and P. Vobly, “A New Interaction Region Design for the Super-B Factory”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB027, pp. 1581-1583.
[n] J. D. Jarvis et al., “Transverse Emittance of Diamond Field-Emitter Arrays”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH014, pp. 262-264.
[n] M. Kreider et al., “`WhiteRabbit' - A novel, high precision timing system”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper FRCOMA01, pp. 192-194.
[n] C. Dickey et al., “EPICS at Duke University”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPA11, pp. 2217-2219.
[n] A. D. Shabalina, “Niobium Chronicles: Surface Quality Investigation and Recovery During Material Procurement for the PIP-II High Beta 650 MHz Cavities”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 880-883. doi:10.18429/JACoW-SRF2023-WEPWB121
[n] R. H. Miller, “Measurements of the SLAC Injector Emittance”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper II-05, pp. 65-71.
[n] K. Jacobs, S. Bradley, A. Carter, B. McAllister, C. Sibley, and F. Wang, “Real Time Dispersion Measurements at the MIT-Bates Linac”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P079, pp. 2099-2101.
[n] S.-Y. Teng, S.-H. Chen, W.-Y. Chiang, S.-W. Chou, and W. Lau, “Calculation for a compact laser plasma undulator beamline based on the experimental beam parameters at NCU”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1870-1873. doi:10.18429/JACoW-IPAC2023-TUPL052
[n] K. Batchelor, R. Chasman, and T. Werntz, “Measurements and Calculations on the 50-MeV Brookhaven Linac”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper II-01, pp. 28-33.
[n] H. Hotchi, S. Machida, and F. Noda, “Effects of Magnetic Field Tracking Errors on Beam Dynamics at J-PARC RCS”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN046, pp. 4078-4080.
[n] S. Myers, R. Olsen, and I. Wilson, “Hardware for the LEP Transverse Feedback System”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 751-754.
[n] H. N. Nakayama, T. Koga, K. Kojima, A. Natochii, and S. Vahsen, “Beam Background Measurements at SuperKEKB/Belle-II in 2020”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2532-2535. doi:10.18429/JACoW-IPAC2021-WEXA07
[n] A. J. Jason, B. Blind, P. J. Channell, and T.-S. F. Wang, “Minimization of First-Turn Losses by Excited Neutrals in Charge-Changing Injection of Accumulator Rings”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1219-1222.
[n] C. Dickey, G. V. Karpov, J. Madey, A. S. Medvedko, E. I. Shubin, and N. I. Zinevich, “NMR System for Magnetic Field Measurements at the MARK-3 Free Electron Laser”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP009G, pp. 2541-2542.
For LaTeX
Use Complete Form
For BibTeX
References
- H. J. Kim et al., “Commissioning status of the RAON superconducting accelerator”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM002, pp. 2192-2194.
- Y. Nakazawa et al., “Development of an APF IH-DTL in the J-PARC Muon g-2/EDM Experiment”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2544-2547.
- J. F. Power, S. S. Kurennoy, J. F. O'Hara, M. A. Plum, and M. Stettler, “Beam Position Monitors for the SNS Linac”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH070, pp. 1375-1377.
- M. Syha, U. Ratzinger, and M. Schuett, “Beam Dynamics for the FAIR p-Linac Ladder RFQ”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 522-524.
- T. Tolba, E. Baussan, A. Bignami, N. Gazis, F. Sordo Balbin, and E. Trachanas, “ESSnuSB target test facility”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPB033, this conference.
- D. Bruhwiler, J. R. Cary, R. E. Giacone, P. Mardahl, and J. Verboncoeur, “Simulations of Plasma Wakefield Acceleration with XOOPIC”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP2B04, pp. 877-879.
- K. Egawa and M. Masuzawa, “Magnet Field Measurement for KEK B-factory”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP16G, pp. 1948-1950.
- G. B. Bowden et al., “Microwave Cold-Testing Techniques for the NLC”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP085L, pp. 2056-2058.
- I. V. Agapov, H. Ehrlichmann, J. Keil, G. K. Sahoo, R. Wanzenberg, and Y.-C. Chae, “Automatic Tuning of PETRA, its Injector Complex, and Prospects of Autonomous Operation of PETRA IV”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1912-1915.
- M. Champion et al., “Progress towards the completion of the proton power upgrade project”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS27, pp. 1691-1694.
- D. T. Tran, “Focusing of an Alvarez Linac by Use of Magnetic Quadrupoles Oriented at 45o (Presented by M.G. Gilbaud)”, in Proc. 1964 Linear Accelerator Conf. (LINAC'64), Madison, WI, USA, Jul. 1964, paper PART3-6, pp. 309-327.
- N. Chaisueb and S. Rimjaem, “Study on Undulator Radiation from Femtosecond Electron Bunches”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 702-706.
- W. Habiger, R. Clifford, F. McCullough, and R. Bruce Miller, “EXDEP/CTX-An Explosive Detection System for Screening Luggage with High Energy X-Rays”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2622-2625.
- S. Cao, L. Lai, J. Chen, and Y. Leng, “BAM system and machine stability at SXFEL”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL177, pp. 4866-4868.
- K. Eppley et al., “Operation of a 1.3 GHz, 10 MW Multiple Beam Klystron”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper THP39, pp. 693-693.
- M. G. Abbott et al., “Implementation, Commissioning and Current Status of the Diamond Light Source Control System”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TOAA05, pp. 56-58.
- E. D. van Garderen, G. LeBlanc, A. C. Starritt, K. Zingre, and M. L. M. ten Have, “Upgrade of the Timing System at the Australian Synchrotron”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPD27, pp. 357-359.
- A. Toral Diez, S. L. Birch, M. Mansouri, A. Nordt, D. Paulic, and Y. K. Sin, “ESS Accelarator Oxygen Depletion Hazard Detection System”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 666-669.
- A. S. Tsyganov et al., “Stand for Precision Measurements of Magnetic Lenses Field Quality”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper WEPPC022, pp. 495-497.
- M. Dehn, K. Aulenbacher, and P. Plattner, “Unconventional high-voltage insulator in DC photoemission sources”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC53, pp. 2083-2085.
- D. K. Kalantaryan, G. A. Amatuni, P. Beaud, G. Ingold, A. Streun, and V. M. Tsakanov, “Laser -- Beam Interaction and Calculation of the Sliced Bunch Radiation Spectra for the SLS FEMTO Beam Line”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC026, pp. 2040-2042.
- A. Gonz?ílez Romero, J. J. Casas, C. Colldelram, and M. Quispe, “CFD Predictions of Water Flow Through Impellers of the ALBA Centrifugal Pumps and Their Aspiration Zone. An Investigation of Fluid Dynamics Effects on Cavitation Problems”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 299.
- Y. Petenev et al., “Precise Measurement of Small Currents at the MLS”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 118-121.
- H. Zyngier, “Low Emittance Photon Beam for a Synchrotron Radiation Source”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 484-486.
- J. P. Blewett, “Linacs of the Future”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper I-01, pp. 1-3.
- R. Bailey, G. Geschonke, E. Keil, M. Lamont, and G. von Holtey, “Studies of Bunch Trains in LEP”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 445-448.
- J. K. Boyd, G. J. Caporaso, A. G. Cole, and J. T. Weir, “Beam Quality of the ATA Injector”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 925-928.
- M. Baschke, H. Podlech, and A. Schempp, “A Two-Stage Splitring-RFQ for High Current Ion Beams at Low Frequencies”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 941-942.
- J. E. Spencer, “Accelerator Diagnosis and Control by Neural Net”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1642-1645.
- G. von Holtey, W. Niessen, and P. Roudeau, “Synchrotron Radiation Masks for LEP2”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 454-457.
- J. H. Han et al., “Conditioning and High Power Test of the RF Guns at PITZ”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF026, pp. 357-359.
- E. Hartwig, “The AEG Compact Cyclotron”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69F04, pp. XX-XX.
- R. J. Briggs et al., “Beam Dynamics in the ETA and ATA 10 kA Linear Induction Accelerators-Observations and Issues”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3360-3365.
- S. Feher et al., “Quench Protection of SC Quadrupole Magnets”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6P001, pp. 3389-3391.
- M. Bickley and K. White, “The Integration of Two Control Systems”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPA12, pp. 2220-2222.
- R. L. Parise et al., “Development of Diffusion Bonded Joints of AA6061 Aluminum Alloy to AISI 316LN Stainless Steel for Sirius Planar Undulators”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3459-3462.
- C. D. Moore, R. Coleman, G. Goderre, and M. J. Yang, “Tevatron Extraction Modelling”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1498-1501.
- A. V. Aleksandrov et al., “High-Dynamic-Range Current Measurements in the Medium-Energy Beta Transport Line at the Spallation Neutron Source”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper TUP002, pp. 244-246.
- R. Legg, B. Dunham, S. Higgins, R. Kazimi, D. Kehne, and T. Oren, “Interactive Troubleshooting Guide for Accelerators”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P063, pp. 3755-3757.
- E. A. Hughes, T. Ring, and B. Taylor, “A Single Bunch Systrem for the Daresbury SRS”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2633-2636.
- F.-J. Decker, J. T. Seeman, and R. Brown, “Beam Size Measurements with Noninterceptive Off-Axis Screens”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2507-2510.
- R. N. Litunovsky and V. Nikolaev, “Central Region of 240 - cm Variable Energy Cyclotron”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper A-004, pp. XX-XX.
- S. Sierra et al., “LCLSII Fundamental Power Coupler Manufacturing Status and Lesson Learned”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 893-894.
- F. Varela et al., “TIP: An Umbrella Application for all SCADA-Based Applications for the CERN Technical Infrastructure”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 184-187.
- C. Sibley, “Machine Protection Strategies for High Power Accelerators”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROPB001, pp. 607-611.
- J. Lee et al., “Emittance Measurements at the PAL-XFEL Injector Test Facility”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 690-693.
- J. Preble et al., “SNS Cryomodule Performance”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROAA001, pp. 457-461.
- P. Alvarez, J. C. Bau, S. Deghaye, I. Kozsar, J. Serrano, and J. H. Lewis, “The CERN LHC Central Timing, a Vertical Slice”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper FOAA03, pp. 711-713.
- N. M. Cook et al., “Modeling of Capillary Discharge Plasmas for Wakefield Accelerators and Beam Transport”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1740-1743.
- F. S. Reinath, R. M. Richter, J. T. Tanabe, and E. Zajec, “A Cryogenic Pumping System Proposed for the Bevatron”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 690-694.
- A. Butterworth, L. Arnaudon, G. Beetham, E. Ciapala, J.-C. Juillard, and R. Olsen, “The LEP RF Trip and Beam Loss Diagnostics System”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPDO027, pp. 2004-2006.
- J. Choi et al., “Design of the PAL Test FEL Machine”, in Proc. 29th Int. Free Electron Laser Conf. (FEL'07), Novosibirsk, Russia, Aug. 2007, paper MOPPH061, pp. 149-151.
- G. Rehm, M. G. Abbott, C. Bloomer, and I. Uzun, “Synchronous Measurement of Stability of Electron Beam, X-ray Beam, Ground and Cavity Voltage”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD78, pp. 227-229.
- C. W. Potts and F. R. Brumwell, “The Zero Gradient Synchrotron Closed Orbit Position Monitoring System”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 918-920.
- T. B. Bolshakov, A. D. Petrov, and S. L. Lackey, “Synoptic Display - A Client-Server System for Graphical Data Representation”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP505, pp. XX-XX.
- S. G. Arutunian, N. M. Dobrovolski, M. R. Mailian, I. G. Sinenko, and I. E. Vasiniuk, “Vibrating Wire Scanner for Beam Profile Monitoring”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA97, pp. 2105-2107.
- S. A. Kheifets and S. A. Heifets, “Radiation of a Charge in a Perfectly Conducting Cylindrical Pipe with a Jump in its Cross Section”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH3-24, pp. 493-495.
- D. E. Nagle, “The LASL Meson Factory”, in Proc. 1964 Linear Accelerator Conf. (LINAC'64), Madison, WI, USA, Jul. 1964, paper PART1-7, pp. 94-107.
- W. Barletta, S. Chattopadhyay, A. A. Zholents, and M. Zolotorev, “Halo Particle Confinement in the VLHC using Optical Stochastic Cooling”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUOAF102, pp. 262-264.
- M. K. Sullivan, K. J. Bertsche, S. Bettoni, E. Paoloni, P. Raimondi, and P. Vobly, “A New Interaction Region Design for the Super-B Factory”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEB027, pp. 1581-1583.
- J. D. Jarvis et al., “Transverse Emittance of Diamond Field-Emitter Arrays”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUPPH014, pp. 262-264.
- M. Kreider et al., “`WhiteRabbit' - A novel, high precision timing system”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper FRCOMA01, pp. 192-194.
- C. Dickey et al., “EPICS at Duke University”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPA11, pp. 2217-2219.
- A. D. Shabalina, “Niobium Chronicles: Surface Quality Investigation and Recovery During Material Procurement for the PIP-II High Beta 650 MHz Cavities”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper WEPWB121, pp. 880-883.
- R. H. Miller, “Measurements of the SLAC Injector Emittance”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper II-05, pp. 65-71.
- K. Jacobs, S. Bradley, A. Carter, B. McAllister, C. Sibley, and F. Wang, “Real Time Dispersion Measurements at the MIT-Bates Linac”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P079, pp. 2099-2101.
- S.-Y. Teng, S.-H. Chen, W.-Y. Chiang, S.-W. Chou, and W. Lau, “Calculation for a compact laser plasma undulator beamline based on the experimental beam parameters at NCU”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL052, pp. 1870-1873.
- K. Batchelor, R. Chasman, and T. Werntz, “Measurements and Calculations on the 50-MeV Brookhaven Linac”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper II-01, pp. 28-33.
- H. Hotchi, S. Machida, and F. Noda, “Effects of Magnetic Field Tracking Errors on Beam Dynamics at J-PARC RCS”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN046, pp. 4078-4080.
- S. Myers, R. Olsen, and I. Wilson, “Hardware for the LEP Transverse Feedback System”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 751-754.
- H. N. Nakayama, T. Koga, K. Kojima, A. Natochii, and S. Vahsen, “Beam Background Measurements at SuperKEKB/Belle-II in 2020”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2532-2535.
- A. J. Jason, B. Blind, P. J. Channell, and T.-S. F. Wang, “Minimization of First-Turn Losses by Excited Neutrals in Charge-Changing Injection of Accumulator Rings”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1219-1222.
- C. Dickey, G. V. Karpov, J. Madey, A. S. Medvedko, E. I. Shubin, and N. I. Zinevich, “NMR System for Magnetic Field Measurements at the MARK-3 Free Electron Laser”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP009G, pp. 2541-2542.
Back to search