Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. Mamaev et al., “800-keV Electron Induction Injector with High Average Power”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P073, pp. 1263-1265.
[n] S. Kawasaki et al., “Ultrahigh-Brightness Microbeams: Considerations for Their Generation and Relevance to FEL”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1566-1569.
[n] PA. Chamouard, M. Olivier, G. Rommel, and A. Tkatchenko, “Description and Commissioning of MIMAS, Booster Storage Ring for Heavy and Polarized Ions”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 115-118.
[n] R. H. A. Farias, L. C. Jahnel, D. Macedo, F. S. Rafael, A. R. D. Rodrigues, and P. F. Tavares, “Orbit Measurement and Correction in the LNLS Synchrotron Light Source”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P078, pp. 2096-2098.
[n] P.-A. Chamouard and M. Olivier, “Improvement in the 20 MeV Beam Brightness at SATURNE”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper PUB02, pp. 372-375.
[n] W. Kuropka et al., “Commissioning of a Movable Bunch Compressor for Sub-fs Electron Bunches”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 695-698. doi:10.18429/JACoW-LINAC2022-THPOJO02
[n] V. M. Pugatch et al., “Micro-strip Metal Foil Detectors for the Beam Profile Monitoring”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper CTMM02, pp. XX-XX.
[n] P. Sunwong, P. Klysubun, T. Phimsen, S. Prawanta, and P. Sudmuang, “Magnet Design for Siam Photon Source II”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4361-4363. doi:10.18429/JACoW-IPAC2019-FRXXPLM2
[n] P. Sanchez Navarro, “Thermal Contact Conductance in a Typical Silicon Crystal Assembly Found in Particle Accelerators”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 353. doi:10.18429/JACoW-MEDSI2020-THOB01
[n] J. P. Potier, “Pulse to Pulse Modulation of the CERN PS Complex”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1518-1521.
[n] Y. Hosaka et al., “Mode-Locked Pulse Oscillation of a Self-Resonating Enhancement Optical Cavity”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1471-1474. doi:10.18429/JACoW-IPAC2019-TUPGW032
[n] E. Mahner, P. Kneisel, N. Pupeter, and G. M??ller, “Effect of Chemical Polishing on the Electron Field Emission of Niobium Samples and Cavities”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I51, pp. XX-XX.
[n] N. Pupeter, G. Mueller, E. Mahner, A. Matheisen, H. Piel, and D. Proch, “Sputtering of High Quality Niobium Films into 1.5 GHz Monocell Cavities”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2069-2071.
[n] P. I. Reinhardt-Nickoulin et al., “Emittance Measurements at the Exit of INR Linac”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPD055, pp. 668-670.
[n] B. A. Aminov, A. Borisov, S. K. Kolesov, M. Pekeler, C. Piel, and H. Piel, “Development of Low Level RF Control Systems for Superconducting Heavy Ion Linear Accelerators, Electron Synchrotrons and Storage Rings”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper WPAT068, unpublished.
[n] D. Wang et al., “CEPC circumference optimization”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 658-661. doi:10.18429/JACoW-IPAC2023-MOPL052
[n] A. I. Drozhdin, O. E. Krivosheev, and N. V. Mokhov, “Beam Loss and Collimation in the Fermilab 16 GeV Proton Driver”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH054, pp. 2572-2574.
[n] A. Denker et al., “Eye Tumour Therapy in Berlin”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA002, pp. 64-66.
[n] M. Traveria, “A New Design For An Active-Passive Septum Magnet”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP26C, pp. 1966-1968.
[n] T. L. Owens, K. S. Smith, and A. Zaltsman, “Control of Heavily-Beam-Loaded SNS-Ring Cavities”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB039, pp. 3380-3382.
[n] E. D. van Garderen et al., “Characterisation of the Systematic Effects of the Insertion Devices with Photon Beam Position Monitors”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPB26, pp. 126-128.
[n] C. E. Gonzalez-Ortiz, R. Ainsworth, and P. N. Ostroumov, “Compensation of Third-order Resonances in the High Intensity Regime”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 215-221. doi:10.18429/JACoW-HB2023-WEA2I1
[n] M. Crane et al., “Network Upgrade for the SLC: PEP-II Network”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3P049, pp. 2473-2475.
[n] J. D. Fuerst et al., “Cryogenic Testing and Initial Performance of a Helical Superconducting Undulator at the APS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1260-1262. doi:10.18429/JACoW-IPAC2018-TUPMF007
[n] F. S. Rafael, J. Apfelbaum, A. C. Lira, and J. A. Pomilio, “A High Voltage Resonant Converter for Pulsed Magnets”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1429-1432.
[n] M. V. Akopyan, V. K. Gorbunov, M. I. Gratchev, V. V. Yabzhanov, and I. I. Zaikovski, “Magnet's Power Supplies and Other Technological Equipment Control System for MMF Experiemntal AREA”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1215-1217.
[n] A. Goehl, T. Habermann, G. Mueller, H. Piel, and N. Pupeter, “The Role of Geometric Field Enhancement for the Enhanced Field Emission of Niobium”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP001L, pp. 2082-2084.
[n] Yu. G. Alenitsky et al., “High Power Cyclotron Complex for Neutron Production”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP005, pp. 2145-2147.
[n] M. H. R. Donald et al., “A Superconducting Synchrotron Design Study at the Rutherford Laboratory”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 703-707.
For LaTeX
Use Complete Form
For BibTeX
References
- G. Mamaev et al., “800-keV Electron Induction Injector with High Average Power”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7P073, pp. 1263-1265.
- S. Kawasaki et al., “Ultrahigh-Brightness Microbeams: Considerations for Their Generation and Relevance to FEL”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1566-1569.
- PA. Chamouard, M. Olivier, G. Rommel, and A. Tkatchenko, “Description and Commissioning of MIMAS, Booster Storage Ring for Heavy and Polarized Ions”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 115-118.
- R. H. A. Farias, L. C. Jahnel, D. Macedo, F. S. Rafael, A. R. D. Rodrigues, and P. F. Tavares, “Orbit Measurement and Correction in the LNLS Synchrotron Light Source”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P078, pp. 2096-2098.
- P.-A. Chamouard and M. Olivier, “Improvement in the 20 MeV Beam Brightness at SATURNE”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper PUB02, pp. 372-375.
- W. Kuropka et al., “Commissioning of a Movable Bunch Compressor for Sub-fs Electron Bunches”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 695-698.
- V. M. Pugatch et al., “Micro-strip Metal Foil Detectors for the Beam Profile Monitoring”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper CTMM02, pp. XX-XX.
- P. Sunwong, P. Klysubun, T. Phimsen, S. Prawanta, and P. Sudmuang, “Magnet Design for Siam Photon Source II”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4361-4363.
- P. Sanchez Navarro, “Thermal Contact Conductance in a Typical Silicon Crystal Assembly Found in Particle Accelerators”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 353.
- J. P. Potier, “Pulse to Pulse Modulation of the CERN PS Complex”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1518-1521.
- Y. Hosaka et al., “Mode-Locked Pulse Oscillation of a Self-Resonating Enhancement Optical Cavity”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1471-1474.
- E. Mahner, P. Kneisel, N. Pupeter, and G. M??ller, “Effect of Chemical Polishing on the Electron Field Emission of Niobium Samples and Cavities”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I51, pp. XX-XX.
- N. Pupeter, G. Mueller, E. Mahner, A. Matheisen, H. Piel, and D. Proch, “Sputtering of High Quality Niobium Films into 1.5 GHz Monocell Cavities”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2069-2071.
- P. I. Reinhardt-Nickoulin et al., “Emittance Measurements at the Exit of INR Linac”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper WEPPD055, pp. 668-670.
- B. A. Aminov, A. Borisov, S. K. Kolesov, M. Pekeler, C. Piel, and H. Piel, “Development of Low Level RF Control Systems for Superconducting Heavy Ion Linear Accelerators, Electron Synchrotrons and Storage Rings”, presented at the 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT068, unpublished.
- D. Wang et al., “CEPC circumference optimization”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL052, pp. 658-661.
- A. I. Drozhdin, O. E. Krivosheev, and N. V. Mokhov, “Beam Loss and Collimation in the Fermilab 16 GeV Proton Driver”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH054, pp. 2572-2574.
- A. Denker et al., “Eye Tumour Therapy in Berlin”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA002, pp. 64-66.
- M. Traveria, “A New Design For An Active-Passive Septum Magnet”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP26C, pp. 1966-1968.
- T. L. Owens, K. S. Smith, and A. Zaltsman, “Control of Heavily-Beam-Loaded SNS-Ring Cavities”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAB039, pp. 3380-3382.
- E. D. van Garderen et al., “Characterisation of the Systematic Effects of the Insertion Devices with Photon Beam Position Monitors”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper TUPB26, pp. 126-128.
- C. E. Gonzalez-Ortiz, R. Ainsworth, and P. N. Ostroumov, “Compensation of Third-order Resonances in the High Intensity Regime”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper WEA2I1, pp. 215-221.
- M. Crane et al., “Network Upgrade for the SLC: PEP-II Network”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3P049, pp. 2473-2475.
- J. D. Fuerst et al., “Cryogenic Testing and Initial Performance of a Helical Superconducting Undulator at the APS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1260-1262.
- F. S. Rafael, J. Apfelbaum, A. C. Lira, and J. A. Pomilio, “A High Voltage Resonant Converter for Pulsed Magnets”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1429-1432.
- M. V. Akopyan, V. K. Gorbunov, M. I. Gratchev, V. V. Yabzhanov, and I. I. Zaikovski, “Magnet's Power Supplies and Other Technological Equipment Control System for MMF Experiemntal AREA”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1215-1217.
- A. Goehl, T. Habermann, G. Mueller, H. Piel, and N. Pupeter, “The Role of Geometric Field Enhancement for the Enhanced Field Emission of Niobium”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP001L, pp. 2082-2084.
- Yu. G. Alenitsky et al., “High Power Cyclotron Complex for Neutron Production”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP005, pp. 2145-2147.
- M. H. R. Donald et al., “A Superconducting Synchrotron Design Study at the Rutherford Laboratory”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 703-707.
Back to search