Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] F. Voelker, T. Henderson, and J. Johnson, “An Array of 1- to 2-GHz Electrodes for Stochastic Cooling”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2262-2264.
[n] W. Namkung et al., “Status of PLS 2 GeV Linac Project”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 575-578.
[n] J. Kewisch et al., “Accelerator Simulation and Operation Via Identical Operational Interfaces”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1443-1446.
[n] W. Benker et al., “Investigations of Intense Pulsed Electron Beams From PSEUDO - SPARK Discharges”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1135-1138.
[n] P. Savage, J. K. Pozimski, A. Garbayo, A. P. Letchford, and D. S. Wilsher, “The Manufacture and Assembly of the FETS RFQ”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP053, pp. 3862-3864.
[n] S. J. Smith, R. Apsimon, G. Burt, S. Setiniyaz, and M. J. W. Southerby, “Multi-Objective Optimization of RF Structures”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1103-1106. doi:10.18429/JACoW-IPAC2021-MOPAB355
[n] S. Delchamps et al., “SSC Collider Dipole Magnet End Mechanical Design”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2185-2188.
[n] M. V. Fazio, B. Carlsten, C. Fortgang, E. Nelson, and K. Habiger, “Design for a One-Gigawatt, Annular-Beam Klystron”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THA20, pp. 785-787.
[n] P. Jines and B. Craft, “PLC Based Upgrades for the CAMD Linac and Storage Ring Control System”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEAP037, pp. XX-XX.
[n] F. Zimmermann et al., “Present Understanding of Electron Cloud Effects in the Large Hadron Collider”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB054, pp. 1727-1729.
[n] I. J. Kim, S. M. Choi, M. G. Hur, S. W. Kim, J. H. Park, and S. D. Yang, “The Solid Target Control System for the RFT-30 30 MeV Cyclotron in KAERI”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA071, pp. 241-243.
[n] B. Visentin, J. P. Charrier, and G. Congretel, “Change of RF Superconductivity Parameters Induced by Heat Treatment on Niobium Cavities”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH122, pp. 1056-1058.
[n] M. Fedurin et al., “Operation the Accelerator Test Facility linac transport beamline by using Artificial Intelegence and Machine Learning Methods”, presented at the IPAC'23, Venice, Italy, May 2023, paper THPL016, unpublished.
[n] P. Huelsmann, H.-W. Glock, H. Klein, M. Kurz, W. F. O. Mueller, and C. Peschke, “Quality Factor Measurements in Cavities with Mode Overlap”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2209-2212.
[n] S. R. Gysin, C. L. Schumann, and A. D. Petrov, “User Authentication for Role-Based Access Control”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPA12, pp. 111-113.
[n] G. E. McMichael, B. G. Chidley, R. M. Hutcheon, and T. Tran Ngoc, “RFQ1 Fabrication and Low Power RF Tuning”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1875-1878.
[n] H. R. Kremers, J. P. M. Beijers, S. Brandenburg, and S. Saminathan, “Systematic Comparison Between a Pepperpot and an ALLISON Emittance Meter”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper THCO-A02, pp. 204-207.
[n] P. Schmueser, “Properties and Practical Performance of SC Magnets in Accelerators”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 284-289.
[n] Y. Yamamoto et al., “Beam Commissioning Status of Superconducting Crab Cavities in KEKB”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOOCMH03, pp. 42-44.
[n] M. Stetter, J. Christiansen, K. Frank, U. Neuner, and R. Tkotz, “Plasma Lens Studies at Erlangen University”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1542-1545.
[n] A. Shalnov, N. Abramenko, B. Bogdanovich, M. Karetnikov, A. Nesterovich, and A. Puchkov, “Potentialities of Electron and Ion Beam Accelerators for Long-Lived Nuclear Waste Transmutation”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPR10, pp. 1143-1145.
[n] R. Kowalewicz et al., “Beam Test with the CERN Plasma Lens”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1539-1542.
[n] G. Le Dallic et al., “First Test Results from the New CERN Plasma Lens”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 343-346.
[n] T. Mattison et al., “Status of the SLC Damping Ring Kicker Systems”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2955-2958.
[n] M. Dehler, G. Scrimali, M. Lonza, R. Fortunati, S. Dordevic, and F. Marcellini, “Fast kickers for bunch by bunch feedbacks at SLS 2.0 and ELETTRA”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4817-4819. doi:10.18429/JACoW-IPAC2023-THPL149
[n] U. van Rienen, C. R. Bahls, J. Heller, and D. Zheng, “First Steps Towards a New Finite Element Solver for MOEVE PIC Tracking”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 260-264. doi:10.18429/JACoW-ICAP2018-TUPAG02
[n] H. Brueck et al., “Time Dependence of Persistent-Current Field Distortions in the Superconducting HERA Magnets”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 329-332.
[n] Y. Gao, T. G. Robertazzi, K. A. Brown, J. Morris, and R. H. Olsen, “A New Simulation Stucture to Improve Software Dependability in Collider-Accelerator Control Systems”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 300. doi:10.18429/JACoW-ICALEPCS2019-MOPHA045
[n] K. T. Hsu, K. K. Lin, and T. S. Ueng, “Tune and Bunch Length Measurements of SRRC Booster During Ramping”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1684-1687.
[n] D. B. Cline, Y. Fukui, and A. A. Garren, “Comparison of 6D Ring Cooler Schemes and Dipole Cooler for Mu+Mu- Collider Development”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS019, pp. 3038-3040.
[n] D. Wang et al., “CEPC circumference optimization”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 658-661. doi:10.18429/JACoW-IPAC2023-MOPL052
[n] I. I. Degtyarev, O. A. Liashenko, I. A. Yazynin, A. I. Blokhin, and V. I. Belyakov-Bodin, “Calculational Estimations of Neutron Yield from ADS Target”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH314, pp. 2796-2798.
[n] G. Velev et al., “A Conceptual Design of the 2+ MW LBNE Beam Absorber”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP297, pp. 2041-2043.
For LaTeX
Use Complete Form
For BibTeX
References
- F. Voelker, T. Henderson, and J. Johnson, “An Array of 1- to 2-GHz Electrodes for Stochastic Cooling”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2262-2264.
- W. Namkung et al., “Status of PLS 2 GeV Linac Project”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 575-578.
- J. Kewisch et al., “Accelerator Simulation and Operation Via Identical Operational Interfaces”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1443-1446.
- W. Benker et al., “Investigations of Intense Pulsed Electron Beams From PSEUDO - SPARK Discharges”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1135-1138.
- P. Savage, J. K. Pozimski, A. Garbayo, A. P. Letchford, and D. S. Wilsher, “The Manufacture and Assembly of the FETS RFQ”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPP053, pp. 3862-3864.
- S. J. Smith, R. Apsimon, G. Burt, S. Setiniyaz, and M. J. W. Southerby, “Multi-Objective Optimization of RF Structures”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1103-1106.
- S. Delchamps et al., “SSC Collider Dipole Magnet End Mechanical Design”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2185-2188.
- M. V. Fazio, B. Carlsten, C. Fortgang, E. Nelson, and K. Habiger, “Design for a One-Gigawatt, Annular-Beam Klystron”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THA20, pp. 785-787.
- P. Jines and B. Craft, “PLC Based Upgrades for the CAMD Linac and Storage Ring Control System”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper WEAP037, pp. XX-XX.
- F. Zimmermann et al., “Present Understanding of Electron Cloud Effects in the Large Hadron Collider”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB054, pp. 1727-1729.
- I. J. Kim, S. M. Choi, M. G. Hur, S. W. Kim, J. H. Park, and S. D. Yang, “The Solid Target Control System for the RFT-30 30 MeV Cyclotron in KAERI”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA071, pp. 241-243.
- B. Visentin, J. P. Charrier, and G. Congretel, “Change of RF Superconductivity Parameters Induced by Heat Treatment on Niobium Cavities”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH122, pp. 1056-1058.
- M. Fedurin et al., “Operation the Accelerator Test Facility linac transport beamline by using Artificial Intelegence and Machine Learning Methods”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL016, unpublished.
- P. Huelsmann, H.-W. Glock, H. Klein, M. Kurz, W. F. O. Mueller, and C. Peschke, “Quality Factor Measurements in Cavities with Mode Overlap”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2209-2212.
- S. R. Gysin, C. L. Schumann, and A. D. Petrov, “User Authentication for Role-Based Access Control”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPA12, pp. 111-113.
- G. E. McMichael, B. G. Chidley, R. M. Hutcheon, and T. Tran Ngoc, “RFQ1 Fabrication and Low Power RF Tuning”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1875-1878.
- H. R. Kremers, J. P. M. Beijers, S. Brandenburg, and S. Saminathan, “Systematic Comparison Between a Pepperpot and an ALLISON Emittance Meter”, in Proc. 18th Int. Workshop on ECR Ion Sources (ECRIS'08), Chicago, IL, USA, Sep. 2008, paper THCO-A02, pp. 204-207.
- P. Schmueser, “Properties and Practical Performance of SC Magnets in Accelerators”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 284-289.
- Y. Yamamoto et al., “Beam Commissioning Status of Superconducting Crab Cavities in KEKB”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOOCMH03, pp. 42-44.
- M. Stetter, J. Christiansen, K. Frank, U. Neuner, and R. Tkotz, “Plasma Lens Studies at Erlangen University”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1542-1545.
- A. Shalnov, N. Abramenko, B. Bogdanovich, M. Karetnikov, A. Nesterovich, and A. Puchkov, “Potentialities of Electron and Ion Beam Accelerators for Long-Lived Nuclear Waste Transmutation”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPR10, pp. 1143-1145.
- R. Kowalewicz et al., “Beam Test with the CERN Plasma Lens”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1539-1542.
- G. Le Dallic et al., “First Test Results from the New CERN Plasma Lens”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 343-346.
- T. Mattison et al., “Status of the SLC Damping Ring Kicker Systems”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2955-2958.
- M. Dehler, G. Scrimali, M. Lonza, R. Fortunati, S. Dordevic, and F. Marcellini, “Fast kickers for bunch by bunch feedbacks at SLS 2.0 and ELETTRA”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL149, pp. 4817-4819.
- U. van Rienen, C. R. Bahls, J. Heller, and D. Zheng, “First Steps Towards a New Finite Element Solver for MOEVE PIC Tracking”, in Proc. 13th International Computational Accelerator Physics Conference (ICAP'18), Key West, Florida, USA, Oct. 2018, pp. 260-264.
- H. Brueck et al., “Time Dependence of Persistent-Current Field Distortions in the Superconducting HERA Magnets”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 329-332.
- Y. Gao, T. G. Robertazzi, K. A. Brown, J. Morris, and R. H. Olsen, “A New Simulation Stucture to Improve Software Dependability in Collider-Accelerator Control Systems”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 300.
- K. T. Hsu, K. K. Lin, and T. S. Ueng, “Tune and Bunch Length Measurements of SRRC Booster During Ramping”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1684-1687.
- D. B. Cline, Y. Fukui, and A. A. Garren, “Comparison of 6D Ring Cooler Schemes and Dipole Cooler for Mu+Mu- Collider Development”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMS019, pp. 3038-3040.
- D. Wang et al., “CEPC circumference optimization”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL052, pp. 658-661.
- I. I. Degtyarev, O. A. Liashenko, I. A. Yazynin, A. I. Blokhin, and V. I. Belyakov-Bodin, “Calculational Estimations of Neutron Yield from ADS Target”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH314, pp. 2796-2798.
- G. Velev et al., “A Conceptual Design of the 2+ MW LBNE Beam Absorber”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP297, pp. 2041-2043.
Back to search