Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. Pavinato et al., “Development of a Digital LLRF Control System at LNL”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 966-968. doi:10.18429/JACoW-LINAC2016-THPLR048
[n] T. Lamy et al., “Experimental Activities with the LPSC Charge Breeder in the European Context”, in Proc. ECRIS'14, Nizhny Novgorod, Russia, Aug. 2014, paper WEOBMH01, pp. 120-126.
[n] A.Valishev (FNAL, USA), “Tevatron Collider Status and Plans”, in Proc. RuPAC'06, Novosibirsk, Russia, Sep. 2006, paper MOAO03, pp. XX-XX.
[n] G. Bisoffi et al., “Hardware Commissioning of the Renovated PIAVE Injector at INFN-LNL”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 949-952. doi:10.18429/JACoW-IPAC2019-MOPTS042
[n] N. Mueller, U. Bartz, M. Baschke, A. Schempp, and J. S. Schmidt, “Beam measurements at the Frankfurt Funneling Experiment”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD034, pp. 759-761.
[n] T. J. Bian et al., “Design study of CEPC Booster”, in Proc. eeFACT'16, Daresbury, UK, Oct. 2016, pp. 79-84. doi:10.18429/JACoW-eeFACT2016-TUT2H3
[n] J. F. Schmidt and W. Hillert, “Magnetic Field Parametrization for Efficient Spin Tracking with POLE”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 808-810. doi:10.18429/JACoW-IPAC2015-MOPHA014
[n] T. Thuillier et al., “High Intensity Ion Beams Prospects for Accelerators with PHOENIX 28 GHz”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI015, pp. 1744-1746.
[n] A. V. Eliseev et al., “Results of the Nuclotron Upgrade Program”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS013, pp. 2508-2510.
[n] P.V.Logachev, A.V.Akimov, A.V.Antoshin, P.A.Bak, Yu.M.Boimelshtain, D.Yu.Bolkhovitianov, R.Galimov, S.M.Gurov, E.A.Gusev, N.S.Dikansky, S.N.Klushev, N.Kh.Kot, A.A.Korepanov, I.L.Pivivarov, Yu.I.Semenov, A.N.Skrinsky, A.R.Frolov, A.S.Tsyganov, S.V.Shiya, “Status of VEPP-5 Injection Complex”, in Proc. RuPAC'06, Novosibirsk, Russia, Sep. 2006, paper MOAO10, pp. XX-XX.
[n] J. T. Stafford-Haworth, D. Kuchler, V. Toivanen, and J. Roehrich, “Boron Ion Beam Production with the Supernanogan ECR Ion Source for the CERN BIO-LEIR Facility”, in Proc. ECRIS'14, Nizhny Novgorod, Russia, Aug. 2014, paper THOMMH01, pp. 132-134.
[n] A. Calanna et al., “Upgrade of the LNS Superconducting Cyclotron”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3779-3781. doi:10.18429/JACoW-IPAC2015-THPF037
[n] H. Damerau, S. Hancock, T. Kroyer, E. Mahner, and M. Schokker, “Electron Cloud Mitigation by Fast Bunch Compression in the CERN PS”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP050, pp. 1658-1660.
[n] M. I. Frankl et al., “Energy Deposition Studies and Analysis of the Quench Behavior in the Case of Asynchronous Dumps During 6.5 TeV LHC Proton Beam Operation”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 736-739. doi:10.18429/JACoW-IPAC2018-TUPAF028
[n] J. F. Muratore et al., “Test Results for LHC Insertion Region Dipole Magnets”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT050, pp. 3106-3108.
[n] O. Geithner et al., “Ion-optical Measurements at CRYRING@ESR during Commissioning”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3161-3164. doi:10.18429/JACoW-IPAC2018-THPAF077
[n] H. D. Zhang, A. Jeff, V. Tzoganis, and C. P. Welsch, “Development of a Supersonic Gas-jet Monitor to Measure Beam Profile Non-destructively”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1157-1159. doi:10.18429/JACoW-IPAC2015-MOPWI006
[n] T. Junquera, “The SPIRAL 2 Project: Construction Progress and Recent Developments on the SC Linac Driver”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper MO401, pp. XX-XX.
[n] M. Cavenago et al., “A RFQ Cooler Development”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3627-3630. doi:10.18429/JACoW-IPAC2018-THPAL008
[n] L. Ferrari, A. Palmieri, and A. Pisent, “Thermo-Mechanical Calculations for the SPES RFQ”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper WEPB13, pp. 219-221.
[n] T. Bass, G. K. Davis, C. Grenoble, and M. Stirbet, “Standardization of CEBAF 12 GeV Upgrade Cavity Testing”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC088, pp. 2420-2422.
For LaTeX
Use Complete Form
For BibTeX
References
- S. Pavinato et al., “Development of a Digital LLRF Control System at LNL”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 966-968.
- T. Lamy et al., “Experimental Activities with the LPSC Charge Breeder in the European Context”, in Proc. 21st Int. Workshop on ECR Ion Sources (ECRIS'14), Nizhny Novgorod, Russia, Aug. 2014, paper WEOBMH01, pp. 120-126.
- A.Valishev (FNAL, USA), “Tevatron Collider Status and Plans”, in Proc. 20th Russian Particle Accelerator Conf. on Charged Particle Accelerators (RuPAC'06), Novosibirsk, Russia, Sep. 2006, paper MOAO03, pp. XX-XX.
- G. Bisoffi et al., “Hardware Commissioning of the Renovated PIAVE Injector at INFN-LNL”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 949-952.
- N. Mueller, U. Bartz, M. Baschke, A. Schempp, and J. S. Schmidt, “Beam measurements at the Frankfurt Funneling Experiment”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD034, pp. 759-761.
- T. J. Bian et al., “Design study of CEPC Booster”, in Proc. 58th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders (eeFACT'16), Daresbury, UK, Oct. 2016, pp. 79-84.
- J. F. Schmidt and W. Hillert, “Magnetic Field Parametrization for Efficient Spin Tracking with POLE”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 808-810.
- T. Thuillier et al., “High Intensity Ion Beams Prospects for Accelerators with PHOENIX 28 GHz”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI015, pp. 1744-1746.
- A. V. Eliseev et al., “Results of the Nuclotron Upgrade Program”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS013, pp. 2508-2510.
- P.V.Logachev, A.V.Akimov, A.V.Antoshin, P.A.Bak, Yu.M.Boimelshtain, D.Yu.Bolkhovitianov, R.Galimov, S.M.Gurov, E.A.Gusev, N.S.Dikansky, S.N.Klushev, N.Kh.Kot, A.A.Korepanov, I.L.Pivivarov, Yu.I.Semenov, A.N.Skrinsky, A.R.Frolov, A.S.Tsyganov, S.V.Shiya, “Status of VEPP-5 Injection Complex”, in Proc. 20th Russian Particle Accelerator Conf. on Charged Particle Accelerators (RuPAC'06), Novosibirsk, Russia, Sep. 2006, paper MOAO10, pp. XX-XX.
- J. T. Stafford-Haworth, D. Kuchler, V. Toivanen, and J. Roehrich, “Boron Ion Beam Production with the Supernanogan ECR Ion Source for the CERN BIO-LEIR Facility”, in Proc. 21st Int. Workshop on ECR Ion Sources (ECRIS'14), Nizhny Novgorod, Russia, Aug. 2014, paper THOMMH01, pp. 132-134.
- A. Calanna et al., “Upgrade of the LNS Superconducting Cyclotron”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3779-3781.
- H. Damerau, S. Hancock, T. Kroyer, E. Mahner, and M. Schokker, “Electron Cloud Mitigation by Fast Bunch Compression in the CERN PS”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP050, pp. 1658-1660.
- M. I. Frankl et al., “Energy Deposition Studies and Analysis of the Quench Behavior in the Case of Asynchronous Dumps During 6.5 TeV LHC Proton Beam Operation”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 736-739.
- J. F. Muratore et al., “Test Results for LHC Insertion Region Dipole Magnets”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT050, pp. 3106-3108.
- O. Geithner et al., “Ion-optical Measurements at CRYRING@ESR during Commissioning”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3161-3164.
- H. D. Zhang, A. Jeff, V. Tzoganis, and C. P. Welsch, “Development of a Supersonic Gas-jet Monitor to Measure Beam Profile Non-destructively”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1157-1159.
- T. Junquera, “The SPIRAL 2 Project: Construction Progress and Recent Developments on the SC Linac Driver”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper MO401, pp. XX-XX.
- M. Cavenago et al., “A RFQ Cooler Development”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3627-3630.
- L. Ferrari, A. Palmieri, and A. Pisent, “Thermo-Mechanical Calculations for the SPES RFQ”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper WEPB13, pp. 219-221.
- T. Bass, G. K. Davis, C. Grenoble, and M. Stirbet, “Standardization of CEBAF 12 GeV Upgrade Cavity Testing”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC088, pp. 2420-2422.
Back to search