Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. Benedetti et al., “Commissioning of the Alba Injector With 67 Mev Single Klystron Linac”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2905-2907. doi:10.18429/JACoW-IPAC2016-WEPOW033
[n] N. Tokuda, H. Sato, K. Marutsuka, and M. J. Shirakata, “THE MAGNET ALIGNMENT OF THE KEK-PS MAIN RING”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper TUP054, pp. XX-XX.
[n] K. Fant et al., “The Next Linear Collider Test Accelerator's RF Pulse Compression and Transmission Systems”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP089L, pp. 2062-2064.
[n] P. Ausset, L. Badano, J. Bosser, P. A. Chamouard, P. Knaus, and S. Rossi, “A Betatron Core for Optimised Slow Extraction in a Proton/Ion Medical Synchrotron”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP10H, pp. 2368-2370.
[n] H. Podlech et al., “A 70-MeV Proton Linac for the FAIR Facility Based on CH - Cavities”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TH1004, pp. 526-530.
[n] S. Schaffner, M. Bickley, L. Clancy, K. White, and B. Bevins, “Knowledge-based Software Management”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP532, pp. XX-XX.
[n] S. Ben?¡tez Berrocal et al., “Beam Loss Localisation with an Optical Beam Loss Monitor in the CLEAR Facility at CERN”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 351-354. doi:10.18429/JACoW-IPAC2022-MOPOPT045
[n] J. C. Huang, C.-H. Chang, C.-S. Hwang, C. JunTune, and F.-Y. Lin, “Field Correction Results from NSRRC Elliptically Polarized Undulator 46”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC177, pp. 3317-3319.
[n] U. Wienands, M. H. Donald, and M. E. Biagini, “Betatron-function Measurement in Lattices with 90?? Sections”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI003, pp. 1202-1204.
[n] B. S. Lee et al., “Inductive Adder Kicker Modulator for DARHT-II”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUC10, pp. 512-514.
[n] R. Broomfield, M. Heiniger, T. Korhonen, and T. Pal, “Database Applications for Control System Hardware Management”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP530, pp. XX-XX.
[n] D. B. Shwartz et al., “New Quadrupoles Installed at VEPP-2000 for High Energy Operation Without Final Focus”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 319-322. doi:10.18429/JACoW-RUPAC2018-WEPSB17
[n] C. I. Briegel et al., “ACSys in a Box”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMU039, pp. 522-524.
[n] L. H. Yu, “Orbit Stability and Feedback Control in Synchrotron Radiation Rings”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 54-60.
[n] H. Yamaguchi et al., “Operation pressure and lifetime improvement of bialkali photocathodes via graphene protection”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPA013, unpublished.
[n] J. Teichert et al., “Status of the SRF Gun Operation at ELBE”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper WEPB23, pp. 453-456.
[n] W. Reass and R. F. Gribble, “Improved Tuning Methods for Converter-Modulators”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS026, pp. 2391-2393.
[n] S. Cunningham, R. Clarken, and A. C. Starritt, “A Compact Weather Station for Monitoring Environmental Effects on Beam Properties and Equipment”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 30-32. doi:10.18429/JACoW-IBIC2015-MOPB002
[n] M. R. Buckner, M. Cappiello, E. Pitcher, and H. O, “Medical Isotope Production with the Accelerator Production of Tritium APT Facility”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4099, pp. 636-638.
For LaTeX
Use Complete Form
For BibTeX
References
- G. Benedetti et al., “Commissioning of the Alba Injector With 67 Mev Single Klystron Linac”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2905-2907.
- N. Tokuda, H. Sato, K. Marutsuka, and M. J. Shirakata, “THE MAGNET ALIGNMENT OF THE KEK-PS MAIN RING”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper TUP054, pp. XX-XX.
- K. Fant et al., “The Next Linear Collider Test Accelerator's RF Pulse Compression and Transmission Systems”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP089L, pp. 2062-2064.
- P. Ausset, L. Badano, J. Bosser, P. A. Chamouard, P. Knaus, and S. Rossi, “A Betatron Core for Optimised Slow Extraction in a Proton/Ion Medical Synchrotron”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP10H, pp. 2368-2370.
- H. Podlech et al., “A 70-MeV Proton Linac for the FAIR Facility Based on CH - Cavities”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper TH1004, pp. 526-530.
- S. Schaffner, M. Bickley, L. Clancy, K. White, and B. Bevins, “Knowledge-based Software Management”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP532, pp. XX-XX.
- S. Ben?¡tez Berrocal et al., “Beam Loss Localisation with an Optical Beam Loss Monitor in the CLEAR Facility at CERN”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 351-354.
- J. C. Huang, C.-H. Chang, C.-S. Hwang, C. JunTune, and F.-Y. Lin, “Field Correction Results from NSRRC Elliptically Polarized Undulator 46”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC177, pp. 3317-3319.
- U. Wienands, M. H. Donald, and M. E. Biagini, “Betatron-function Measurement in Lattices with 90?? Sections”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI003, pp. 1202-1204.
- B. S. Lee et al., “Inductive Adder Kicker Modulator for DARHT-II”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper TUC10, pp. 512-514.
- R. Broomfield, M. Heiniger, T. Korhonen, and T. Pal, “Database Applications for Control System Hardware Management”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP530, pp. XX-XX.
- D. B. Shwartz et al., “New Quadrupoles Installed at VEPP-2000 for High Energy Operation Without Final Focus”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 319-322.
- C. I. Briegel et al., “ACSys in a Box”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMU039, pp. 522-524.
- L. H. Yu, “Orbit Stability and Feedback Control in Synchrotron Radiation Rings”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 54-60.
- H. Yamaguchi et al., “Operation pressure and lifetime improvement of bialkali photocathodes via graphene protection”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA013, unpublished.
- J. Teichert et al., “Status of the SRF Gun Operation at ELBE”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper WEPB23, pp. 453-456.
- W. Reass and R. F. Gribble, “Improved Tuning Methods for Converter-Modulators”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS026, pp. 2391-2393.
- S. Cunningham, R. Clarken, and A. C. Starritt, “A Compact Weather Station for Monitoring Environmental Effects on Beam Properties and Equipment”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 30-32.
- M. R. Buckner, M. Cappiello, E. Pitcher, and H. O, “Medical Isotope Production with the Accelerator Production of Tritium APT Facility”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4099, pp. 636-638.
Back to search