Warning
Some papers titles are all uppercase, you must correct this before using this reference.
Favourites
For Word
[n] Z. Insepov, A. Hassanein, and D. Swenson, “Computer Simulation of Surface Modification with Ion Beams”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP51, pp. 363-365.
[n] Y. Iwashita, H. Tongu, H. Hayano, T. Saeki, and K. Watanabe, “Updates on R&D of Nondestructive Inspection Systems for SRF Cavities”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO032, pp. 447-449.
[n] L. Kang et al., “Key Technologies for Remote Detection of CSNS Radiation Environment”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2584-2586. doi:10.18429/JACoW-IPAC2019-WEPGW046
[n] W. Schmidt, “High Power Klystrons for High Energy Physics Research Applications”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper THP0035, pp. 424-426.
[n] X. J. Nie et al., “Structure Design of a Multi-Wire Target”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 92-94. doi:10.18429/JACoW-MEDSI2018-TUPH27
[n] L. M. Bollinger et al., “First Operational Tests of the Positive-Ion Injector for ATLAS”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1120-1123.
[n] G. Ganetis et al., “Misalignment Evaluation of Superconducting Magnets in the Relativistic Heavy Ion Collider”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP007G, pp. 2222-2224.
[n] E. Demmel and W. Schmidt, “High Power Klystrons for High Energy Physics Research Applications”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3432-3435.
[n] J. X. Chen, L. Kang, and J. B. Yu, “Research of the Chinese Spallation Neutron Source Stripper Foil”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4562-4564. doi:10.18429/JACoW-IPAC2017-THPVA054
[n] J. P. Wozniak, S. Deghaye, and G. Kruk, “New Wave of Component Reuse with Spring Framework - AP Case Study”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEA004, pp. 367-369.
[n] K. M. Terwilliger et al., “Acceleration of Polarized Protons in the Brookhaven AGS”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2031-2034.
[n] J. Lundquist, F. Curbis, G. Goetzke, E. Mansten, and S. Werin, “FEL Power Profile Predictions with Image-Based Machine Learning at FLASH”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP6014, unpublished.
[n] A. Schempp, B. Hofmann, and L. Brendel, “Design of A 352 MHz-Proton-RFQ for GSI”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP11, pp. 620-622.
[n] Y. Yang, A. Nassiri, T. L. Smith, G. J. Waldschmidt, G. Wu, and H. Wang, “Mode Damping Measurement for the APS Deflecting Cavity”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPAC02, pp. 787-789.
[n] W. Merz, C. Ankenbrandt, and K. Koepke, “Transition Jump System for the Fermilab Booster”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1343-1346.
[n] A. V. Zlobin and I. Novitski, “Development and Comparison of Mechanical Structures for FNAL 15 T Nb3Sn Dipole Demonstrator”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 137-139. doi:10.18429/JACoW-NAPAC2016-MOPOB30
[n] J. Bywater, T. Khoe, R. Lari, C. Potts, W. Praeg, and L. Ratner, “A Pulsed Quadrupole System for Preventing Depolarization”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 869-872.
[n] G. Y. Wang, L. Kang, J. B. Yu, J. S. Zhang, and J. X. Chen, “DESIGN OF A LAYERED HIGH PRECISION MAGNET GIRDER”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 277-279. doi:10.18429/JACoW-MEDSI2018-WEPH32
[n] A. S. Plastun, Z. A. Conway, B. Mustapha, and P. N. Ostroumov, “Design of the Room-Temperature Front-End for a Multi-Ion Linac Injector”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 73-75. doi:10.18429/JACoW-NAPAC2016-MOB4CO04
[n] Y. I. Alexahin, “Design of Muon Collider Lattices”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 69-72. doi:10.18429/JACoW-NAPAC2016-MOB4CO03
[n] A. Xiao and M. Borland, “Beam Loss Simulation and Collimator System Configurations for the Advanced Photon Source Upgrade”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 943-945. doi:10.18429/JACoW-NAPAC2016-WEPOB22
[n] A. X. Wang et al., “The Deformation-Stress Simulation and Measurement of Titanium Foil Strip for Hadron Monitor”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4187-4189. doi:10.18429/JACoW-IPAC2019-THPTS037
For LaTeX
Use Complete Form
For BibTeX
References
- Z. Insepov, A. Hassanein, and D. Swenson, “Computer Simulation of Surface Modification with Ion Beams”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP51, pp. 363-365.
- Y. Iwashita, H. Tongu, H. Hayano, T. Saeki, and K. Watanabe, “Updates on R&D of Nondestructive Inspection Systems for SRF Cavities”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO032, pp. 447-449.
- L. Kang et al., “Key Technologies for Remote Detection of CSNS Radiation Environment”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2584-2586.
- W. Schmidt, “High Power Klystrons for High Energy Physics Research Applications”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper THP0035, pp. 424-426.
- X. J. Nie et al., “Structure Design of a Multi-Wire Target”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 92-94.
- L. M. Bollinger et al., “First Operational Tests of the Positive-Ion Injector for ATLAS”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1120-1123.
- G. Ganetis et al., “Misalignment Evaluation of Superconducting Magnets in the Relativistic Heavy Ion Collider”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP007G, pp. 2222-2224.
- E. Demmel and W. Schmidt, “High Power Klystrons for High Energy Physics Research Applications”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3432-3435.
- J. X. Chen, L. Kang, and J. B. Yu, “Research of the Chinese Spallation Neutron Source Stripper Foil”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4562-4564.
- J. P. Wozniak, S. Deghaye, and G. Kruk, “New Wave of Component Reuse with Spring Framework - AP Case Study”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEA004, pp. 367-369.
- K. M. Terwilliger et al., “Acceleration of Polarized Protons in the Brookhaven AGS”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2031-2034.
- J. Lundquist, F. Curbis, G. Goetzke, E. Mansten, and S. Werin, “FEL Power Profile Predictions with Image-Based Machine Learning at FLASH”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP6014, this conference.
- A. Schempp, B. Hofmann, and L. Brendel, “Design of A 352 MHz-Proton-RFQ for GSI”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper THP11, pp. 620-622.
- Y. Yang, A. Nassiri, T. L. Smith, G. J. Waldschmidt, G. Wu, and H. Wang, “Mode Damping Measurement for the APS Deflecting Cavity”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPAC02, pp. 787-789.
- W. Merz, C. Ankenbrandt, and K. Koepke, “Transition Jump System for the Fermilab Booster”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1343-1346.
- A. V. Zlobin and I. Novitski, “Development and Comparison of Mechanical Structures for FNAL 15 T Nb3Sn Dipole Demonstrator”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 137-139.
- J. Bywater, T. Khoe, R. Lari, C. Potts, W. Praeg, and L. Ratner, “A Pulsed Quadrupole System for Preventing Depolarization”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 869-872.
- G. Y. Wang, L. Kang, J. B. Yu, J. S. Zhang, and J. X. Chen, “DESIGN OF A LAYERED HIGH PRECISION MAGNET GIRDER”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 277-279.
- A. S. Plastun, Z. A. Conway, B. Mustapha, and P. N. Ostroumov, “Design of the Room-Temperature Front-End for a Multi-Ion Linac Injector”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 73-75.
- Y. I. Alexahin, “Design of Muon Collider Lattices”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 69-72.
- A. Xiao and M. Borland, “Beam Loss Simulation and Collimator System Configurations for the Advanced Photon Source Upgrade”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 943-945.
- A. X. Wang et al., “The Deformation-Stress Simulation and Measurement of Titanium Foil Strip for Hadron Monitor”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4187-4189.
Back to search