Favourites
For Word
[n] D. L. Smith et al., “COBRA Accelerator for Sandia ICF Diode Research at Cornell University”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAE07, pp. 1204-1206.
[n] H. Piekarz, S. Hays, Y. Huang, and V. D. Shiltsev, “Design Considerations of Fast-cycling Synchrotrons Based on Superconducting Transmission Line Magnets”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC101, pp. 301-303.
[n] J. Geel and A. J. J. Franken, “RF System for a Compact Isochronous Cyclotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 461-465.
[n] J. T. Bradley III, D. Rees, R. S. Przeklasa, and M. C. Scott, “Design, Construction and Operational Results of the IGBT Controlled Solid State Modulator High Voltage Power Supply Used in the High Power RF Systems of the Low Energy Demonstration Accelerator of the Accelerator Production of Tritium APT Project”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4071, pp. 561-563.
[n] D. McGinnis, V. K. Bharadwaj, and J. Marriner, “Coupled Bunch Dipole Mode Measurements of Accelerating Beam in the Fermilab Booster”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1255-1258.
[n] M. P. Kelly, M. Kedzie, K. W. Shepard, and G. Zinkann, “Cold Tests of a Spoke Cavity Prototype for RIA”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH117, pp. 1047-1049.
[n] K. W. Shepard et al., “Operational Status of the Uranium Beam Upgrade of the ATLAS Accelerator”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1694-1697.
[n] W. Maier et al., “The Novel Optical Notch Filter for Stochastic Cooling at the ESR”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper WEPPO19, pp. 142-145.
[n] Y. Xiao, “CEPC Civil Engineering Design”, in Proc. eeFACT'18, Hong Kong, China, Sep. 2018, pp. 264. doi:10.18429/JACoW-eeFACT2018-WEPAB02
[n] E. Wright et al., “Development of a 10-MW, L-Band, Multiple-Beam Klystron for TESLA”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE120, pp. 2337-2339.
[n] D. Stratakis, J. P. Morgan, M. J. Syphers, A. Fiedler, S-C. Kim, and M. Korostelev, “Towards commissioning the Fermilab Muon g-2 Experiment”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4505-4508. doi:10.18429/JACoW-IPAC2017-THPVA033
[n] A. Veeramani and K. E. Tetmeyer, “Interfacing EPICS IOC and LabVIEW for FPGA Enabled COTS Hardware”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper TUX01, pp. 43-45.
[n] H. Ogawa, N. Sei, and K. Yamada, “Characteristics of Inverse Compton X-Rays Generated Inside the NIJI-IV Free Electron Laser Oscillators”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper TUPA26, pp. 246-249.
[n] C. D. Ziomek, “Adaptive Feedforward in the LANL RF Control System”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-28, pp. 683-685.
[n] J. Van Zeijts and R. Lee, “An Online Longitudinal Vertex and Bunch Spectrum Monitor for RHIC”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT184, pp. 2882-2884.
[n] L. Giannessi et al., “Future Seeding Experiments at SPARC”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH024, pp. 95-97.
[n] B. H. Choi, K. S. Kim, Y. S. Cho, J. M. Han, W. S. Song, and Y. J. Kim, “A 3.0MeV KOMAC/KTF RFQ Linac”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUD01, pp. 542-544.
[n] S. T. Melnychuk, T. W. Debiak, G. Gammel, and J. J. Sredniawski, “Recent Developments with Multicusp Ion Sources at Grumman”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-16, pp. 398-400.
[n] D. P. Missiaen et al., “Geometry of the LHC Short Straight Sections Before Installation in the Tunnel: Resulting Aperture, Axis and BPM Positioning”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN077, pp. 335-337.
[n] L. Tsai, T.-C. Fan, S. Y. Perng, and D.-J. Wang, “Precise Positioning of Magnetic Field Centers of Quadrupole Magnets on the Girder”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA081, pp. 749-751.
[n] Z. Zhang, D. Z. Chen, D. Li, M. R. Pan, and C. Zuo, “3D Numerical Simulation of Extraction of a Large-power Negative Ion Source”, in Proc. ICAP'15, Shanghai, China, Oct. 2015, pp. 103-105. doi:10.18429/JACoW-ICAP2015-WEP20
[n] B. Dwersteg et al., “Superconducting Cavities for HERA”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1281-1284.
[n] O. A. Shcherbakov, E. M. Ivanov, G. F. Mikheev, G. A. Petrov, G. A. Riabov, and A. S. Vorobyev, “Spallation Neutron Source at the 1 Gev Synchrocyclotron of PNPI”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 90-94. doi:10.18429/JACoW-RUPAC2016-WEZMH01
[n] K. A. Young, G. O. Bolme, J. T. M. Lyles, M. T. Lynch, E. P. Partridge, and D. Rees, “LANSCE 201 MHz and 805 MHz RF System Experience”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS033, pp. 2412-2414.
For LaTeX
Use Complete Form
For BibTeX
References
- D. L. Smith et al., “COBRA Accelerator for Sandia ICF Diode Research at Cornell University”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAE07, pp. 1204-1206.
- H. Piekarz, S. Hays, Y. Huang, and V. D. Shiltsev, “Design Considerations of Fast-cycling Synchrotrons Based on Superconducting Transmission Line Magnets”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC101, pp. 301-303.
- J. Geel and A. J. J. Franken, “RF System for a Compact Isochronous Cyclotron”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 461-465.
- J. T. Bradley III, D. Rees, R. S. Przeklasa, and M. C. Scott, “Design, Construction and Operational Results of the IGBT Controlled Solid State Modulator High Voltage Power Supply Used in the High Power RF Systems of the Low Energy Demonstration Accelerator of the Accelerator Production of Tritium APT Project”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4071, pp. 561-563.
- D. McGinnis, V. K. Bharadwaj, and J. Marriner, “Coupled Bunch Dipole Mode Measurements of Accelerating Beam in the Fermilab Booster”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1255-1258.
- M. P. Kelly, M. Kedzie, K. W. Shepard, and G. Zinkann, “Cold Tests of a Spoke Cavity Prototype for RIA”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH117, pp. 1047-1049.
- K. W. Shepard et al., “Operational Status of the Uranium Beam Upgrade of the ATLAS Accelerator”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1694-1697.
- W. Maier et al., “The Novel Optical Notch Filter for Stochastic Cooling at the ESR”, in Proc. 9th Workshop on Beam Cooling and Related Topics (COOL'13), Mürren, Switzerland, Jun. 2013, paper WEPPO19, pp. 142-145.
- Y. Xiao, “CEPC Civil Engineering Design”, in Proc. 62nd ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders (eeFACT'18), Hong Kong, China, Sep. 2018, pp. 264.
- E. Wright et al., “Development of a 10-MW, L-Band, Multiple-Beam Klystron for TESLA”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE120, pp. 2337-2339.
- D. Stratakis, J. P. Morgan, M. J. Syphers, A. Fiedler, S-C. Kim, and M. Korostelev, “Towards commissioning the Fermilab Muon g-2 Experiment”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4505-4508.
- A. Veeramani and K. E. Tetmeyer, “Interfacing EPICS IOC and LabVIEW for FPGA Enabled COTS Hardware”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper TUX01, pp. 43-45.
- H. Ogawa, N. Sei, and K. Yamada, “Characteristics of Inverse Compton X-Rays Generated Inside the NIJI-IV Free Electron Laser Oscillators”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper TUPA26, pp. 246-249.
- C. D. Ziomek, “Adaptive Feedforward in the LANL RF Control System”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-28, pp. 683-685.
- J. Van Zeijts and R. Lee, “An Online Longitudinal Vertex and Bunch Spectrum Monitor for RHIC”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT184, pp. 2882-2884.
- L. Giannessi et al., “Future Seeding Experiments at SPARC”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH024, pp. 95-97.
- B. H. Choi, K. S. Kim, Y. S. Cho, J. M. Han, W. S. Song, and Y. J. Kim, “A 3.0MeV KOMAC/KTF RFQ Linac”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper TUD01, pp. 542-544.
- S. T. Melnychuk, T. W. Debiak, G. Gammel, and J. J. Sredniawski, “Recent Developments with Multicusp Ion Sources at Grumman”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-16, pp. 398-400.
- D. P. Missiaen et al., “Geometry of the LHC Short Straight Sections Before Installation in the Tunnel: Resulting Aperture, Axis and BPM Positioning”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN077, pp. 335-337.
- L. Tsai, T.-C. Fan, S. Y. Perng, and D.-J. Wang, “Precise Positioning of Magnetic Field Centers of Quadrupole Magnets on the Girder”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA081, pp. 749-751.
- Z. Zhang, D. Z. Chen, D. Li, M. R. Pan, and C. Zuo, “3D Numerical Simulation of Extraction of a Large-power Negative Ion Source”, in Proc. 12th Int. Computational Accelerator Physics Conf. (ICAP'15), Shanghai, China, Oct. 2015, pp. 103-105.
- B. Dwersteg et al., “Superconducting Cavities for HERA”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1281-1284.
- O. A. Shcherbakov, E. M. Ivanov, G. F. Mikheev, G. A. Petrov, G. A. Riabov, and A. S. Vorobyev, “Spallation Neutron Source at the 1 Gev Synchrocyclotron of PNPI”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 90-94.
- K. A. Young, G. O. Bolme, J. T. M. Lyles, M. T. Lynch, E. P. Partridge, and D. Rees, “LANSCE 201 MHz and 805 MHz RF System Experience”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS033, pp. 2412-2414.
Back to search