Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Schwartz, R. P. Johnson, S. A. Kahn, and M. Kuchnir, “Multi-purpose Fiber Optic Sensors for HTS Magnets”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPD023, pp. 2458-2460.
[n] G. Vanbavinckhove et al., “Geometry and Optics of the Electrostatic ELENA Transfer Lines”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO051, pp. 1985-1987.
[n] K. Yoshii, K. Nakamura, M. Uesaka, T. Watanabe, and T. Ueda, “DIAGNOSTICS OF SUB-PICOSECOND ELECTRON PULSE BY THE FLUCTUATION METHOD”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper TUP043, pp. XX-XX.
[n] R. D. Kephart, “SRF Cavity Research for Project X”, in Proc. HB'12, Beijing, China, Sep. 2012, paper THO3B03, pp. 541-545.
[n] M. Capstick, C. Rossi, and S. Doebert, “Design, testing, and validating the CLIC module pre-alignment and alignment systems”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 800-802. doi:10.18429/JACoW-IPAC2023-MOPL101
[n] J. Mammosser and J. F. Benesch, “Mechanical Results of the CEBAF Cavity Series Production”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 781-784.
[n] H. G. Blosser, M. Reiser, and M. M. Gordon, “Central - Region Studies for the MSU Cyclotron”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63E04, pp. XX-XX.
[n] E. Plouviez et al., “Cleaning of Parasitic Bunches for Time Structured Filling of the ESRF Storage Ring During Top Up Operation”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1774-1777. doi:10.18429/JACoW-IPAC2017-TUPIK041
[n] C. Hovater et al., “Commissioning the JLab LERF Cryomodule Test Facility”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 973-977. doi:10.18429/JACoW-SRF2019-THP049
[n] P. Messmer et al., “Simulation-driven Optimization of Heavy-ion Production in ECR Sources”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FROBAB01, pp. 3786-3788.
[n] L. Martin, D. J. Kelliher, and S. L. Sheehy, “Can a Paul Ion Trap Be Used to Investigate Nonlinear Quasi-Integrable Optics?”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3251-3254. doi:10.18429/JACoW-IPAC2019-WEPTS056
[n] M. A. Baylac et al., “Operation Of The Versatile Accelerator Driving the Low Power ADS GUINEVERE at SCKCEN”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP100, pp. 659-661.
[n] M. Lindroos et al., “The ESS Accelerator”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper FRIOB06, pp. 994-998.
[n] S. Jin, J. Gao, T. Omori, and P. Sievers, “Numerical Analysis of Stresses for the Target of the ILC 300 Hz Conventional Positron Source”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3838-3840. doi:10.18429/JACoW-IPAC2016-THPOR028
[n] G. de Rijk, “Normal-Conducting Separation and Compensation Dipoles for the LHC Experimental Insertions”, in Proc. RuPAC'06, Novosibirsk, Russia, Sep. 2006, paper MOHP01, pp. XX-XX.
[n] J. Billan et al., “Performance of Prototypes and Start Up of Series Fabrication of the LHC Arc Quadrupoles”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH086, pp. 3430-3432.
[n] I. Lobach et al., “Study of Fluctuations in Undulator Radiation in the IOTA Ring at Fermilab”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 777-780. doi:10.18429/JACoW-IPAC2019-MOPRB088
[n] V. Bharadwaj, J. Crawford, and R. Mau, “Fermilab Collider Run 1B Statistics”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAP04, pp. 443-445.
[n] M. P. Kelly, Z. A. Conway, M. Kedzie, S. V. Kutsaev, J. L. Crisp, and L. L. Harle, “Compact 4 kW Variable RF Power Coupler for FRIB Quarter-wave Cavities”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB093, pp. 678-680.
[n] F. Schmidt-F?Âhre, A. Brenger, G. Kube, Ru. Neumann, and K. Wittenburg, “BPM System Upgrades in the PETRA III Pre-Accelerator Chain during the 2008 Shutdown”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper MOPD20, pp. 92-94.
[n] E. Roussel et al., “Electro-Optical Measurements of the Longitudinal Bunch Profile in the Near-Field on a Turn-by-Turn Basis at the Anka Storage Ring”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 33-37. doi:10.18429/JACoW-IBIC2015-MOPB006
[n] H. Wang et al., “Magnetron R&D Progress for High Efficiency CW RF Sources of Industrial Accelerators”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 597-600. doi:10.18429/JACoW-NAPAC2022-WEZD3
[n] A. G. Ruggiero, “Upgrade of BNL Accelerator Facility”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper MOBP03, pp. 29-33.
[n] E. Allaria, G. De Ninno, G. Penco, and C. Spezzani, “Requirements for FEL Commissioning at FERMI”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPE018, pp. 2176-2178.
[n] R. Broucquart and N. Hubert, “Fast Orbit Feedback Upgrade at SOLEIL”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 339-342. doi:10.18429/JACoW-IBIC2022-TUP42
[n] W. P. Lysenko, “Moment Methods for Simulation and Design”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU419, pp. 355-357.
[n] M. P. Kelly et al., “Superconducting 72 MHz =0.077 Quarter-wave Cavity for ATLAS”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP046, pp. 892-894.
[n] F. Liu, J. Hu, X. S. Jiang, Q. Ye, and G. H. Gong, “Design of Fast Machine Protection System for the C-ADS Injection I”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 393-396. doi:10.18429/JACoW-ICALEPCS2015-MOPGF134
[n] Y. Iwashita, H. Tongu, H. Hayano, T. Saeki, and K. Watanabe, “Updates on R&D of Nondestructive Inspection Systems for SRF Cavities”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO032, pp. 447-449.
[n] P. Dhakal, G. Ciovati, and G. R. Myneni, “A Path to Higher Q0 with Large Grain Niobium Cavities”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC091, pp. 2426-2428.
[n] D. Xiang, “Recent Advances and New Techniques in Visualization of Ultra-short Relativistic Electron Bunches”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEXB01, pp. 2091-2095.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Schwartz, R. P. Johnson, S. A. Kahn, and M. Kuchnir, “Multi-purpose Fiber Optic Sensors for HTS Magnets”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPD023, pp. 2458-2460.
- G. Vanbavinckhove et al., “Geometry and Optics of the Electrostatic ELENA Transfer Lines”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWO051, pp. 1985-1987.
- K. Yoshii, K. Nakamura, M. Uesaka, T. Watanabe, and T. Ueda, “DIAGNOSTICS OF SUB-PICOSECOND ELECTRON PULSE BY THE FLUCTUATION METHOD”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper TUP043, pp. XX-XX.
- R. D. Kephart, “SRF Cavity Research for Project X”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper THO3B03, pp. 541-545.
- M. Capstick, C. Rossi, and S. Doebert, “Design, testing, and validating the CLIC module pre-alignment and alignment systems”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL101, pp. 800-802.
- J. Mammosser and J. F. Benesch, “Mechanical Results of the CEBAF Cavity Series Production”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 781-784.
- H. G. Blosser, M. Reiser, and M. M. Gordon, “Central - Region Studies for the MSU Cyclotron”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63E04, pp. XX-XX.
- E. Plouviez et al., “Cleaning of Parasitic Bunches for Time Structured Filling of the ESRF Storage Ring During Top Up Operation”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1774-1777.
- C. Hovater et al., “Commissioning the JLab LERF Cryomodule Test Facility”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 973-977.
- P. Messmer et al., “Simulation-driven Optimization of Heavy-ion Production in ECR Sources”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FROBAB01, pp. 3786-3788.
- L. Martin, D. J. Kelliher, and S. L. Sheehy, “Can a Paul Ion Trap Be Used to Investigate Nonlinear Quasi-Integrable Optics?”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3251-3254.
- M. A. Baylac et al., “Operation Of The Versatile Accelerator Driving the Low Power ADS GUINEVERE at SCKCEN”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP100, pp. 659-661.
- M. Lindroos et al., “The ESS Accelerator”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper FRIOB06, pp. 994-998.
- S. Jin, J. Gao, T. Omori, and P. Sievers, “Numerical Analysis of Stresses for the Target of the ILC 300 Hz Conventional Positron Source”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3838-3840.
- G. de Rijk, “Normal-Conducting Separation and Compensation Dipoles for the LHC Experimental Insertions”, in Proc. 20th Russian Particle Accelerator Conf. on Charged Particle Accelerators (RuPAC'06), Novosibirsk, Russia, Sep. 2006, paper MOHP01, pp. XX-XX.
- J. Billan et al., “Performance of Prototypes and Start Up of Series Fabrication of the LHC Arc Quadrupoles”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH086, pp. 3430-3432.
- I. Lobach et al., “Study of Fluctuations in Undulator Radiation in the IOTA Ring at Fermilab”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 777-780.
- V. Bharadwaj, J. Crawford, and R. Mau, “Fermilab Collider Run 1B Statistics”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAP04, pp. 443-445.
- M. P. Kelly, Z. A. Conway, M. Kedzie, S. V. Kutsaev, J. L. Crisp, and L. L. Harle, “Compact 4 kW Variable RF Power Coupler for FRIB Quarter-wave Cavities”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPB093, pp. 678-680.
- F. Schmidt-F?Âhre, A. Brenger, G. Kube, Ru. Neumann, and K. Wittenburg, “BPM System Upgrades in the PETRA III Pre-Accelerator Chain during the 2008 Shutdown”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper MOPD20, pp. 92-94.
- E. Roussel et al., “Electro-Optical Measurements of the Longitudinal Bunch Profile in the Near-Field on a Turn-by-Turn Basis at the Anka Storage Ring”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 33-37.
- H. Wang et al., “Magnetron R&D Progress for High Efficiency CW RF Sources of Industrial Accelerators”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 597-600.
- A. G. Ruggiero, “Upgrade of BNL Accelerator Facility”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper MOBP03, pp. 29-33.
- E. Allaria, G. De Ninno, G. Penco, and C. Spezzani, “Requirements for FEL Commissioning at FERMI”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPE018, pp. 2176-2178.
- R. Broucquart and N. Hubert, “Fast Orbit Feedback Upgrade at SOLEIL”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 339-342.
- W. P. Lysenko, “Moment Methods for Simulation and Design”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU419, pp. 355-357.
- M. P. Kelly et al., “Superconducting 72 MHz =0.077 Quarter-wave Cavity for ATLAS”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP046, pp. 892-894.
- F. Liu, J. Hu, X. S. Jiang, Q. Ye, and G. H. Gong, “Design of Fast Machine Protection System for the C-ADS Injection I”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 393-396.
- Y. Iwashita, H. Tongu, H. Hayano, T. Saeki, and K. Watanabe, “Updates on R&D of Nondestructive Inspection Systems for SRF Cavities”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO032, pp. 447-449.
- P. Dhakal, G. Ciovati, and G. R. Myneni, “A Path to Higher Q0 with Large Grain Niobium Cavities”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC091, pp. 2426-2428.
- D. Xiang, “Recent Advances and New Techniques in Visualization of Ultra-short Relativistic Electron Bunches”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEXB01, pp. 2091-2095.
Back to search