Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. Zhang and P. E. Mueller, “An RFQ Injection System for the HRIBF”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB087, pp. 1004-1006.
[n] Y. Ma et al., “Microphonics Suppression Study in ARIEL e-Linac Cryomodules”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 136-140. doi:10.18429/JACoW-SRF2019-MOP036
[n] J. Haimson, B. Mecklenburg, and G. Stowell, “Initial Performance of a 500 kV, Chopper Prebuncher Injection System for a 17 GHz Linac”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH115, pp. 3948-3950.
[n] K. C. Harkay et al., “High-Charge Injector for on-Axis Injection Into A High-Performance Storage Ring Light Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3423-3426. doi:10.18429/JACoW-IPAC2019-THYYPLM3
[n] M. F. Qian, Y. Z. He, H. F. Wang, W. Zhang, and Q. G. Zhou, “Optimization of the Field Integrals of Two Small Gap IDs for CLS”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1133-1135. doi:10.18429/JACoW-IPAC2016-TUPMB012
[n] S. M. Kocimski et al., “An Electron Accelerator Based System for Assay of Transuranic Waste Barrels”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper THP0036, pp. 427-429.
[n] V. G. Mudrolyubov et al., “The CC1-3 Cyclotron System. Installation and Test Results”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 182-184. doi:10.18429/JACoW-RUPAC2016-TUCASH05
[n] C. Szwaj et al., “Single-Shot Electro-Optic Sampling Combined With Photonic Time-Stretch: Detailed Results at SOLEIL”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 795-797. doi:10.18429/JACoW-IPAC2015-MOPHA009
[n] G. Olry and B. Leluan, “Precise 3D Geometric Control of 700MHz SC Elliptical Cavities: RF Measurements vs. Theoretical Simulations”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PR024, pp. XX-XX.
[n] A. Chandra, G. Frankel, and M. Sumption, “Electropolishing of Niobium to Obtain Defect Free Surface”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO068, pp. 561-564.
For LaTeX
Use Complete Form
For BibTeX
References
- Y. Zhang and P. E. Mueller, “An RFQ Injection System for the HRIBF”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB087, pp. 1004-1006.
- Y. Ma et al., “Microphonics Suppression Study in ARIEL e-Linac Cryomodules”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 136-140.
- J. Haimson, B. Mecklenburg, and G. Stowell, “Initial Performance of a 500 kV, Chopper Prebuncher Injection System for a 17 GHz Linac”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH115, pp. 3948-3950.
- K. C. Harkay et al., “High-Charge Injector for on-Axis Injection Into A High-Performance Storage Ring Light Source”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3423-3426.
- M. F. Qian, Y. Z. He, H. F. Wang, W. Zhang, and Q. G. Zhou, “Optimization of the Field Integrals of Two Small Gap IDs for CLS”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1133-1135.
- S. M. Kocimski et al., “An Electron Accelerator Based System for Assay of Transuranic Waste Barrels”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper THP0036, pp. 427-429.
- V. G. Mudrolyubov et al., “The CC1-3 Cyclotron System. Installation and Test Results”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 182-184.
- C. Szwaj et al., “Single-Shot Electro-Optic Sampling Combined With Photonic Time-Stretch: Detailed Results at SOLEIL”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 795-797.
- G. Olry and B. Leluan, “Precise 3D Geometric Control of 700MHz SC Elliptical Cavities: RF Measurements vs. Theoretical Simulations”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PR024, pp. XX-XX.
- A. Chandra, G. Frankel, and M. Sumption, “Electropolishing of Niobium to Obtain Defect Free Surface”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO068, pp. 561-564.
Back to search