JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	A. Xiao et al., “The Intermediate-Energy X-ray (IEX) Undulator Commissioning Results”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPSM11, pp. 1070-1072. 
[n]	S. Eckhouse, E. Chu, and M. Montgomery, “Scaling Laws and Optimization of Electron Linear Induction Accelerators”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 911-914. 
[n]	S. Dewan, R. Holmes, K. Reiniger, F. V?Âlker, and J. Zeng, “High Power Switch-mode Power Converters for the 1.4 GeV PS-Booster Beam Transfer Lines at CERN”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THOAF102, pp. 333-335. 
[n]	Y. Hayashi et al., “TWT Amplifier using a Ferroelectric Cathode for Electron Beam Generation”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA90, pp. 3606-3608. 
[n]	Y. Lee, E.-S. Kim, G. Hahn, and Z. Li, “Design Study and Multi-particle Tracking Simulation of the IH-DTL with KONUS Beam Dynamics for KHIMA Project”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3299-3301. doi:10.18429/JACoW-IPAC2016-THPMB032
[n]	J. H. Kelly, “DMM Thermal Mechanical Design”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 152-155. doi:10.18429/JACoW-MEDSI2016-TUPE01
[n]	K. K. Pant, B. Biswas, S. Krishnagopal, and S. Chouksey, “Fabrication and RF Studies on A Prototype PWT Linac Structure”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU402, pp. 302-304. 
[n]	V. Variale et al., “First Test of the Charge State Breeder BRIC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB013, pp. 3318-3320. 
[n]	H. Pines and F. Selph, “Automatic Tuning of the LBL Bevalac Transfer Line”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2165-2168. 
[n]	J. Li, Y. Liu, X. Qi, and W. Q. Zhang, “Design of Digital Controller for Multi Module Series-parallel Accelerator Power Supply”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1288-1290. doi:10.18429/JACoW-IPAC2019-TUPMP023
[n]	L. Muguira et al., “Automatic Tuner Unit Design, Simulation and Measurement for Automatic Operation of the RF System in the ESS-Bilbao H+ Ion Source”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS023, pp. 3469-3471. 
[n]	M. Khojoyan et al., “Beam Dynamics Studies for Particle Driven Plasma Wakefield Acceleration Experiments at PITZ”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper THP08, pp. 236-238. 
[n]	A. H. Botha et al., “A New Multidisciplinary Separated-Sector Cyclotron Facility”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1118-1121. 
[n]	J.-L. Revol et al., “Highlights of Accelerator Activities in France on behalf of the Accelerator Division of the French Physics Society”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA048, pp. 181-183. 
[n]	R. Reimers, J. Haley, and G. Hampton, “184-Inch Synchrocyclotron Decommissioning”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1605-1608. 
[n]	A. G. Alekseev et al., “Basic Design Parameters of a Small Size Isochronous Cyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69F03, pp. XX-XX. 
[n]	J. Wang, I. A. Abid, R. T. Keane, and G. S. Sprau, “Preliminary Designs and Test Results of Bipolar Power Supplies for APS Upgrade Storage Ring”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2381-2383. doi:10.18429/JACoW-IPAC2018-WEPMF008
[n]	G. Chen et al., “Commissioning of RF System of the 200 MeV Proton Cyclotron”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2877-2879. doi:10.18429/JACoW-IPAC2019-WEPRB030
[n]	H. Meuth, “Longitudinal Synchrotron Beam-Pulse Shapes”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 741-744. 
[n]	M. Shirakata et al., “Slow Extraction Control Using the Digital Feedback System”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP1A03, pp. 1921-1923. 
[n]	A. S. Banerjee, “High Precision Power Supply for Accelerator Magnets”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper THBCH01, pp. 158-160. 
[n]	K. Cho, D. H. Han, Y. D. Oh, D. Son, and J. Lee, “A Test-bed of DCAF (DeCentralized Analysis Farm) in Korea”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP507, pp. XX-XX. 
[n]	Z. Zhang, F. S. Chen, and Y. F. Yang, “The Magnetic Measurement of Conventional Magnets for Free-Electron Laser Project of Chinese Academy of Engineering Physics”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1115-1117. doi:10.18429/JACoW-IPAC2016-TUPMB006
[n]	F. J. Haasbroek, P. Andersen, J. H. Langenhoven, F. M. Nortier, T. Rossouw, and T. N. Van der Walt, “Production of Radionuclides at the NAC Cyclotron Facility”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper K-08, pp. 559-562. 
[n]	S. Krishnagopal and S. A. Samant, “Effect of mirror-tilt on the mode-structure in an oscillator FEL”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC085, pp. 3092-3094. 
[n]	D. L. Johnson, K. B. Coachman, J. J. Ramirez, and R. W. Stinnett, “A Conceptual Design for an LMF Accelerator Module”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1017-1020. 
[n]	A. M. Porcellato et al., “Improved on line performance of the installed ALPI Nb sputtered QWRs”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper FR-03, pp. 203-207. 
[n]	N. F. Verster et al., “The Philips AVF Prototype Cyclotron”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63A07, pp. XX-XX. 
[n]	J. C. Sheppard et al., “Update to the NLC Injector System Design”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH068, pp. 3834-3836. 
[n]	F. Richard, J. Gueulette, J. P. Meulders, P. Pihet, S. Vynckier, and A. Wambersie, “Neutrontherapy with p(65) Neutrons at the UCL Cyclotron of Louvain-la-Neuve”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1818-1821. 
[n]	B. Visentin, J. P. Charrier, and G. Congretel, “Change of RF Superconductivity Parameters Induced by Heat Treatment on Niobium Cavities”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH122, pp. 1056-1058. 
[n]	L. L. Reginato and B. H. Smith, “A 600 - kV, 10-m A DC Cockcroft-Walton Rectifier Using Silicon Diodes at 100 kc”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 274-279. 
[n]	C.-S. Lin et al., “An Application of Multi-stage Adjustable Shock Absorbers for the Girders of Storage Ring in Taiwan Photon Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD045, pp. 2615-2617. 
[n]	X. Chang, N. Barov, D. J. Newsham, and D. Wu, “Test of an L-Band Energy-Efficiency Solid State RF Power Source”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPHO13, pp. 960-962. 
[n]	S. G. Azevedo et al., “Automated Experimental Data Analysis at the National Ignition Facility”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP011, pp. 429-431. 
[n]	H. S. Matis, P. Humphreys, A. Ratti, W. C. Turner, R. Miyamoto, and J. Stiller, “Simulations of the LHC High Luminosity Monitors at Beam Energies 3.5 TeV to 7.0 TeV”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP202, pp. 471-473. 
[n]	B. L. Bures et al., “X-ray Pole Figure Analysis on Fiber Textured Epitaxial Niobium Films for SRF Cavities”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO080, pp. 418-421. 
[n]	M. Krishnan et al., “Energetic Condensation Growth of MgB2 Thin-Films for SRF Applications”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO068, pp. 391-395. 
[n]	D. J. Scott et al., “Design and Characterisation of the Focusing Solenoidal System for the CLARA High Repetition Rate Electron Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4346-4348. doi:10.18429/JACoW-IPAC2017-THPIK107
[n]	X. He, J. Lei, and J. R. Zhang, “Development of a High-Power High-Directivity Directional Coupler and Four Power Dividers for S-Band”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2422-2424. doi:10.18429/JACoW-IPAC2018-WEPMF031
[n]	X. J. Nie et al., “Structure Design of a Multi-Wire Target”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 92-94. doi:10.18429/JACoW-MEDSI2018-TUPH27
[n]	S. Krishnagopal and S. A. Samant, “Mode-Stability in FEL Oscillators”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper TUPA05, pp. 219-221. 
[n]	W. Andreazza et al., “The Design, Construction and Operation of the Beam Instrumentation for the High Intensity and Energy Upgrade of ISOLDE at CERN”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 101-104. doi:10.18429/JACoW-IBIC2016-MOPG27
[n]	J. J. Pon, E. Klassen, K. S. Lee, M. M. Mouat, and P. J. Yogendran, “Preliminary Use of PDAs in TRIUMF's Central Control System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP509, pp. XX-XX. 
[n]	P. R. China, “Test Beam Line For Pulsed Beam Generation At CiaeÔÇÖs Crm Cyclotron”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 358-360. 
[n]	F. Lenkszus et al., “Timing and Synchronization for the APS Short Pulse X-ray Project”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUOAB01, pp. 1077-1079. 
[n]	B. T. Fishler et al., “Sustaining the National Ignition Facility (NIF) Integrated Computer Control System (ICCS) over its Thirty Year Lifespan”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1201-1205. doi:10.18429/JACoW-ICALEPCS2017-THCPL06
[n]	P. Chen, M. Lundquist, R. Yi, and D. Yu, “Synchronizable High Voltage Pulser with Laser-Photocathode Trigger”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUOBC01, pp. 862-864. 
[n]	M. Q. Barton, “Heavy Ion Collisions in a Collider at BNL”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2020-2022. 
[n]	J. J. Pon, K. S. Lee, M. Mouat, P. J. Yogendran, and B. Davison, “Overview of The Scans" in the Central Control System of TRIUMF's 500 MeV Cyclotron"”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC001, pp. 1090-1093. 
[n]	M. F. Vorogushin, Yu. N. Gavrish, A. V. Galchuk, L. I. Korolev, V. G. Mudrolyubov, and A. V. Stepanov, “APPLIED LOW-ENERGY CYCLOTRON”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper WENO17, pp. XX-XX. 
[n]	S. Albrand, J. L. Belmont, M. Fruneau, and A. Khallouf, “New Design for the Old Cyclotron of SARA”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper F-02, pp. 191-194. 
[n]	D. R. Edstrom et al., “50-MeV Run of the IOTA/FAST Electron Accelerator”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 326-329. doi:10.18429/JACoW-NAPAC2016-TUPOA19
[n]	J. L. Belmont and J. L. Pabot, “Study of Axial Injection for the Grenoble Cyclotron”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper C-009, pp. XX-XX. 
[n]	S. Roy Chaudhuri, A. S. Banerjee, P. Patwari, and L. Van den Heever, “Data Driven Simulation Framework”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 749-752. doi:10.18429/JACoW-ICALEPCS2015-WEPGF025
[n]	D. H. Rowlands et al., “Design and Simulation of a Cusp Gun for Gyro-amplifier Application in High Frequency RF Accelerators”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH156, pp. 1391-1393. 
[n]	K. Ohtomo and T. Katayama, “Design Study of Accumulator Cooler Ring for MUSES”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7W033, pp. 1072-1074. 
[n]	S. P. Kearney and D. Shu, “FE Model of a Nanopositioning Flexure Stage for Diagnosis of Trajectory Errors”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 179-183. doi:10.18429/JACoW-MEDSI2018-WEOAMA05

For LaTeX

Use Complete Form

For BibTeX

References

Back to search