Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. Hirlaender et al., “LEIR Injection Efficiency Studies as a Function of the Beam Energy Distribution from Linac3”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 758-760. doi:10.18429/JACoW-IPAC2018-TUPAF034
[n] D. Errede et al., “The Mucool Test Area Linac Experimental Facility at Fermilab”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB078, pp. 983-985.
[n] D. Sun, F. R. Huson, and W. W. MacKay, “Voltage Breakdown Test at 473 MHz”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO460, pp. 216-218.
[n] M. J. Barnes, F. Caspers, L. Ducimetiere, N. Garrel, and T. Kroyer, “An Improved Beam Screen for the LHC Injection Kickers”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN086, pp. 1574-1576.
[n] R. Ursic et al., “Beam Position Monitoring Using Intelligent Front-Ends and High Speed Interconnect Technologies”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WE614, pp. XX-XX.
[n] D. P. Brown and J. H. Sondericker, “Oxygen Deficiency Hazard Induced by Helium Release in Accelerator Tunnel”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2898-2901.
[n] F. Gerigk, M. Vretenar, and R. D. Ryne, “Design of the Superconducting Section of the SPL Linac at CERN”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH099, pp. 3909-3911.
[n] N. A. Huque, M. E. Abdelwhab, E. Daly, and Y. M. Pischalnikov, “Accelerated Life Testing of LCLS-II Cavity Tuner Motor”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB062, pp. 1257-1261.
[n] S. U. De Silva, A. Castilla, and J. R. Delayen, “Compact Superconducting RF-dipole Cavity Designs for Deflecting and Crabbing Applications”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO080, pp. 2483-2485.
[n] I. Jovanovic and R. Tikhoplav, “Cavity-recirculated Laser Charge Stripping of Hydrogen Ions”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS062, pp. 3568-3570.
[n] O. B. Malyshev et al., “Test Cavity and Cryostat for SRF Thin Film Evaluation”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3232-3234. doi:10.18429/JACoW-IPAC2015-WEPHA052
[n] R. B. Agustsson, G. Andonian, D. L. Griscom, A. Y. Murokh, and R. Tikhoplav, “A High Resolution Transverse Diagnostic based on Fiber Optics”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE093, pp. 1203-1205.
[n] L. R. Shen, D. K. Liu, and T. Wan, “Virtualization in Control System Environment”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU031, pp. 1138-1140.
[n] R. L. Gluckstern, R. K. Cooper, and R. Li, “Electric Polarizability and Magnetic Susceptibility of Small Holes in a Thin Screen”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 88-91.
[n] J. F. Tooker et al., “System Engineering in the SSC Linac”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-12, pp. 326-328.
[n] J.-P. Auclair, P.-A. Chamouard, and J.-L. Lemaire, “Linac Efficiency and Beam Qualities in p, d, 32He and 42He Acceleration”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S1-10, pp. 37-42.
[n] R. J. England et al., “Manufacture and Testing of Optical-scale Accelerator Structures from Silicon and Silica”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUYB02, pp. 1050-1053.
[n] M. Z. Zhang, B. C. Jiang, L. Ouyang, Q. L. Sun, and S. Q. Tian, “Study of a New Injection Scheme for the SSRF Storage Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP054, pp. 685-687.
[n] F. Zimmermann et al., “The Large Hadron-Electron Collider (LHeC) at the LHC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR1PBC05, pp. 4233-4235.
[n] G. F. Wells and J. W. Johnson, “Ion Source Modification for He- Ions”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 41-43.
[n] P. Orel, E. Janezic, P. L. Lemut, S. Zorzut, S. Hunziker, and V. Schlott, “Test Results of the Libera Sync 3 CW Reference Clock Transfer System”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1751-1753. doi:10.18429/JACoW-IPAC2014-TUPRI079
[n] Y. Iwata et al., “Design of Superconducting Rotating-gantry for Heavy-ion Therapy”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS074, pp. 3601-3603.
[n] W. X. Cheng et al., “Experimental Study of Single Bunch Instabilities at NSLS-II Storage Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1738-1740. doi:10.18429/JACoW-IPAC2016-TUPOR033
[n] C. Xu, M. J. Kelley, and C. E. Reece, “Analysis of High Field Non-Linear Losses on SRF Surfaces Due to Specific Topographic Roughness”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEEPPB011, pp. 2188-2190.
[n] A. Oppelt et al., “Facility Upgrade at PITZ and First Operation Results”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1518-1521. doi:10.18429/JACoW-IPAC2015-TUPWA046
[n] S. Guiducci et al., “Status Report on DAɸNE”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WOAB006, pp. 353-355.
[n] J. Campmany, J. Marcos, and V. Massana, “Performance of ID at ALBA”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC171, pp. 3299-3301.
[n] P. N. Prakash, A. Roy, and K. W. Shepard, “Quarter Wave Coaxial Line Cavity for New Delhi Linac Booster”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97C25, pp. 633-639.
[n] H. Fitze, M. Bopp, and H. Frei, “Development of a New High Power Cavity for the 590 MeV Ring Cyclotron at PSI”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP58, pp. 795-797.
[n] S. Posen, D. Gonnella, and M. Liepe, “Recent Progress in Nb3Sn SRF Cavity Development at Cornell”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2641-2644. doi:10.18429/JACoW-IPAC2014-WEPRI066
[n] S. Nagaitsev et al., “Commissioning of Fermilab's Electron Cooling System for 8-GeV Antiprotons”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper ROPC006, pp. 540-543.
[n] L. Tkachenko et al., “Dipole with Coil Based on High Temperature Superconductor”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH309, pp. 3624-3626.
[n] M. Migliorati et al., “The SPARC Project: A High Brightness Electron Beam Source at LNF to Drive a SASE-FEL Experiment”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB002, pp. 3285-3287.
[n] A. Blednykh et al., “NSLS-II Storage Ring BPM Button Development”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 748-750. doi:10.18429/JACoW-IPAC2015-MOPMN021
[n] P. Shcherbakov et al., “MAGNETIC PROPERTIES OF SILICON ELECTRICAL STEELS AND ITS APPLICATION IN FAST CYCLING SUPERCONDUCTING MAGNETS AT LOW TEMPERATURES”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THFP03, pp. XX-XX.
[n] R. Merl, F. Gallegos, C. Pillai, B. J. Sanchez, F. Shelley, and A. Steck, “A Multiwire Proportional Chamber System for Monitoring Low Momentum Beam in Accelerators”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB047, pp. 2515-2517.
[n] M. J. Borden, M. A. Plum, and I. Sugai, “Carbon Stripper Foils Used in the Los Alamos PSR”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P012, pp. 187-189.
[n] B. G. Chidley, J. C. Brown, G. E. McMichael, S. O. Schriber, M. R. Shubaly, and J. Ungrin, “Design and Constraints for the ZEBRA Injector, RFQ and DTL”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper B06, pp. 49-52.
[n] M. H. R. Donald et al., “Some Schemes for On-Line Correction of the Close Orbit, Dispersion and Beta Functions in PEP”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2207-2210.
[n] P. Shcherbakov et al., “MINIMIZATION OF CABLE LOSSES IN FAST-CYCLING DIPOLE FOR THE SIS300 RING”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THFP05, pp. XX-XX.
[n] D. Kim et al., “Analysis of Electron Beam Divergence in Diamond Field Emitter Array Cathodes”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2090-2093. doi:10.18429/JACoW-IPAC2019-TUPTS073
[n] S. Ghatak, A. S. Dhavale, and K. C. Mittal, “Multipacting Analysis of Superconducting RF Cavities using a Finite Element-based Code employing Leap Frog Method”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC011, pp. 2914-2916.
[n] A. S. Dhavale and K. C. Mittal, “Study of Multipacting in a Coaxial Coupler”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC012, pp. 2917-2919.
[n] J. B. Rechen, W. S. Gilbert, and W. V. Hassenzahl, “Sextupole Correction Coils for SSC Model Dipoles”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3731-3734.
[n] E. Crosbie, A. Gorka, E. Parker, C. Potts, and L. Ratner, “Injection and Acceleration of Protons in the Zero Gradient Synchrotron (ZGS) by Stripping H- Ions”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1056-1060.
[n] V. Zubko et al., “ENTHALPY MARGIN AND STABILITY OF FAST-CYCLING DIPOLE FOR”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THFP07, pp. XX-XX.
[n] T. I. Chen et al., “The Beam Lifetime Studies by Two Special Schemes”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP072L, pp. 1458-1462.
[n] P. Savage, J. K. Pozimski, A. Garbayo, A. P. Letchford, and D. S. Wilsher, “The Manufacture and Assembly of the FETS RFQ”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP053, pp. 3862-3864.
[n] Y. Xie, A. Kanareykin, N. Solyak, and V. P. Yakovlev, “Development of a Quarter-wave Coaxial Coupler for 1.3 GHz Superconducting Cavities”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2675-2677. doi:10.18429/JACoW-IPAC2014-WEPRI078
[n] Y. Xie et al., “Demonstration of Coaxial Coupling Scheme at 26 MV/m for 1.3 GHz TESLA-type SRF Cavities”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3594-3596. doi:10.18429/JACoW-IPAC2015-WEPWI046
[n] J. A. Clarke et al., “Superconducting Planar Undulator Development in the UK”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC178, pp. 3320-3322.
[n] N. Solyak et al., “Development of the Third Harmonic Cavity at Fermilab”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB014, pp. 1213-1215.
[n] G. X. Xia, B. C. Jiang, and L. G. Liu, “Simulation of the Fast Ion Instability in SSRF Storage Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD030, pp. 1991-1993.
For LaTeX
Use Complete Form
For BibTeX
References
- S. Hirlaender et al., “LEIR Injection Efficiency Studies as a Function of the Beam Energy Distribution from Linac3”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 758-760.
- D. Errede et al., “The Mucool Test Area Linac Experimental Facility at Fermilab”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB078, pp. 983-985.
- D. Sun, F. R. Huson, and W. W. MacKay, “Voltage Breakdown Test at 473 MHz”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO460, pp. 216-218.
- M. J. Barnes, F. Caspers, L. Ducimetiere, N. Garrel, and T. Kroyer, “An Improved Beam Screen for the LHC Injection Kickers”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAN086, pp. 1574-1576.
- R. Ursic et al., “Beam Position Monitoring Using Intelligent Front-Ends and High Speed Interconnect Technologies”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WE614, pp. XX-XX.
- D. P. Brown and J. H. Sondericker, “Oxygen Deficiency Hazard Induced by Helium Release in Accelerator Tunnel”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2898-2901.
- F. Gerigk, M. Vretenar, and R. D. Ryne, “Design of the Superconducting Section of the SPL Linac at CERN”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH099, pp. 3909-3911.
- N. A. Huque, M. E. Abdelwhab, E. Daly, and Y. M. Pischalnikov, “Accelerated Life Testing of LCLS-II Cavity Tuner Motor”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB062, pp. 1257-1261.
- S. U. De Silva, A. Castilla, and J. R. Delayen, “Compact Superconducting RF-dipole Cavity Designs for Deflecting and Crabbing Applications”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWO080, pp. 2483-2485.
- I. Jovanovic and R. Tikhoplav, “Cavity-recirculated Laser Charge Stripping of Hydrogen Ions”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS062, pp. 3568-3570.
- O. B. Malyshev et al., “Test Cavity and Cryostat for SRF Thin Film Evaluation”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3232-3234.
- R. B. Agustsson, G. Andonian, D. L. Griscom, A. Y. Murokh, and R. Tikhoplav, “A High Resolution Transverse Diagnostic based on Fiber Optics”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE093, pp. 1203-1205.
- L. R. Shen, D. K. Liu, and T. Wan, “Virtualization in Control System Environment”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMU031, pp. 1138-1140.
- R. L. Gluckstern, R. K. Cooper, and R. Li, “Electric Polarizability and Magnetic Susceptibility of Small Holes in a Thin Screen”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 88-91.
- J. F. Tooker et al., “System Engineering in the SSC Linac”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-12, pp. 326-328.
- J.-P. Auclair, P.-A. Chamouard, and J.-L. Lemaire, “Linac Efficiency and Beam Qualities in p, d, 32He and 42He Acceleration”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S1-10, pp. 37-42.
- R. J. England et al., “Manufacture and Testing of Optical-scale Accelerator Structures from Silicon and Silica”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUYB02, pp. 1050-1053.
- M. Z. Zhang, B. C. Jiang, L. Ouyang, Q. L. Sun, and S. Q. Tian, “Study of a New Injection Scheme for the SSRF Storage Ring”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPP054, pp. 685-687.
- F. Zimmermann et al., “The Large Hadron-Electron Collider (LHeC) at the LHC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR1PBC05, pp. 4233-4235.
- G. F. Wells and J. W. Johnson, “Ion Source Modification for He- Ions”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 41-43.
- P. Orel, E. Janezic, P. L. Lemut, S. Zorzut, S. Hunziker, and V. Schlott, “Test Results of the Libera Sync 3 CW Reference Clock Transfer System”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1751-1753.
- Y. Iwata et al., “Design of Superconducting Rotating-gantry for Heavy-ion Therapy”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS074, pp. 3601-3603.
- W. X. Cheng et al., “Experimental Study of Single Bunch Instabilities at NSLS-II Storage Ring”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1738-1740.
- C. Xu, M. J. Kelley, and C. E. Reece, “Analysis of High Field Non-Linear Losses on SRF Surfaces Due to Specific Topographic Roughness”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEEPPB011, pp. 2188-2190.
- A. Oppelt et al., “Facility Upgrade at PITZ and First Operation Results”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1518-1521.
- S. Guiducci et al., “Status Report on DAɸNE”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WOAB006, pp. 353-355.
- J. Campmany, J. Marcos, and V. Massana, “Performance of ID at ALBA”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC171, pp. 3299-3301.
- P. N. Prakash, A. Roy, and K. W. Shepard, “Quarter Wave Coaxial Line Cavity for New Delhi Linac Booster”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97C25, pp. 633-639.
- H. Fitze, M. Bopp, and H. Frei, “Development of a New High Power Cavity for the 590 MeV Ring Cyclotron at PSI”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP58, pp. 795-797.
- S. Posen, D. Gonnella, and M. Liepe, “Recent Progress in Nb3Sn SRF Cavity Development at Cornell”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2641-2644.
- S. Nagaitsev et al., “Commissioning of Fermilab's Electron Cooling System for 8-GeV Antiprotons”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper ROPC006, pp. 540-543.
- L. Tkachenko et al., “Dipole with Coil Based on High Temperature Superconductor”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH309, pp. 3624-3626.
- M. Migliorati et al., “The SPARC Project: A High Brightness Electron Beam Source at LNF to Drive a SASE-FEL Experiment”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAB002, pp. 3285-3287.
- A. Blednykh et al., “NSLS-II Storage Ring BPM Button Development”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 748-750.
- P. Shcherbakov et al., “MAGNETIC PROPERTIES OF SILICON ELECTRICAL STEELS AND ITS APPLICATION IN FAST CYCLING SUPERCONDUCTING MAGNETS AT LOW TEMPERATURES”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THFP03, pp. XX-XX.
- R. Merl, F. Gallegos, C. Pillai, B. J. Sanchez, F. Shelley, and A. Steck, “A Multiwire Proportional Chamber System for Monitoring Low Momentum Beam in Accelerators”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB047, pp. 2515-2517.
- M. J. Borden, M. A. Plum, and I. Sugai, “Carbon Stripper Foils Used in the Los Alamos PSR”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P012, pp. 187-189.
- B. G. Chidley, J. C. Brown, G. E. McMichael, S. O. Schriber, M. R. Shubaly, and J. Ungrin, “Design and Constraints for the ZEBRA Injector, RFQ and DTL”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper B06, pp. 49-52.
- M. H. R. Donald et al., “Some Schemes for On-Line Correction of the Close Orbit, Dispersion and Beta Functions in PEP”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2207-2210.
- P. Shcherbakov et al., “MINIMIZATION OF CABLE LOSSES IN FAST-CYCLING DIPOLE FOR THE SIS300 RING”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THFP05, pp. XX-XX.
- D. Kim et al., “Analysis of Electron Beam Divergence in Diamond Field Emitter Array Cathodes”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2090-2093.
- S. Ghatak, A. S. Dhavale, and K. C. Mittal, “Multipacting Analysis of Superconducting RF Cavities using a Finite Element-based Code employing Leap Frog Method”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEC011, pp. 2914-2916.
- A. S. Dhavale and K. C. Mittal, “Study of Multipacting in a Coaxial Coupler”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEC012, pp. 2917-2919.
- J. B. Rechen, W. S. Gilbert, and W. V. Hassenzahl, “Sextupole Correction Coils for SSC Model Dipoles”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3731-3734.
- E. Crosbie, A. Gorka, E. Parker, C. Potts, and L. Ratner, “Injection and Acceleration of Protons in the Zero Gradient Synchrotron (ZGS) by Stripping H- Ions”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1056-1060.
- V. Zubko et al., “ENTHALPY MARGIN AND STABILITY OF FAST-CYCLING DIPOLE FOR”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THFP07, pp. XX-XX.
- T. I. Chen et al., “The Beam Lifetime Studies by Two Special Schemes”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP072L, pp. 1458-1462.
- P. Savage, J. K. Pozimski, A. Garbayo, A. P. Letchford, and D. S. Wilsher, “The Manufacture and Assembly of the FETS RFQ”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPP053, pp. 3862-3864.
- Y. Xie, A. Kanareykin, N. Solyak, and V. P. Yakovlev, “Development of a Quarter-wave Coaxial Coupler for 1.3 GHz Superconducting Cavities”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2675-2677.
- Y. Xie et al., “Demonstration of Coaxial Coupling Scheme at 26 MV/m for 1.3 GHz TESLA-type SRF Cavities”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3594-3596.
- J. A. Clarke et al., “Superconducting Planar Undulator Development in the UK”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC178, pp. 3320-3322.
- N. Solyak et al., “Development of the Third Harmonic Cavity at Fermilab”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB014, pp. 1213-1215.
- G. X. Xia, B. C. Jiang, and L. G. Liu, “Simulation of the Fast Ion Instability in SSRF Storage Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPD030, pp. 1991-1993.
Back to search