Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] P. V. Bogdanov et al., “Experience of the MGC-20 Operation and its Prospects”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper J-04, pp. 673-676.
[n] W. D. Klotz, “Controlling the ESRF Accelerators”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 321-324.
[n] J. Feikes, K. Holldack, F. Senf, and T. Zeschke, “Impact of Ground and Structure Vibrations on the Source Stability of BESSY”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP3A03, pp. 622-624.
[n] D. Mancini, P. Schipani, O. Caputi, G. Mancini, and M. Brescia, “Integration of the VIMOS Control System”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUBT003, pp. XX-XX.
[n] N. G. Reshetnyak, N. Aizatsky, A. Dovbnya, N. A. Dovbnya, V. V. Mytrochenko, and V. Zakutin, “Characteristics of Electron Beam Produced by Magnetron Diode with a Secondary-Emission Cathode”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPE052, pp. 3197-3199.
[n] J. Bahrdt, “Tracking of Wavefronts”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper FROB003, pp. XX-XX.
[n] M. B. Ripert, A. Buechel, C. Dorn, A. Peters, J. Schreiner, and T. W. Winkelmann, “A Low Energy Ion Beam Pepper Pot Emittance Device”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM060, pp. 297-301.
[n] S. Y. Noh, S. D. Chang, J. G. Hwang, G. Hahn, and T. K. Yang, “The Development of Scintillating Screen Detector for Beam Monitoring at the KHIMA Project”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 244-247. doi:10.18429/JACoW-IPAC2016-MOPMR010
[n] S. Casalbuoni et al., “Performance of a Full Scale Superconducting Undulator with 20 mm Period Length at the KIT Synchrotron”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4223-4225. doi:10.18429/JACoW-IPAC2018-THPMF066
[n] M. S. Champion et al., “Plans for an Integrated Front-End Test Stand at the Spallation Neutron Source”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB044, pp. 954-956.
[n] Q. Fu et al., “Progress Work on a CW Deuteron RFQ with Magnetic Coupling Windows”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1123-1125. doi:10.18429/JACoW-IPAC2018-TUPAL050
[n] L. Thorndahl, D. Barker, C. Dimopoulou, and C. Peschke, “Design of the Palmer Pickup for Stochastic Pre-cooling of Heavy Ions at the CR”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper WEPPO21, pp. 149-151.
[n] J. Bae, L. Cultrera, P. Digiacomo, and I. V. Bazarov, “Long Lifetime Spin-Polarized GaAs Photocathode Activated by Cs2Te”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1589-1592. doi:10.18429/JACoW-IPAC2018-TUPML025
[n] S. Wang and J. Deng, “Acceleration Module in Linear Induction Accelerator”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD073, pp. 4449-4451.
[n] B. N. Kosciuk, C. Hetzel, J. A. Kierstead, V. Ravindranath, S. K. Sharma, and O. Singh, “Development and Testing of Carbon Fiber Vacuum Chamber Supports for NSLS-II”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP286, pp. 1364-1366.
[n] W. Chen, X. Feng, H. H. Lu, C. Shi, Y. Yang, and J. C. Zhang, “Development of Insertion Devices Measurement System at IHEP”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper WEPA22, pp. 381-384.
[n] Y. W. Kang, R. L. Kustom, P. Matthews, and A. Nassiri, “Fabrication and Measurement of a 10x Scale Model of a Double-sided Planar mm-wave Linac Cavity Stucture”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1297-1300.
[n] A. Halavanau et al., “Transverse-to-Longitudinal Photocathode Distribution Imaging”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3361-3363. doi:10.18429/JACoW-IPAC2018-THPAK060
[n] B. Song et al., “Advances in beam physics and technology for ultrafast electron diffraction”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper MOYN02, unpublished.
[n] A. Buechner, H. Buettig, R. Schurig, G. Staats, and A. Winter, “Results of ELBE Window and Coupler Tests with a Resonant Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPD024, pp. 1479-1481.
[n] X. M. Yu, Y. W. Chen, X. H. Wang, and M. S. Liu, “Operation Status of the Beijing Electron-Positron Collider”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP10003, pp. XX-XX.
[n] A. Gotz et al., “TANGO V8 - Another Turbo Charged Major Release”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUCOCB10, pp. 978-981.
[n] G. Liu et al., “The Upgrade of HLS Linac Control System”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPE014, pp. 2357-2359.
[n] D. Mancini et al., “Active Optics Control of the VST Telescope with the CAN Field-Bus”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP057, pp. XX-XX.
[n] A. Halavanau and P. Piot, “Electron Beam Pattern Rotation as a Method of Tunable Bunch Train Generation”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3372-3375. doi:10.18429/JACoW-IPAC2018-THPAK063
[n] A. V. Zlobin et al., “Modeling the High-Field Section of a Muon Helical Cooling Channel”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB054, pp. 391-393.
[n] S. A. Pande, R. Bartolini, R. T. Fielder, and M. Jensen, “Impedance Estimation of Diamond Cavities”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP058, pp. 1673-1675.
[n] S. Tomin, W. Decking, N. Golubeva, A. I. Novokshonov, T. Wohlenberg, and I. Zagorodnov, “Longitudinal Phase Space Diagnostics with Corrugated Structure at the European XFEL”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 275-278. doi:10.18429/JACoW-IPAC2022-MOPOPT020
[n] H. Nishimura, S. James, K. Muriki, Y. Qin, K. Song, and C. Sun, “GPU Computing for Particle Tracking”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP150, pp. 1764-1766.
[n] J. F. Chen et al., “Status of the Vertical Testing of the XFEL Third Harmonic Cavity Series”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2508-2511. doi:10.18429/JACoW-IPAC2014-WEPRI016
[n] L. Cooley et al., “Analyses of Defects in the Heat Affected Zone of Welded Niobium Coupons”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP057, pp. 956-956.
[n] P. Schipani, M. Brescia, D. Mancini, L. Marty, and G. Spirito, “The VST Telescope Control Software in the ESO VLT Environment”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP051, pp. XX-XX.
[n] N. Tokuda et al., “RFQ Linac for the Numatron Project”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3510-3513.
[n] N. Vitoratou and L. Bobb, “Overview of the pinhole camera design for the Diamond-II upgrade”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 369-373. doi:10.18429/JACoW-IBIC2025-TUPCO10
[n] R. Keller, R. Gough, R. Thomae, K. Leung, J. Greer, and P. Bach, “Measurements on the H- Ion Source and Low Energy Beam Transport Section for the SNS Front-End Systems”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOD09, pp. 223-225.
[n] S. S. Chuchurka, A. I. Benediktovitch, S. N. Galyamin, V. V. Vorobev, and A. Halavanau, “Theoretical Modeling of Electromagnetic Field from Electron Bunches in Periodic Wire Medium”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3376-3378. doi:10.18429/JACoW-IPAC2018-THPAK064
[n] J. S. Schmidt et al., “Functional Integration of the RFQ in the ESS Systems”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 890-893. doi:10.18429/JACoW-IPAC2018-TUPAF068
[n] A. Macridin, J. F. Amundson, P. Spentzouris, D. O. McCarron, and L. K. Spentzouris, “The Effect of Space-charge and Wake Fields in the Fermilab Booster”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP147, pp. 1758-1760.
[n] N. Wang, Z. Duan, X. Y. Li, H. Shi, S. K. Tian, and G. Xu, “Development of the Impedance Model in HEPS”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3110-3113. doi:10.18429/JACoW-IPAC2017-WEPIK078
[n] P. Lotrus and G. A. Durand, “Saclay GBAR Command Control”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC040, pp. 650-653.
[n] M. Jensen et al., “First 18 Months Operation of the Diamond Storage Ring RF System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC025, pp. 2037-2039.
[n] Y. Wang et al., “Deposition of Titanium-Zirconium-Vanadium Films by DC Magnetron Sputtering”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP024, pp. 404-406.
[n] L. H. Yu, “Design Parameters of the High Gain Harmonic Generation Experiment using Cornell Undulator at the ATF”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP92, pp. 2474-2476.
[n] W. D. Rush and J. Shi, “Two-Dimensional Calculation of Channeling Radiation Spectrum for High-Brightness Hard X-Ray Production”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1888-1890. doi:10.18429/JACoW-IPAC2015-TUPMA023
[n] R. J. England et al., “A High Transformer Ratio Plasma Wakefield Accelerator Scheme for FACET”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP088, pp. 265-267.
[n] J. Rochford et al., “The Development of a Superconducting Undulator for the ILC Positron Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE2RAI01, pp. 1839-1843.
[n] P. Rauer, I. Bahns, W. Decking, W. Hillert, J. Ro?ƒbach, and H. Sinn, “Integration of an XFELO at the European XFEL Facility”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 62-65. doi:10.18429/JACoW-FEL2019-TUP009
[n] A. Xiao et al., “The Intermediate-Energy X-ray (IEX) Undulator Commissioning Results”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPSM11, pp. 1070-1072.
[n] W. Lu et al., “Designing LWFA in the Blowout Regime”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS023, pp. 3050-3051.
[n] J. Molson et al., “A Comparison of Interaction Physics for Proton Collimation Systems in Current Simulation Tools”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2478-2481. doi:10.18429/JACoW-IPAC2017-WEOBA1
[n] C. Arcambal et al., “Status of the Power Couplers for the ESS Elliptical Cavity Prototypes”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB078, pp. 1309-1312.
[n] M. L. Neubauer, A. Dudas, S. A. Kahn, R. A. Rimmer, and H. Wang, “Magnetron Design for Amplitude Modulation”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4389-4391. doi:10.18429/JACoW-IPAC2017-THPIK123
[n] S. A. Kahn, A. Dudas, R. P. Johnson, M. L. Neubauer, R. A. Rimmer, and H. Wang, “Eddy Current Analysis for a 1.495 GHz Injection-Locked Magnetron”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4383-4385. doi:10.18429/JACoW-IPAC2017-THPIK121
[n] D. Beauregard and J. Stampe, “Canadian Light Source developments of the ALBA/CLS DLLRF system”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3439-3441. doi:10.18429/JACoW-IPAC2024-THPG70
[n] R. Stassen, F. J. Etzkorn, R. Maier, D. Prasuhn, H. Stockhorst, and L. Thorndahl, “COSY as Ideal Test Facility for HESR RF and Stochastic Cooling Hardware”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP022, pp. 861-863.
[n] R. L. Kustom, “Invited Paper: High Current, Low Energy Synchrotrons and Compressor Rings”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper K03, pp. 511-518.
[n] D. Wang, T. Zhang, Z. T. Zhao, and X. M. Yang, “Conceptual Design of a High Brightness and Fully Coherent Free Electron Laser in VUV Regime”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper TUPB21, pp. 302-303.
[n] P. Chu et al., “SNS Application Programming Infrastructure and Physics Applications”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_076.
[n] S. Wilkes et al., “Isolating the light of a single bunch: determining the viability of operating vertical-plane Pulse Picking by Resonant Excitation at Diamond-II to serve timing mode users”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 308-314. doi:10.18429/JACoW-IBIC2025-TUBC01
[n] P. Gu et al., “Reliability Improvements of the Diamond Superconducting Cavities”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO068, pp. 267-270.
[n] S. James et al., “Accelerator Simulation - Beyond High Performance Computing”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC086, pp. 340-342.
[n] E. R. Rotela, A. Baricikowski, J. Biggs, and S. Sharma, “Mechanical Design of a Flexible Bunch Compressor for APS Linac”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH167, pp. 4041-4043.
[n] G. M. Kazakevich, R. P. Johnson, M. L. Neubauer, V. A. Lebedev, W. Schappert, and V. P. Yakovlev, “Methods of Phase and Power Control in Magnetron Transmitters for Superconducting Accelerators”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4386-4388. doi:10.18429/JACoW-IPAC2017-THPIK122
[n] L. J. Jenner et al., “A Study of Mechanical and Magnetic Issues for a Prototype Positron Source Target”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP072, pp. 715-717.
[n] R. Bartolini et al., “Analysis of Collective Effects at the Diamond Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP020, pp. 1574-1576.
[n] P. D. Quinn, J. N. Corlett, M. W. Poole, and S. L. Thomson, “Beam Position Stability in the SRS”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 134-137.
[n] M. Veronese, S. Di Mitri, and M. Ferianis, “Coherent Radiation Studies For The FERMI@Elettra Relative Bunch Length Diagnostics”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPC06, pp. 156-158.
[n] N. Golubeva, V. Balandin, and W. Decking, “Optimal Twiss Parameters for Emittance Measurement in Periodic Transport Channels”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO010, pp. 1898-1900.
[n] M. Krishnan et al., “Energetic Condensation Growth of MgB2 Thin-Films for SRF Applications”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO068, pp. 391-395.
[n] K. J. Beczek, J. W. Lewellen, A. Nassiri, and E. Tanabe, “A Rationalized Approach to Thermionic RF Gun Design”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH052, pp. 2206-2208.
[n] S. Sakanaka et al., “Construction and Commissioning of Compact-ERL Injector at KEK”, in Proc. ERL'13, Novosibirsk, Russia, Sep. 2013, paper WG102, pp. 16-21.
[n] J. S. Diamond, A. Ibrahim, N. Liu, E. S. M. McCrory, and A. Semenov, “A VME and FPGA Based Data Acquisition System for Intensity Monitors”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 317-319. doi:10.18429/JACoW-NAPAC2016-TUPOA16
[n] X. D. Tu et al., “Beam Instability Induced by RF System of an FEL-THZ Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4298-4300. doi:10.18429/JACoW-IPAC2019-THPTS077
[n] D. J. Nicklaus et al., “An Erlang-Based Front End Framework for Accelerator Controls”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper THDAUST02, pp. 1264-1266.
[n] M. F. Vorogushin, Yu. N. Gavrish, A. V. Galchuk, L. I. Korolev, V. G. Mudrolyubov, and A. V. Stepanov, “APPLIED LOW-ENERGY CYCLOTRON”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper WENO17, pp. XX-XX.
[n] F. R. Osswald, E. Bouquerel, D. Boutin, W. Beeckman, and J. L. Lancelot, “Optimization of Quadripolar Field Production for Electrostatic Ion Beam Focusing”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2468-2470. doi:10.18429/JACoW-IPAC2014-WEPME080
[n] A. Morgan, A. Amiri, I. Martin, L. Bobb, and V. Zhiltsov, “Design and Prototyping for Diamond-II Stripline Kickers”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 334-338. doi:10.18429/JACoW-IBIC2025-TUPCO01
[n] Y. G??mez Mart?¡nez et al., “Power Couplers for Spiral-2”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper FRIOA04, pp. 947-950.
[n] W. D. Klotz and C. Herve, “The Conceptual Design of the ESRF Control System”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1196-1199.
[n] Y. Wang, M. Fedurin, P. Jines, T. Miller, and T. Zhao, “Upgrades of Linac System at CAMD”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB076, pp. 2892-2894.
[n] J. Rahighi et al., “Progress Status of the Iranian Light Source Facility Laboratory”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 240-242. doi:10.18429/JACoW-IPAC2014-MOPRO069
[n] N. Golubeva, V. Balandin, and W. Decking, “Optics for the Beam Switchyard at the European XFEL”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC008, pp. 2016-2018.
[n] K. E. Smirnov et al., “Cyclotron System C-250”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 105-107. doi:10.18429/JACoW-RuPAC2021-FRA05
[n] S. L. Leloir, T. A. Andre, C. Jamet, G. Ledu, S. Loret, and C. Potier de courcy, “Measurement Uncertainty Assessments of the SPIRAL2 ACCT/DCCT”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 712-714. doi:10.18429/JACoW-IBIC2016-WEPG39
[n] D. L. Hall et al., “Surface Analysis of Features Seen on Nb3Sn Sample Coupons Grown by Vapour Diffusion”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1130-1133. doi:10.18429/JACoW-IPAC2017-MOPVA119
[n] A. Passner and R. C. Catura, “Design of a Transport System for High Intensity Beams”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 912-917.
[n] Y. Lu, G. Feng, T. Hu, J. Jiang, X. D. Tu, and Y. Q. Xiong, “Design of a Fully Automated Test Bench for Measuring the Field Distribution in Standing Wave Cavity”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 246-249. doi:10.18429/JACoW-LINAC2018-MOPO119
[n] M. Sawabe, H. Hayano, A. Komiya, H. Monjushiro, T. Saeki, and M. Satou, “Long-Term Monitoring of 3rd-period EP-electrolyte in STF-EP Facility at KEK”, in Proc. ERL'11, Tsukuba, Japan, Oct. 2011, paper WG3016, pp. 97-101.
[n] J. Bahrdt and S. Sasaki, “Challenges of Quasiperiodic APPLE Undulators”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP064, pp. 705-707.
[n] K. T. Pan et al., “Insertion Devices Control Development at SRRC”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P035, pp. 3539-3541.
[n] H. Loos et al., “Electro-Optic Longitudinal Electron Beam Diagnostic at SDL”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB021, pp. 2455-2457.
[n] Y. Jiao et al., “Progress of Lattice Design and Physics Studies on the High Energy Photon Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1510-1513. doi:10.18429/JACoW-IPAC2019-TUPGW046
[n] H. C. Li et al., “Study on the LN2 Consumption of the Beamline Ln2 Transfer System for TPS Project”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3182-3184. doi:10.18429/JACoW-IPAC2015-WEPHA032
[n] J. Sikora, M. Billing, G. Codner, R. Meller, C. Strohman, and T. Pelaia, “Longitudinal Feedback at CESR”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA19, pp. 1115-1117.
For LaTeX
Use Complete Form
For BibTeX
References
- P. V. Bogdanov et al., “Experience of the MGC-20 Operation and its Prospects”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper J-04, pp. 673-676.
- W. D. Klotz, “Controlling the ESRF Accelerators”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 321-324.
- J. Feikes, K. Holldack, F. Senf, and T. Zeschke, “Impact of Ground and Structure Vibrations on the Source Stability of BESSY”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP3A03, pp. 622-624.
- D. Mancini, P. Schipani, O. Caputi, G. Mancini, and M. Brescia, “Integration of the VIMOS Control System”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUBT003, pp. XX-XX.
- N. G. Reshetnyak, N. Aizatsky, A. Dovbnya, N. A. Dovbnya, V. V. Mytrochenko, and V. Zakutin, “Characteristics of Electron Beam Produced by Magnetron Diode with a Secondary-Emission Cathode”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPE052, pp. 3197-3199.
- J. Bahrdt, “Tracking of Wavefronts”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper FROB003, pp. XX-XX.
- M. B. Ripert, A. Buechel, C. Dorn, A. Peters, J. Schreiner, and T. W. Winkelmann, “A Low Energy Ion Beam Pepper Pot Emittance Device”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM060, pp. 297-301.
- S. Y. Noh, S. D. Chang, J. G. Hwang, G. Hahn, and T. K. Yang, “The Development of Scintillating Screen Detector for Beam Monitoring at the KHIMA Project”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 244-247.
- S. Casalbuoni et al., “Performance of a Full Scale Superconducting Undulator with 20 mm Period Length at the KIT Synchrotron”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4223-4225.
- M. S. Champion et al., “Plans for an Integrated Front-End Test Stand at the Spallation Neutron Source”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB044, pp. 954-956.
- Q. Fu et al., “Progress Work on a CW Deuteron RFQ with Magnetic Coupling Windows”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1123-1125.
- L. Thorndahl, D. Barker, C. Dimopoulou, and C. Peschke, “Design of the Palmer Pickup for Stochastic Pre-cooling of Heavy Ions at the CR”, in Proc. 9th Workshop on Beam Cooling and Related Topics (COOL'13), Mürren, Switzerland, Jun. 2013, paper WEPPO21, pp. 149-151.
- J. Bae, L. Cultrera, P. Digiacomo, and I. V. Bazarov, “Long Lifetime Spin-Polarized GaAs Photocathode Activated by Cs2Te”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1589-1592.
- S. Wang and J. Deng, “Acceleration Module in Linear Induction Accelerator”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD073, pp. 4449-4451.
- B. N. Kosciuk, C. Hetzel, J. A. Kierstead, V. Ravindranath, S. K. Sharma, and O. Singh, “Development and Testing of Carbon Fiber Vacuum Chamber Supports for NSLS-II”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP286, pp. 1364-1366.
- W. Chen, X. Feng, H. H. Lu, C. Shi, Y. Yang, and J. C. Zhang, “Development of Insertion Devices Measurement System at IHEP”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper WEPA22, pp. 381-384.
- Y. W. Kang, R. L. Kustom, P. Matthews, and A. Nassiri, “Fabrication and Measurement of a 10x Scale Model of a Double-sided Planar mm-wave Linac Cavity Stucture”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1297-1300.
- A. Halavanau et al., “Transverse-to-Longitudinal Photocathode Distribution Imaging”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3361-3363.
- B. Song et al., “Advances in beam physics and technology for ultrafast electron diffraction”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper MOYN02, unpublished.
- A. Buechner, H. Buettig, R. Schurig, G. Staats, and A. Winter, “Results of ELBE Window and Coupler Tests with a Resonant Ring”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPD024, pp. 1479-1481.
- X. M. Yu, Y. W. Chen, X. H. Wang, and M. S. Liu, “Operation Status of the Beijing Electron-Positron Collider”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP10003, pp. XX-XX.
- A. Gotz et al., “TANGO V8 - Another Turbo Charged Major Release”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUCOCB10, pp. 978-981.
- G. Liu et al., “The Upgrade of HLS Linac Control System”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPE014, pp. 2357-2359.
- D. Mancini et al., “Active Optics Control of the VST Telescope with the CAN Field-Bus”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAP057, pp. XX-XX.
- A. Halavanau and P. Piot, “Electron Beam Pattern Rotation as a Method of Tunable Bunch Train Generation”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3372-3375.
- A. V. Zlobin et al., “Modeling the High-Field Section of a Muon Helical Cooling Channel”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB054, pp. 391-393.
- S. A. Pande, R. Bartolini, R. T. Fielder, and M. Jensen, “Impedance Estimation of Diamond Cavities”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP058, pp. 1673-1675.
- S. Tomin, W. Decking, N. Golubeva, A. I. Novokshonov, T. Wohlenberg, and I. Zagorodnov, “Longitudinal Phase Space Diagnostics with Corrugated Structure at the European XFEL”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 275-278.
- H. Nishimura, S. James, K. Muriki, Y. Qin, K. Song, and C. Sun, “GPU Computing for Particle Tracking”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP150, pp. 1764-1766.
- J. F. Chen et al., “Status of the Vertical Testing of the XFEL Third Harmonic Cavity Series”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2508-2511.
- L. Cooley et al., “Analyses of Defects in the Heat Affected Zone of Welded Niobium Coupons”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP057, pp. 956-956.
- P. Schipani, M. Brescia, D. Mancini, L. Marty, and G. Spirito, “The VST Telescope Control Software in the ESO VLT Environment”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAP051, pp. XX-XX.
- N. Tokuda et al., “RFQ Linac for the Numatron Project”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3510-3513.
- N. Vitoratou and L. Bobb, “Overview of the pinhole camera design for the Diamond-II upgrade”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 369-373.
- R. Keller, R. Gough, R. Thomae, K. Leung, J. Greer, and P. Bach, “Measurements on the H- Ion Source and Low Energy Beam Transport Section for the SNS Front-End Systems”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper MOD09, pp. 223-225.
- S. S. Chuchurka, A. I. Benediktovitch, S. N. Galyamin, V. V. Vorobev, and A. Halavanau, “Theoretical Modeling of Electromagnetic Field from Electron Bunches in Periodic Wire Medium”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3376-3378.
- J. S. Schmidt et al., “Functional Integration of the RFQ in the ESS Systems”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 890-893.
- A. Macridin, J. F. Amundson, P. Spentzouris, D. O. McCarron, and L. K. Spentzouris, “The Effect of Space-charge and Wake Fields in the Fermilab Booster”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP147, pp. 1758-1760.
- N. Wang, Z. Duan, X. Y. Li, H. Shi, S. K. Tian, and G. Xu, “Development of the Impedance Model in HEPS”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3110-3113.
- P. Lotrus and G. A. Durand, “Saclay GBAR Command Control”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC040, pp. 650-653.
- M. Jensen et al., “First 18 Months Operation of the Diamond Storage Ring RF System”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC025, pp. 2037-2039.
- Y. Wang et al., “Deposition of Titanium-Zirconium-Vanadium Films by DC Magnetron Sputtering”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6RFP024, pp. 404-406.
- L. H. Yu, “Design Parameters of the High Gain Harmonic Generation Experiment using Cornell Undulator at the ATF”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP92, pp. 2474-2476.
- W. D. Rush and J. Shi, “Two-Dimensional Calculation of Channeling Radiation Spectrum for High-Brightness Hard X-Ray Production”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1888-1890.
- R. J. England et al., “A High Transformer Ratio Plasma Wakefield Accelerator Scheme for FACET”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP088, pp. 265-267.
- J. Rochford et al., “The Development of a Superconducting Undulator for the ILC Positron Source”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE2RAI01, pp. 1839-1843.
- P. Rauer, I. Bahns, W. Decking, W. Hillert, J. Ro?ƒbach, and H. Sinn, “Integration of an XFELO at the European XFEL Facility”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 62-65.
- A. Xiao et al., “The Intermediate-Energy X-ray (IEX) Undulator Commissioning Results”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPSM11, pp. 1070-1072.
- W. Lu et al., “Designing LWFA in the Blowout Regime”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMS023, pp. 3050-3051.
- J. Molson et al., “A Comparison of Interaction Physics for Proton Collimation Systems in Current Simulation Tools”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2478-2481.
- C. Arcambal et al., “Status of the Power Couplers for the ESS Elliptical Cavity Prototypes”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB078, pp. 1309-1312.
- M. L. Neubauer, A. Dudas, S. A. Kahn, R. A. Rimmer, and H. Wang, “Magnetron Design for Amplitude Modulation”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4389-4391.
- S. A. Kahn, A. Dudas, R. P. Johnson, M. L. Neubauer, R. A. Rimmer, and H. Wang, “Eddy Current Analysis for a 1.495 GHz Injection-Locked Magnetron”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4383-4385.
- D. Beauregard and J. Stampe, “Canadian Light Source developments of the ALBA/CLS DLLRF system”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG70, pp. 3439-3441.
- R. Stassen, F. J. Etzkorn, R. Maier, D. Prasuhn, H. Stockhorst, and L. Thorndahl, “COSY as Ideal Test Facility for HESR RF and Stochastic Cooling Hardware”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP022, pp. 861-863.
- R. L. Kustom, “Invited Paper: High Current, Low Energy Synchrotrons and Compressor Rings”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper K03, pp. 511-518.
- D. Wang, T. Zhang, Z. T. Zhao, and X. M. Yang, “Conceptual Design of a High Brightness and Fully Coherent Free Electron Laser in VUV Regime”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper TUPB21, pp. 302-303.
- P. Chu et al., “SNS Application Programming Infrastructure and Physics Applications”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P3_076.
- S. Wilkes et al., “Isolating the light of a single bunch: determining the viability of operating vertical-plane Pulse Picking by Resonant Excitation at Diamond-II to serve timing mode users”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 308-314.
- P. Gu et al., “Reliability Improvements of the Diamond Superconducting Cavities”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper MOPO068, pp. 267-270.
- S. James et al., “Accelerator Simulation - Beyond High Performance Computing”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPC086, pp. 340-342.
- E. R. Rotela, A. Baricikowski, J. Biggs, and S. Sharma, “Mechanical Design of a Flexible Bunch Compressor for APS Linac”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH167, pp. 4041-4043.
- G. M. Kazakevich, R. P. Johnson, M. L. Neubauer, V. A. Lebedev, W. Schappert, and V. P. Yakovlev, “Methods of Phase and Power Control in Magnetron Transmitters for Superconducting Accelerators”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4386-4388.
- L. J. Jenner et al., “A Study of Mechanical and Magnetic Issues for a Prototype Positron Source Target”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP072, pp. 715-717.
- R. Bartolini et al., “Analysis of Collective Effects at the Diamond Storage Ring”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP020, pp. 1574-1576.
- P. D. Quinn, J. N. Corlett, M. W. Poole, and S. L. Thomson, “Beam Position Stability in the SRS”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 134-137.
- M. Veronese, S. Di Mitri, and M. Ferianis, “Coherent Radiation Studies For The FERMI@Elettra Relative Bunch Length Diagnostics”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper TUPC06, pp. 156-158.
- N. Golubeva, V. Balandin, and W. Decking, “Optimal Twiss Parameters for Emittance Measurement in Periodic Transport Channels”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWO010, pp. 1898-1900.
- M. Krishnan et al., “Energetic Condensation Growth of MgB2 Thin-Films for SRF Applications”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO068, pp. 391-395.
- K. J. Beczek, J. W. Lewellen, A. Nassiri, and E. Tanabe, “A Rationalized Approach to Thermionic RF Gun Design”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH052, pp. 2206-2208.
- S. Sakanaka et al., “Construction and Commissioning of Compact-ERL Injector at KEK”, in Proc. 53th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'13), Novosibirsk, Russia, Sep. 2013, paper WG102, pp. 16-21.
- J. S. Diamond, A. Ibrahim, N. Liu, E. S. M. McCrory, and A. Semenov, “A VME and FPGA Based Data Acquisition System for Intensity Monitors”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 317-319.
- X. D. Tu et al., “Beam Instability Induced by RF System of an FEL-THZ Source”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4298-4300.
- D. J. Nicklaus et al., “An Erlang-Based Front End Framework for Accelerator Controls”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper THDAUST02, pp. 1264-1266.
- M. F. Vorogushin, Yu. N. Gavrish, A. V. Galchuk, L. I. Korolev, V. G. Mudrolyubov, and A. V. Stepanov, “APPLIED LOW-ENERGY CYCLOTRON”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper WENO17, pp. XX-XX.
- F. R. Osswald, E. Bouquerel, D. Boutin, W. Beeckman, and J. L. Lancelot, “Optimization of Quadripolar Field Production for Electrostatic Ion Beam Focusing”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2468-2470.
- A. Morgan, A. Amiri, I. Martin, L. Bobb, and V. Zhiltsov, “Design and Prototyping for Diamond-II Stripline Kickers”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 334-338.
- Y. G??mez Mart?¡nez et al., “Power Couplers for Spiral-2”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper FRIOA04, pp. 947-950.
- W. D. Klotz and C. Herve, “The Conceptual Design of the ESRF Control System”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1196-1199.
- Y. Wang, M. Fedurin, P. Jines, T. Miller, and T. Zhao, “Upgrades of Linac System at CAMD”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB076, pp. 2892-2894.
- J. Rahighi et al., “Progress Status of the Iranian Light Source Facility Laboratory”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 240-242.
- N. Golubeva, V. Balandin, and W. Decking, “Optics for the Beam Switchyard at the European XFEL”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC008, pp. 2016-2018.
- K. E. Smirnov et al., “Cyclotron System C-250”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 105-107.
- S. L. Leloir, T. A. Andre, C. Jamet, G. Ledu, S. Loret, and C. Potier de courcy, “Measurement Uncertainty Assessments of the SPIRAL2 ACCT/DCCT”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 712-714.
- D. L. Hall et al., “Surface Analysis of Features Seen on Nb3Sn Sample Coupons Grown by Vapour Diffusion”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1130-1133.
- A. Passner and R. C. Catura, “Design of a Transport System for High Intensity Beams”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 912-917.
- Y. Lu, G. Feng, T. Hu, J. Jiang, X. D. Tu, and Y. Q. Xiong, “Design of a Fully Automated Test Bench for Measuring the Field Distribution in Standing Wave Cavity”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 246-249.
- M. Sawabe, H. Hayano, A. Komiya, H. Monjushiro, T. Saeki, and M. Satou, “Long-Term Monitoring of 3rd-period EP-electrolyte in STF-EP Facility at KEK”, in Proc. 50th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'11), Tsukuba, Japan, Oct. 2011, paper WG3016, pp. 97-101.
- J. Bahrdt and S. Sasaki, “Challenges of Quasiperiodic APPLE Undulators”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPP064, pp. 705-707.
- K. T. Pan et al., “Insertion Devices Control Development at SRRC”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P035, pp. 3539-3541.
- H. Loos et al., “Electro-Optic Longitudinal Electron Beam Diagnostic at SDL”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB021, pp. 2455-2457.
- Y. Jiao et al., “Progress of Lattice Design and Physics Studies on the High Energy Photon Source”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1510-1513.
- H. C. Li et al., “Study on the LN2 Consumption of the Beamline Ln2 Transfer System for TPS Project”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3182-3184.
- J. Sikora, M. Billing, G. Codner, R. Meller, C. Strohman, and T. Pelaia, “Longitudinal Feedback at CESR”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA19, pp. 1115-1117.
Back to search