Favourites
For Word
[n] V. Villamayor Callejo et al., “Control and acquisition system for a radar-based IFMIF-DONES lithium target diagnostic”, presented at the ICALEPCS'25, Chicago, IL, USA, Sep. 2025, paper THPD044, unpublished.
[n] M. L. Neubauer, A. Dudas, and F. Marhauser, “Using Conductive Nanoparticles to Reduce the Surface Charging of Ceramics”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4392-4394. doi:10.18429/JACoW-IPAC2017-THPIK124
[n] G. Renaud, G. Abeille, E. Elkaim, E. Fonda, F. Langlois, and J. Malik, “Continuous Scan at Synchrotron Soleil”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP054, pp. 507-509.
[n] Y. Jiao, M. Li, and X. Y. Li, “Brightness Dependence Investigation and Optimizaiton for the Heps”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1390-1393. doi:10.18429/JACoW-IPAC2018-TUPMF056
[n] Q. A. Kerns, G. H. Biallas, F. Turkot, R. C. Webber, and A. Wehmann, “An R.F. Device for Precision Location of the Beam Position Detectors in the Energy Saver”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2250-2253.
[n] Y. X. Zhang et al., “Coaxial Input Coupler Design For Wuhan Advanced Light Source”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPM070, unpublished.
[n] B. X. Yang, N. Arnold, W. Berg, E. R. Rotela, S. Sharma, and S. J. Stein, “Design and Performance of a Compact Imaging System for the APS Linac Bunch Compressor”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH107, pp. 2335-2337.
[n] D. M. Welsch, A. Lehrach, B. Lorentz, R. Maier, D. Prasuhn, and R. T?Âlle, “Investigation and Optimization of Transverse Non-linear Beam Dynamics in the High-energy Storage Ring HESR”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE063, pp. 4659-4661.
[n] Y. Jiao, X. Cui, X. Y. Huang, and G. Xu, “Suppression of the CSR-induced Emittance Growth in Achromats using Two-dimensional point-kick Analysis”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THC03, pp. 976-979.
[n] A. Guirao, D. Jimenez, L. M. Martinez Fresno, J. Molla, and I. Podadera, “Development of the New Electronic Instrumentation for the LIPAc/IFMIF Beam Position Monitors”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPC12, pp. 71-74.
[n] S. Di Mitri et al., “Emittance Control in the Presence of Collective Effects in the FERMI@Elettra Free Electron Laser Linac Driver”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper MOOCNO01, pp. 6-11.
[n] M. H. Lieng, R. Appleby, G. Corti, and V. Talanov, “Numerical Analysis of Machine Background in the LHCb Experiment for the Early and Nominal Operation of LHC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC001, pp. 450-452.
[n] C. Barthe-Dejean, F. Lutton, and M. Michel, “Seismic Analysis for Safety Requirements of SPIRAL2 Accelerator”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 252-254. doi:10.18429/JACoW-LINAC2022-MOPORI11
[n] J. W. Lewellen et al., “A Flexible Injector Test Stand Design”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB004, pp. 2038-2040.
[n] J. Chen et al., “A Novel Non-Linear Strip-Line Kicker Driven by Fast Pulser in Common Mode”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2345-2348. doi:10.18429/JACoW-IPAC2019-WEPMP018
[n] R. Zeng et al., “Design of the Phase Reference Distribution System at ESS”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP043, pp. 529-531.
[n] Y. Liao, W. Wang, X. Liu, Q. Chen, and B. Qin, “A large momentum acceptance gantry for light-weight proton therapy facility: its beam lattice, magnets design and clinical advantages”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3632-3634. doi:10.18429/JACoW-IPAC2024-THPR51
[n] A. Leduc et al., “Plasma Modelization and Study for the PHOENIX V3 ECR Ion Source”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 176-179. doi:10.18429/JACoW-ECRIS2018-WEB2
[n] F. Staufenbiel et al., “Test of the Photocathode Cooling System of the 312 Cell SRF Gun”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP23, pp. 284-286.
[n] Y. Bao et al., “Beamline Design of EMuS - the First Experimental Muon Source in China”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1574-1576. doi:10.18429/JACoW-IPAC2018-TUPML020
[n] S. Karstensen, M. E. Castro Carballo, J. M. J?ñger, and M. Staack, “XFEL Machine Protection System (MPS) Based on uTCA”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 82-85. doi:10.18429/JACoW-ICALEPCS2015-MOM308
[n] V. V. Kashikhin, V. Lombardo, and G. Velev, “Magnet Design Optimization for Future Hardon Colliders”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4307-4310. doi:10.18429/JACoW-IPAC2019-THPTS084
[n] H. Yuan, “Design and Optimization of a 2MeV X-Band Side Coupled Accelerating Structure”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4193-4195. doi:10.18429/JACoW-IPAC2017-THPIK043
[n] S. Sergey, S. Maslennikov, E. Shkolnikov, and A. Agafonov, “Dynamics of Plasma-Beam Formations in the Acceleration Gap of the Pulse Neutron Generator-based Vacuum Neutron Tube”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper THPSC52, pp. 447-449.
[n] F. Micolon and M. Sosin, “Design of a High-Precision Lifting System for the HL-LHC Heavy Components in the Interaction Region”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 255. doi:10.18429/JACoW-MEDSI2020-WEPA13
[n] V. Gostishchev, C. Dimopoulou, A. Dolinskii, F. Nolden, and M. Steck, “Internal Target Effects in the ESR Storage Ring with Cooling”, in Proc. COOL'07, Bad Kreuznach, Germany, Sep. 2007, paper THAP20, pp. 210-212.
[n] L. Giannessi et al., “The Fermi Seeded FEL Facility: Operational Experience and Future Perspectives”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 57-60. doi:10.18429/JACoW-FEL2015-MOP013
[n] E. Matias et al., “ScienceStudio: A Project Status Update”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP105, pp. 880-882.
[n] M. Znidarcic, E. Janezic, and K. Lang, “Beam Position Monitor for Circular Proton Accelerators”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 267-269. doi:10.18429/JACoW-IPAC2016-MOPMR018
[n] Q. Jin et al., “The Commission of a 2MeV X-Band SW Accelerating Guide”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D039, pp. 178-180.
[n] M. Lechartier, D. Besnier, J. F. Leyge, and M. Michel, “Design of the MEBT Rebunchers for the SPIRAL 2 Driver”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper C-09, pp. 278-281.
[n] I. V. Gribov, I. V. Shvedunov, and V. R. Yaliyan, “RaceTrack Microtron Control System”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH024, pp. 819-821.
[n] Y. Jiao, X. Y. Li, and G. Xu, “Performance Comparison of Different Ultralow Emittance Unit Cells”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1382-1385. doi:10.18429/JACoW-IPAC2018-TUPMF054
[n] E. Matias, “Friday Closeout Presentation”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper FRTA01, pp. 219-219.
[n] B. Song et al., “Time-of-flight control and passive compression in an Alpha-magnet beamline for MHz MeV UED”, presented at the IPAC'26, Deauville, France, May 2026, paper THP5662, unpublished.
[n] L. M. A. Ferreira, S. Calatroni, S. Forel, and J. A. Shirra, “Niobium Cavity Electropolishing Modelling and Optimisation”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP047, pp. 518-520.
[n] F. Yang, D. La Civita, H. Sinn, and M. Vannoni, “Heat Load Simulation of Optic Materials at European XFEL”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 357. doi:10.18429/JACoW-MEDSI2020-THOB02
[n] J. F. Zhang et al., “A Particle-in-Cell/Monte-Carlo-Collision Code for the Simulation of Stepwise Ionization of Lithium in 2.45 GHz ECR Ion Source”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 148-151. doi:10.18429/JACoW-ECRIS2018-TUP26
[n] A. Nassiri, T. Berenc, J. Foster, G. Waldschmidt, and J. Zhou, “A Photocathode RF Gun Design for a mm-Wave Linac-Based FEL”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPB06, pp. 961-963.
For LaTeX
Use Complete Form
For BibTeX
References
- V. Villamayor Callejo et al., “Control and acquisition system for a radar-based IFMIF-DONES lithium target diagnostic”, presented at the 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, paper THPD044, unpublished.
- M. L. Neubauer, A. Dudas, and F. Marhauser, “Using Conductive Nanoparticles to Reduce the Surface Charging of Ceramics”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4392-4394.
- G. Renaud, G. Abeille, E. Elkaim, E. Fonda, F. Langlois, and J. Malik, “Continuous Scan at Synchrotron Soleil”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP054, pp. 507-509.
- Y. Jiao, M. Li, and X. Y. Li, “Brightness Dependence Investigation and Optimizaiton for the Heps”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1390-1393.
- Q. A. Kerns, G. H. Biallas, F. Turkot, R. C. Webber, and A. Wehmann, “An R.F. Device for Precision Location of the Beam Position Detectors in the Energy Saver”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2250-2253.
- Y. X. Zhang et al., “Coaxial Input Coupler Design For Wuhan Advanced Light Source”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM070, unpublished.
- B. X. Yang, N. Arnold, W. Berg, E. R. Rotela, S. Sharma, and S. J. Stein, “Design and Performance of a Compact Imaging System for the APS Linac Bunch Compressor”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH107, pp. 2335-2337.
- D. M. Welsch, A. Lehrach, B. Lorentz, R. Maier, D. Prasuhn, and R. T?Âlle, “Investigation and Optimization of Transverse Non-linear Beam Dynamics in the High-energy Storage Ring HESR”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPE063, pp. 4659-4661.
- Y. Jiao, X. Cui, X. Y. Huang, and G. Xu, “Suppression of the CSR-induced Emittance Growth in Achromats using Two-dimensional point-kick Analysis”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THC03, pp. 976-979.
- A. Guirao, D. Jimenez, L. M. Martinez Fresno, J. Molla, and I. Podadera, “Development of the New Electronic Instrumentation for the LIPAc/IFMIF Beam Position Monitors”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPC12, pp. 71-74.
- S. Di Mitri et al., “Emittance Control in the Presence of Collective Effects in the FERMI@Elettra Free Electron Laser Linac Driver”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper MOOCNO01, pp. 6-11.
- M. H. Lieng, R. Appleby, G. Corti, and V. Talanov, “Numerical Analysis of Machine Background in the LHCb Experiment for the Early and Nominal Operation of LHC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEC001, pp. 450-452.
- C. Barthe-Dejean, F. Lutton, and M. Michel, “Seismic Analysis for Safety Requirements of SPIRAL2 Accelerator”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 252-254.
- J. W. Lewellen et al., “A Flexible Injector Test Stand Design”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB004, pp. 2038-2040.
- J. Chen et al., “A Novel Non-Linear Strip-Line Kicker Driven by Fast Pulser in Common Mode”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2345-2348.
- R. Zeng et al., “Design of the Phase Reference Distribution System at ESS”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP043, pp. 529-531.
- Y. Liao, W. Wang, X. Liu, Q. Chen, and B. Qin, “A large momentum acceptance gantry for light-weight proton therapy facility: its beam lattice, magnets design and clinical advantages”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR51, pp. 3632-3634.
- A. Leduc et al., “Plasma Modelization and Study for the PHOENIX V3 ECR Ion Source”, in Proc. 23th International Workshop on ECR Ion Sources (ECRIS'18), Catania, Italy, Sep. 2018, pp. 176-179.
- F. Staufenbiel et al., “Test of the Photocathode Cooling System of the 312 Cell SRF Gun”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP23, pp. 284-286.
- Y. Bao et al., “Beamline Design of EMuS - the First Experimental Muon Source in China”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1574-1576.
- S. Karstensen, M. E. Castro Carballo, J. M. J?ñger, and M. Staack, “XFEL Machine Protection System (MPS) Based on uTCA”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 82-85.
- V. V. Kashikhin, V. Lombardo, and G. Velev, “Magnet Design Optimization for Future Hardon Colliders”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4307-4310.
- H. Yuan, “Design and Optimization of a 2MeV X-Band Side Coupled Accelerating Structure”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4193-4195.
- S. Sergey, S. Maslennikov, E. Shkolnikov, and A. Agafonov, “Dynamics of Plasma-Beam Formations in the Acceleration Gap of the Pulse Neutron Generator-based Vacuum Neutron Tube”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper THPSC52, pp. 447-449.
- F. Micolon and M. Sosin, “Design of a High-Precision Lifting System for the HL-LHC Heavy Components in the Interaction Region”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 255.
- V. Gostishchev, C. Dimopoulou, A. Dolinskii, F. Nolden, and M. Steck, “Internal Target Effects in the ESR Storage Ring with Cooling”, in Proc. 6th Workshop on Beam Cooling and Related Topics (COOL'07), Bad Kreuznach, Germany, Sep. 2007, paper THAP20, pp. 210-212.
- L. Giannessi et al., “The Fermi Seeded FEL Facility: Operational Experience and Future Perspectives”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 57-60.
- E. Matias et al., “ScienceStudio: A Project Status Update”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP105, pp. 880-882.
- M. Znidarcic, E. Janezic, and K. Lang, “Beam Position Monitor for Circular Proton Accelerators”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 267-269.
- Q. Jin et al., “The Commission of a 2MeV X-Band SW Accelerating Guide”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D039, pp. 178-180.
- M. Lechartier, D. Besnier, J. F. Leyge, and M. Michel, “Design of the MEBT Rebunchers for the SPIRAL 2 Driver”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper C-09, pp. 278-281.
- I. V. Gribov, I. V. Shvedunov, and V. R. Yaliyan, “RaceTrack Microtron Control System”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH024, pp. 819-821.
- Y. Jiao, X. Y. Li, and G. Xu, “Performance Comparison of Different Ultralow Emittance Unit Cells”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1382-1385.
- E. Matias, “Friday Closeout Presentation”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper FRTA01, pp. 219-219.
- B. Song et al., “Time-of-flight control and passive compression in an Alpha-magnet beamline for MHz MeV UED”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP5662, this conference.
- L. M. A. Ferreira, S. Calatroni, S. Forel, and J. A. Shirra, “Niobium Cavity Electropolishing Modelling and Optimisation”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUP047, pp. 518-520.
- F. Yang, D. La Civita, H. Sinn, and M. Vannoni, “Heat Load Simulation of Optic Materials at European XFEL”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 357.
- J. F. Zhang et al., “A Particle-in-Cell/Monte-Carlo-Collision Code for the Simulation of Stepwise Ionization of Lithium in 2.45 GHz ECR Ion Source”, in Proc. 23th International Workshop on ECR Ion Sources (ECRIS'18), Catania, Italy, Sep. 2018, pp. 148-151.
- A. Nassiri, T. Berenc, J. Foster, G. Waldschmidt, and J. Zhou, “A Photocathode RF Gun Design for a mm-Wave Linac-Based FEL”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPB06, pp. 961-963.
Back to search