Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. Z. Zhang, Y. Z. Guo, and Z. X. Wang, “Alignment of the Mechanical Components and Machining Control of the Monolithic Vacuum Chamber for HIRFL”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I7-10, pp. 555-557.
[n] V. Mironov, J. P. M. Beijers, S. Brandenburg, H. R. Kremers, J. Mulder, and S. Saminathan, “ECR Ion Source Development at the AGOR Facility”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP053, pp. 156-158.
[n] M. Sanchez Barrueta, G. O. Bolme, J. T. M. Lyles, R. Z. Pinsky, and J. E. Zane, “X-Ray Detector Array for Spatial and Temporal Diagnostic at the LANSCE Linac”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 47-50. doi:10.18429/JACoW-NAPAC2019-MOYBB6
[n] D. C. Kiselev et al., “IMPACT: A Substantial Upgrade to the HIPA Infrastructure at PSI”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper MOBO02, pp. 34-37. doi:10.18429/JACoW-CYCLOTRONS2022-MOBO02
[n] M. Yadav, O. Apsimon, C. E. Hansel, J. B. Rosenzweig, and C. P. Welsch, “Ion Motion in Flat Beam Plasma Accelerators”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 521-523. doi:10.18429/JACoW-IPAC2021-MOPAB149
[n] S. Farina, J. H. Lee, J. P. S. Martins, and D. P. Piso, “MicroTCA Generic Data Acquisition Systems at ESS”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 118-124. doi:10.18429/JACoW-ICALEPCS2017-TUAPL01
[n] M. Y. Huang et al., “Study on the Important Technologies of 300MeV Upgrade for the CSNS Injection System”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3089-3092. doi:10.18429/JACoW-IPAC2021-WEPAB199
[n] P. Grand, “Vacuum Requirements for Linacs”, in Proc. LINAC'63, New Heaven, CT, USA, Oct. 1963, paper 13-01, pp. 421-430.
[n] F. M. Alrumayan, A. Algaith, A. M. Hendy, J. F. Schneider, SA. AL-Ghamdi, and H. A. Kassim, “Magnetic Field Measurement System of CS-30 Cyclotron”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 196-198. doi:10.18429/JACoW-Cyclotrons2016-TUP13
[n] H. Podlech et al., “Status of the Development of a Superconducting 352 MHz CH-Prototype Cavity”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP29, pp. 372-374.
[n] P. A. Thompson et al., “Status of the Quadrupoles for RHIC”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 503-506.
[n] M. Cavellier, “A New Process for Nitrogen Doping of Niobium Cavities”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 276. doi:10.18429/JACoW-SRF2021-MOPCAV009
[n] J. Willard, “A High Current Electron Gun Suitable for Use Down to 1 Nanosecond Pulse Length”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 87-93.
[n] R. W. Hamm and M. E. Hamm, “How to Create a Business out of Manufacturing Linacs”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEIFI01, pp. 1911-1915.
[n] K. Hiramoto and M. Nishi, “A Particle Tracking Method for Accelerators with Small Radius of Curvature”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 717-720.
[n] C. G. Li, J. H. Li, and S. Zheng, “The Electro-magnetic Field Simulation and Cavity Design of Ridgetron for High Power Electron Irradiation Accelerator”, in Proc. ICAP'15, Shanghai, China, Oct. 2015, pp. 58-60. doi:10.18429/JACoW-ICAP2015-TUDWC1
[n] K. Takayama et al., “A POP Experiment Scenario of Induction Synchrotron at the KEK 12GeV-PS”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB093, pp. 1807-1809.
[n] C. Birattari, M. Bonardi, F. Resmini, and A. Salomone, “Status Report on Radioisotope Production for Biomedical Purposes at Milan AVF Cyclotron”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper GP-02, pp. 693-695.
[n] P. Kolb, Y. Gao, C. Pai, R. Porqueddu, K. S. Smith, and W. Xu, “Dual-ridge Waveguide Load Design for eRHIC”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 177-179. doi:10.18429/JACoW-SRF2017-MOPB052
[n] J. T. Weir, J. K. Boyd, G. J. Caporaso, and T. J. Orzechowski, “Experimental Results of Beam Brightness Improvements at the Advanced Test Accelerator (ATA)”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 934-936.
[n] O. A. Schmidt et al., “Horizontal-Gap Vertically-Polarizing Undulator (HGVPU) Design Challenges and Resolutions”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 288-292. doi:10.18429/JACoW-MEDSI2016-WECA04
[n] P. Elleaume, “A New Approach to the Electron Beam Dynamics in Undulators and Wigglers”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 661-664.
[n] J. T. Maniscalco, T. Gruber, A. T. Holic, and M. Liepe, “Progress Towards Commissioning the Cornell DC Field Dependence Cavity”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 543-546. doi:10.18429/JACoW-SRF2019-TUP051
[n] N. A. Vinokurov et al., “Status of the Novosibirsk Terahertz FEL”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUCOS01, pp. XX-XX.
[n] R. E. Worsham, “Stability and Tolerance of the Separated Orbit Cyclotron”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 644-648.
[n] A. H. Lumpkin and B. X. Yang, “Commissioning Results of the APS Storage Ring Photon Monitor Systems”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEO04A, pp. 343-345.
[n] A. Vergara-Fern?índez, R. Denz, and F. Rodr?¡guez-Mateos, “Reliability Analysis for the Quench Detection in the LHC Machine”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE012, pp. 2445-2447.
[n] R. Panas et al., “The impact of insertion devices on Solaris storage ring optics”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPB052, unpublished.
[n] J. T. Maniscalco, T. Arias, D. Liarte, M. Liepe, J. P. Sethna, and N. Sitaraman, “Theoretical Analysis of Quasiparticle Overheating, Positive Q-Slope, and Vortex Losses in SRF Cavities”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3020-3023. doi:10.18429/JACoW-IPAC2019-WEPRB089
[n] S. A. Cherenshchikov, G. M. Ivanov, L. A. Makhnenko, and A. N. Opanasenko, “Secondary Emission Magnetron Injection Gun for Linac”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA38, pp. 1976-1978.
[n] S. Posen, M. Merio, A. Romanenko, and Y. Trenikhina, “Fermilab Nb3Sn R&D Program”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB048, pp. 678-680.
[n] V. Ivanov, “Computational Models forChannel Plate Simulations”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper THPSC021, pp. 300-303.
For LaTeX
Use Complete Form
For BibTeX
References
- G. Z. Zhang, Y. Z. Guo, and Z. X. Wang, “Alignment of the Mechanical Components and Machining Control of the Monolithic Vacuum Chamber for HIRFL”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I7-10, pp. 555-557.
- V. Mironov, J. P. M. Beijers, S. Brandenburg, H. R. Kremers, J. Mulder, and S. Saminathan, “ECR Ion Source Development at the AGOR Facility”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper MOPCP053, pp. 156-158.
- M. Sanchez Barrueta, G. O. Bolme, J. T. M. Lyles, R. Z. Pinsky, and J. E. Zane, “X-Ray Detector Array for Spatial and Temporal Diagnostic at the LANSCE Linac”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 47-50.
- D. C. Kiselev et al., “IMPACT: A Substantial Upgrade to the HIPA Infrastructure at PSI”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper MOBO02, pp. 34-37.
- M. Yadav, O. Apsimon, C. E. Hansel, J. B. Rosenzweig, and C. P. Welsch, “Ion Motion in Flat Beam Plasma Accelerators”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 521-523.
- S. Farina, J. H. Lee, J. P. S. Martins, and D. P. Piso, “MicroTCA Generic Data Acquisition Systems at ESS”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 118-124.
- M. Y. Huang et al., “Study on the Important Technologies of 300MeV Upgrade for the CSNS Injection System”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3089-3092.
- P. Grand, “Vacuum Requirements for Linacs”, in Proc. 1963 Conf. on Proton Linear Accelerators (LINAC'63), New Heaven, CT, USA, Oct. 1963, paper 13-01, pp. 421-430.
- F. M. Alrumayan, A. Algaith, A. M. Hendy, J. F. Schneider, SA. AL-Ghamdi, and H. A. Kassim, “Magnetic Field Measurement System of CS-30 Cyclotron”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 196-198.
- H. Podlech et al., “Status of the Development of a Superconducting 352 MHz CH-Prototype Cavity”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP29, pp. 372-374.
- P. A. Thompson et al., “Status of the Quadrupoles for RHIC”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 503-506.
- M. Cavellier, “A New Process for Nitrogen Doping of Niobium Cavities”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 276.
- J. Willard, “A High Current Electron Gun Suitable for Use Down to 1 Nanosecond Pulse Length”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 87-93.
- R. W. Hamm and M. E. Hamm, “How to Create a Business out of Manufacturing Linacs”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEIFI01, pp. 1911-1915.
- K. Hiramoto and M. Nishi, “A Particle Tracking Method for Accelerators with Small Radius of Curvature”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 717-720.
- C. G. Li, J. H. Li, and S. Zheng, “The Electro-magnetic Field Simulation and Cavity Design of Ridgetron for High Power Electron Irradiation Accelerator”, in Proc. 12th Int. Computational Accelerator Physics Conf. (ICAP'15), Shanghai, China, Oct. 2015, pp. 58-60.
- K. Takayama et al., “A POP Experiment Scenario of Induction Synchrotron at the KEK 12GeV-PS”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB093, pp. 1807-1809.
- C. Birattari, M. Bonardi, F. Resmini, and A. Salomone, “Status Report on Radioisotope Production for Biomedical Purposes at Milan AVF Cyclotron”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper GP-02, pp. 693-695.
- P. Kolb, Y. Gao, C. Pai, R. Porqueddu, K. S. Smith, and W. Xu, “Dual-ridge Waveguide Load Design for eRHIC”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 177-179.
- J. T. Weir, J. K. Boyd, G. J. Caporaso, and T. J. Orzechowski, “Experimental Results of Beam Brightness Improvements at the Advanced Test Accelerator (ATA)”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 934-936.
- O. A. Schmidt et al., “Horizontal-Gap Vertically-Polarizing Undulator (HGVPU) Design Challenges and Resolutions”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 288-292.
- P. Elleaume, “A New Approach to the Electron Beam Dynamics in Undulators and Wigglers”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 661-664.
- J. T. Maniscalco, T. Gruber, A. T. Holic, and M. Liepe, “Progress Towards Commissioning the Cornell DC Field Dependence Cavity”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 543-546.
- N. A. Vinokurov et al., “Status of the Novosibirsk Terahertz FEL”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper TUCOS01, pp. XX-XX.
- R. E. Worsham, “Stability and Tolerance of the Separated Orbit Cyclotron”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 644-648.
- A. H. Lumpkin and B. X. Yang, “Commissioning Results of the APS Storage Ring Photon Monitor Systems”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEO04A, pp. 343-345.
- A. Vergara-Fern?índez, R. Denz, and F. Rodr?¡guez-Mateos, “Reliability Analysis for the Quench Detection in the LHC Machine”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPLE012, pp. 2445-2447.
- R. Panas et al., “The impact of insertion devices on Solaris storage ring optics”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPB052, this conference.
- J. T. Maniscalco, T. Arias, D. Liarte, M. Liepe, J. P. Sethna, and N. Sitaraman, “Theoretical Analysis of Quasiparticle Overheating, Positive Q-Slope, and Vortex Losses in SRF Cavities”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3020-3023.
- S. A. Cherenshchikov, G. M. Ivanov, L. A. Makhnenko, and A. N. Opanasenko, “Secondary Emission Magnetron Injection Gun for Linac”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA38, pp. 1976-1978.
- S. Posen, M. Merio, A. Romanenko, and Y. Trenikhina, “Fermilab Nb3Sn R&D Program”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB048, pp. 678-680.
- V. Ivanov, “Computational Models forChannel Plate Simulations”, in Proc. 10th Int. Computational Accelerator Physics Conf. (ICAP'09), San Francisco, CA, USA, Aug.-Sep. 2009, paper THPSC021, pp. 300-303.
Back to search