Favourites
For Word
[n] V. V. Parkhomchuk and S. Nagaitsev, “Development of Electron Coolers in Novosibirsk”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEXA02, pp. 2068-2072.
[n] H. Sun et al., “RF System of the CSNS Synchrotron”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI028, pp. 2765-2767.
[n] P. Zisopoulos, F. Antoniou, and Y. Papaphilippou, “Parametric Study of the CLIC Damping Rings Delay Ring for Reaching Isochronicity Conditions”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR056, pp. 1948-1950.
[n] G. Rumolo et al., “Electron Cloud Observations in LHC”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THOBA01, pp. 2862-2864.
[n] N. J. Evans, S. E. Kopp, and E. Prebys, “An Estimate of Out of Time Beam Upon Extraction for Mu2e”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR028, pp. 2994-2996.
[n] G. Sterbini, J. F. Comblin, V. Forte, A. Guerrero, and E. Piselli, “Emittance Characterisation of High Brightness Beams in the CERN PS”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 299-302. doi:10.18429/JACoW-IPAC2016-MOPMR028
[n] A. Burrill et al., “First Horizontal Test Results of the HZB SRF Photoinjector for BERLinPro”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2768-2770. doi:10.18429/JACoW-IPAC2015-WEPMA011
[n] A. Faus-Golfe et al., “Upgrade and Systematic Measurement Campaign of the ATF2 Multi-OTR System”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWO023, pp. 933-935.
[n] M. Benedikt, B. Goddard, D. Schulte, F. Zimmermann, and M. J. Syphers, “FCC-hh Hadron Collider - Parameter Scenarios and Staging Options”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2173-2176. doi:10.18429/JACoW-IPAC2015-TUPTY062
[n] C. Bracco et al., “Studies on Transverse Painting for H- Injection into the PSB”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS052, pp. 3544-3546.
[n] D. V. Neuffer, K. Yonehara, C. M. Ankenbrandt, and C. Y. Yoshikawa, “Use of Helical Transport Channels for Bunch Recombination”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC034, pp. 205-207.
[n] J. Peng et al., “Commissioning Plan for the CSNS Linac”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO045, pp. 3869-3871.
[n] G. Kube et al., “Investigation of the Applicability of Parametric X-ray Radiation for Transverse Beam Profile Diagnostics”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME011, pp. 491-493.
[n] Y. I. Levinsen, H. Burkhardt, A. Macpherson, M. Pereira, and S. X. Roe, “Fill Analysis and Experimental Background Observations in the LHC”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPZ020, pp. 1846-1848.
[n] N. Fuster Martinez et al., “Feasibility Study of a 2nd Generation Smith-Purcell Radiation Monitor for the ESTB at SLAC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME068, pp. 634-636.
[n] A. Lunin, A. Saini, N. Solyak, A. I. Sukhanov, and V. P. Yakovlev, “Alternative Cavity for H E Part of the Project X linac”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR029, pp. 2997-2999.
[n] S. Mallows, E. B. Holzer, A. P. Mechev, J. W. van Hoorne, and C. P. Welsch, “Requirements of a Beam Loss Monitoring System for the CLIC Two Beam Modules”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC171, pp. 2385-2387.
[n] V. Soldatov et al., “Engineering Design and Fabrication of X-band Damped Detuned Structure for the CLIC Study”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC037, pp. 154-156.
[n] G. E. Steele et al., “Comparison between Measured and Computed Temperatures of the Internal High Energy Beam Dump in the CERN SPS”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1373-1376. doi:10.18429/JACoW-IPAC2015-TUAD2
[n] A. Solodko et al., “Engineering Design and Fabrication of Tapered Damped X-band Accelerating Structures”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC038, pp. 157-159.
[n] K. Samuelsson, V. Hinrichsen, U. Blell, and P. J. Spiller, “Impedance of the Pulse Power Converter for the SIS100 Bipolar Extraction Kicker System”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS054, pp. 727-729.
[n] M. Eshraqi, “Design and Optimization of ESS LINAC”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS060, pp. 2634-2636.
[n] M. Y. Huang, J. Qiu, S. Wang, and S. Y. Xu, “Study on the Injection Optimization and Transverse Coupling for CSNS/RCS”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THEPPB005, pp. 3240-3242.
[n] W. Höfle, G. Kotzian, M. Schokker, and D. Valuch, “LHC Damper Beam Commissioning in 2010”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPO012, pp. 505-507.
[n] C. Vollinger, F. Caspers, and E. Jensen, “Permittivity and Permeability Measurement Methods for Particle Accelerator Related Materials”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3893-3895. doi:10.18429/JACoW-IPAC2014-THPRI054
[n] R. J. Barlow et al., “High Power Cyclotrons for the Neutrino Experiments DAEALUS and IsoDAR”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI071, pp. 446-448.
[n] S. M. Gibson et al., “A Fibre Coupled, Low Power Laserwire Emittance Scanner at CERN LINAC4”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3725-3728. doi:10.18429/JACoW-IPAC2014-THPME190
[n] J. Yang et al., “Femtosecond Photoinjector and Relativistic Electron Microscopy”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC057, pp. 1126-1128.
[n] Y. Alexahin and D. V. Neuffer, “Design of Accumulator and Compressor Rings for the Project-X Based Proton Driver”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC043, pp. 1260-1262.
For LaTeX
Use Complete Form
For BibTeX
References
- V. V. Parkhomchuk and S. Nagaitsev, “Development of Electron Coolers in Novosibirsk”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEXA02, pp. 2068-2072.
- H. Sun et al., “RF System of the CSNS Synchrotron”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI028, pp. 2765-2767.
- P. Zisopoulos, F. Antoniou, and Y. Papaphilippou, “Parametric Study of the CLIC Damping Rings Delay Ring for Reaching Isochronicity Conditions”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR056, pp. 1948-1950.
- G. Rumolo et al., “Electron Cloud Observations in LHC”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THOBA01, pp. 2862-2864.
- N. J. Evans, S. E. Kopp, and E. Prebys, “An Estimate of Out of Time Beam Upon Extraction for Mu2e”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPR028, pp. 2994-2996.
- G. Sterbini, J. F. Comblin, V. Forte, A. Guerrero, and E. Piselli, “Emittance Characterisation of High Brightness Beams in the CERN PS”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 299-302.
- A. Burrill et al., “First Horizontal Test Results of the HZB SRF Photoinjector for BERLinPro”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2768-2770.
- A. Faus-Golfe et al., “Upgrade and Systematic Measurement Campaign of the ATF2 Multi-OTR System”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWO023, pp. 933-935.
- M. Benedikt, B. Goddard, D. Schulte, F. Zimmermann, and M. J. Syphers, “FCC-hh Hadron Collider - Parameter Scenarios and Staging Options”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2173-2176.
- C. Bracco et al., “Studies on Transverse Painting for H- Injection into the PSB”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS052, pp. 3544-3546.
- D. V. Neuffer, K. Yonehara, C. M. Ankenbrandt, and C. Y. Yoshikawa, “Use of Helical Transport Channels for Bunch Recombination”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPC034, pp. 205-207.
- J. Peng et al., “Commissioning Plan for the CSNS Linac”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO045, pp. 3869-3871.
- G. Kube et al., “Investigation of the Applicability of Parametric X-ray Radiation for Transverse Beam Profile Diagnostics”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPME011, pp. 491-493.
- Y. I. Levinsen, H. Burkhardt, A. Macpherson, M. Pereira, and S. X. Roe, “Fill Analysis and Experimental Background Observations in the LHC”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPZ020, pp. 1846-1848.
- N. Fuster Martinez et al., “Feasibility Study of a 2nd Generation Smith-Purcell Radiation Monitor for the ESTB at SLAC”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPME068, pp. 634-636.
- A. Lunin, A. Saini, N. Solyak, A. I. Sukhanov, and V. P. Yakovlev, “Alternative Cavity for H E Part of the Project X linac”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPR029, pp. 2997-2999.
- S. Mallows, E. B. Holzer, A. P. Mechev, J. W. van Hoorne, and C. P. Welsch, “Requirements of a Beam Loss Monitoring System for the CLIC Two Beam Modules”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC171, pp. 2385-2387.
- V. Soldatov et al., “Engineering Design and Fabrication of X-band Damped Detuned Structure for the CLIC Study”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC037, pp. 154-156.
- G. E. Steele et al., “Comparison between Measured and Computed Temperatures of the Internal High Energy Beam Dump in the CERN SPS”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1373-1376.
- A. Solodko et al., “Engineering Design and Fabrication of Tapered Damped X-band Accelerating Structures”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC038, pp. 157-159.
- K. Samuelsson, V. Hinrichsen, U. Blell, and P. J. Spiller, “Impedance of the Pulse Power Converter for the SIS100 Bipolar Extraction Kicker System”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS054, pp. 727-729.
- M. Eshraqi, “Design and Optimization of ESS LINAC”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS060, pp. 2634-2636.
- M. Y. Huang, J. Qiu, S. Wang, and S. Y. Xu, “Study on the Injection Optimization and Transverse Coupling for CSNS/RCS”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THEPPB005, pp. 3240-3242.
- W. Höfle, G. Kotzian, M. Schokker, and D. Valuch, “LHC Damper Beam Commissioning in 2010”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPO012, pp. 505-507.
- C. Vollinger, F. Caspers, and E. Jensen, “Permittivity and Permeability Measurement Methods for Particle Accelerator Related Materials”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3893-3895.
- R. J. Barlow et al., “High Power Cyclotrons for the Neutrino Experiments DAEALUS and IsoDAR”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPFI071, pp. 446-448.
- S. M. Gibson et al., “A Fibre Coupled, Low Power Laserwire Emittance Scanner at CERN LINAC4”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3725-3728.
- J. Yang et al., “Femtosecond Photoinjector and Relativistic Electron Microscopy”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC057, pp. 1126-1128.
- Y. Alexahin and D. V. Neuffer, “Design of Accumulator and Compressor Rings for the Project-X Based Proton Driver”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPC043, pp. 1260-1262.
Back to search