Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] E. D. van Garderen, A. C. Starritt, Y. E. Tan, and K. Zingre, “Upgrade of the Booster Beam Position Monitors at the Australian Synchrotron”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD080, pp. 882-884.
[n] B. C. Jiang, S. Q. Tian, M. Z. Zhang, Q. L. Zhang, and Z. T. Zhentang, “On-axis Injection Scheme for Ultimate Storage Ring with Double RF Systems”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1657-1660. doi:10.18429/JACoW-IPAC2015-TUPJE018
[n] R. Maldonado, “Overview of X-Ray Lithography at IBM Using a Compact Storage Ring”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 542-547.
[n] D. J. Nicklaus et al., “An Erlang-Based Front End Framework for Accelerator Controls”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper THDAUST02, pp. 1264-1266.
[n] E. S. Fischer, A. Bleile, V. I. Datskov, V. Marusov, J. P. Meier, and P. J. Spiller, “Start of the Series Production for the Cryogenic Magnet Corrector Modules of FAIR”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4124-4127. doi:10.18429/JACoW-IPAC2019-THPTS010
[n] A. Ponton, “High Power Proton Linac Front-End: Beam Dynamics Investigation and Plans for the ESS”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS039, pp. 688-690.
[n] P. Leban and K. B. Scheidt, “Prototype Results with a Complete Beam Loss Monitor System Optimized for Synchrotron Light Sources”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1019-1021. doi:10.18429/JACoW-IPAC2015-MOPTY041
[n] D. R. Edstrom et al., “50-MeV Run of the IOTA/FAST Electron Accelerator”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 326-329. doi:10.18429/JACoW-NAPAC2016-TUPOA19
[n] L. G. Liu et al., “Commissioning of the SSRF Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC042, pp. 2079-2081.
[n] J. L. Biarrotte, “A Statistical Analysis of the Danger Induced by HOM Excitation in a Superconducting Linac”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH137, pp. 1098-1100.
[n] M. Clausen et al., “An XML Driven Graphical User Interface and Application Management Toolkit”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THCT005, pp. XX-XX.
[n] T. A. Schwarz et al., “Beam Tests of a High Pressure Gas-Filled Cavity for a Muon Collider”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEOBA03, pp. 2131-2133.
[n] M. J. Lee et al., “Mathematical Models for the Control Program of SLAC Linear Collider”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2155-2158.
[n] T. M. Taylor, “Superconducting Magnets for a Super LHC”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOYGB002, pp. 129-133.
[n] D. P. Rusthoi and E. A. Wadlinger, “First-, Second-, and Third-Order Achromatic Bend Systems for Free-Electron Laser Applications”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 607-610.
[n] N. Joshi et al., “Bead-pull analysis of HOM in X-band linearizer linac on CLARA, with update on HOM measurement system”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4859-4862. doi:10.18429/JACoW-IPAC2023-THPL172
[n] K. Noda et al., “New Treatment Research Facility Project at HIMAC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUOCRA01, pp. 1324-1326.
[n] R. H. Bassel, “Beam Extraction Studies for the ORIC”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59E06, pp. 246-250.
[n] B. J. A. Shepherd, J. A. Clarke, V. Bayliss, T. W. Bradshaw, and E. C. Longhi, “Modelling of a Short-period Superconducting Undulator”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2716-2718. doi:10.18429/JACoW-IPAC2014-WEPRI095
[n] Z. Xu et al., “Software Upgrade of Beam Diagnostics Readout System Based on PXIe Hardware”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 109-113. doi:10.18429/JACoW-IBIC2025-MOPCO18
[n] H. H. Li et al., “The Injection System of the SSRF Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC041, pp. 2076-2078.
[n] P. N. Prakash, K. K. Mistri, A. Roy, J. Sacharias, and S. S. Sonti, “Superconducting Low Beta Niobium Resonator for Heavy Ions”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB049, pp. 588-590.
[n] Z. Izaola et al., “Design of the Bilbao Accelerator Low Energy Extraction Lines”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP010, pp. 1519-1521.
[n] M. R. Shubaly, “Ion Source Development and Injector Design for ZEBRA”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper G204, pp. 251-253.
[n] G. Lopez, “Non Similarity Solution Approximation to the Thermal Hydraulic Quenchback in Superconductors”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2471-2474.
[n] E. B. Akubakirov et al., “Generation and Acceleration of High-current Annular Electron Beam in Linear Induction Accelerator and Microwave Power from Cherenkov TWT”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 34-37.
[n] C. Compton et al., “Studies of alternative techniques for niobium cavity fabrication”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP01, pp. XX-XX.
[n] B. Bing, T. M. Huang, Q. Ma, F. Meng, W. M. Pan, and K. X. Gu, “Design of Fundamental Power Coupler for High Intensity Heavy-ion Accelerator”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 183-185. doi:10.18429/JACoW-SRF2017-MOPB054
[n] T. L. Hart, T. H. Luo, D. J. Summers, and K. Paul, “End-to-End G4Beamline Simulation of an Inverse Cyclotron for Muon Cooling”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC046, pp. 238-240.
[n] R. L. Gluckstern and R. K. Cooper, “Beam Breakup with Random Initial Displacement”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2398-2400.
[n] S. Kumar and A. Mandal, “Start to End Simulation of High Current Injector using TRACEWIN Code”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 223-225. doi:10.18429/JACoW-IPAC2015-MOPWA047
[n] T. Koeth, “SC Cavities at 3.9 GHz”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUA09, pp. 193-193.
[n] N. Solyak, H. Edwards, I. Gonin, M. Foley, T. Khabiboulline, and D. Mitchell, “Development of the 3.9 GHz 3rd Harmonic Cavity at FNAL”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP43, pp. 429-431.
[n] J. E. Spencer, “Present Optics Options for TeV Colliders”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-35, pp. 526-530.
[n] I. Hsu, C.-C. Chu, and C. I. Yu, “Turn by Turn Beam Profile Monitor by Utilizing the Non-linearity of the Photo-detector”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1649-1652.
[n] E. G. Stern, R. Ainsworth, J. F. Amundson, and B. C. Brown, “Simulations of the Fermilab Recycler for Losses and Collimation”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 582-585. doi:10.18429/JACoW-IPAC2015-MOPMA019
[n] E. Demmel and W. Schmidt, “High Power Klystrons for High Energy Physics Research Applications”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3432-3435.
[n] L. Begin et al., “Portable Linac Using a CW Magnetron as Power Source”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP07J, pp. 743-745.
[n] P. A. Shcherbakov et al., “Materials for Fast Cycling Accelerator Superconducting Magnets”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper THPSC005, pp. 331-333.
[n] C. D. Moore, J. Firebaugh, P. Lucas, and P. Prieto, “Status of Resonant Extraction from the Fermilab Main Injector”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA73, pp. 1246-1248.
[n] R. M. Lill, F. Lenkszus, E. Norum, and A. Pietryla, “Design of the APS RF BPM Data Acquisition Upgrade”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT084, pp. 4156-4158.
[n] S. Seletsky, V. Tupikov, S. Nagaitsev, and A. Shemyakin, “Field Measurements in the Cooling Section Solenoid for the Recycler Cooler”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPDO012, pp. 2373-2375.
[n] L. Smith, “Orbit Studies Related to the Berkeley 88-Inch Cyclotron”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59A10, pp. 45-47.
[n] T. Shirai et al., “Recent Progress of New Cancer Therapy Facility at HIMAC”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS075, pp. 3604-3606.
[n] M. T. Heron et al., “The Diamond Light Source Control System”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH113, pp. 3068-3070.
[n] N. K. Bultman et al., “Mechanical Engineering of a Linac for the Spallation Neutron Source”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA86, pp. 3594-3596.
[n] T. Pieloni, J. Barranco, C. Tambasco, and X. Buffat, “Study of Beam-Beam Long Range Compensation with Octupoles”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2113-2116. doi:10.18429/JACoW-IPAC2017-TUPVA027
[n] E. I. Simakov et al., “Experimental Study of Wakefields in an X-band Photonic Band Gap Accelerating Structure”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2689-2691. doi:10.18429/JACoW-IPAC2015-WEPJE008
[n] P. N. Koufalis and M. Liepe, “Insights into the Role of C, N, and O Introduced by Low Temperature Baking on Niobium Cavity Performance”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2455-2457. doi:10.18429/JACoW-IPAC2018-WEPMF041
[n] E. G. Jacobson, R. L. Haffner, W. B. Ingalls, B. J. Meyer, and J. E. Stelzer, “Low-Stored-Energy 100-kV Regulator for Ion Sources at LANSCE”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4094, pp. 621-623.
[n] O. A. Nezhevenko, J. L. Hirshfield, V. P. Yakovlev, A. K. Kinkead, A. W. Fliflet, and S. H. Gold, “Status of X-Band Pulsed Magnicon Project”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH107, pp. 1023-1025.
[n] S. Adam, W. Joho, P. Lanz, H. Leber, N. Schmid, and U. Schryber, “First Operation of a Flattop Accelerating System in an Isochronous Cyclotron”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2721-2724.
[n] R. K. Kutschke, J. Steimel, R. C. Webber, and S. A. Wolbers, “Simultaneous Position Measurements of Protons and Anti-Protons in the Tevatron”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT018, pp. 1613-1615.
[n] A. Macridin, J. F. Amundson, and E. G. Stern, “Numerical simulations of transverse modes in Gaussian bunches with space charge”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 575-578. doi:10.18429/JACoW-IPAC2015-MOPMA017
[n] H. Henke, “Millimeter Wave Linac and Wiggler Structures”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 322-327.
[n] M. Clausen, R. MacKenzie, R. Sass, H. Shoaee, K. Underwood, and G. White, “AIDA - Accelerator Integrated Data Access”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP011, pp. XX-XX.
[n] S. Wilde et al., “Physical Vapour Deposition of Thin Films for Use in Superconducting RF Cavities”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3249-3252. doi:10.18429/JACoW-IPAC2015-WEPHA059
For LaTeX
Use Complete Form
For BibTeX
References
- E. D. van Garderen, A. C. Starritt, Y. E. Tan, and K. Zingre, “Upgrade of the Booster Beam Position Monitors at the Australian Synchrotron”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD080, pp. 882-884.
- B. C. Jiang, S. Q. Tian, M. Z. Zhang, Q. L. Zhang, and Z. T. Zhentang, “On-axis Injection Scheme for Ultimate Storage Ring with Double RF Systems”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1657-1660.
- R. Maldonado, “Overview of X-Ray Lithography at IBM Using a Compact Storage Ring”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 542-547.
- D. J. Nicklaus et al., “An Erlang-Based Front End Framework for Accelerator Controls”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper THDAUST02, pp. 1264-1266.
- E. S. Fischer, A. Bleile, V. I. Datskov, V. Marusov, J. P. Meier, and P. J. Spiller, “Start of the Series Production for the Cryogenic Magnet Corrector Modules of FAIR”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4124-4127.
- A. Ponton, “High Power Proton Linac Front-End: Beam Dynamics Investigation and Plans for the ESS”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS039, pp. 688-690.
- P. Leban and K. B. Scheidt, “Prototype Results with a Complete Beam Loss Monitor System Optimized for Synchrotron Light Sources”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1019-1021.
- D. R. Edstrom et al., “50-MeV Run of the IOTA/FAST Electron Accelerator”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 326-329.
- L. G. Liu et al., “Commissioning of the SSRF Storage Ring”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC042, pp. 2079-2081.
- J. L. Biarrotte, “A Statistical Analysis of the Danger Induced by HOM Excitation in a Superconducting Linac”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH137, pp. 1098-1100.
- M. Clausen et al., “An XML Driven Graphical User Interface and Application Management Toolkit”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THCT005, pp. XX-XX.
- T. A. Schwarz et al., “Beam Tests of a High Pressure Gas-Filled Cavity for a Muon Collider”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEOBA03, pp. 2131-2133.
- M. J. Lee et al., “Mathematical Models for the Control Program of SLAC Linear Collider”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2155-2158.
- T. M. Taylor, “Superconducting Magnets for a Super LHC”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOYGB002, pp. 129-133.
- D. P. Rusthoi and E. A. Wadlinger, “First-, Second-, and Third-Order Achromatic Bend Systems for Free-Electron Laser Applications”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 607-610.
- N. Joshi et al., “Bead-pull analysis of HOM in X-band linearizer linac on CLARA, with update on HOM measurement system”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL172, pp. 4859-4862.
- K. Noda et al., “New Treatment Research Facility Project at HIMAC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUOCRA01, pp. 1324-1326.
- R. H. Bassel, “Beam Extraction Studies for the ORIC”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59E06, pp. 246-250.
- B. J. A. Shepherd, J. A. Clarke, V. Bayliss, T. W. Bradshaw, and E. C. Longhi, “Modelling of a Short-period Superconducting Undulator”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2716-2718.
- Z. Xu et al., “Software Upgrade of Beam Diagnostics Readout System Based on PXIe Hardware”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 109-113.
- H. H. Li et al., “The Injection System of the SSRF Storage Ring”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC041, pp. 2076-2078.
- P. N. Prakash, K. K. Mistri, A. Roy, J. Sacharias, and S. S. Sonti, “Superconducting Low Beta Niobium Resonator for Heavy Ions”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPB049, pp. 588-590.
- Z. Izaola et al., “Design of the Bilbao Accelerator Low Energy Extraction Lines”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP010, pp. 1519-1521.
- M. R. Shubaly, “Ion Source Development and Injector Design for ZEBRA”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper G204, pp. 251-253.
- G. Lopez, “Non Similarity Solution Approximation to the Thermal Hydraulic Quenchback in Superconductors”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2471-2474.
- E. B. Akubakirov et al., “Generation and Acceleration of High-current Annular Electron Beam in Linear Induction Accelerator and Microwave Power from Cherenkov TWT”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 34-37.
- C. Compton et al., “Studies of alternative techniques for niobium cavity fabrication”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP01, pp. XX-XX.
- B. Bing, T. M. Huang, Q. Ma, F. Meng, W. M. Pan, and K. X. Gu, “Design of Fundamental Power Coupler for High Intensity Heavy-ion Accelerator”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 183-185.
- T. L. Hart, T. H. Luo, D. J. Summers, and K. Paul, “End-to-End G4Beamline Simulation of an Inverse Cyclotron for Muon Cooling”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPC046, pp. 238-240.
- R. L. Gluckstern and R. K. Cooper, “Beam Breakup with Random Initial Displacement”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2398-2400.
- S. Kumar and A. Mandal, “Start to End Simulation of High Current Injector using TRACEWIN Code”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 223-225.
- T. Koeth, “SC Cavities at 3.9 GHz”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUA09, pp. 193-193.
- N. Solyak, H. Edwards, I. Gonin, M. Foley, T. Khabiboulline, and D. Mitchell, “Development of the 3.9 GHz 3rd Harmonic Cavity at FNAL”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP43, pp. 429-431.
- J. E. Spencer, “Present Optics Options for TeV Colliders”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH3-35, pp. 526-530.
- I. Hsu, C.-C. Chu, and C. I. Yu, “Turn by Turn Beam Profile Monitor by Utilizing the Non-linearity of the Photo-detector”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1649-1652.
- E. G. Stern, R. Ainsworth, J. F. Amundson, and B. C. Brown, “Simulations of the Fermilab Recycler for Losses and Collimation”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 582-585.
- E. Demmel and W. Schmidt, “High Power Klystrons for High Energy Physics Research Applications”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3432-3435.
- L. Begin et al., “Portable Linac Using a CW Magnetron as Power Source”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP07J, pp. 743-745.
- P. A. Shcherbakov et al., “Materials for Fast Cycling Accelerator Superconducting Magnets”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper THPSC005, pp. 331-333.
- C. D. Moore, J. Firebaugh, P. Lucas, and P. Prieto, “Status of Resonant Extraction from the Fermilab Main Injector”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA73, pp. 1246-1248.
- R. M. Lill, F. Lenkszus, E. Norum, and A. Pietryla, “Design of the APS RF BPM Data Acquisition Upgrade”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT084, pp. 4156-4158.
- S. Seletsky, V. Tupikov, S. Nagaitsev, and A. Shemyakin, “Field Measurements in the Cooling Section Solenoid for the Recycler Cooler”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPDO012, pp. 2373-2375.
- L. Smith, “Orbit Studies Related to the Berkeley 88-Inch Cyclotron”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59A10, pp. 45-47.
- T. Shirai et al., “Recent Progress of New Cancer Therapy Facility at HIMAC”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS075, pp. 3604-3606.
- M. T. Heron et al., “The Diamond Light Source Control System”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH113, pp. 3068-3070.
- N. K. Bultman et al., “Mechanical Engineering of a Linac for the Spallation Neutron Source”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA86, pp. 3594-3596.
- T. Pieloni, J. Barranco, C. Tambasco, and X. Buffat, “Study of Beam-Beam Long Range Compensation with Octupoles”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2113-2116.
- E. I. Simakov et al., “Experimental Study of Wakefields in an X-band Photonic Band Gap Accelerating Structure”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2689-2691.
- P. N. Koufalis and M. Liepe, “Insights into the Role of C, N, and O Introduced by Low Temperature Baking on Niobium Cavity Performance”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2455-2457.
- E. G. Jacobson, R. L. Haffner, W. B. Ingalls, B. J. Meyer, and J. E. Stelzer, “Low-Stored-Energy 100-kV Regulator for Ion Sources at LANSCE”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4094, pp. 621-623.
- O. A. Nezhevenko, J. L. Hirshfield, V. P. Yakovlev, A. K. Kinkead, A. W. Fliflet, and S. H. Gold, “Status of X-Band Pulsed Magnicon Project”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH107, pp. 1023-1025.
- S. Adam, W. Joho, P. Lanz, H. Leber, N. Schmid, and U. Schryber, “First Operation of a Flattop Accelerating System in an Isochronous Cyclotron”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2721-2724.
- R. K. Kutschke, J. Steimel, R. C. Webber, and S. A. Wolbers, “Simultaneous Position Measurements of Protons and Anti-Protons in the Tevatron”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT018, pp. 1613-1615.
- A. Macridin, J. F. Amundson, and E. G. Stern, “Numerical simulations of transverse modes in Gaussian bunches with space charge”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 575-578.
- H. Henke, “Millimeter Wave Linac and Wiggler Structures”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 322-327.
- M. Clausen, R. MacKenzie, R. Sass, H. Shoaee, K. Underwood, and G. White, “AIDA - Accelerator Integrated Data Access”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAP011, pp. XX-XX.
- S. Wilde et al., “Physical Vapour Deposition of Thin Films for Use in Superconducting RF Cavities”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3249-3252.
Back to search