Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] F. Valentini, T. Ladzinski, P. Ninin, and L. Scibile, “Safety Testing for LHC Access System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPD037, pp. 532-534.
[n] Y. W. Kang and D. Horan, “Reconfigurable High-Power RF System in the APS”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2P026, pp. 2935-2937.
[n] K. H. Kim et al., “The PXI and VMEbus supports for the Linux based EPICS”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_083.
[n] T. Kii et al., “Slippage Effect on the Table-Top THz FEL Amplifier Project in Kyoto University”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC68, pp. 390-393.
[n] A. N. Johnson and R. Lange, “Evolutionary Plans For EPICS Version 3”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEA003, pp. 364-366.
[n] S. H. Chang et al., “The Effect of Improving the Temperature Variation at the SSRC Storage Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP4B19, pp. 2483-2485.
[n] C. Boffo, C. A. Cooper, G. Galasso, and A. M. Rowe, “Optimization of the BCP Processing of Elliptical Nb SRF Cavities”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH174, pp. 469-471.
[n] J. Bosser, G. Ferioli, J. Koopman, and J. Mann, “Beam Transfer Monitors for the Operation of the SPS with Oxygen”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 732-735.
[n] K. J. Bertsche, W. Wittmer, B. Bolzon, L. Brunetti, A. Jeremie, and S. Tomassini, “Vibration Budget for SuperB”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP069, pp. 2261-2263.
[n] M. T. Heron, J. R. Alexander, and P. D. Quinn, “A Report on the Review and Formal Analysis of the SRS Personnel Safety System”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH125, pp. 2769-2771.
[n] G. Fischerauer and T. Weiland, “Three Dimensional Computer Design of Multi-Cell Accelerating Cavities”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 931-934.
[n] J. I. M. Botman, A. F. J. Hammen, and W. H. C. Theuws, “Injection Optimization into an RTM”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP2A01, pp. 1498-1500.
[n] C. Rodrigues, L. H. Oliveira, and A. R. Silva, “A New Family of Power Supplies for the LNLS Orbit Correctors”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN003, pp. 146-148.
[n] C. H. Shim, J. H. Hong, and H. Yang, “Study on Effect of Phase Shifter on FEL Intensity at PAL-XFEL”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4372-4374. doi:10.18429/JACoW-IPAC2018-THPMK034
[n] T. V. Zolkin, Y. Kharkov, I. A. Morozov, and S. Nagaitsev, “A Model Ring With Exactly Solvable Nonlinear Motion”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOODB2, pp. 78-80.
[n] J. D. Gonz?ílez Cobas et al., “Free and Open Source Software at CERN: Integration of Drivers in the Linux Kernel”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper THCHMUST04, pp. 1248-1251.
[n] M. Olvegaard et al., “Overview of the ESSnuSB Accumulator Ring”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 105-109. doi:10.18429/JACoW-HB2016-MOPR021
[n] R. L. Keizer et al., “Design and Performance of a Prototype Synchronous High Tension Discharge Switch for the Separation System of the LEP ee- Collider”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1190-1193.
[n] T. G. Lucas, P. J. Giansiracusa, D. J. Peake, R. P. Rassool, M. J. Boland, and R. J. Steinhagen, “An Optical Intra-Bunch Instability Monitor for Short Electron Bunches”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 161-164. doi:10.18429/JACoW-IBIC2015-MOPB049
[n] H. R?Âcken et al., “Progress at Varian's Superconducting Cyclotrons: A Base for the ProBeamTM Platform”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper MOPPT012, pp. 55-57.
[n] A. Chmielinska and M. J. Barnes, “New Spiral Beam Screen Design for the FCC-hh Injection Kicker Magnet”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 270-273. doi:10.18429/JACoW-IPAC2019-MOPGW074
[n] J. Q. Wang, Z. Y. Guo, Y. D. Liu, Q. Qin, Z. Zhao, and D. M. Zhou, “Beam Instabilitiy Studies of BEPC and BEPCII”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT119, pp. 2131-2133.
[n] C. E. Mitchell et al., “Higher-Order Moment Models of Longitudinal Pulse Shape Evolution in Photoinjectors”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP019, pp. 722-725.
[n] E. L?®corch?® and G. S?®n?®cal, “Use of a CMMS Piece of Software to Improve Maintenance Management at Ganil”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP523, pp. XX-XX.
[n] V. C. Palladino and L. Coney, “Status of the MICE Muon Ionization Cooling Experiment”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP057, pp. 1680-1682.
[n] M. P. Sangroula, R. M. Lill, R. R. Lindberg, and X. Sun, “Impedance Measurement of Vacuum Chamber Components for the Advance Photon Source (APS) Upgrade”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3583-3586. doi:10.18429/JACoW-IPAC2017-WEPVA134
[n] J. Kim et al., “In Situ SEY Measurements at CesrTA”, in Proc. ECLOUD'10, Ithaca, NY, USA, Oct. 2010, paper PST12, pp. 140-146.
[n] S. Ryu, S. Choi, D. Jeon, and J. H. Lee, “Status Report of RAON Control System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC106, pp. 356-358.
[n] A. T. Wu et al., “Buffered Electropolishing ÔÇô A New Way for Achieving Extremely Smooth Surface Finish on Nb SRF Cavities to be Used in Particle Accelerators”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP060, pp. 2141-2143.
[n] M. E. Castro Carballo, “Performance of the Fast Beam Conditions Monitor BCM1F in the CMS Experiment at the LHC”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD83, pp. 239-241.
[n] V. Nassisi, F. Belloni, D. Doria, A. Lorusso, M. V. Siciliano, and L. Velardi, “New Pulsed Current and Voltage Circuits Based on Transmission Lines”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH140, pp. 3122-3124.
[n] C. C. Peters, T. B. Southern, W. Blokland, and T. A. Justice, “Minimizing Errant Beam at the Spallation Neutron Source”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 491-498. doi:10.18429/JACoW-IBIC2017-TH2AB1
[n] N. V. Mokhov, A. Drozhdin, P. H. Kasper, J. R. Lackey, E. J. Prebys, and R. C. Webber, “Fermilab Booster Beam Collimation and Shielding”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG033, pp. 1503-1505.
[n] G. Loisch et al., “Optimisation of High Transformer Ratio Plasma Wakefield Acceleration at PITZ”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1648-1650. doi:10.18429/JACoW-IPAC2018-TUPML047
[n] K. Chida, K. Noda, T. Tanabe, and I. Watanabe, “An Electrostatic Storage Ring for Molecular Science”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP3B16, pp. 797-802.
[n] A. Novokhatski, S. A. Heifets, and D. Teytelman, “High Current Effects in the PEP-II SLAC B-factory”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS077, pp. 4225-4227.
[n] C. H. Kuo, J. Chen, K. T. Hsu, K. H. Hu, W. K. Lau, and M. S. Yeh, “Development and Diagnostic Tools in the Feedback System of SRRC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH303, pp. 1619-1621.
[n] A. Gilmour, W. R. Araujo, and J. M. Polli, “Thermo-Mechanical Aspects of the MOBIPIX, a Compact X-Ray Imaging System with Embedded GPU”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 223-226. doi:10.18429/JACoW-MEDSI2018-WEPH12
[n] M. Drury et al., “SNS Medium Beta Cryomodule Performance”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP31, pp. 379-381.
[n] S. Savazzi et al., “Optics and Commissioning of the CNAO Experimental Beam Line”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3472-3474. doi:10.18429/JACoW-IPAC2019-THPMP011
[n] O. N. Borisov, B. Gikal, G. Gulbekian, I. A. Ivanenko, and I. V. Kalagin, “Optimisation of the Axial Injection System for U400 Cyclotron Linear Buncher”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP3A13, pp. 1468-1470.
[n] M. Huyse et al., “A Radioactive Ion Beam Facility at Louvain-La-Neuve”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1491-1494.
[n] N. Patel, J. S. Diamond, N. Eddy, C. R. McClure, P. S. Prieto, and D. C. Voy, “Beam Position Monitoring System for FermilabÔÇÖs Muon Campus”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 648-650. doi:10.18429/JACoW-IBIC2019-WEPP044
[n] O. Kamigaito et al., “Status of RIBF Accelerators at RIKEN”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper TUM2CIO01, pp. 286-291.
[n] G. Biallas et al., “Magnetic Modeling vs. Measurements of the Dipoles for the JLAB KW Free Electron Laser Upgrade”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB065, pp. 2186-2188.
[n] S. Lederer et al., “Conditioning of a New Gun Cavity Towards 60 MV/m at PITZ”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN026, pp. 971-973.
[n] A. Bogomyagkov, S. Nikitin, V. Telnov, and G. Tumaikin, “Estimation of Errors in Definition of Central Mass Energy in High Precision Experiments on Colliding Beams.”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP11002, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- F. Valentini, T. Ladzinski, P. Ninin, and L. Scibile, “Safety Testing for LHC Access System”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPD037, pp. 532-534.
- Y. W. Kang and D. Horan, “Reconfigurable High-Power RF System in the APS”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2P026, pp. 2935-2937.
- K. H. Kim et al., “The PXI and VMEbus supports for the Linux based EPICS”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P3_083.
- T. Kii et al., “Slippage Effect on the Table-Top THz FEL Amplifier Project in Kyoto University”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUPC68, pp. 390-393.
- A. N. Johnson and R. Lange, “Evolutionary Plans For EPICS Version 3”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEA003, pp. 364-366.
- S. H. Chang et al., “The Effect of Improving the Temperature Variation at the SSRC Storage Ring”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP4B19, pp. 2483-2485.
- C. Boffo, C. A. Cooper, G. Galasso, and A. M. Rowe, “Optimization of the BCP Processing of Elliptical Nb SRF Cavities”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH174, pp. 469-471.
- J. Bosser, G. Ferioli, J. Koopman, and J. Mann, “Beam Transfer Monitors for the Operation of the SPS with Oxygen”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 732-735.
- K. J. Bertsche, W. Wittmer, B. Bolzon, L. Brunetti, A. Jeremie, and S. Tomassini, “Vibration Budget for SuperB”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP069, pp. 2261-2263.
- M. T. Heron, J. R. Alexander, and P. D. Quinn, “A Report on the Review and Formal Analysis of the SRS Personnel Safety System”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH125, pp. 2769-2771.
- G. Fischerauer and T. Weiland, “Three Dimensional Computer Design of Multi-Cell Accelerating Cavities”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 931-934.
- J. I. M. Botman, A. F. J. Hammen, and W. H. C. Theuws, “Injection Optimization into an RTM”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP2A01, pp. 1498-1500.
- C. Rodrigues, L. H. Oliveira, and A. R. Silva, “A New Family of Power Supplies for the LNLS Orbit Correctors”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN003, pp. 146-148.
- C. H. Shim, J. H. Hong, and H. Yang, “Study on Effect of Phase Shifter on FEL Intensity at PAL-XFEL”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4372-4374.
- T. V. Zolkin, Y. Kharkov, I. A. Morozov, and S. Nagaitsev, “A Model Ring With Exactly Solvable Nonlinear Motion”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOODB2, pp. 78-80.
- J. D. Gonz?ílez Cobas et al., “Free and Open Source Software at CERN: Integration of Drivers in the Linux Kernel”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper THCHMUST04, pp. 1248-1251.
- M. Olvegaard et al., “Overview of the ESSnuSB Accumulator Ring”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 105-109.
- R. L. Keizer et al., “Design and Performance of a Prototype Synchronous High Tension Discharge Switch for the Separation System of the LEP ee- Collider”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1190-1193.
- T. G. Lucas, P. J. Giansiracusa, D. J. Peake, R. P. Rassool, M. J. Boland, and R. J. Steinhagen, “An Optical Intra-Bunch Instability Monitor for Short Electron Bunches”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 161-164.
- H. R?Âcken et al., “Progress at Varian's Superconducting Cyclotrons: A Base for the ProBeamTM Platform”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper MOPPT012, pp. 55-57.
- A. Chmielinska and M. J. Barnes, “New Spiral Beam Screen Design for the FCC-hh Injection Kicker Magnet”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 270-273.
- J. Q. Wang, Z. Y. Guo, Y. D. Liu, Q. Qin, Z. Zhao, and D. M. Zhou, “Beam Instabilitiy Studies of BEPC and BEPCII”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT119, pp. 2131-2133.
- C. E. Mitchell et al., “Higher-Order Moment Models of Longitudinal Pulse Shape Evolution in Photoinjectors”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THP019, pp. 722-725.
- E. L?®corch?® and G. S?®n?®cal, “Use of a CMMS Piece of Software to Improve Maintenance Management at Ganil”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP523, pp. XX-XX.
- V. C. Palladino and L. Coney, “Status of the MICE Muon Ionization Cooling Experiment”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP057, pp. 1680-1682.
- M. P. Sangroula, R. M. Lill, R. R. Lindberg, and X. Sun, “Impedance Measurement of Vacuum Chamber Components for the Advance Photon Source (APS) Upgrade”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3583-3586.
- J. Kim et al., “In Situ SEY Measurements at CesrTA”, in Proc. 49th ICFA Advanced Beam Dynamics Workshop on Electron Cloud Physics (ECLOUD'10), Ithaca, NY, USA, Oct. 2010, paper PST12, pp. 140-146.
- S. Ryu, S. Choi, D. Jeon, and J. H. Lee, “Status Report of RAON Control System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC106, pp. 356-358.
- A. T. Wu et al., “Buffered Electropolishing ÔÇô A New Way for Achieving Extremely Smooth Surface Finish on Nb SRF Cavities to be Used in Particle Accelerators”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP060, pp. 2141-2143.
- M. E. Castro Carballo, “Performance of the Fast Beam Conditions Monitor BCM1F in the CMS Experiment at the LHC”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD83, pp. 239-241.
- V. Nassisi, F. Belloni, D. Doria, A. Lorusso, M. V. Siciliano, and L. Velardi, “New Pulsed Current and Voltage Circuits Based on Transmission Lines”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH140, pp. 3122-3124.
- C. C. Peters, T. B. Southern, W. Blokland, and T. A. Justice, “Minimizing Errant Beam at the Spallation Neutron Source”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 491-498.
- N. V. Mokhov, A. Drozhdin, P. H. Kasper, J. R. Lackey, E. J. Prebys, and R. C. Webber, “Fermilab Booster Beam Collimation and Shielding”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAG033, pp. 1503-1505.
- G. Loisch et al., “Optimisation of High Transformer Ratio Plasma Wakefield Acceleration at PITZ”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1648-1650.
- K. Chida, K. Noda, T. Tanabe, and I. Watanabe, “An Electrostatic Storage Ring for Molecular Science”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP3B16, pp. 797-802.
- A. Novokhatski, S. A. Heifets, and D. Teytelman, “High Current Effects in the PEP-II SLAC B-factory”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS077, pp. 4225-4227.
- C. H. Kuo, J. Chen, K. T. Hsu, K. H. Hu, W. K. Lau, and M. S. Yeh, “Development and Diagnostic Tools in the Feedback System of SRRC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH303, pp. 1619-1621.
- A. Gilmour, W. R. Araujo, and J. M. Polli, “Thermo-Mechanical Aspects of the MOBIPIX, a Compact X-Ray Imaging System with Embedded GPU”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 223-226.
- M. Drury et al., “SNS Medium Beta Cryomodule Performance”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP31, pp. 379-381.
- S. Savazzi et al., “Optics and Commissioning of the CNAO Experimental Beam Line”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3472-3474.
- O. N. Borisov, B. Gikal, G. Gulbekian, I. A. Ivanenko, and I. V. Kalagin, “Optimisation of the Axial Injection System for U400 Cyclotron Linear Buncher”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP3A13, pp. 1468-1470.
- M. Huyse et al., “A Radioactive Ion Beam Facility at Louvain-La-Neuve”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1491-1494.
- N. Patel, J. S. Diamond, N. Eddy, C. R. McClure, P. S. Prieto, and D. C. Voy, “Beam Position Monitoring System for FermilabÔÇÖs Muon Campus”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 648-650.
- O. Kamigaito et al., “Status of RIBF Accelerators at RIKEN”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper TUM2CIO01, pp. 286-291.
- G. Biallas et al., “Magnetic Modeling vs. Measurements of the Dipoles for the JLAB KW Free Electron Laser Upgrade”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB065, pp. 2186-2188.
- S. Lederer et al., “Conditioning of a New Gun Cavity Towards 60 MV/m at PITZ”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN026, pp. 971-973.
- A. Bogomyagkov, S. Nikitin, V. Telnov, and G. Tumaikin, “Estimation of Errors in Definition of Central Mass Energy in High Precision Experiments on Colliding Beams.”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP11002, pp. XX-XX.
Back to search