Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. Boutin, A. Chance, B. Dalena, B. J. Holzer, and D. Schulte, “Progress on the Optics Corrections of FCC-hh”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2019-2022. doi:10.18429/JACoW-IPAC2017-TUPVA001
[n] G. Goin, “Status Report on the C.N.R.S. Orleans' Cyclotron”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper A-11, pp. 1927-1929.
[n] K. Ruisard, A. Aleksandrov, S. Cousineau, A. Hoover, T. Thompson, and A. Zhukov, “Measurements at peak operational beam current in the SNS beam test facility”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2713-2716. doi:10.18429/JACoW-IPAC2023-WEPA027
[n] T. Grimm, W. Hartung, and S. E. Musser, “X-Ray Tomography of Superconducting RF Cavities”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB068, pp. 1356-1358.
[n] J. L. Revol et al., “Operation and Recent Developments of the ESRF”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB013, pp. 854-856.
[n] J. van Zeijts, T. D'Ottavio, B. Frak, and R. Michnoff, “The RHIC Sequencer”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH008, pp. 782-784.
[n] Z. Greenwald and D. L. Rubin, “CESR IV Proposed Transfer Line Design”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA95, pp. 1300-1302.
[n] G. V. Dolbilov et al., “Development of Linear Induction Accelerators at JINR”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-03, pp. 363-365.
[n] F. Blas et al., “Conversion of the PS Complex as LHC Proton Pre-Injector”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9W011, pp. 973-975.
[n] Z. Greenwald, S. Greenwald, and D. H. Rice, “REC Quadrupole's Beam Pipe Temperature Control”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P042, pp. 3705-3707.
[n] H. Lengeler, “Design of Superconducting Accelerator Cavities”, in Proc. SRF'80, Karlsruhe, Germany, Jul. 1980, paper SRF80-10, pp. XX-XX.
[n] E. Takasaki, Z. Igarashi, F. Naito, K. Nanmo, and T. Takenaka, “Fields Induced by Chopped Beams in the Tank Cavity”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4058, pp. 183-185.
[n] S. Jacobsen, G. Molinari, and H. Mulder, “A Feedback System to Control the Flux during Ultra Slow Extraction at LEAR”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP014L, pp. 1845-1847.
[n] J. Lewis and P. Heymans, “The Program Line Sequencer, A New Approach”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 640-643.
[n] T. Grimm, W. Hartung, M. Johnson, P. Kneisel, L. Turlington, and R. York, “Cryomodule Design for the Rare Isotope Accelerator”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB066, pp. 1350-1352.
[n] J. Fernandez Cortes, E. Blanco Vinuela, and L. A. Gonzalez, “Industrial Stepping Motors Integration in the UNICOS-CPC Framework”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1720-1724. doi:10.18429/JACoW-ICALEPCS2017-THPHA144
[n] T. Gorlov, A. Aleksandrov, F. Lin, N. Evans, and S. Cousineau, “Study of stripping magnets for LACE at the SNS”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3607-3609. doi:10.18429/JACoW-IPAC2024-THPR44
[n] A. Germinario, E. Blanco Viñuela, and B. Fernández Adiego, “Towards Automatic Generation of Fail-Safe PLC Code Compliant with Functional Safety Standards”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1449-1453. doi:10.18429/JACoW-ICALEPCS2023-THPDP059
[n] S. Henderson et al., “Beam Dump Window Design for the Spallation Neutron Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG020, pp. 1467-1469.
[n] L. Hardy et al., “Recent Developments for an Improved Operation at the ESRF”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH072, pp. 2617-2619.
[n] A. Ogata, K. Nakajima, and N. Yamamoto, “Longitudinal Instability in TRISTAN Main Ring Observed by a Streak Camera”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 809-812.
[n] B. Naranjo et al., “Pair Spectrometer for FACET-II”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4336-4339. doi:10.18429/JACoW-IPAC2021-THPAB270
[n] L. Rossi et al., “Magnet technology and design of superconducting magnets for heavy ion gantry for hadron therapy”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4978-4981. doi:10.18429/JACoW-IPAC2023-THPM041
[n] A. Drees, P. Cameron, R. Michnoff, C. Montag, and M. Wilinski, “RHIC Transverse Injection Damping”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPG044, pp. 2691-2693.
[n] V. Sajaev et al., “Commissioning of the Advanced Photon Source upgrade - the first swap-out injection-based synchrotron light source”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUCD2, unpublished.
[n] M. Kumada, K. Nakajima, H. Nakanishi, A. Ogata, and F. Q. Zhang, “Proposal of a Compact High Brightness Laser Synchrotron Light Source for Medical Applications”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP11C, pp. 2371-2373.
[n] V. Ptitsyn, “ERL-Ring and Ring-Ring Designs for the eRHIC Electron-Ion Collider”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 64-68. doi:10.18429/JACoW-NAPAC2016-MOB4IO02
[n] J. Kallestrup and F. Armborst, “TRIBs simulations for SLS 2.0”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1031-1034. doi:10.18429/JACoW-IPAC2023-MOPM022
[n] S. Tariq et al., “Design of the LBNF Beamline Target Station”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 146-148. doi:10.18429/JACoW-NAPAC2016-MOPOB35
[n] B. Bing, T. M. Huang, Q. Ma, F. Meng, W. M. Pan, and K. X. Gu, “Design of Fundamental Power Coupler for High Intensity Heavy-ion Accelerator”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 183-185. doi:10.18429/JACoW-SRF2017-MOPB054
[n] G. S?®n?®cal et al., “GANIL High Intensity Transport Safety System”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper D-04, pp. 291-293.
[n] S. Cousineau et al., “Towards operational reality with laser assisted charge exchange”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS003, unpublished.
For LaTeX
Use Complete Form
For BibTeX
References
- D. Boutin, A. Chance, B. Dalena, B. J. Holzer, and D. Schulte, “Progress on the Optics Corrections of FCC-hh”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2019-2022.
- G. Goin, “Status Report on the C.N.R.S. Orleans' Cyclotron”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper A-11, pp. 1927-1929.
- K. Ruisard, A. Aleksandrov, S. Cousineau, A. Hoover, T. Thompson, and A. Zhukov, “Measurements at peak operational beam current in the SNS beam test facility”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA027, pp. 2713-2716.
- T. Grimm, W. Hartung, and S. E. Musser, “X-Ray Tomography of Superconducting RF Cavities”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB068, pp. 1356-1358.
- J. L. Revol et al., “Operation and Recent Developments of the ESRF”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB013, pp. 854-856.
- J. van Zeijts, T. D'Ottavio, B. Frak, and R. Michnoff, “The RHIC Sequencer”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH008, pp. 782-784.
- Z. Greenwald and D. L. Rubin, “CESR IV Proposed Transfer Line Design”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA95, pp. 1300-1302.
- G. V. Dolbilov et al., “Development of Linear Induction Accelerators at JINR”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-03, pp. 363-365.
- F. Blas et al., “Conversion of the PS Complex as LHC Proton Pre-Injector”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9W011, pp. 973-975.
- Z. Greenwald, S. Greenwald, and D. H. Rice, “REC Quadrupole's Beam Pipe Temperature Control”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P042, pp. 3705-3707.
- H. Lengeler, “Design of Superconducting Accelerator Cavities”, in Proc. 1st Int. Conf. RF Superconductivity (SRF'80), Karlsruhe, Germany, Jul. 1980, paper SRF80-10, pp. XX-XX.
- E. Takasaki, Z. Igarashi, F. Naito, K. Nanmo, and T. Takenaka, “Fields Induced by Chopped Beams in the Tank Cavity”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper MO4058, pp. 183-185.
- S. Jacobsen, G. Molinari, and H. Mulder, “A Feedback System to Control the Flux during Ultra Slow Extraction at LEAR”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP014L, pp. 1845-1847.
- J. Lewis and P. Heymans, “The Program Line Sequencer, A New Approach”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 640-643.
- T. Grimm, W. Hartung, M. Johnson, P. Kneisel, L. Turlington, and R. York, “Cryomodule Design for the Rare Isotope Accelerator”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB066, pp. 1350-1352.
- J. Fernandez Cortes, E. Blanco Vinuela, and L. A. Gonzalez, “Industrial Stepping Motors Integration in the UNICOS-CPC Framework”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1720-1724.
- T. Gorlov, A. Aleksandrov, F. Lin, N. Evans, and S. Cousineau, “Study of stripping magnets for LACE at the SNS”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR44, pp. 3607-3609.
- A. Germinario, E. Blanco Viñuela, and B. Fernández Adiego, “Towards Automatic Generation of Fail-Safe PLC Code Compliant with Functional Safety Standards”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THPDP059, pp. 1449-1453.
- S. Henderson et al., “Beam Dump Window Design for the Spallation Neutron Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAG020, pp. 1467-1469.
- L. Hardy et al., “Recent Developments for an Improved Operation at the ESRF”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH072, pp. 2617-2619.
- A. Ogata, K. Nakajima, and N. Yamamoto, “Longitudinal Instability in TRISTAN Main Ring Observed by a Streak Camera”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 809-812.
- B. Naranjo et al., “Pair Spectrometer for FACET-II”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4336-4339.
- L. Rossi et al., “Magnet technology and design of superconducting magnets for heavy ion gantry for hadron therapy”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM041, pp. 4978-4981.
- A. Drees, P. Cameron, R. Michnoff, C. Montag, and M. Wilinski, “RHIC Transverse Injection Damping”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPG044, pp. 2691-2693.
- V. Sajaev et al., “Commissioning of the Advanced Photon Source upgrade - the first swap-out injection-based synchrotron light source”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUCD2, this conference.
- M. Kumada, K. Nakajima, H. Nakanishi, A. Ogata, and F. Q. Zhang, “Proposal of a Compact High Brightness Laser Synchrotron Light Source for Medical Applications”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP11C, pp. 2371-2373.
- V. Ptitsyn, “ERL-Ring and Ring-Ring Designs for the eRHIC Electron-Ion Collider”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 64-68.
- J. Kallestrup and F. Armborst, “TRIBs simulations for SLS 2.0”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM022, pp. 1031-1034.
- S. Tariq et al., “Design of the LBNF Beamline Target Station”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 146-148.
- B. Bing, T. M. Huang, Q. Ma, F. Meng, W. M. Pan, and K. X. Gu, “Design of Fundamental Power Coupler for High Intensity Heavy-ion Accelerator”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 183-185.
- G. S?®n?®cal et al., “GANIL High Intensity Transport Safety System”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper D-04, pp. 291-293.
- S. Cousineau et al., “Towards operational reality with laser assisted charge exchange”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS003, this conference.
Back to search