Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] B. Hounsell et al., “Optimization of a High Bunch Charge ERL Injection Merger for PERLE”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3983-3986. doi:10.18429/JACoW-IPAC2021-THPAB106
[n] V. Senaj, L. Ducimeti?¿re, and E. Vossenberg, “Upgrade of the Super Proton Synchrotron Vertical Beam Dump System”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD093, pp. 3314-3316.
[n] A. E. Ivanov, F. Gerigk, and A. Macpherson, “Direct Measurement of Thermoelectric Currents During Cool Down”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1139-1142. doi:10.18429/JACoW-SRF2019-THP095
[n] V. Kain et al., “Upgrades to the SPS-to-LHC Transfer Line Beam Stoppers for the LHC High-Luminosity Era”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1367-1370. doi:10.18429/JACoW-IPAC2016-TUPMR050
[n] E. Crosbie, A. Gorka, E. Parker, C. Potts, and L. Ratner, “Injection and Acceleration of Protons in the Zero Gradient Synchrotron (ZGS) by Stripping H- Ions”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1056-1060.
[n] J. Henderson, A. Aiken, E. Snedden, and N. Joshi, “Stabilised timing links for the CLARA test facility”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4131-4134. doi:10.18429/JACoW-IPAC2023-THPA072
[n] L. R. Evans and D. J. Warner, “Real-Time Measurements of Proton Bunch Form”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper P09, pp. 349-355.
[n] Y. C. Zhang, S. P. Li, H. H. Lu, S. C. Sun, and Y. F. Yang, “Preliminary Design of Cooling System for a PrFeB-based Cryogenic Permanent Magnet Undulator Prototype at IHEP”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2743-2745. doi:10.18429/JACoW-IPAC2014-WEPRI105
[n] E. H. R. Gaxiola et al., “Upgrade and Tests of the SPS Fast Extraction Kicker System for LHC and CNGS”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT016, pp. 566-568.
[n] R. Bodenstein et al., “Status of permanent magnet radiation resiliency studies at CEBAF”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 630-634. doi:10.18429/JACoW-NAPAC2025-WEAN02
[n] M. Delonca, T. Antonakakis, D. Grenier, C. Maglioni, and A. Sarrió Martínez, “A Clamped Be Window for the Dump of the HiRadMat Experiment at CERN”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP015, pp. 3758-3760.
[n] R. L. Gluckstern, R. K. Cooper, and R. Li, “Electric Polarizability and Magnetic Susceptibility of Small Holes in a Thin Screen”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 88-91.
[n] S. Gurov, P. A. Bak, D. Chernousov, P. V. Logatchev, V. Pavlov, and E. Pyata, “The Measurements of the Longitudinal Beam Profile on the Preinjector VEPP-5”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THOALH03, pp. 259-261.
[n] X. Y. Li, Z. Duan, D. Ji, Y. Jiao, and Y. F. Yang, “Effects of Insertion Devices on Stored Electron Beam of High Energy Photon Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 911-913. doi:10.18429/JACoW-IPAC2017-MOPVA026
[n] Y. F. Yang, H. H. Lu, S. C. Sun, and X. Z. Zhang, “Field Error Correction Considerations of Cryogenic Permanent Magnet Undulator (CPMU) for High Energy Photon Source Test Facility (HEPS-TF)”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4038-4040. doi:10.18429/JACoW-IPAC2016-THPOW041
[n] G. Arduini et al., “Status of the LHC Beam in the CERN SPS”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THAGB002, pp. 206-208.
[n] L. R. Evans, “LHC: Construction and Commissioning Status”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOXKI01, pp. 1-5.
[n] F. M. Velotti et al., “Demonstration of Loss Reduction Using a Thin Bent Crystal to Shadow an Electrostatic Septum During Resonant Slow Extraction”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3399-3403. doi:10.18429/JACoW-IPAC2019-THXXPLM2
[n] R. L. Gluckstern and R. K. Cooper, “Beam Breakup with Random Initial Displacement”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2398-2400.
[n] B. Hounsell, W. Kaabi, M. Klein, B. L. Militsyn, and C. P. Welsch, “Conceptual Design of the PERLE Injector”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 743-746. doi:10.18429/JACoW-LINAC2022-THPOJO26
[n] A. Antoine, C. Boucly, P. Juteau, N. Magnin, and N. Voumard, “First Operational Experience with the LHC Beam Dump Trigger Synchronisation Unit”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU019, pp. 1100-1103.
[n] A. Gilfellon, R. M. Jones, B. Muratori, A. Wheelhouse, and P. Williams, “Beam Dynamics Tracking Simulations for UK XFEL Under the Influence of Long-Range Dipole Wakefields”, presented at the IPAC'26, Deauville, France, May 2026, paper THP2085, unpublished.
[n] O. Brunner, A. Butterworth, G. Cavallari, N. Hilleret, J. M. Jimenez, and J. T??ckmantel, “First Experience with in situ Helium Processing of the LEP Superconducting Modules”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97A14, pp. 133-137.
[n] Y. Papaphilippou, R. Corsini, and L. R. Evans, “The SPS as an Ultra-low Emittance Damping Ring Test Facility for CLIC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPME042, pp. 1661-1663.
[n] R. H. Miller, “Measurements of the SLAC Injector Emittance”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper II-05, pp. 65-71.
[n] E. Gallet et al., “Automatic Post-operational Checks for the LHC Beam Dump System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP059, pp. 2653-2655.
[n] Z. Zhang, F. S. Chen, and Y. F. Yang, “The Magnetic Measurement of Conventional Magnets for Free-Electron Laser Project of Chinese Academy of Engineering Physics”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1115-1117. doi:10.18429/JACoW-IPAC2016-TUPMB006
[n] M. T. Hibberd et al., “Terahertz-Driven Acceleration of a Relativistic Electron Beam”, in Proc. IPAC'20, Caen, France, May 2020, paper TUVIR07, pp. XX-XX.
[n] L. R. Evans, “Advanced Technology Issues in the LHC Project”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 429-434.
[n] M. Green, R. Gupta, R. B. Palmer, and R. Scanlan, “Nb3Sn Magnets for a MUON Collider”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP22F, pp. 1990-1992.
[n] L. R. Evans and J. Gareyte, “Performance Limitations of the CERN SPS Collider”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2234-2237.
[n] B. Hounsell, W. Kaabi, M. Klein, B. L. Militsyn, T. C. Q. Noakes, and C. P. Welsch, “Re-optimisation of the ALICE Gun Upgrade Design for the 500-pC Bunch Charge Requirements of PERLE”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2071-2074. doi:10.18429/JACoW-IPAC2019-TUPTS066
[n] B. Hounsell and J. McKenzie, “Beam dynamics of the RUEDI diffraction beamline”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2079-2082. doi:10.18429/JACoW-IPAC2023-TUPL145
[n] C. Torregrosa et al., “The Hiradmat 27 Experiment: Exploring High-Density Materials Response at Extreme Conditions for Antiproton Production”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3705-3708. doi:10.18429/JACoW-IPAC2016-THPMY023
[n] N. Andreev et al., “Field Quality of Quadrupole R&D Models for the LHC IR”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP102, pp. 3194-3196.
[n] F. Yaman, W. Ackermann, and T. Weiland, “Comparison of Eigenvalue Solvers for Large Sparse Matrix Pencils”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper FRSAC2, pp. 287-289.
[n] C. T. Rogers and M. Ellis, “High Precision Measurement of Muon Beam Emittance Reduction in MICE”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPE013, pp. 1330-1332.
[n] A. Antoine, E. Carlier, and N. Voumard, “The LHC Beam Dumping System Trigger Synchronisation and Distribution System”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_020.
[n] L. Cowie et al., “RF design of the 1 kHz photoinjector for the RUEDI Electron Diffraction Facility”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP3074, unpublished.
[n] A. S. Aryshev et al., “Micron Size Laser-Wire System at the ATF Extraction Line, Recent Results and ATF-II Upgrade”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP023, pp. 3997-3999.
For LaTeX
Use Complete Form
For BibTeX
References
- B. Hounsell et al., “Optimization of a High Bunch Charge ERL Injection Merger for PERLE”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3983-3986.
- V. Senaj, L. Ducimeti?¿re, and E. Vossenberg, “Upgrade of the Super Proton Synchrotron Vertical Beam Dump System”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD093, pp. 3314-3316.
- A. E. Ivanov, F. Gerigk, and A. Macpherson, “Direct Measurement of Thermoelectric Currents During Cool Down”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 1139-1142.
- V. Kain et al., “Upgrades to the SPS-to-LHC Transfer Line Beam Stoppers for the LHC High-Luminosity Era”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1367-1370.
- E. Crosbie, A. Gorka, E. Parker, C. Potts, and L. Ratner, “Injection and Acceleration of Protons in the Zero Gradient Synchrotron (ZGS) by Stripping H- Ions”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1056-1060.
- J. Henderson, A. Aiken, E. Snedden, and N. Joshi, “Stabilised timing links for the CLARA test facility”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA072, pp. 4131-4134.
- L. R. Evans and D. J. Warner, “Real-Time Measurements of Proton Bunch Form”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper P09, pp. 349-355.
- Y. C. Zhang, S. P. Li, H. H. Lu, S. C. Sun, and Y. F. Yang, “Preliminary Design of Cooling System for a PrFeB-based Cryogenic Permanent Magnet Undulator Prototype at IHEP”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2743-2745.
- E. H. R. Gaxiola et al., “Upgrade and Tests of the SPS Fast Extraction Kicker System for LHC and CNGS”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT016, pp. 566-568.
- R. Bodenstein et al., “Status of permanent magnet radiation resiliency studies at CEBAF”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 630-634.
- M. Delonca, T. Antonakakis, D. Grenier, C. Maglioni, and A. Sarrió Martínez, “A Clamped Be Window for the Dump of the HiRadMat Experiment at CERN”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPP015, pp. 3758-3760.
- R. L. Gluckstern, R. K. Cooper, and R. Li, “Electric Polarizability and Magnetic Susceptibility of Small Holes in a Thin Screen”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 88-91.
- S. Gurov, P. A. Bak, D. Chernousov, P. V. Logatchev, V. Pavlov, and E. Pyata, “The Measurements of the Longitudinal Beam Profile on the Preinjector VEPP-5”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THOALH03, pp. 259-261.
- X. Y. Li, Z. Duan, D. Ji, Y. Jiao, and Y. F. Yang, “Effects of Insertion Devices on Stored Electron Beam of High Energy Photon Source”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 911-913.
- Y. F. Yang, H. H. Lu, S. C. Sun, and X. Z. Zhang, “Field Error Correction Considerations of Cryogenic Permanent Magnet Undulator (CPMU) for High Energy Photon Source Test Facility (HEPS-TF)”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4038-4040.
- G. Arduini et al., “Status of the LHC Beam in the CERN SPS”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THAGB002, pp. 206-208.
- L. R. Evans, “LHC: Construction and Commissioning Status”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOXKI01, pp. 1-5.
- F. M. Velotti et al., “Demonstration of Loss Reduction Using a Thin Bent Crystal to Shadow an Electrostatic Septum During Resonant Slow Extraction”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3399-3403.
- R. L. Gluckstern and R. K. Cooper, “Beam Breakup with Random Initial Displacement”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2398-2400.
- B. Hounsell, W. Kaabi, M. Klein, B. L. Militsyn, and C. P. Welsch, “Conceptual Design of the PERLE Injector”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 743-746.
- A. Antoine, C. Boucly, P. Juteau, N. Magnin, and N. Voumard, “First Operational Experience with the LHC Beam Dump Trigger Synchronisation Unit”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMU019, pp. 1100-1103.
- A. Gilfellon, R. M. Jones, B. Muratori, A. Wheelhouse, and P. Williams, “Beam Dynamics Tracking Simulations for UK XFEL Under the Influence of Long-Range Dipole Wakefields”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP2085, this conference.
- O. Brunner, A. Butterworth, G. Cavallari, N. Hilleret, J. M. Jimenez, and J. T??ckmantel, “First Experience with in situ Helium Processing of the LEP Superconducting Modules”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97A14, pp. 133-137.
- Y. Papaphilippou, R. Corsini, and L. R. Evans, “The SPS as an Ultra-low Emittance Damping Ring Test Facility for CLIC”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPME042, pp. 1661-1663.
- R. H. Miller, “Measurements of the SLAC Injector Emittance”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper II-05, pp. 65-71.
- E. Gallet et al., “Automatic Post-operational Checks for the LHC Beam Dump System”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP059, pp. 2653-2655.
- Z. Zhang, F. S. Chen, and Y. F. Yang, “The Magnetic Measurement of Conventional Magnets for Free-Electron Laser Project of Chinese Academy of Engineering Physics”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1115-1117.
- M. T. Hibberd et al., “Terahertz-Driven Acceleration of a Relativistic Electron Beam”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, paper TUVIR07, pp. XX-XX.
- L. R. Evans, “Advanced Technology Issues in the LHC Project”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 429-434.
- M. Green, R. Gupta, R. B. Palmer, and R. Scanlan, “Nb3Sn Magnets for a MUON Collider”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP22F, pp. 1990-1992.
- L. R. Evans and J. Gareyte, “Performance Limitations of the CERN SPS Collider”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2234-2237.
- B. Hounsell, W. Kaabi, M. Klein, B. L. Militsyn, T. C. Q. Noakes, and C. P. Welsch, “Re-optimisation of the ALICE Gun Upgrade Design for the 500-pC Bunch Charge Requirements of PERLE”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2071-2074.
- B. Hounsell and J. McKenzie, “Beam dynamics of the RUEDI diffraction beamline”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL145, pp. 2079-2082.
- C. Torregrosa et al., “The Hiradmat 27 Experiment: Exploring High-Density Materials Response at Extreme Conditions for Antiproton Production”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3705-3708.
- N. Andreev et al., “Field Quality of Quadrupole R&D Models for the LHC IR”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP102, pp. 3194-3196.
- F. Yaman, W. Ackermann, and T. Weiland, “Comparison of Eigenvalue Solvers for Large Sparse Matrix Pencils”, in Proc. 11th Int. Computational Accelerator Physics Conf. (ICAP'12), Rostock-Warnemunde, Germany, Aug. 2012, paper FRSAC2, pp. 287-289.
- C. T. Rogers and M. Ellis, “High Precision Measurement of Muon Beam Emittance Reduction in MICE”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPE013, pp. 1330-1332.
- A. Antoine, E. Carlier, and N. Voumard, “The LHC Beam Dumping System Trigger Synchronisation and Distribution System”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P3_020.
- L. Cowie et al., “RF design of the 1 kHz photoinjector for the RUEDI Electron Diffraction Facility”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUP3074, this conference.
- A. S. Aryshev et al., “Micron Size Laser-Wire System at the ATF Extraction Line, Recent Results and ATF-II Upgrade”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP023, pp. 3997-3999.
Back to search